Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

20--Annual synopsis of repair Basic Ordering Agreement N0010412GA100 for repair of electron tubes by Communications and Power Industries - Microwave Power Products Division, Palo Alto, CA (CAGE 99313)

Active
N0010412GA100YR3Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The NAVSUP Weapon System Support (NAVSUP WSS) is preparing to place FY2015 orders under Basic Ordering Agreement (BOA) N00104-12-G-A100 for the repair of various electron tubes. Communications and Power Industries - Microwave Power Products Division (CPI-MPPD), identified as the original equipment manufacturer (OEM) with CAGE code 99313, is the sole source with full repair capability. The Government does not possess complete data or drawings necessary to support repair by other contractors, making CPI-MPPD the only approved repair provider. A key item under this BOA is the Electron Tube, NSN 5960-01-373-5313, with an estimated quantity of five units annually. Because these items are critical and technical data has not been determined adequate for open competition repair, all must receive Government source approval prior to contract award. Requests for new source approval generally take longer than the lead time allowed to meet the Government’s needs, so awards will primarily continue with the previously approved source to ensure Fleet readiness. This contract is being issued by the Department of Defense, Navsup Weapon Systems Support in Mechanicsburg, PA, for NAICS code 334412, reflecting electronic instrument and component manufacturing. Inquiries about the items to be repaired or related questions are directed to the contact, Nick Stellhorn. This solicitation underscores the critical nature of maintaining these electron tubes for operational readiness, emphasizing source control due to limited technical data and the necessity for timely repair support.

General Info

NAVSUP WSS awards sole-source FY2015 electron tube repairs to OEM CPI-MPPD for Fleet readiness.

NAICS

334412 - Bare Printed Circuit Board Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
ContactsNo contacts available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Office AddressMECHANICSBURG, PA, 17050-0788, USA
ContactsNo contact information available

Full Description

Show more
This is the NAVSUP Weapon System Support (NAVSUP WSS) synopsis for FY2015 orders to be placed under Basic Ordering Agreement (BOA) N00104-12-G-A100 for the repair of various electron tubes. CPI-MPPD (CAGE 99313) is the original equipment manufacturer and the only known source to possess full repair capability. Complete data, drawings, and the rights to the same are not available from the Government. The top dollar value item on this BOA is the Electron Tube, NSN 7HH 5960-01-373-5313, five (5) per year. For a complete list of all items to be repaired or any questions concerning this notice contact Nick Stellhorn +1 (555) 000-0000. All items on the BOA require Government source approval prior to contract award, since the items are critical and/or the technical data available has not been determined adequate to support repair via full and open competition. Only the source previously approved by the Government for repair of these motors has been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. Please note, if evaluation of a source approval request submitted hereunder cannot be processed in time and/or approval requirements preclude the ability to obtain these motors in time to meet Government requirements, award of the subject requirement may continue based on Fleet support needs.

Similar Contracts

Same NAICS industry code

NAICS: 334412
New
DIBBS
EXTRACTOR, ELECTRICAL C
Solicitation # SPE7M1-27-T-1919
Solicitation SPE7M1-27-T-1919, issued by the Defense Logistics Agency (DLA) Weapons Support Maritime Supply Chain, is for the procurement of 20 units of Electrical Card Extractors (NSN 5998-01-457-6564). The items are designated as critical application items and must be manufactured in accordance with Technical Data Package (TDP) Rev B Gen 4 and basic drawing 53711 6962950 Revision F. The required delivery date is April 15, 2027, with a need ship date of April 20, 2027, and a delivery timeline of 154 days after receipt of order. Delivery is FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and safety standards, including the DLA Master List of Technical and Quality Requirements and a manufacturer's inspection system complying with SAE AS9003 or ISO 9001. Packaging must follow MIL-STD-2073-1E and marking must comply with MIL-STD-129. Special material restrictions are in place, specifically prohibiting the intentional addition of mercury or mercury-containing compounds. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF) and compliance with the Buy American and Balance of Payments Program (DFARS 252.225-7001). Additionally, the solicitation prohibits the use of additive manufacturing processes for the supplied parts.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334412
New
DIBBS
METER
Solicitation # SPE7M1-27-T-1873
Solicitation SPE7M1-27-T-1873 is a small business set-aside request for quotation issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one meter, NSN 6625012037942. The requirement specifies a delivery timeline of 20 days after order, with an original required delivery date of October 8, 2026. Delivery is destined for the US Army Prime Power School at Fort Leonard Wood, Missouri, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional uses per NAVSEA 5100-003D. Packaging must comply with ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with all shipments marked and labeled according to MIL-STD-129 and palletized per RP001. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, emphasizing compliance with the Buy American Act, the Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. Offerors must be registered in the System for Award Management and submit quotes based on FOB Origin.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 326220
New
Federal
HOSE, NONMETALLIC
Solicitation # N00104-27-Q-BC18
Solicitation N00104-27-Q-BC18 is a fixed-price request for the procurement of nonmetallic hoses, identified by NSN 4720-01-437-1073. Issued by the Department of Defense through the Navsup Weapon Systems Support Mech office in Mechanicsburg, Pennsylvania, this opportunity is a total small business set-aside under NAICS code 326220. The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference applied to HUBZone small business concerns and other successful small business concerns. The government will utilize the Supplier Performance Risk System to assess item, price, and supplier risk. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073 and MIL-STD-129, with specific requirements for DLR labels and OCONUS shipments. Inspection and acceptance will occur at the origin. Contractors must provide Safety Data Sheets and GHS compliant labels for any hazardous materials. Deliveries are on an FOB Destination basis with transportation costs prepaid. Administrative processing and payments will be managed through the Wide Area WorkFlow system. Offerors must maintain active SAM registration and submit a completed Standard Form 33, Section B Schedule of Supplies, and Section K representations to be considered for award.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details
NAICS: 335311
New
Federal
61-Wiring Harness
Solicitation # N0010427QNA45
Solicitation N00104-27-Q-NA45 is a fixed-price contract for the manufacture of one Weapon Control Cable wiring harness, identified as NSN 6150-01-469-1539. The item is designated as a non-aviation critical safety item, meaning failure could result in serious equipment damage or personnel injury. Production must adhere to design and performance requirements specified in NAVSEA drawing 6557906 and cage 53711. The contractor must be PRO-20 certified and obtain 53711 Naval Engineering approval to qualify as a source. A strict mercury-free requirement is in place for all materials to prevent corrosion and toxicity in submarine and surface ship environments. The contract mandates a non-destructive First Article Test and inspection of the cable unit per NAVSEA drawings 6557906 and 6557920, with approval required from NUWCDIVNPT Code 4124 before production begins. Quality standards are governed by ISO 9001, and the contractor is responsible for all inspections at the origin. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1, with specific requirements for DLR labels and palletization. Delivery is set for 365 days, FOB Destination. Award will be based on the most advantageous offer, with past performance weighted more heavily than price. Invoicing and payment must be processed through the Wide Area Workflow system.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332722
New
Federal
53--SCREW,MACHINE
Solicitation # N0010426QYAHV
Solicitation N00104-26-Q-YAHV is a total small business set-aside request for quotations issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of machine screws, specifically flat head screws for use on Navy submarines. This fixed-price EAF spares requirement includes a base quantity of 36 units of part W25G1U and 35 units of part W62G2T, with a government option to increase the quantity by up to 100 percent within 365 days of award. The government will award the contract to a responsible offeror based on best value, prioritizing past performance over price. The technical requirements mandate that screws meet the specifications of Drawing 4491149 and MIL-DTL-18240, including the use of a qualified products list for the Nylok self-locking element. Strict quality assurance is required, including a mercury-free certification, 100 percent visual and dimensional inspection, and the submission of a Quality Inspection and Test Plan for government approval. Deliverables must be processed through the Wide Area Workflow system, and final acceptance is conducted at the origin by the cognizant DCMA in coordination with the Naval Surface Warfare Center Philadelphia Division. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific marking requirements provided by the Carderock Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 2 months
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS