Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TURBINE WHEEL, AIRCR

Active
SPE4A5-26-T-321GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 30 turbine wheels for aircraft applications, identified by part number 205424 and NSN 1660-00-594-7233, sourced from Honeywell International Inc. The item is classified as a commercial item and is designated as a critical application component, requiring strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other specifications. Compliance with MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for palletization is mandatory, with all packaging subject to DLA’s overarching requirements. The contract mandates zero non-conformances in sampling under MIL-STD-1916 or equivalent zero-based plans, with attribute verification levels assigned per critical, major, and minor characteristics. Delivery is scheduled for 739 days after award, with FOB origin shipment terms and inspection and acceptance occurring at destination. The unit of issue is each, with no variance permitted in quantity. The delivery address is the DLA Distribution Depot in Tinker AFB, Oklahoma, and the need ship date is August 21, 2028, with an original required delivery date of November 1, 2028. Cybersecurity requirements include CMMC Level 2 self-assessment, and the contractor must comply with all applicable defense information handling standards. The item is not required to carry Unique Identification under DFARS 252.211-7003, as specified by the service customer. The contract was issued under solicitation SPE4A5-26-T-321G, with a response deadline of August 12, 2026, and is managed by the Department of Defense’s ASC Supplier Operations OEM Division.

General Info

Procure 30 turbine wheels NSN 1660005947233 from approved source, deliver to Oklahoma by 739 days, e-submit by August 12, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-321G.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
EVGENY KOROVIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TURBINE WHEEL,AIRCR
TURBINE WHEEL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
--
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
--
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
--
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC. 70210 P/N 205424
SPE4A5-26-T-321G
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017740512 0001 EA 30.000
NSN/MATERIAL:1660005947233
DELIVERY (IN DAYS):0739
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:08/21/2028 Original Required Delivery Date:11/01/2028
SPE4A5-26-T-321G
SECTION B
PR: 7017740512 PRLI: 0001 CONT’D

SPE4A5-26-T-321G NSN/Part Number: 1660-00-594-7233 Quantity: 30 EA Purchase Request: 7017740512QTY: 30 Delivery: 739 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336411
New
DIBBS
SCREW, EXTERNALLY RELIE
Solicitation # SPE4A6-26-T-11ZH
The contract specifies the procurement of 94 screws with an externally relieved body, identified by NSN 5305-01-296-2846, under solicitation SPE4A6-26-T-11ZH, with a delivery deadline of 171 days from order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with the revision in effect at the solicitation issue date for simplified acquisitions. Packaging must adhere to DLA packaging standards, and non-accepted supplies must have government identification removed prior to return. Sampling and inspection procedures follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major unless otherwise stated. The item includes technical data subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and access is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of DOD export-controlled data training, and approval by DLA to handle such data. The contract is issued by the Defense Logistics Agency’s ASC Commodities Division, with performance located in New Cumberland, PA, and all technical requirements are accessible through the DLA eProcurement portal.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-913H
The contract pertains to the procurement of a single gasket with National Stock Number 5330-12-322-7856 and part number 5550740780, to be delivered in one unit under solicitation SPE7L1-26-T-913H. The item must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, particularly due to its use in Federal Supply Classes 5330/5331. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods including dry preservation and cushioning material JB, and markings must comply with MIL-STD-129, including the special shelf-life code 32. The gasket is explicitly exempt from asbestos under FED-STD-313, and multiple manufacturer part numbers are acceptable as listed. Delivery is FOB destination with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The delivery window is twenty days from the award date, with an original required delivery date of July 31, 2026, and shipping must be by the fastest traceable means, excluding parcel post, to the designated FPO address via Vessel Shipment RDD 777. The contract incorporates all referenced technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or amendment date. Government use identifiers and shipping codes are provided for logistics tracking, and the primary point of contact is Kristina Derry at DLA Land and Maritime.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336411
New
DIBBS
BRACKET ASSEMBLY, MICROPHONE, OXYGEN MASK
Solicitation # SPE4A7-26-R-0713
The contract is for a Bracket Assembly, Microphone, Oxygen Mask with NSN 1660-011138365 and WSIC F, procured by DLA Aviation under solicitation SPE4A726R0713. It will be awarded as an indefinite quantity contract with a five-year base period and no options, targeting an annual quantity of 5,404 units, with minimum and maximum delivery order quantities of 1,056 and 5,404 units respectively. First Article Testing is mandatory, and the delivery timeline includes 150 days to submit test samples, 150 days for government evaluation and notification, followed by 195 days for production delivery, totaling 495 days. Inspection and acceptance occur at origin, with FOB origin terms. This is a DLA direct procurement and is not designated as a critical safety item. The solicitation is issued as a 100% small business set-aside, and awards will be based on equal weighting of price, past performance, and delivery, with final decisions possibly incorporating SPRS and other evaluation factors as detailed in the solicitation. Offers must be submitted in writing. The solicitation will be publicly posted on the DLA Internet Bid Board System (DIBBS) on or around August 4, 2026, with no paper copies available. Interested parties must access the full solicitation in PDF format via DIBBS, requiring Adobe Acrobat Reader. The response deadline for submissions is September 3, 2026. The point of contact is Thuy Ho at Thuy.Ho@dla.mil, with the issuing office located in Richmond, Virginia. The NAICS code is 336411, reflecting classification under Aircraft and Parts Manufacturing, and the contracting activity falls under the Department of Defense’s DLA Aviation.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336411
New
DIBBS
DISK, VALVE
Solicitation # SPE4A5-26-T-326T
This contract specifies the procurement of a metallic disc valve, identified by part number 2284W225 and NSN 1660997394942, with a quantity of 14 units. The item is subject to technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must comply with sampling protocols per MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances unless otherwise stipulated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are treated as major. The supplier must adhere to DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization must follow DLA packaging requirements and be grouped in lots of 200 per intermediate container. The valve is to be delivered FOB origin within 171 days to Tinker AFB, Oklahoma, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Cybersecurity requirements include CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. Unit of issue is each, and the contract includes transportation directives referencing DLAD procedural notes C19 and C20. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under NAICS code 336411, managed by the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-911M
The contract pertains to a single gasket item identified by NSN 5330-01-313-3578, with a required delivery within 20 days of award, and is classified as a commercial item including commercial of a type. It is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect on the solicitation issue date. The gasket must be packaged in a medium duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation, and this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The item must be free of asbestos, and any alternative materials require approval per Clause L30 and Provision 4 conditions. The contractor must be CMMC Level 2 certified through a qualified third-party assessment organization, and all items must comply with MIL-STD-130N for identification marking of U.S. military property. Government identification must be removed from non-accepted supplies, and covered defense information handling is required. The solicitation, issued under SPE7L1-26-T-911M, has a response deadline of August 17, 2026, and performance is to occur in Huntsville, Alabama, with Kristina Derry listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336411
New
DIBBS
BODY, VALVE ASSEMBLY
Solicitation # SPE4A5-26-T-326P
The contract specifies the procurement of a BODY, VALVE ASSEMBLY with part number 2515W750 and NSN 1660995356040, requiring three units to be delivered FOB origin within 171 days, with a required ship date of January 31, 2027, and original delivery deadline of November 12, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. The item is not subject to Unit Unique Identification per DFARS 252.211-7003(c)(1)(i), and physical marking must follow RQ017. Acceptance occurs at destination with zero non-conformances required under sampling standards such as MIL-STD-1916 or ASQ H1331, and unspecified attributes are treated as major with an AQL of 1.0. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and all materials must adhere to DLA’s procurement and transportation directives including freight shipping to the DDSP New Cumberland Facility in Pennsylvania. The contract enforces a strict 0% variance on quantity and specifies inspection and acceptance points at the destination, with unit of issue as individual units and pricing set at $3.00 per unit.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-911D
The contract is for the procurement of one gasket with NSN/Part Number 5330-01-311-9345 under solicitation SPE7L1-26-T-911D, with a response deadline of August 17, 2026, and a delivery requirement of 20 days after delivery order. The item is subject to stringent technical and quality standards incorporated from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. The use of Class I ozone-depleting chemicals is strictly prohibited in the manufacture or incorporation of the gasket, and any substitute materials must be submitted for approval unless explicitly authorized by specification requirements. The contractor must be certified at Cybersecurity Maturity Model Certification Level 2 by a DLA-recognized third-party assessment organization, as the item involves covered defense information. Technical data associated with the gasket is subject to export controls under either ITAR or EAR, and disclosure to foreign persons, including foreign nationals within the U.S., is restricted. Access to this controlled data is limited to contractors with an approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and formal approval from DLA. The place of performance is Huntsville, Alabama, and primary point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336411
New
Federal
Drone Marketplace Onboarding of Group 3 UAS
Solicitation # W58RGZ-26-S-C001-0008
The U.S. Army Contracting Command – Redstone Arsenal is issuing an open-ended Commercial Solutions Opening to continuously identify, assess, and onboard innovative commercial Group 3 Uncrewed Aircraft Systems onto the Drone Marketplace over a five-year period. Group 3 UAS are defined as aircraft weighing between 55 and 1,320 pounds, operating up to 18,000 feet and at speeds under 250 knots, designed for missions including reconnaissance, surveillance, target acquisition, electronic warfare, communications relay, and cargo delivery. This initiative moves away from traditional acquisition models to a market-driven approach that empowers Soldiers to select the most capable and suitable systems based on mission needs. The program seeks platforms that are production-ready or at least at Technology Readiness Level 7, with lower TRL systems considered if they demonstrate a viable path to maturity. No production contracts or guaranteed orders are awarded during onboarding; instead, vendors are entered into a competitive pool where individual end-users initiate orders based on operational requirements and funding availability. Offerors must meet strict eligibility requirements including full compliance with NDAA Section 848 to exclude Chinese-manufactured components, active SAM.gov registration, a valid CAGE code, a completed NIST SP 800-171 assessment, and adherence to cybersecurity standards including CMMC and DFARS 252.204-7012. Submission follows a three-step process beginning with an Initial Capability Assessment, followed by continuous verification activities to validate system claims, and culminating in a full proposal for a Firm-Fixed-Price Basic Ordering Agreement. Success requires passing an initial review, a live or virtual flight demonstration, an NDAA compliance audit that may involve government-led system tear-downs, and submission of fair and reasonable pricing validated against commercial benchmarks. Systems that meet all criteria are onboarded as either Provisional or Cleared based on supply chain verification and ultimately compete for orders on the marketplace, where selection is based on capability, price, and lead time. The government reserves the right to make multiple, single, or no awards, cancel the call at any time without reimbursement for proposal costs, and use alternate contracting vehicles beyond the BOA. All submissions must include a comprehensive analysis of any actual or potential organizational conflicts of interest, and offerors acknowledge that non-government advisors may review proprietary data under NDA restrictions.
W6QK Acc-Rsa

POSTED

about 8 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 336411
New
Federal
Call for Solutions (CFS): Drone Marketplace Onboarding of US Payloads, Software, Components, and Enablers/Accessories
Solicitation # W58RGZ-26-S-C001-0007
The U.S. Army Contracting Command – Redstone Arsenal is seeking innovative commercial unmanned systems payloads, software, components, and accessories through a Commercial Solutions Opening under solicitation W58RGZ-26-S-C001-0007, with a response deadline of August 3, 2031. This initiative aims to onboard cutting-edge technologies onto the UAS Marketplace to enhance tactical capabilities at the Brigade, Corps, and Division levels by enabling rapid reconfiguration of unmanned platforms. The focus is on mission-critical payloads such as Electro-Optical/Infrared cameras, LiDAR, Synthetic Aperture Radar, Laser Designators and Rangefinders, Signals Intelligence and Electronic Warfare modules, secure communications relays, and modular cargo delivery systems that can be easily swapped to meet evolving operational needs without altering the underlying aircraft platform. The solicitation is open to commercial providers seeking to integrate their solutions into a scalable, interoperable ecosystem tailored for military use, with an emphasis on modular, adaptable, and field-ready technologies. All submissions must align with the objectives outlined in the accompanying Statement of Objectives and Components document. The contract is administered by the Department of Defense through the Office of ACC-RSA in Redstone Arsenal, Alabama, with primary point of contact Latoya Pryor and secondary point of contact Vaylen Ware, both reachable via the designated email address. The NAICS code 336411 identifies the industry as Aircraft Manufacturing, and the solicitation is actively accessible through the SAM.gov portal for eligible vendors.
W6QK Acc-Rsa

POSTED

about 8 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 336411
New
Federal
HH-60W Degraded Visual Environment System(DVES) - FA8552-26-R-B001
Solicitation # FA8552-26-R-B001
The United States Air Force is seeking a system to mitigate the risks associated with Degraded Visual Environments (DVE) for the HH-60W Jolly Green II helicopter, requiring a comprehensive solution that detects hazards in real time during both enroute and terminal phases of flight. This system must function reliably across diverse challenging conditions such as smoke, smog, snow, nighttime sand or dust storms, and aircraft-induced brownout and whiteout scenarios, delivering clear, actionable data to cockpit and cabin displays to enhance situational awareness and safety. The effort encompasses the full lifecycle of the Degraded Visual Environment System (DVES), including design, development, testing, integration, procurement, installation, and deployment of the required hardware and software kits, along with all non-recurring engineering necessary to adapt the system to the HH-60W platform. The contract will be structured with a 24-month base period and the potential to activate up to five additional ordering periods, creating a maximum possible duration of eight years. The solicitation, identified as FA8552-26-R-B001, was posted on June 23, 2026, with proposals due by July 15, 2026. It falls under NAICS code 336411 for aircraft manufacturing and carries no set-aside designation, representing an open competition. The contract office is located at Robins Air Force Base in Georgia, with primary point of contact Theresa Younce and secondary contact Millie Danko available for inquiries. Performance is expected to support Air Force operations globally, with the system intended to significantly improve operational capability and crew safety under adverse visual conditions.
FA8552 Aflcmc Wiu

POSTED

about 8 hours ago

DEADLINE

in 2 months
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-863J
The contract solicitation SPE7L1-26-T-863J seeks the procurement of six gaskets with NSN 5330-00-614-8048, to be delivered to the U.S. Coast Guard Air Station Barber’s Point in Kapolei, HI, within 20 days of award. The item must comply with strict packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including use of a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, and adherence to special marking code 20 for “Do not bend.” The gasket must be free of asbestos as defined in FED-STD-313, and all hazardous materials must be labeled in accordance with 29 CFR 1910.1200, unless exempted under specified federal statutes. Barcoding per MIL-STD-129 is mandatory for all shipments, and palletization must follow DLA’s RP001 Packaging Requirements. Inspection and acceptance will occur at destination under FAR 52.246-2, with the government retaining authority to reject nonconforming items. The contract mandates compliance with multiple DFARS and FAR clauses, including cybersecurity requirements under NIST SP 800-171, prohibitions on hexavalent chromium and covered defense telecommunications equipment, and obligations related to trafficking in persons, employment eligibility, and whistleblower rights. Offerors must be registered in SAM with a valid UEI and CAGE code, and must declare their small business status and socioeconomic classifications if applicable. All proposals must be submitted electronically via DIBBS by August 6, 2026, and any award will require electronic invoicing through WAWF. The contract type is not explicitly stated but is presumed to be fixed-price, consistent with DLA’s simplified acquisition procedures. No pricing data is available in the solicitation, as unit cost and total value will be determined post-award.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 336411
New
DIBBS
GEAR, BEVEL
Solicitation # SPE7L4-26-T-5783
The contract pertains to the procurement of a bevel gear with NSN 3020-01-393-5320 and part number 50006-1, supplied by MORPAC INDUSTRIES, INC, under solicitation SPE7L4-26-T-5783. A total of 19 units are required at a unit price of $19.00, resulting in a total contract value of $361.00. Delivery is scheduled for 168 days after order placement, with a need ship date of January 19, 2027, and an original required delivery date of November 29, 2026. All items must be delivered FOB origin to DLA San Joaquin in Tracy, CA, and are subject to inspection and acceptance at the destination. The gear must comply with DLA’s technical and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, with any revisions in effect on the solicitation issue date controlling for this simplified acquisition. Mercury or mercury-containing compounds are strictly prohibited unless specifically exempted, such as in functional batteries, fluorescent lamps, sensors, controls, weapon systems, or naval chemical reagents, with exempted items requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods, materials, container types, and packaging codes, while marking must follow MIL-STD-129, including barcoding and special marking code 00-00 indicating no additional requirements. Palletization must meet DLA Packaging Requirements for Procurement RP001. The contract incorporates numerous Federal Acquisition Regulation clauses related to employment equity, trafficking in persons, hazardous material identification, sustainable products, electronic verification, and cybersecurity assessments per NIST SP 800-171, as well as transportation, subcontracting, safety notifications, and whistleblower rights. Compliance with hazard communication standards (29 CFR 1910.1200) is mandatory, and offerors must submit Safety Data Sheets and certify their size status and socioeconomic classification, including UEI and CAGE codes if applicable. All proposals must be submitted electronically via DIBBS by the August 6, 2026 deadline, and payment will be processed through Wide Area WorkFlow using DD Form 1
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A5-26-T-325X
The contract specifies the procurement of four liquid quantity transmitters under solicitation SPE4A5-26-T-325X, with a delivery deadline of 171 days after order. The item, identified by NSN 6680-01-666-8749, is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging, identification, and documentation must comply with specific DLA standards including RP001, RQ011, RQ017, and RC001, while sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposal procedures, and cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors. Technical data associated with the item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, with distribution restricted to contractors who hold US/Canada Joint Certification Program status, have completed mandatory DLA training, and received explicit approval. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact Hien-Van Trinh.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A5-26-T-323A
This contract is for the procurement of 951 units of a nut, sheet spring, identified as a commercial off-the-shelf item under part number 03A111-3-1 and its alternate variants including 13100009-1 and 132A11144-7-3, sourced from multiple approved suppliers such as Northrop Grumman Systems Corporation, Republic Fastener Mfg. Corp., GE Engine Services Distribution, LLC, STE MRAS, LLC, and The Monadnock Company. The item is classified as a critical application component and is not required to have unique item identification, in accordance with DFARS 252.211-7003(c)(1)(i). The National Stock Number is 5310-01-331-8030, with a unit price of $951.00, resulting in a total contract value based on the agreed quantity. Delivery is required within 171 days, with shipment to be made FOB origin under strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization per DLA’s RP001 packaging guidelines. The item is designated for delivery to the DLA Distribution Depot in Tinker AFB, Oklahoma, with no tolerance for quantity variance. The contract does not require special marking and mandates that all units be packaged and labeled in full compliance with federal packaging and transportation regulations. The procurement is part of a HUBZone Set-Aside solicitation, with the NAICS code 332722 indicating manufacturing of screw, nut, and bolt products. The ordering activity is the ASC Supplier Oper OEM Division under the Department of Defense, with the solicitation issued under reference SPE4A5-26-T-323A. The original required delivery date is August 16, 2027, with a need ship date of January 31, 2027, and the point of contact for logistics inquiries is Donetta Nelson. Transportation logistics follow DLA Procurement Notes C19 and C20, and all units must be delivered in accordance with the DoD-authorized unit of issue as defined in the official DLA documentation.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details