This Government Contract opportunity from Department Of Defense was posted on September 12, 2012. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

19--Fabricate, Deliver, & Install Floating Docks at Dale Hollow Lake, Lillydale Recreation Area

Awarded

W912P5-12-T-0061Federal

Submission Closed09/12/2012, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312

New

ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)

Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf

Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This project falls under NAICS code 332312 and requires that the selected offeror be fully bonded and insured to perform the work. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The primary point of contact for this solicitation is Thomas Sheehan.

POSTED

DEADLINE

Marine-Grade Material SupplyThis subcontract for the Town of Plymouth in Massachusetts involves the supply of marine-grade construction materials for wharf projects. The scope of work includes sourcing and delivering treated marine pilings, steel beams, and pre-cast concrete elements to prime contractors. A critical requirement is the provision of materials specifically treated for saltwater environments, such as CCA treatment for wood, and the use of heavy-haul trucking for all deliveries. To ensure quality and safety, the contractor must provide material certifications verifying saltwater corrosion resistance and strict environmental compliance for all treated wood products. The project is located on Court Street in Plymouth, with a response deadline set for November 19, 2026.

POSTED

DEADLINE

Dump Bed and Tarping System InstallationThis subcontract involves the fabrication and installation of 10-foot dump beds and tarping systems for prime contractors working on Massachusetts Operational Services Division vehicle projects. The scope of work includes mounting truck boxes below the dump beds and ensuring all installations are fully operational and compliant with 540 CMR upfit standards. The project is based in Westborough, Massachusetts, with a response deadline of November 9, 2026. Classified under NAICS code 332312, the contract requires the delivery of complete, ready-to-use dump bed systems as specified by the agency requirements.

Operational Services Division

POSTED

DEADLINE

Salt Brine Production System Fabrication

POSTED

DEADLINE

Junction Box Housing FabricationThis subcontract involves the fabrication of physical enclosure housings for prime contractors supporting DLA supply contracts for NSN 5975-01-574-9790. The scope of work includes cutting, bending, welding, and machining of box housings using industrial sheet metal fabrication equipment and CNC machining to ensure structural integrity and dimensional accuracy. All work must be performed in accordance with the provided technical data package and the DLA Master List of Technical and Quality Requirements, with the final delivery consisting of unfinished metal housings. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the project falls under NAICS code 332312. Performance of the contract is located in Mechanicsburg, Pennsylvania. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Metal Tube Assembly ManufacturerThis subcontract involves the fabrication and supply of a single packaged and marked Metal Tube Assembly for prime contractors supporting Department of Defense DLA supply contracts. The manufacturer must adhere to traditional metal fabrication standards as specified by NSN 4710016709559 and the DLA Master List of Technical and Quality Requirements. Strict prohibitions are in place against the use of additive manufacturing, hexavalent chromium, and ozone-depleting chemicals during the production process. To be eligible, the provider must maintain CMMC Level 2 and NIST SP 800-171 compliance. The opportunity is categorized under NAICS code 332312 and was posted by the Active Devices Division. Interested parties must submit their responses by November 3, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Fabrication of Shipping and Storage Container Cover and Access Panel AssemblyThis subcontract involves the fabrication of shipping and storage container cover and access panel assemblies for prime contractors supporting DLA Troop Support projects. The scope of work requires the manufacture of two units of NSN 8145016004820 using non-additive manufacturing processes in strict accordance with provided technical drawings. The contractor is responsible for delivering comprehensive documentation, including material and process certifications, process operations, and inspection method sheets. Compliance with DLA Packaging Requirements RP001 and MIL-STD 129 for marking and labeling is mandatory. The project is managed under the Department of Defense through Construction and Equipment Containers, with the place of performance located in New Cumberland, Pennsylvania. The contract falls under NAICS code 332312.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Supply of Critical Application Leaf SpringsThis subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines, involves the supply of two certified specialized leaf springs, part number 0EYA6. These components must meet strict Critical Application Item safety and performance standards and be packaged in accordance with RP001 DLA Packaging Requirements for Procurement. The contract is designated as a Total Small Business Set-Aside under NAICS code 332312. The performance of this contract will take place in Phoenix, Arizona. Interested parties must have responded by the deadline of November 9, 2026, following the posting date of October 29, 2026. The primary objective is to provide these critical components to prime contractors responsible for fulfilling DLA supply contracts.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Vehicle Support Stand SupplierThis subcontract opportunity is for a supplier to provide vehicle support stands to prime contractors supporting the Defense Logistics Agency Weapons Support Land Supplier Operations. The selected provider will be responsible for manufacturing or sourcing stands that strictly adhere to NSN 4910-01-708-1466 and the DLA Master List of Technical and Quality Requirements RA001, utilizing specialized metal fabrication capabilities to ensure all military specifications are met. The contract is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 332312. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 9, 2026, to provide the completed physical vehicle support stands as required by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Straight Tube-to-Hose AdaptersThis subcontract involves the manufacture or procurement of 10 straight tube-to-hose adapters, specifically part number 7018873096, for prime contractors serving the Department of Defense DLA Weapons Support Fluid Handling Division. The supplier must ensure all components are produced in accordance with the DLA Master List of Technical and Quality Requirements and certify that materials are free of Class I ozone depleting chemicals. Strict adherence to industry standards is required, including ASTM D3951 and RP001 for packaging and MIL-STD-129 for marking. The opportunity falls under NAICS code 332312, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Marine Structural Metal Door SupplierThis subcontract opportunity is for a supplier to manufacture and deliver two specialized marine structural metal doors meeting NSN 2040005546932 for the DLA Weapons Support Fluid Handling Division. The selected contractor must utilize marine-grade structural metal and possess the necessary marine fabrication equipment to complete the order. Compliance with MIL-STD-129 for shipment marking and Federal Standard No. 313 for hazardous materials handling is strictly required. The contract is designated as a Total Small Business Set-Aside under NAICS code 332312, and applicants must maintain an active SAM registration. Interested parties must submit their responses by November 9, 2026. Performance of the contract will take place in FPO 96662.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Container Support Plates (NSN 8145-00-172-9217)This subcontract involves the fabrication and supply of container support plates under NSN 8145-00-172-9217 for prime contractors supporting DLA Troop Support projects. The selected provider must manufacture or source these plates using steel or heavy-duty alloys, ensuring all units meet OEM quality assurance standards and adhere to RP001 DLA Packaging Requirements for Procurement. A valid CAGE code is mandatory for participation, and the contractor is responsible for delivering physical units ready for government-arranged transportation. Managed by Construction and Equipment Containers for the Department of Defense under NAICS code 332312, the contract was posted on October 29, 2026, with a response deadline of November 5, 2026. Performance will take place in the 95304-5000 zip code area.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 11 hours ago

DEADLINE

in 7 days

AI Contract Overview

This contract requires the fabrication, delivery, and installation of two 80-foot aluminum gangways and two 12x30-foot aluminum courtesy floats at the Lillydale Recreation Area in Allons, Tennessee. The gangways must feature marine-grade aluminum, slip-resistant walking surfaces, and specific guardrail and mounting specifications to withstand wind and drift. The courtesy floats must be constructed from marine-grade aluminum with interlocking runners, rubber protective edging, and eight cleats per float, ensuring all flotation devices meet Corps of Engineers lake requirements. The project must be completed by November 30, 2012, with deliveries restricted to weekday daylight hours. The selected contractor is required to be registered in the Central Contractor Registration and provide a DUNS number. All materials and construction must meet or exceed the standards set forth in publication EM 1110-1-400.

General Info

Agency

Department Of Defense → W072 Endist Nashville

Contract Value

$69,497

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

TN, USA

Set-Aside

NONE

Awardee

ALL AMERICAN CONSTRUCTION AND CONTRACTING, INC.

Award Issued Date

09/12/2012, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedAug 20

Presolicitation

Type ChangedAug 23

Presolicitation → Solicitation

AwardedSep 12

Contract was awarded

Submission Closed

09/12/2012, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W072 Endist Nashville

ContactsNo contacts available

OfficeNASHVILLE, TN, 37203-1070, USA

Organization / AgencyDepartment Of Defense → W072 Endist Nashville

Office AddressNASHVILLE, TN, 37203-1070, USA

ContactsNo contact information available

Full Description

PURCHASE REQUEST FOR COURTESY FLOATS AND GANGWAYS LILLYDALE, DALE HOLLOW PROJECT 1. Scope of Work The Contractor shall furnish, deliver, and install two (2) courtesy floats and two (2) gangways to the Lillydale Recreation Area, 985 Lillydale Road, Allons, TN 38541. 2. Courtesy Floats and Gangways Specifications: Each gangway shall 80 feet in length, four feet wide inner diameter, with aluminum guardrails to include a top rail and an intermediate rail. The top rail will be between 36"- 42" from the walking surface. The guardrails shall be designed for a 250# concentrated load applied from any direction at any point. The walking surface will be constructed of aluminum runners with a slip resistant surface. The walkways shall be designed with a minimum live load of 50 pounds per square foot. The aluminum shall be of marine grade. The walkway structure shall consist of aluminum members connected by welding rather than bolted sections. The walkway will be designed to withstand loading from wind and drift that may accumulate around the structure. The mounting monolith shall be provided with apparatus to accommodate the gangway. The gangway shoreline mount shall be centered with two "ears" and spacing. Ear # 1 shall be 1.5" wide, 42" space then ear # 2 also 1.5" wide. The opposite end shall have the reverse attachment method of a centered " ear, 2" ID space, " ear, 41.5" space " ear, 2" ID space, " ear. All ears shall have a 1" hole center bored. Floatation devices shall be placed to each side of the gangway to stabilize the sway and shall be of adequate size to remove all vertical weight from the courtesy float. Each courtesy float shall measure 12'x 30' and shall be constructed of all aluminum material. The deck joists shall be constructed of 8" marine grade aluminum C-channel placed on two foot centers. These members shall be connected by factory welds with bracing at all corners. The decking shall be all interlocking aluminum runners with a slip resistant surface. These deck panels shall be attached with self tapping screws furnished by the manufacturer. The hinge on the float shall be compatible with the existing walkway. The flotation shall meet all applicable requirements for use on Corps of Engineers lakes. The floats shall be constructed to match or be similar in design to the attached gangways and provide 8 cleats per float. The edges of each float shall have a border along the top edge constructed of rubber as to protect boats that tie to the structure. The scope of work is to provide all necessary components and to install the new courtesy float to the new gangway at each location. The Contractor shall deliver products in the following quantities and dimensions: 80' Aluminum Gangway 2 EACH 12'x30' Courtesy Floats 2 EACH Assembly & Installation 2 EACH 3. Reference Publications: The gangways and courtesy floats shall meet or exceed the standards as set forth on EM 1110-1-400. 4. The Contractor shall furnish product on or before 30 November 2012. The Contractor shall be required to be registered in the Central Contractor's registration (CCR). The Contractor shall provide a DUNS number (Data Universal Numbering System). The delivery shall be limited to Monday through Friday during daylight hours unless prior approval has been obtained from the Resource Manager.

More opportunities from Department Of Defense → W072 Endist Nashville

Same awarding agency

19--Fabricate, Deliver, & Install Floating Docks at Dale Hollow Lake, Lillydale Recreation Area

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

No documents available

AI Contract Breakdown

No documents to break down

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Department Of Defense → W072 Endist Nashville

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open