Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

16--CYLINDER ASSEMBLY,R, IN REPAIR/MODIFICATION OF

Active
N0038326QBB21Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This presolicitation notice from the Department of Defense, Navsup Weapon Systems Support, concerns the acquisition of 13 cylinder assemblies under NSN 7R-1680-015616395-CB and reference number CA55123-001. The delivery terms are set as FOB Origin. Due to the specialized nature of the parts, engineering source approval by the design control activity is mandatory to ensure quality standards are met. The requirement specifies that the parts must be acquired from approved sources who possess unique design capabilities, technical data, and manufacturing knowledge not economically available to the government. Any alternate source seeking to provide these components must undergo a rigorous qualification process approved by the cognizant government engineering activity. Interested parties should refer to solicitation N0038326QBB21, with a response deadline of October 22, 2026.

General Info

DoD seeks 13 cylinder assemblies; approved sources required by October 22, 2026.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

333995 - Fluid Power Cylinder and Actuator ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
BRETT KILLEN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NSN 7R-1680-015616395-CB, REF NR CA55123-001, QTY 13 EA, DELIVERY FOB ORIGIN. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing/repair knowledge by the qualified source(s) require acquisition/repair of the part from the approved source(s). The approved source(s) retain data rights,manufacturing/repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.

Similar Contracts

Same NAICS industry code

NAICS: 333995
New
Federal
05F |C/CK-135 | HEAD, LINEAR ACTUATING CYLINDER
Solicitation # 006927492
This procurement is for an indefinite quantity contract for the supply of linear actuating cylinder heads, identified by NSN 1650-006927492. The contract is issued by DLA Aviation and is designated as a total small business set-aside. The agreement covers a base period of five years with no additional options, featuring an estimated annual requirement of 30 units. Production units are expected to be delivered within 365 days, with FOB, inspection, and acceptance all occurring at the origin. The part is manufactured by UDT, Inc. and The Boeing Company under part number 9-67035-3. The solicitation is scheduled for release around October 2, 2026, and will be available exclusively through the DLA Internet Bid Board System. Interested parties must submit their responses by the deadline of November 2, 2026. Primary coordination for this effort is managed by Ryan Loeffelholz in Richmond, Virginia.
DLA Aviation

POSTED

about 2 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 333995
New
DIBBS
Supply of Cartridge Valves (NSN 4820-01-190-4207)
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333995
New
DIBBS
Axial Fan Impeller Supply (NSN 4140-01-037-5387)This subcontract with the Department of Defense ASC Supplier Oper OEM Division involves the procurement of six Axial Fan Impellers under NSN 4140-01-037-5387. The selected provider is responsible for manufacturing or sourcing these parts using precision machining or casting to ensure they meet the specified technical data package. All items must be packaged and labeled according to government standards for FOB Origin shipment. The contract falls under NAICS code 333995 and is managed through the DLA supply chain. Performance is centered in Tracy, California, with a total delivery requirement of 6.000 units. The solicitation period concludes on September 25, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333995
New
DIBBS
Supply of Electrical Fuel Pumps (NSN 015776952)
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
DIBBS
Manufacturing of Fluid Pressure Regulating Valves (NSN 4820013293498)This subcontract involves the manufacturing and supply of fluid pressure regulating valves for prime contractors supporting DLA Land and Maritime hardware projects. The scope of work includes the fabrication of valve bodies and internal components through casting and forging processes, as well as the development of specialized tooling for NSN 4820013293498. The contractor is required to deliver 18 finished valves, ensuring all packaging and marking strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards. This project is managed under the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
DIBBS
Supply of Safety Relief Valves (NSN 4820014891821)This subcontract involves the supply of 13 Safety Relief Valves for prime contractors supporting DLA Land and Maritime hardware contracts. The provider is responsible for manufacturing or sourcing valves that strictly adhere to NSN 4820-01-489-1821 specifications, ensuring all items are packaged according to RP001 and marked in compliance with MIL-STD-129. The requirement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Interested parties must respond by September 28, 2026, under NAICS code 333995.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
DIBBS
Engine Priming Pump (Fuel Pick Up Assembly) Supply
LAND SUPPLIER OPNS ENGINES

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
DIBBS
Supply of Hydraulic Cartridges for DehydratorThis subcontract involves the supply of eight specialized hydraulic cartridges, identified by NSN 4820010385550, for the DDSP New Cumberland Facility under the Department of Defense. The components must feature a nominal size of 3/8 inch and be capable of operating in temperatures up to 400 degrees Fahrenheit, utilizing fluorocarbon seals as specified by Admiral Valve LLC P/N 365-2M. All deliverables must strictly adhere to MIL-STD-129, RP001, and MIL-STD-2073-1E packaging standards. The project falls under NAICS code 333995, with the place of performance located in New Cumberland, Pennsylvania. The solicitation was posted on September 17, 2026, with a response deadline of September 28, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
DIBBS
Manufacture and Supply of Fuel Valve and Bearing AssembliesThis subcontract for the ASC Commodities Division of the Department of Defense involves the manufacture and supply of four finished fuel valve and bearing assemblies. The contractor must utilize precision machining equipment to produce components that adhere to the DLA Master List of Technical and Quality Requirements, specifically following RA001 for manufacturing, RQ017 for physical identification and bare item marking, and RP001 for packaging standards. The project requires a CMMC Level 2 Self-Assessment to ensure cybersecurity compliance. Performance will take place in Cherry Point, and the response deadline for this opportunity is September 25, 2026.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333995
New
DIBBS
Supply of NSN 4820-01-53-6619-0 ValvesThis subcontract through the Department of Defense DDSP New Cumberland Facility involves the supply of 318 units of NSN 4820-01-53-6619-0 valves for prime contractors fulfilling DLA supply contracts. The selected provider must manufacture or source the items according to the technical data package, certify that there is no mercury content, and perform and certify all necessary hydrostatic testing. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. Final delivery requires the submission of 318 units accompanied by signed hydrostatic test reports. The performance location is designated as New Cumberland, Pennsylvania, under NAICS code 333995.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
DIBBS
Supply of Valve Pilots (NSN 2995-00-817-1875)This subcontract involves the manufacture or sourcing of five valve pilots under NSN 2995-00-817-1875 for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The contractor must adhere to the DLA Master List of Technical and Quality Requirements, ensuring all units are packaged according to MIL-STD-2073-1E and marked per MIL-STD-129. Performance will take place in Cherry Point, and the final deliverable consists of five packaged and marked valve pilots. Compliance requirements include mandatory US/Canada Joint Certification Program certification and adherence to DFARS 252.204-7012. The opportunity falls under NAICS code 333995, with a response deadline of September 25, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333995
New
PISTON, LINEAR ACTU — 3040013904859 — SPRMM126QKH33
Solicitation # SPRMM126QKH33
This presolicitation, issued by the DLA Mechanicsburg under solicitation number SPRMM126QKH33, is for the procurement of 23 linear actuator pistons identified by NSN 7H-3040-013904859. The delivery terms are established as FOB Origin, and the contract falls under NAICS code 336350. Responses are due by September 10, 2026. Waukesha Bearings Corporation, identified by Cage Code 07332, is the sole approved source of supply. The government has determined that it is uneconomical to reverse engineer the part or purchase the necessary data rights to allow for additional sources of supply or repair.
SPRMM1 DLA Mechanicsburg

POSTED

1 day ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 336415
New
Federal
16--BOOSTER ASSEMBLY,AI, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QSC34
This presolicitation from the Department of Defense, managed by Navsup Weapon Systems Support, is for the repair or modification of 13 booster assemblies under solicitation number N0038326QSC34. The delivery terms are FOB Origin, and the requirement is based on TDP version 001. Due to the flight critical nature of the item and the fact that the current design is considered unstable with low process yield or marginal performance, the part is subject to upcoming major configuration changes that may render the current version obsolete. Because of these technical constraints, government source approval is mandatory prior to the contract award. Only previously approved sources have been solicited, and any new applicants must submit comprehensive documentation as outlined in the NAVSUP WSS Source Approval Information Brochures to be considered. The response deadline for this requirement is November 3, 2026, and the acquisition may be subject to the Buy American Act and various Free Trade Agreements.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336412
New
Federal
28--CASE,AUGMENTOR,AIRC, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QSC12
This contract is a solicitation from the Navsup Weapon Systems Support for the repair and overhaul of aircraft augmentor cases. The contractor is responsible for returning the assets to a Ready For Issue condition, utilizing their own facilities, labor, and tooling. Key performance requirements include a Repair Turnaround Time of 45 days after receipt of the asset and an induction expiration date set for 365 days after the contract award. The contractor must adhere to strict quality standards, including ISO 9001 or SAE AS9100, and maintain a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. The agreement outlines specific protocols for handling assets that are Beyond Economical Repair, Missing on Induction, or requiring Over and Above Repair, all of which require written concurrence from DCMA and the Procuring Contracting Officer. All parts and materials used must be new per FAR 52.211-5, and the use of MIL-W-81381 wire is explicitly prohibited in favor of SAE-AS22759 series wire. The contract also specifies that the contractor is responsible for all inspection requirements and must maintain comprehensive historical record files for each serial number processed.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332710
New
Federal
59--NRP,CCA,MOTHERBOARD, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QNA90
This contract is a solicitation from the Navsup Weapon Systems Support for the repair, overhaul, and modification of NRP, CCA, and Motherboard components. The contractor is responsible for providing all necessary labor, materials, and test equipment to return these items to a Ready For Issue condition at their facility in Vergennes, Vermont. Key requirements include strict adherence to engineering drawings, the use of SAE-AS22759 series wire instead of MIL-W-81381, and compliance with ISO 9001 or SAE AS9100 quality standards. The agreement establishes specific protocols for items that are Beyond Economical Repair (BER), Missing on Induction (MOI), or requiring Over and Above Repair (OAR), all of which require written concurrence from the Defense Contract Management Command and the Procuring Contracting Officer. The contractor must maintain comprehensive historical records for each serial number and implement a rigorous quality control system. A one-year warranty is provided for supplies of a noncomplex nature, and the contractor is prohibited from cannibalizing parts without explicit government approval.
Machine Shops

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333612
New
Federal
30--TRANSMISSION,MECHAN, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPC10
Solicitation NO0338-26-QP-C10, issued by NAVSUP Weapon Systems Support Philadelphia, seeks a single award for the overhaul, upgrade, repair, and inspection of mechanical transmissions (NSN 3010-123915959). The objective is to return these assets to a Ready for Issue condition in accordance with the latest technical publications. The contract specifies a Repair Turnaround Time of 90 days after receipt of the asset, with an induction period of one year from the date of award. Work is to be performed by Goldhofer Airport Technology GmbH in Germany, and the government requires adherence to ISO 9001/SAE AS9100 quality standards and ANSI/NCSL Z540.3 or ISO-10012-1 calibration systems. The award will be based on a combination of price and past performance, with past performance weighted as the more important factor. Key contractual requirements include the use of the Wide Area Workflow system for invoicing, compliance with MIL-STD-2073-1 for packaging, and adherence to MIL-STD-129 for marking. The contractor is responsible for providing all labor, materials, and tooling, with a requirement that all parts be new per FAR 52.211-5 unless otherwise approved. Specific provisions are included for handling Beyond Economical Repair items, Missing on Induction components, and Over and Above Repair efforts, all of which require DCMA concurrence and PCO approval. Inspection and final acceptance will occur at the contractor's facility.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 28 days
View Details
NAICS: 336413
New
Federal
16--BRAKE ASSEMBLY,BACK, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QSB84
This solicitation, issued by the Navsup Weapon Systems Support, seeks a contractor to provide repair, overhaul, and testing services for the Back Brake Assembly (NSN 1630-015988226). The contractor is responsible for returning units to a Ready For Issue condition in accordance with technical drawings and industry standards. Key requirements include maintaining a quality control system compliant with ISO 9001 or SAE AS9100, adhering to MIL-STD-130 markings, and utilizing SAE-AS22759 series wire instead of MIL-W-81381. The contractor must provide all necessary tooling and facilities, as the government will not provide manufacturing aids. The contract establishes specific protocols for Beyond Economical Repair (BER) determinations, Missing on Induction (MOI) components, and Over and Above Repair (OAR) efforts, all of which require written concurrence from DCMA and the Procuring Contracting Officer. Strict guidelines are set for purchased material control, requiring inspection reports and a 12-month record retention period. The designated repair source is Triumph Gears Systems Inc in Park City, Utah. All offers must include government source approval, and the contract is structured as a firm fixed price unless otherwise determined by the PCO.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
16--TORQUE LIMITER ASSE, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBB23
This presolicitation notice, issued by the Navsup Weapon Systems Support under the Department of Defense, seeks the repair or modification of 133 torque limiter assemblies. The requirement is identified by NSN 7R-1680-015757642-GF and follows TDP version 001, with delivery terms specified as FOB Origin. The solicitation, numbered N0038326QBB23, was posted on September 18, 2026, with a response deadline of October 22, 2026. Interested parties should coordinate with the primary point of contact, Brett Killen, at the office located in Philadelphia, Pennsylvania.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
28--ENGINE,DIESEL, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPD19
This solicitation, number N0038326QPD19, is for the repair or modification of two diesel engines under NSN 7R-2815-014553705-SX, with delivery terms set as FOB Origin. The requirement is managed by the Navsup Weapon Systems Support office in Philadelphia. Because the items are flight critical and the government lacks sufficient technical data for open competition, the contract requires government source approval prior to award. Only previously approved sources have been solicited, and any new applicants must submit detailed information according to the NAVSUP WSS Source Approval Information Brochures to be considered. Proposals must be submitted by November 3, 2026. The government will not use FAR Part 12 policies for this acquisition, though interested parties may notify the contracting officer of their ability to provide a commercial item within 15 days of the notice.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 333998
New
Federal
16--MODULE,DRIVE,AIRCRA, IN REPAIR/MODIFICATION OF
Solicitation # NO0383-26-R-BA65
Solicitation NO0383-26-R-BA65, issued by Navsup Weapon Systems Support, is a firm-fixed price procurement for the overhaul, upgrade, repair, testing, and inspection of aircraft drive modules, specifically part number 1680-01-523-8276. The objective is to return these units to a Ready for Issue condition, ensuring they perform reliably in their intended operational environment. The contract spans a total of two years, with the contractor required to provide all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids such as fixtures, jigs, or special test equipment. Key technical requirements include a strict prohibition of MIL-W-81381 wire, which must be replaced by SAE-AS22759 series wire, and a requirement for personnel to be certified under IPC/EIAJ-STD-001C if MIL-STD-454 is referenced. The contractor must maintain a quality system conforming to ISO 9001/SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1 standards. Specific provisions are established for Beyond Economical Repair and Missing on Induction determinations, both of which require DCMA concurrence. Packaging must adhere to MIL-STD-2073, and shipment marking must comply with MIL-STD-129 and MIL-STD-130. Invoicing and reporting are managed through the Wide Area Workflow system, with inspection and acceptance occurring at the origin.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 27 days
View Details
NAICS: 336413
New
Federal
15--LIMITER,TORQUE,AIRC, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBB24
This presolicitation by the Department of Defense, specifically Navsup Weapon Systems Support, is for the procurement of 68 aircraft torque limiters under NSN 7R-1560-014788326-QE and reference number 2746330-1. The delivery terms are set as FOB Origin. Due to the specialized nature of the part, it requires engineering source approval by the design control activity to ensure quality standards are maintained. The contract emphasizes that the approved sources possess unique design capabilities, technical data, and manufacturing knowledge that are not economically available to the government. Consequently, acquisition or repair must be handled by these qualified sources unless an alternate source successfully completes the qualification procedures approved by the cognizant government engineering activity. Interested parties must respond by October 22, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334519
New
Federal
CABLE ASSEMBLY,INTE
Solicitation # N0038326QPD20
This solicitation, issued by the Navsup Weapon Systems Support under the Department of Defense, seeks quotes for the procurement of 26 units of eddy current probes and integrated cable assemblies. The specific items are identified by NIINs 016964382 and 017066743, with corresponding part numbers M7L905-50-EMC and 10-030829-00. The contract includes a 12-month warranty for supplies of a noncomplex nature and requires adherence to Buy American and Free Trade Agreement protocols. A critical requirement for this award is government source approval. Offerors who are not already approved must submit the necessary documentation detailed in the NAVSUP WSS Source Approval Brochure along with their proposal to be considered. Quotes must be submitted via email to the primary point of contact by the deadline of October 19, 2026. Early and incremental deliveries are accepted and preferred for this requirement.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--SRL POWER SUPPLY, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBA90
This solicitation from Navsup Weapon Systems Support is for the repair and overhaul of the SRL Power Supply (P/N 2000792-1, NSN 1680-01-618-5503) to return the units to a Ready For Issue condition. The contractor is responsible for providing all necessary labor, materials, and tooling, as the government will not provide manufacturing aids. Work must be performed in accordance with L3 Harris Technologies Inc drawings and specifications, with a specific requirement for the contractor to maintain a quality system conforming to ISO 9001 or SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1 standards. Key contractual provisions include strict guidelines for Beyond Economical Repair (BER) determinations, which occur if repair costs exceed 75% of the replacement price, and protocols for Missing on Induction (MOI) components. Over and Above Repair (OAR) efforts may be subject to equitable adjustments upon approval from the Procuring Contracting Officer. The contractor must adhere to MIL-STD-130 for markings and MIL-STD-2073 for packaging. Bidders are requested to submit quotes as either a firm-fixed price or Test, Teardown, and Evaluation (TT&E) pricing.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334220
New
Federal
59--COUPLER,ANTENNA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBB07
This contract is a solicitation from the Navsup Weapon Systems Support for the repair, overhaul, and modification of antenna couplers (P/N 014638400). The contractor is responsible for providing all necessary facilities, labor, materials, and tooling to return the items to a Ready For Issue condition. Work must be performed at the ECI Defense Group Inc. facility in Lawrenceville, Georgia, adhering to MIL-STD-130 markings and specific wiring requirements, including the mandatory use of SAE-AS22759 wire instead of MIL-W-81381. The agreement mandates a strict quality management system compliant with ISO 9001 and AS9100 standards. Key operational provisions include specific protocols for Beyond Economical Repair (BER) determinations, Missing on Induction (MOI) components, and Over and Above Repair (OAR) efforts, all of which require written concurrence from the DCMA and the Procuring Contracting Officer. The contractor is responsible for maintaining detailed historical records for each serial number and ensuring all purchased materials are new and inspected upon receipt.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS