Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity was posted on September 23, 2009. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

24--The U.S. Army Corps of Engineers, Engineer Research and Developoment Center, Vicksburg, MS request quotations for a Fork Truck.

Closed
W912HZ-09-P-0435Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 1 hour ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
RFP 07-135 Roseville Electric Utility – Air Compressor Maintenance
Solicitation # 07-135
The City of Roseville is soliciting proposals under RFP 07-135 for a consultant to provide comprehensive scheduled preventive and corrective maintenance for air compressors and auxiliary systems, including Ingersoll Rand equipment. The services will be performed at the Roseville Energy Park and Sunset Energy Center in California. The selected consultant will be responsible for providing all necessary labor, technical expertise, specialized tooling, and materials. This is a prevailing wage project with an initial contract duration of five years, estimated to commence in April or May. Proposals must be submitted by December 16, 2026, via email to the City Clerk or through physical delivery in a sealed container with the required Attachment H label. The award will be based on a formal evaluation panel process considering the firm's experience and qualifications (25 points), the proposed project plan (35 points), and cost (40 points), with potential interviews for top candidates. Requirements for the successful bidder include obtaining a City of Roseville business license, providing 100% faithful performance and labor and materials bonds, and maintaining specific insurance policies. Consultants must also disclose any conflicts of interest and adhere to the Levine Act regarding political contributions.
City of Roseville

POSTED

about 7 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Roseville Electric Utility – Gas Compressor Maintenance
Solicitation # 07-137
The City of Roseville is soliciting proposals for Gas Compressor Maintenance Services to support the Roseville Energy Park and the Roseville Energy Center and RPEAK. The selected contractor will provide all labor, supervision, technical expertise, specialized tooling, equipment, and materials necessary for both scheduled preventive and corrective maintenance on natural gas compressors, specifically Gas Packagers and Ariel models, and their associated auxiliary systems. The contract is intended to run for an initial term of five years, with services estimated to commence in April or May. This is a prevailing wage project requiring adherence to all fair employment laws, with certified payroll required for contracts exceeding 25,000 dollars. The successful proposer must provide a 100 percent Faithful Performance Bond and a 100 percent Labor and Materials Bond. Proposals are due by December 17, 2026, and must include a Proposer’s Certification, a Non-collusion Declaration, a Levine Act Disclosure Statement, and proof of active registration with the California Secretary of State. Award will be made to the responsible proposer determined to be the most advantageous to the City through a formal evaluation panel process. Invoicing is to be submitted monthly, delineated by task and personnel, with payment terms set at 30 days following receipt of satisfactory services.
City of Roseville

POSTED

about 7 hours ago

DEADLINE

in about 2 months

AI Contract Overview

Show more

The U.S. Army Corps of Engineers, Engineer Research and Development Center, is seeking quotes for a firm fixed price contract to purchase one new 7000 lb capacity diesel forklift for research model building at its Vicksburg, Mississippi location. The required equipment must be a P7000-D model or equivalent, featuring a triplex mast, pneumatic tires, and an EPA-compliant PurePOWER S4S diesel engine. Essential optional equipment includes an air-conditioned cab, side shifting fork positioner, fire extinguisher, and a drawbar pin. The successful vendor must provide a 60 month or 10,000 hour extended full coverage warranty and deliver the equipment F.O.B. to the specified Vicksburg address. This is a commercial item procurement utilizing simplified acquisition procedures under NAICS code 811310. Proposals will be evaluated based on best value, and all interested firms must be registered in the Central Contractor Registration to be eligible for award.

General Info

US Army Corps of Engineers seeks quotes for one 7000 lb diesel forklift.

Agency

N/A

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

U.S. Army Engineer Research & Development Center (ERDC), Waterways Experiment Station (WES) 3909 HALLS FERRY ROAD , VICKSBURG

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyN/A
ContactsNo contacts available
OfficeN/A
Organization / Agency
N/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation is a Request for Quote (RFQ). This requirement is being a commercial item and we are utilizing simplified acquisition procedures. The associated North American Industry Classification System (NAICS) code for the procurement is 811310. The U.S. Army Corps of Engineers, Engineer Research and Development Center Contracting Office, has a requirement for a firm fixed price contract for a 7000 lb capacity Fork-Truck with Optional Equipment. Specification for LIFT EQUIPMENT: 1. General: The Contractor shall provide one (1) new 7000 lbs. capacity forklift. This machine shall be use for research model building around remote job sites at ERDC Vicksburg, MS. The machines shall be in accordance with the following standard and optional equipments 2. Fork Lift Standard Equipment Requirements: The Contractor shall provide one new P7000-D, Diesel, 7000# Capacity, I.C. with Pneumatic Tire rated capacity @ 24 load center. Vinyl Static Fold-Down Seat Tilt Steering Column with Mechanical Quick Return Feature Elongated Grab Bar Wrapped Steel Hip Restraint Open Step with Anti-Slip Plate Separate Brake and Inching Pedals Rubber Floor Mat Electronic Fingertip Shift Control 3-Section Valve with Cowl Mounted Hydraulic Levers Magnetic Convenience Tray with Clipboard Holder Presence Detection System (PDS) Featuring: Transmission Interlock, Mast and Auxiliary Hydraulic Lockout, Parking Brake Warning, Seat Belt Warning Ground Speed Control; Dual-Action Parking Brake Handle Two Forward LED Work Lights -OHG Mounted Rear Combination LED Stop/Tail/Back-Up Lights Electronic Backup Alarm; High Visibility Mast Display Panel, Including: Neutral Transmission Indicator, Combination Park Brake and Brake Fluid Level Warning, Transmission Oil Warning, Engine Oil Pressure Warning, Seat Belt Reminder Warning, Diagnostic Warning, Alternator (Battery Charging Status) Warning, Fuel Gauge, Mast Interlock Indicator, Engine Coolant Temperature Gauge, Combination Hourmeter and Diagnostic Display; PurePOWER S4S Diesel Engine EPA-Compliant Emission System U.L. Rated Model Single Speed Powershift (Automatic) Transmission Engine Return to Neutral for Start Electronic Vehicle Control, Featuring: Engine Protection System Monitoring Engine Coolant Temperature, On-Board Diagnostics (With Event History), Brake Fluid Level Monitoring, Isolated (Rubber-Mounted) Key Components, Including: Hydraulic Control Valves, Transmission, Engine, Radiator, Exhaust System, Steer Axle, Secondary Lift Cylinders On Mast Heavy Duty Counterweight Grille Full Hydrostatic Power Steering Drive-By Wire Throttle Control (Via Accelerator Pedal) Cyclone Air Filter; High Position Air Intake Aluminum Core Corrugated Fin Radiator High Thrust 10-Blade Engine Fan; Maintenance-Free Battery Anti-Restart Ignition Switch; Fully Insulated Steel Engine Hood Drive and Steer Tires - Single Pneumatic, Air-Filled 500 Hour Service Intervals Underbelly Screen Cat Lift Truck Advantage Coverage: First Planned Maintenance Free, Parts Fast or Parts Free, Free Loaner Guarantee 2.1 Machine Specifications: Mast: ITA Class III&&&&&&&.High Visibility Triplex MFH 186.0 max. OAL 90.5 max. FFH 42.5 min Tilt Cylinders &&&&&&&&&&&&&&&&&.&&&& 6 Deg Fwd/6 Deg Back Integral Side shifter&&&&&&&&&&&&&&&&&..&&.59.0 Wide (48 Overall Width) Forks - Hook Type, ITA Class III&&&&&&&... Pallet (Pair) Length 48 max. Width 4.9 Thickness 2.0 Load Backrest&&&&&&&&&&&&&&&&&&&&&&&&&..&.48 High - Included With Mast Internal Hosing&&&&&&&&&&&&&&&&&&&&&&&&&&..&.Dual Function - Triplex Mast Hydraulic Valve&&&&&&&&&&&&&&&&&&&&.&&.4-Section Valve w/4 Cowl Mounted Levers Drive Tires&&&&&&&&&&&&&&&&&&&&&&&&&.&&.. Dual Solid Soft Ride - 28 x 9-15 Steer Tires&&&&&&&&&&&&&&&&&&&&&&&&&&&&&.&&. Solid Soft Ride - 6.5 x 10 Overhead Guard&&&&&&&&&&&&&&&&&&&&&..&..&&&&& See 2.2 Air Condition Cab Seat &&&&&&&&&&&&&&&&&&&&&&&&&..&.Fold-Down Full Suspension Vinyl Exhaust System&&&&&&&&&&&&&&&&&&&&&&&&&&&&.& Standard Muffler Warning Device Light&&&&&&&&&&&&&&&&&&&&.&&. Amber Strobe (Mtd Below OHG) Paint&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&..&&&&&&.&. Yellow 2.2 Optional Items for Forklift: The following items shall be provide for machine or equal. Service Indicator Package Drawbar Pin Fire Extinguisher (Attachment) Martin Air Conditioned Cab (Side Shifting Fork Positioner) 3. Warranty: The Vendor shall provide the Government with a 60 Months / 10,000 Hours Extended Full Coverage Warranty 4. Shipping: F.O.B. Delivered Deliver all equipments to: DPW Attn: Vince Durman 3909 Halls Ferry Road Vicksburg, MS 39180 -6199 Telephone: +1 (555) 000-0000 All interested firms must be registered in the Central Contractor Registration. The Government will award a contract resulting from this synopsis/solicitation to the responsible offeror whose offer meets or exceeds all the specifications will be most advantageous to the Government, and other factors considered in accordance with FAR 52.212-2. Evaluation will be based on best value. The following provisions apply to this acquisition: 52.212-1 Instructions to Offerors-Commerical Items; 52.212-2 Evaluation Commercial Items; 52.212-3, Offeror Representations and Certification-Commercial Items, 52.222-19 Child LaborCooperation with Authorities and Remedies, 52.222-25 Affirmative Action Compliance, 252.225-7000 Buy American ActBalance of Payments Program Certificate and 252.212-7000, Offeror Representations and Certifications Commercial Items. The following clauses apply to this acquisition: 52.212-4 Contract Terms and Conditions-Commercial Items; Clause 52.212-5; Contract Terms and Conditions required to Implement Statutes or Executive Orders-Commercial Items; 52.217-8 Option to Extend Services; 52.217-9 Option to Extend the Terms of the Contract; 52.219-6 Notice of Small Business Set-Aside; 52.222-3 Convict Labor, 52.233-3 Protest After Award, 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration, 52.247-34 FOB Destination, 52.252-2 Clauses Incorporated by Reference, 52.222-26 Equal Opportunity, 52.222-35 Affirmative Action for Disabled Veterans and Veterans of the Vietnam Era, 52.222-36 Affirmative Action for Workers with Disabilities, 52.222-37 Employment Reports on Disabled Veteran and Veterans of the Vietnam Era, 52.222-21 Prohibition of Segregated Facilities, 52.222-22 Previous Contracts and Compliance Reports, 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items, 252.225-7001 Buy American Act and Balance of Payment Program, 252.225-7002 Qualifying Country Sources As Subcontractors, 252.225-7036 Buy American North American Free Trade Agreement Implementation ActBalance of Payments Program, 252.243-7001 Pricing of Contract Modifications, are hereby incorporated by reference. All offerors shall Submit the following: 1) Original and one (1) copy of a proposal; 2) A completed copy of the Provision at 52.212-3 Offeror Representations and Certification-Commercial Items And 252.212-7000 Offeror Representation and Certifications-Commercial Item, which may be downloaded at www.arnet.gov/far All quotes should be mailed to Elizabeth Kelley, ERDC-Contracting, 3909 Halls Ferry Road, Vicksburg Ms 39180 or emailed to: contact@example.gov Submission shall be received by: 12:00 pm CST 25 September 2009. Point of Contact: Elizabeth Kelley, Contract Specialist +1 (555) 000-0000.

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS