Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

16--Circuit Card Assy

Active
SPRPA117QZ033Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

DLA Aviation Philadelphia is seeking contractors capable of providing all necessary labor, materials, and facilities to manufacture a specific circuit card assembly identified by NSN 7RH 5998 015928624 GF and part number 88003259-104. This procurement will be conducted under a sole-source or limited-source authority per FAR 6.302-1, indicating that the government plans to negotiate with a restricted number of approved suppliers. The government lacks the internal data required to manufacture this item, so interested and capable suppliers are invited to express interest and submit capability statements within 15 days of the notice publication date. While this is not a solicitation for competitive proposals, all responses received in that timeframe may influence the government’s decision on whether to compete the contract. Only approved sources will be solicited for the award, and source approval may be required for those not currently approved. However, contract award will not be delayed pending source approval, as the approval process typically takes longer than the contract award timeline. Contractors seeking source approval must submit the appropriate documentation as outlined in the Source Approval Information Brochure for Spares, which is publicly available online. This contract opportunity falls under NAICS code 334412 and is managed by the Department of Defense's Navsup Weapon Systems Support office located in Philadelphia, PA.

General Info

DLA Aviation seeks sole-source contractors to manufacture a specific circuit card assembly with limited-source negotiation.

NAICS

334412 - Bare Printed Circuit Board Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
ContactsNo contacts available
OfficePHILADELPHIA, PA, 19111-5098, USA
Office AddressPHILADELPHIA, PA, 19111-5098, USA
ContactsNo contact information available

Full Description

Show more
DLA Aviation Philadelphia is seeking eligible contractors to furnish effort including labor, material, and facilities as may be required to manufacture the items as specified within this document. The Government intends to solicit and negotiate with only one source or a limited number of responsible sources under the authority of FAR 6.302-1. The Government intends to solicit for the procurement of: NSN: 7RH 5998 015928624 GF ITEM NAME: CIRCUIT CARD ASSEMB Part Number: 88003259-104 The Government does not possess the data necessary to perform the required manufacture of the item. All responsible sources may express their interest and provide capability statements in response to this notice. This notice of intent is not a request for competitive proposals. However, all proposals received within 15 days after the date of publication of this Sources Sought Notice may be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Only approved sources will be solicited, and source approval may be required. DLA Aviation Philadelphia will not delay award while source approval is pending. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in Source Approval Information Brochure for Spares. Additional information for submitting a Source Approval Request package can be obtained at: https://www.navsup.navy.mil/navsup/ourteam/navsupwss/business_opps/SAR%20Spares%20Brochure.pdf

Similar Contracts

Same NAICS industry code

NAICS: 334412
New
DIBBS
TEST SET, ELECTRICAL CA
Solicitation # SPE7M1-27-U-1066
Solicitation SPE7M1-27-U-1066 is a fixed-price, indefinite-quantity procurement issued by the DLA Weapons Support Maritime Supply Chain for the supply of electrical cable test sets, identified by NSN 6625016189784 and Silvertronic Limited part number 905316. The requirement consists of an estimated quantity of 266 units with a delivery timeframe of 71 days after order. Terms are FOB Origin, with inspection and acceptance occurring at the destination. This procurement is not a small business set-aside, and price evaluation will be based on the quotes provided for the estimated annual demand. The contractor must adhere to strict packaging and labeling standards, including MIL-STD-129 and RP001 for palletization. Hazardous materials must be handled according to FED-STD-313 and TQ requirement IP025, while non-hazardous items follow ASTM D3951, though DLA Master List requirements take precedence. Key quality stipulations include RQ011 for the removal of government identification from non-accepted supplies and RQ035 regarding the potential presence of batteries. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with DFARS regulations regarding cybersecurity, domestic material restrictions such as the Buy American Act, and the prohibition of covered defense telecommunications equipment.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334412
New
MODULE,TEMP ALARM — 5998016834654 — N0010427QBB99
Solicitation # N0010427QBB99
This solicitation, number N0010427QBB99, is a request for quotation for the supply and repair of the Module, Temp Alarm (NIIN 016834654). The procurement is managed by the Navsup Weapon Systems Support Mech agency and will be awarded to the responsible offeror providing the lowest priced, technically acceptable offer. Technical acceptability is based on compliance with the instructions in Section L and the absence of exceptions to the solicitation terms. The contractor is required to adhere to Technical Data Package version 002 and must review the mandatory Individual Repair Part Ordering Data (IRPOD) available via the BPMI website. Key requirements include the submission of a Certificate of Compliance per DI-MISC-81356 at the time of material delivery. The contractor must maintain a government-acceptable inspection system, with inspection and acceptance occurring at the contractor's or subcontractor's plant. Packaging must comply with MIL-STD-2073-1 for stock shipments and MIL-STD-129 for marking, with specific requirements for DLR labels and hazardous materials. The contract mandates strict adherence to export controls (NOFORN), the exclusion of mercury, and cybersecurity standards per NIST SP 800-171 and DFARS 252.204-7012. Invoicing is to be processed electronically through the Wide Area WorkFlow (WAWF) system.
Navsup Weapon Systems Support Mech

POSTED

4 days ago

DEADLINE

in 28 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 332919
New
Federal
48--VALVE,BUTTERFLY, IN REPAIR/MODIFICATION OF
Solicitation # N0038327QNA15
This solicitation, issued by Navsup Weapon Systems Support, requires the teardown, evaluation, repair, and modification of 10 butterfly valves (NSN 4820-01-472-9777) to return them to a Ready for Issue condition. The work is to be performed by Hamilton Sundstrand Corporation in Windsor Locks, Connecticut, with a delivery timeframe of 90 days. The contractor is responsible for providing all necessary labor, materials, and tooling, and must adhere to strict quality standards, including ISO 9001 or SAE AS9100 certification and calibration systems meeting ANSI/NCSL Z540.3 or ISO-10012-1. The contract is governed by the terms and conditions of BOA/LTC N0038322GZW01 and requires compliance with MIL-STD-130 for markings and MIL-STD-2073 for packaging. Key administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and receiving reports per DFARS 252.232-7006. The contractor must maintain detailed historical record files for each serial number and follow specific protocols for items determined to be Beyond Economical Repair, defined as repair costs exceeding 75 percent of the current production replacement price. Additionally, the contractor must notify DCMA regarding any items Missing on Induction and is prohibited from cannibalizing parts without specific approval from NAVSUP WSS and the BDE. Inspection and acceptance will occur at the origin, and the contractor must maintain a proper enclosed warehouse environment to prevent damage to assets awaiting repair or shipment.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 3 days
View Details
NAICS: 336413
New
Federal
AIRCRAFT COMPONENTS
Solicitation # N0038327QLA21
Solicitation N00383-27-Q-LA21 is a sole-source requirement issued by NAVSUP Weapon Systems Support for the repair, overhaul, and modification of aircraft components, specifically oxygen bed assemblies. The scope of work requires the contractor to provide all necessary labor, materials, and tooling to restore items to a Ready For Issue condition in accordance with technical drawings and industry standards. Key deliverables include the repaired components and the maintenance of detailed historical record files for each serial number, covering receipt inspection, repair travelers, and acceptance test data. The contract specifies a one-year induction period and mandates that all work be performed at an approved facility, with strict prohibitions against the use of MIL-W-81381 wire. The government will make a single award based on a determination of the most advantageous offer, prioritizing past performance over price. Technical compliance is heavily emphasized, requiring the contractor to maintain a quality management system conforming to ISO 9001 or SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. Packaging and marking must adhere to MIL-STD-2073, MIL-STD-129, and MIL-STD-130, with specific oxygen clean requirements per MIL-STD-1330. Administrative requirements include the use of Wide Area WorkFlow for invoicing and strict adherence to Government Source Approval and configuration management protocols.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 21 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS