This Government Contract opportunity was posted on December 1, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

17--SWIVEL JOINT ASSY,A

Awarded

SPE7M215Q0073Federal

Submission Closed12/01/2014, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified marine contractor to perform a complete propulsion repower and helm system integration for a 30 foot Munson Packman landing craft. The project involves a six-phase process including the decommissioning and removal of two existing Honda BF250A outboard engines, a structural assessment of the transom, and the installation of two new Honda BF250D Drive-by-Wire outboards. Key technical requirements include the integration of dual-station Honda iST electronic control heads, updating the fuel system with USCG Type A1-15 lines, and interfacing the propulsion system with the existing NMEA 2000 backbone and SeaStar PA1315-2 Power Assist steering unit. The contractor must be an authorized Honda Marine Dealer or Service Center to ensure factory warranty coverage and must provide a secure facility for vessel storage. Final acceptance is contingent upon successful pre-flight diagnostics and a minimum two-hour sea trial to validate wide open throttle performance, steering responsiveness, and control handoff protocols. Proposals are due by November 13, 2026, and will be evaluated based on a 100-point scale considering technical capability and budget, with a preference for responsible Indian Offerors. Awarded contracts require either a 25 percent retainage or a performance bond, with a bond being mandatory for contracts exceeding 100,000 dollars. All payments are subject to the tribal appropriation process and the availability of funds in the tribal treasury.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

ASCB System and Vessel Inspection & MaintenanceThe ASCB System and Vessel Inspection and Maintenance subcontract involves providing routine sustainment, quarterly inspections, and minor repairs for prime contractors supporting Navy Region Mid-Atlantic projects. The scope of work includes maintaining barrier systems, cleaning A/C simplex strainers, lubricating hatch covers, and inspecting engine belts in accordance with manufacturer technical manuals. Additionally, the contractor is responsible for the towing and control of PSB strings during refurbishment processes. Managed under the Department of Defense via the Navsup Fleet Logistics Center Norfolk, this requirement demands high technical proficiency in marine diesel engines. The successful contractor must deliver functional systems and detailed quarterly inspection reports. The performance of these services is centered in the 23511 zip code area, with a response deadline set for November 16, 2026.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

HTFW PUMP Parts for STBD 1

Solicitation # N0040627Q0019

Naval Supply Systems Fleet Logistics Center Puget Sound, acting on behalf of Military Sealift Command, is soliciting the procurement of critical pump parts for the MIGUEL KEITH (ESB-5) under solicitation N0040627Q0019. The requirement consists of four ball bearings (PN 204-11-629), three mechanical seals (PN 231-31-1770), and two casing rings (PN 15489-16-27). This is a firm fixed price procurement being sole sourced to ECI Defense Group, the authorized distributor for the original equipment manufacturer, Buffalo Pumps dba Air and Liquid Systems Corporation. The parts are designated as critical safety items, and the use of non-qualified sources could void equipment warranties. The government will evaluate offers based on technical specifications, including the delivery date, past performance, and price. The contractor must adhere to strict packaging and marking standards, including MIL-STD 129R for external markings and ISPM 15 for wood crating. Additionally, the mechanical seals and casing rings require DoD unique identification per DFARS 252.211-7003. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. The procurement is categorized under NAICS code 336611, with an anticipated award date in November 2026.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

TSV4 NARR MESSING AND MODERNIZATION

Solicitation # N0018927QL008

NAVSUP FLT LOG CTR Norfolk is soliciting a firm-fixed-price contract for the development of a drawing package and Bill of Materials (BOM) to support habitability upgrades for the TSV4 Narragansett. The scope of work focuses on the vessel's messing, berthing, stateroom, and sanitary spaces at Joint Expeditionary Base Little Creek-Fort Story in Virginia Beach, Virginia. This effort is strictly limited to assessment and documentation; it specifically excludes any procurement, fabrication, removal, or installation of shipboard components. The project is a total set-aside for small businesses, including service-disabled veteran-owned small businesses, under NAICS code 336611. Key deliverables include a draft drawing package and BOM due 40 calendar days after award, with the final delivery of two electronic files and two full-size paper copies in NAVSEA format due within 61 calendar days. Contractors must adhere to several technical standards, including MIL-STD-2003 for electric plants, MIL-STD-777 for piping, and General Specifications for Overhaul of Surface Ships. A mandatory ship check at Colonna's Shipyard in Norfolk is required for eligibility, and failure to attend will result in disqualification. Award will be based on the best value, evaluating the mandatory ship check on a pass/fail basis and the technical approach on an acceptable/unacceptable basis, with the final selection going to the lowest total evaluated price.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

Inspect and Clean Sections of Forward Ventilation System onboard Virginia Class Submarine.

Solicitation # N6278927Q0003

The Department of Defense, through the Supply Of Shipbuilding Groton office in Connecticut, is soliciting a combined contract under solicitation number N6278927Q0003 for the inspection and cleaning of sections of the forward ventilation system onboard a Virginia Class Submarine. This requirement falls under NAICS code 336611. The solicitation was posted on November 4, 2026, with a response deadline of November 13, 2026. Primary and secondary points of contact for this effort are Stephanie Neale and Andrea Cook. Special contract requirements include specific labor and pay mandates. A 4 percent hazard pay differential is applicable for employees in positions representing a low degree of hazard when working near ordnance, explosives, or incendiary materials. Contractors must provide required uniforms at no cost to employees or reimburse them for the actual cost. Additionally, in accordance with Executive Order 13706, employees subject to the Service Contract Act must receive one hour of paid sick leave for every three hours worked, capped at 56 hours per year. Labor classifications for employees not listed in the wage determination must be designated as either Classification A or B based on their responsibility for their own safety.

Supply Of Shipbuilding Groton

POSTED

DEADLINE

Multi Mission Surface Combatant (MMSC) Post Delivery Execution Yard (PDEY)

Solicitation # N6117727R0003

Solicitation N61177-27-R-0003 is for the Multi Mission Surface Combatant (MMSC) Post Delivery Execution Yard (PDEY) contract, managed by Navsea HQ. The objective is to execute post-delivery availabilities for four MMSC ships, with each vessel undergoing a 14-month post-delivery period. The scope of work includes the management and execution of three primary availabilities per ship: the Post Shakedown Availability (PSA), the Industrial Post Delivery Availability (IPDA), and the Continuous Maintenance Availability (CMAV), as well as any concurrent Planned Maintenance Availabilities (PMAVs). Key contractor responsibilities include providing a NAVSEA-certified drydock for PSAs, performing emergent work, and conducting Post Repair Trials (PRT) to ensure system operability. The contract is structured using Cost Plus Award Fee (CPAF) task orders, with a total performance period not to exceed five years. Work for PSAs and IPDAs will be performed at the contractor's facilities, while CMAVs will be executed at Naval Station Mayport. Award evaluation is based on non-cost factors including management capability, facility and production capabilities, and the proposed approach for PSA, IPDA, and CMAV execution. Performance will be measured against weighted objectives for schedule (35%), management (30%), technical (20%), and cost (30%) performance. The solicitation requires strict adherence to quality standards such as ISO 9001:2015 and specific military marking and packaging standards including MIL-STD-130 and MIL-STD-129.

POSTED

DEADLINE

WXPAK, ASSY W/HARDWIRE SENSOR

Solicitation # 70ZU0227Q49002B00

The U.S. Coast Guard intends to award a sole source, fixed-price contract to Campbell Scientific Inc. for 19 WXPAK assemblies with hardwire sensors, identified by NSN 6660-01-470-7062 and part number S1568. This procurement is conducted under FAR 13.106-1(b) because the vendor is the original equipment manufacturer and possesses the proprietary technical expertise required to ensure compatibility and performance. The quote is due by November 17, 2026, with a required delivery date of December 14, 2026. The procurement is categorized under NAICS 336611 and is designated as a total small business set-aside. The contract requires each assembly to be tested and calibrated using factory procedures, with results enclosed in the shipment. Packaging must adhere to ASTM-D5118 standards, utilizing individual cardboard boxes with foam inserts and preservation for a minimum of two years. Marking and bar-coding must comply with ISO/IEC-16388-2007 using Code 39 Symbology. Inspection and acceptance will occur at the destination, where a Coast Guard representative will verify the order's completeness, the absence of transit damage, and adherence to all packaging and marking specifications.

POSTED

DEADLINE

Solicitation # 70ZU0227QIBCT0001

Solicitation 70ZU0227QIBCT0001 is an Indefinite Delivery Requirement Contract (IDR) for the FY27 drydock availability of the USCGC KUKUI (WLB 203), a 225-foot Buoy Tender homeported in Sitka, Alaska. The project involves comprehensive drydock repairs, including extensive preservation of the hull, exterior decks, superstructure, ballast and potable water tanks, and various internal mechanical components. Performance will take place at the contractor's facility from February 2, 2027, to May 18, 2027, with an anticipated award date of January 18, 2027. This requirement is a total small business set-aside under NAICS code 336611, with a size standard of 1,300 employees. The award will be granted to the responsible quoter providing the most advantageous quote, based on a lowest-price technically acceptable basis. Evaluation factors include a pass/fail assessment of technical capability and past performance within the last three years. Contractors must provide a comprehensive execution plan for lodging and messing, facility certifications, and docking calculations in accordance with SFLC Standard Specifications 0740 and 8634. Quotes must be submitted via email by November 23, 2026, and must include a detailed technical proposal separate from the pricing sheet. Order limitations are set with a minimum order of 1,000 dollars and a maximum combination order of 7 million dollars.

POSTED

DEADLINE

Solicitation # N6449827Q5002

The Department of Defense, specifically the NSWC Philadelphia Division, has issued solicitation N6449827Q5002 for a project titled Big Blue Machalts. This procurement falls under NAICS code 336611 and is being managed out of the agency's office located in Philadelphia, Pennsylvania. Interested parties must submit their responses by the deadline of November 19, 2026. For further inquiries or detailed information regarding the requirements, the primary point of contact is Anthony Ricciardi.

Nswc Philadelphia Division

POSTED

DEADLINE

DRYDOCK: USCGC WILLIAM CHADWICK DD FY2027

Solicitation # 70ZU0127PBPLWCHADWICK

The U.S. Coast Guard Surface Forces Logistics Center is issuing a Sources Sought Notice under solicitation number 70ZU0127PBPLWCHADWICK to conduct market research for the drydock repairs of the USCGC WILLIAM CHADWICK (WPC-1150). This is not a formal solicitation, but a request for information to identify capable sources under NAICS code 336611 for ship building and repairing. The anticipated period of performance is 119 calendar days, scheduled to run from June 8, 2027, to October 5, 2027. All work is to be performed at the contractor's facility, and there are no geographical restrictions for the cutter. The scope of work encompasses 25 specific items, including hull plating inspection, propulsion shafting and rudder assembly repair, tank preservation, electrical power distribution thermographic inspection, and sea trial support. Interested companies, including various small business socioeconomic categories, must submit their company identification, business size certification, past performance evidence, and a statement of intent to bid as a prime contractor. Responses must be submitted via email to the designated points of contact by November 17, 2026, at 11:00 am EST.

POSTED

DEADLINE

Solicitation # 70ZU0327Q50203B00

The Department of Homeland Security, acting through the United States Coast Guard agency CG-SEA-C23, is soliciting quotes for a brand name award to purchase seventy-five steerer joysticks, part number HM1973 and national stock number 2030-01-468-5974, for use on 47 foot MLB vessels. This procurement is designated as a total small business set aside under NAICS code 336611. The agency has determined that only this specific brand name will satisfy its requirements, in accordance with FAR 13.106-1(b). The solicitation, numbered 70ZU0327Q50203B00, was posted on November 4, 2026, with a response deadline of November 18, 2026. Performance is to take place in Curtis Bay, Maryland, and the contracting office is located in Norfolk, Virginia. Primary contact for this requirement is Erica Perry, with Bryan Duffey serving as the secondary contact. This announcement serves as the sole solicitation, and no separate written solicitation will be issued.

POSTED

DEADLINE

U.S. NAVY VESSEL - CASREPS - AC AND REEFER PLANT REPAIR

Solicitation # N6817127QN009

Solicitation N6817127QN009, issued by the Navsup Flc Sigonella Naples Office for the U.S. Navy, seeks a qualified Carrier system service provider to perform troubleshooting, diagnosis, and repair of a vessel's air conditioning and refrigeration plant. The scope of work includes restoring the A/C system to operational status, testing system components, and procuring necessary parts for the refrigeration plant. Performance will take place in Malaga, Spain, with a period of performance from November 16, 2026, through November 20, 2026. The work is governed by specific NAVSEA drawings and technical manuals, and the contractor must provide proof of ISO 9001 or 14001 certification for marine maintenance and repair services. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) basis, where technical capability is rated as either acceptable or unacceptable. Qualified offerors must submit their quotes and technical documentation via email by November 9, 2026. The contract requires adherence to strict safety standards, particularly regarding high voltage electrical systems, and mandates electronic invoicing through Wide Area WorkFlow (WAWF). This is not a small business set-aside, and the contractor must comply with various FAR and DFARS clauses, including those related to hazardous materials labeling and vessel access.

Navsup Flc Sigonella Naples Office

POSTED

about 10 hours ago

DEADLINE

in 4 days

AI Contract Overview

This procurement solicitation, identified by number SPE7M215Q0073, is for the acquisition of Swivel Joint Assembly A, designated by NSN 1710015175705. The contract is categorized under NAICS code 336611 and is open to all responsible sources for electronic quote submission. The requirement is divided into ten separate line items, all to be delivered to DLA Distribution W1BG. Line 0001 requires the largest quantity with 28 units due within 460 days after the order. Line 0002 requires one unit due within 200 days, while lines 0003 through 0010 each require one unit due within 460 days.

General Info

Agency

N/A

Contract Value

$102,400

NAICS

336611 - Ship Building and Repairing

Place of Performance

NY, USA

Set-Aside

NONE

Awardee

GNY EQUIPMENT, INC.

Award Issued Date

12/01/2014, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedOct 16

Combined Synopsis

AwardedDec 1

Contract was awarded

Submission Closed

12/01/2014, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

ContactsNo contacts available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

ContactsNo contact information available

Full Description

Proposed procurement for NSN 1710015175705 SWIVEL JOINT ASSY,A: Line 0001 Qty 28.00 UI EA Deliver To: W1BG DLA DISTRIBUTION By: 0460 DAYS ADOLine 0002 Qty 1.000 UI EA Deliver To: W1BG DLA DISTRIBUTION By: 0200 DAYS ADOLine 0003 Qty 1.000 UI EA Deliver To: W1BG DLA DISTRIBUTION By: 0460 DAYS ADOLine 0004 Qty 1.000 UI EA Deliver To: W1BG DLA DISTRIBUTION By: 0460 DAYS ADOLine 0005 Qty 1.000 UI EA Deliver To: W1BG DLA DISTRIBUTION By: 0460 DAYS ADOLine 0006 Qty 1.000 UI EA Deliver To: W1BG DLA DISTRIBUTION By: 0460 DAYS ADOLine 0007 Qty 1.000 UI EA Deliver To: W1BG DLA DISTRIBUTION By: 0460 DAYS ADOLine 0008 Qty 1.000 UI EA Deliver To: W1BG DLA DISTRIBUTION By: 0460 DAYS ADOLine 0009 Qty 1.000 UI EA Deliver To: W1BG DLA DISTRIBUTION By: 0460 DAYS ADOLine 0010 Qty 1.000 UI EA Deliver To: W1BG DLA DISTRIBUTION By: 0460 DAYS ADOAll responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.