Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

20--RING,CRANK PIN

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This predicted recompete opportunity involves the procurement of crank pin rings for the Department of Defense, specifically managed by DLA Land and Maritime. The current contract, SPE7M026V0673, is held by ASRC Federal Facilities Logistics, LLC with a total value of 277,045.10 dollars. The existing agreement is a firm fixed price contract that was competed under SAP and is projected to end on September 8, 2026. The opportunity is classified as likely for recompete with a medium confidence level of 65 percent. This requirement falls under NAICS code 336415 and is being coordinated through the office located in Columbus, Ohio. The primary point of contact for this pre-forecast notice is Natalya Radyk.

General Info

DLA Land and Maritime predicted recompete for DoD crank pin rings under NAICS 336415.

Agency

Department Of Defense → DLA Land And Maritime

NAICS

336415 - Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

Place of Performance

OH, 070043561, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMar 8

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Natalya Radyk

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: SPE7M026V0673 Incumbent: ASRC FEDERAL FACILITIES LOGISTICS, LLC Contract Value: $277,045.1 Potential End Date: 2026-09-08T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 65/100)
https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=31e84b8e1fb64b11983160388d389524

Similar Contracts

Same NAICS industry code

TUMBLER ASSEMBLY

Solicitation # SPE4A6-27-T-7441

Solicitation SPE4A6-27-T-7441 is a federal procurement issued by the Defense Logistics Agency (DLA) Weapons Support ASC Commodities Division for the supply of 75 Tumbler Assemblies (NSN 1440-01-725-5238). The items must be manufactured in accordance with Reference Drawings 98747 201717861 and 98747 201824601, both Revision A. The contract specifies a delivery timeline of 369 days after order, with FOB and inspection/acceptance points set at the origin. A critical requirement includes the delivery of one unit for First Article Testing (FAT) within 90 calendar days of the contract date to Hill AFB, Utah. The government will add a testing cost of 1,774.00 dollars to the offered price during the evaluation process. The procurement is designated as a Total Small Business Set-Aside under NAICS code 336415. Quality standards require the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, with sampling conducted per MIL-STD-1916 or ASQ H1331. Due to the nature of the technical data, the contract is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the contract mandates compliance with CMMC Level 2 cybersecurity standards and DFARS 252.204-7012 for safeguarding covered defense information. Packaging must adhere to MIL-STD-129 and DLA Master List requirements, with specific standards for hazardous materials under TQ requirement IP025.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-7439

Solicitation SPE4A6-27-T-7439 is a federal procurement issued by the Defense Logistics Agency (DLA) Weapons Support ASC Commodities Division for the supply of two SARC units (NSN 1440-01-657-9543). The requirement includes a First Article Test (FAT) and specifies a delivery timeline of 362 days after the order. While the metadata indicates a total small business set-aside, the solicitation text explicitly states it is not a small business set-aside. The procurement is governed by FOB Origin terms, and the government will not evaluate offers utilizing additive manufacturing. The contract mandates strict adherence to quality and identification standards, requiring ISO 9001:2015 certification for manufacturers and compliance with MIL-STD-130 for Item Unique Identification (IUID). Packaging and marking must follow MIL-STD-129 and DLA's RP001 requirements. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program (JCP) certification. Inspection and acceptance will occur at the origin. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF) and compliance with CMMC Level 2 cybersecurity standards.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

ACTUATOR,ELECTRO-ME

Solicitation # N0010426QXA48

Solicitation N0010426QXA48 is a request for quotation issued by the Navsup Weapon Systems Support Mech for the manufacture and procurement of the Actuator, Electro-Me, identified by NIIN 014850123. The requirement specifies that the item must conform to the design represented by Cage Codes 53711 or 38597, reference number 7104048-19, and utilize Technical Data Package version 008. The government will award a firm-fixed-price contract to a responsible offeror based on best value, evaluating price, past performance, and supplier performance risk. Only authorized sources or distributors providing official OEM authorization will be considered for award. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and MIL-STD-2073 for preservation. All shipments must be processed via the Wide Area Workflow system for payment and receiving reports. Key delivery requirements include a 30-day lead time and compliance with specific packing levels for CONUS and OCONUS shipments. The offer due date has been extended to November 27, 2026, and submissions must be sent electronically to the primary point of contact, Darian M. Holley. Additional requirements include compliance with DFARS cybersecurity standards and the provision of material safety data sheets for any hazardous materials delivered.

Navsup Weapon Systems Support Mech

POSTED

about 16 hours ago

DEADLINE

Guided Missile Component Protective Cover ManufacturerThis subcontract involves the manufacture and supply of nine protective covers for missile components to support prime contractors on Defense Logistics Agency projects. The selected provider will utilize additive manufacturing equipment and materials to fabricate covers that meet the specific requirements for NSN 1420-01-614-4164. All production must strictly adhere to L31 additive manufacturing standards and Department of Defense quality assurance requirements. The project is managed by the DLA Weapons Support ASC Commodities Division under the Department of Defense, with performance taking place in New Cumberland. The contract falls under NAICS code 336415, and interested parties must have responded by the deadline of November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

SNUBBER GUIDE ASSY

Solicitation # SPE4A6-27-T-5001

Solicitation SPE4A6-27-T-5001 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of three Snubber Guide Assemblies, identified by NSN 1440010919019. The manufacturing process requires metal casting and the use of specific tooling. Approved sources include Engineered Magnetics Inc and Marvin Engineering Co., Inc., though other offerors may seek source approval from the design control activity. Delivery is required within 20 days after order, with the original required delivery date set for October 6, 2026, shipping FOB Origin to Marine Corps Air Station Beaufort, South Carolina. The contract mandates strict quality and security compliance, including a CMMC Level 2 Self-Assessment and adherence to Covered Defense Information requirements. Inspection and acceptance will occur at the destination based on zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Additionally, the contractor must utilize the Wide Area Workflow system for invoicing and comply with various FAR and DFARS clauses regarding equal opportunity, hazardous material identification, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

BEARING, STAVE SHAPE

Solicitation # SPE7M4-27-T-1919

This solicitation, number SPE7M4-27-T-1919, is a small business set-aside for the procurement of 133 units of stave-shaped bearings (NSN 2010-01-338-3693). These components are Class 3, Size 8, 60 inches long, and manufactured from water-lubricated bonded synthetic rubber with a Shore A durometer of 85 points plus or minus 5 points. The items must adhere to specific military specifications and a length tolerance of +.000/-.060, which is an exception to drawing 803-1385664. Additionally, each stave must be marked with the cure date at the point of manufacture. The contract mandates strict quality and packaging standards, including the use of Qualified Products Lists (QPL) or Qualified Manufacturers Lists (QML). Packaging must follow MIL-STD-2073 Method 10 and MIL-DTL-2845E, requiring individual wrapping in opaque or kraft paper and overpacking in wooden boxes to prevent deformation. Metal strapping and staples are strictly prohibited. The items are designated as Type I Shelf Life with a non-extendable period of 180 months. Delivery is required within 125 days of award, with a need ship date of November 3, 2026, and a final delivery date of March 23, 2027, delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-2211

Solicitation SPE4A7-27-T-2211 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of 75 units of a wiper ring, identified as a commercial off the shelf and critical application item with NSN 1430-00-921-6975. The specific part is identified as Engineered Seal Products Inc 5F263 P/N 006-041. Delivery is required within 152 days after the order, with a need ship date of April 6, 2027, and a final required delivery date of August 18, 2027. The items are to be delivered FOB Origin to the DLA Distribution Depot at Hill AFB, Utah, where both inspection and acceptance will take place. The contract incorporates stringent technical and quality requirements via the DLA Master List, including specific packaging standards such as ASTM D3951 and RP001, and marking requirements per MIL-STD-129. Compliance with the Buy American Act and the Berry Amendment is mandatory for quotes exceeding the micro-purchase threshold. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and adherence to DFARS cybersecurity and reporting standards. Quotations must be submitted via the DIBBS portal by November 4, 2026, and may be subject to the HUBZone price evaluation preference.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

COVER, UMBILICAL PLUG

Solicitation # SPE4A6-27-T-7249

Solicitation SPE4A6-27-T-7249 is a request for quotations issued by the Defense Logistics Agency (DLA) Weapons Support ASC Commodities Division for the procurement of eight umbilical plug covers (NSN 1440-00-091-7640). The contract requires delivery within 91 days after order to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 standards. Payment and invoicing are to be processed electronically via the Wide Area WorkFlow (WAWF) system. The procurement includes stringent technical and security requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls for technical data. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for bare item marking and the removal of government identification from non-accepted supplies. The solicitation provides a price evaluation preference for HUBZone Small Business Concerns and incorporates various FAR and DFARS clauses regarding sustainable products, hazardous material identification, and the prohibition of certain telecommunications equipment. Quotations are due by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

VANE, LEFT HAND, GUID

Solicitation # SPE4A6-27-T-6999

Solicitation SPE4A6-27-T-6999 is issued by the DLA Weapons Support ASC Commodities Division for the procurement of 25 units of VANE, LEFT HAND, GUID (NSN 1420-00-505-0673). This item is designated as a critical application item and must be manufactured in accordance with Basic Drawing NR 30003 2877846, Revision J. Delivery is required by October 6, 2027, with a need ship date of April 20, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with a specific prohibition on the use of mercury or mercury compounds. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include electronic invoicing via Wide Area WorkFlow and quote submission through the DIBBS portal. Key regulatory clauses include DFARS 252.204-7012 for safeguarding covered defense information and various domestic material restrictions, including the Buy American Act and the Berry Amendment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

COVER, PROTECTIVE, GUIDE

Solicitation # SPE4A6-27-T-7101

Solicitation SPE4A6-27-T-7101 is a Request for Quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of nine protective covers for guided missile components, identified by NSN 1420-01-614-4164. The required delivery date is April 23, 2027, with a delivery lead time of 169 days and shipping terms set as FOB Origin. Delivery and inspection are both designated at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance will be managed through sampling methods per MIL-STD-1916 or ASQ H1331, with specific AQLs assigned for critical, major, and minor attributes. Key regulatory requirements include a CMMC Level 2 Self-Assessment, adherence to the Buy American and Balance of Payments Program, and the use of the Wide Area WorkFlow system for electronic invoicing. Quotations must be submitted by November 4, 2026, to the issuing office in Richmond, Virginia.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1630

This fixed-price solicitation, issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain, is for the procurement of one locating ring, identified as a critical application item under NSN 2010-01-082-2412. The item must be manufactured to precise specifications, including an outer diameter of 59 inches, an inner diameter of 56.5 inches, a length of 1.980 inches, and 14 tapped holes. Delivery is required within 242 days after order, with the destination located in Bremerton, Washington. The contractor is required to use a wooden crate for packaging and must adhere to MIL-STD-129 for marking and RP001 for palletization. The contract includes stringent regulatory and security requirements, including CMMC Level 2 certification and strict export controls under ITAR and EAR, requiring an approved US/Canada Joint Certification Program certification for access to technical data. Quality standards mandate that the manufacturer's inspection system comply with ISO 9001:2015, and inspection will be conducted at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. While the solicitation is listed as a total small business set-aside in some metadata, the document text specifies it is not a small business set-aside.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CAP, PROTECTIVE

Solicitation # SPE4A6-27-T-6907

Solicitation SPE4A6-27-T-6907 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of one protective cap, identified by NSN 1440-01-730-0181 and Glenair part number 660-009NF24S4-09. The contract requires delivery within 20 days after order, with an original required delivery date of October 7, 2026. Shipping is established as FOB Origin, with the final destination being F.E. Warren AFB in Wyoming. Inspection and acceptance will both occur at the destination. The procurement is subject to rigorous quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. Additionally, the contractor must adhere to DFARS cybersecurity reporting standards and FAR regulations regarding equal opportunity for workers with disabilities and the prohibition of human trafficking.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

Pressure Switch Component SupplierThe Pressure Switch Component Supplier subcontract involves providing essential raw materials and sub-components to prime contractors manufacturing pressure switches for DLA Land and Maritime. The scope of work includes the delivery of high-grade alloys, specialized polymers, conductive materials, springs, electronic contacts, and specialized seals. All supplied materials must adhere to strict performance tolerances and specific coating requirements to ensure operational integrity. To maintain quality standards, the supplier is required to provide comprehensive material certifications and Certificates of Conformance for all deliveries. The contract falls under NAICS code 335999 and supports the Department of Defense. Interested parties should note the response deadline of November 4, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

Pressure Switch Manufacturer (NSN 5930-01-324-5328)This subcontract involves the manufacture and supply of pressure switches, specifically NSN 5930-01-324-5328, for prime contractors supporting DLA Land and Maritime hardware. The selected provider must utilize precision machining and assembly equipment to fabricate these switches in strict accordance with military specifications or approved technical data. A critical requirement of the contract is the submission of application packages through the DLA Weapons Support Alternate Offer/Source Approval Request Program to obtain AMC 3C approval. This opportunity falls under NAICS code 335313 and is managed by the Department of Defense.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 16 hours ago

DEADLINE

Switch, Pressure

Solicitation # CM26239122

DLA Land and Maritime, specifically the FMS Tactical LTC Team at DLA Weapons Support - Columbus, is conducting a sources-sought market survey for the procurement of Pressure Switches under NSN 5930-01-324-5328. The agency is seeking information from potential vendors regarding delivery timelines, quantity capabilities, and pricing structures to determine the feasibility of an Indefinite Delivery Contract with a proposed three-year base period and subsequent one-year option periods. The government is specifically looking for data on commercial availability and is requesting drawings or bills of materials to identify similarities between commercial and military equivalents. The current approved source for this item is Cameron Energy Services Corp, identified by CAGE code 05991 with multiple associated part numbers. Due to the AMC 3C designation, this part requires engineering source approval to maintain quality, as the approved sources retain essential technical data and manufacturing knowledge. Other companies wishing to be qualified as approved sources must submit an application package through the DLA Weapons Support Alternate Offer/Source Approval Request Program to demonstrate their ability to manufacture the product to the same or better quality than the original equipment manufacturer. Responses should be directed to Contract Specialist Caitlin Ferry by the deadline of November 4, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 16 hours ago

DEADLINE

INSULATING COMPOUND,ELECTRICAL

Solicitation # CM26161009

This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

HEADSET-MICROPHONE : NSN 5965-01-204-8505

Solicitation # SPE7MX26RX089

This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7MX26RX102

DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.

POSTED

DEADLINE

MULTI NSN DIESEL ENGINE

Solicitation # CM26259595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

VALVE, REGULATING, FL

Solicitation # CM26163006

DLA Weapons Support is conducting a sources sought action under project number CM26163006 to identify potential manufacturers for a regulating fluid valve, identified by NSN 4810010865757. The agency is seeking to establish a long-term contract with an estimated annual quantity of 301 units. This opportunity falls under NAICS code 332912 for Fluid Power Valves and Hose Fittings manufacturing, with a small business size standard of 1,000 employees. Because the agency does not possess the drawings or specifications for these items, interested parties must submit the required documentation per DLAD 52.217-9002 to become approved sources. Prospective bidders are required to complete a market survey and spreadsheet, providing manufacturer locations and points of contact. All responses must be submitted to Kristina Blanton by October 29, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

in about 12 hours

Earlier notices in this NAICS code

Posted before this notice, open and closed

14--COVER,ACCESS,GUIDED

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

14--HANDGRIP ASSEMBLY,R

Solicitation # SPE7M825T2992

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

LAUNCHER CONTROL

Solicitation # N0010425QQB84

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

14--CAP,END,LAUNCHER

Solicitation # SPE4A625T902Y

POSTED

over 1 year ago

CLOSED

over 1 year ago

20--ROD SECTION,VALVE

Solicitation # SPE7M425T7293

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7M425T7250

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # N0010425QAA85

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

M299 Longbow Hellfire - Sole Source to Lockheed Martin

Solicitation # SPRRA225R0030

Al DLA Aviation At Huntsville

POSTED

over 1 year ago

CLOSED

over 1 year ago

14--COVER ASSY,LAUNCHER

Solicitation # SPE4A625PG590

Defense Logistics Agency

POSTED

over 1 year ago

CLOSED

over 1 year ago

14--CARTRIDGE,COMBINATI

Solicitation # SPE4A625T828U

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # N0010425QAB80

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

Traverse Servo Amplifier Assembly

Solicitation # FA820625Q0109

FA8206 Afsc Pzaca (icbm)

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS