THIS IS AMENDMENT 0001 which extends the closing time and date to 5:00 p.m. local Baghdad time, 7 September 2004, and replaces the Brand Name or Equal specifications in its entirety as follows: 1. Standard Characteristics (Equal or Equivalent): a. General: Overall length: 5,300 mm (209) 1) Overall width: 2,500 mm (98) 2) Maximum turning radius over body: 6,500 mm (256) 3) Fitting radius, front clearance (max): 2,400 mm (94) 4) Fitting radius, rear clearance: 1,600 mm (63) 5) Maximum speed forward (unladen): 35 km/h (22 mph) 6) Minimum speed reverse (unladen): 15 km/h (9 mph) 7) Minimum tractive force: 240 kN (54 lbf) 8) Minimum payload: 80,000 kgs (76,370 lbs) b. Engine: Diesel with direct fuel injection, Turbo-charged, type Euro II 1) 170 kW (228 HP) or higher 2) Engine cooling system operating temperature range from 10'C (50'F) to 45'C (113'F) and maximum operating relative humidity of 100% 3) Engine air inlet system will be Donaldson type or equivalent; cyclonic pre-cleaner; and double-stage dry paper element type with air-restriction indicator; air inlets will be at least 1,600mm (62.99) above ground level. 4) Heavy duty type silencer, mounted in an upswept position 5) Heavy duty engine oil filters with replaceable filter elements 6) 200 liters (53 gals) minimum fuel tank capacity 7) Automatic engine shut-off protection system with warning buzzer to monitor the following conditions (via a solenoid valve at the injection pump): Low engine oil pressure, High engine oil temperature, High coolant temperature, High transmission oil temperature c. Transmission: 1) 4 x 4 power shift or fully automatic transmission incorporating a torque converter with multiple stages for forward and reverse 2) The transmission will drive the hydraulic pumps 3) The transmission oil system will have a separate oil cooler and full flow heavy duty oil filter with replaceable elements. Operating temperature range from 10'C (50'F) to 45'C (113'F). d. Front Axle: 1) 30 tons minimum static axle load 2) Hub-centering/double-centering type rims with 10 studs 3) Heavy duty type with steel spring suspension 4) Hydraulic shock absorbers 5) Protective rings for the front wheel nuts e. Rear Axle: 1) 40 tons minimum static axle load 2) Hub-centering/double-centering type rims with 10 studs 3) Heavy duty type double-reduction drive 4) Air suspension with automatic level control f. Tires: 11 x 20 - PR 16 minimum, Pneumatic type g. Lifting Capacity: 1) Fully oscillating 5th wheel capable of lifting an imposed 5th wheel load of 30 tons (60,000 lbs) 2) Minimum lowered 5th wheel height: 1,150 mm (45.3) 3) Maximum raised 5th wheel height: 2,100 mm (82.7) 4) Heavy duty extension, hydraulically operated lift rams 5) Minimum lifting stoke: 1,000 mm (39.4) 6) 5th wheel locking device actuated by air pressure h. Steering: 1) Left-side orientation 2) Hydraulic steering i. Brake System: 1) Drum/disc type, dual circuit, air-operated, engine driven compressor 2) Capable to handle terminal chassis of 60 tons (120,000 lbs) minimum 3) Capable to handle fully-loaded roll trailers, which are not equipped with brakes, of 60 tons (120,000 lbs) minimum 4) Spring-type independent parking brake j. Frame: 1) Welded steel, torsion-resistant frame 2) Equipped with rear skid plate to facilitate the pick-up of semi-trailers 3) Equipped with heavy duty bumpers for light protection 4) Equipped with anti-slip walkways 5) Equipped with towing couplings for drawbars at the front and rear 6) Include anti-corrosion paint including primer, intermediate coat, and top coat 2. Cab Features: a. Operator's Cabin: 1) Single operator capacity 2) Mounted on anti-vibration rubber mountings 3) Hydraulically tiltable for easy access to maintain the engine 4) Comply with ROPS criteria ISO 3471 5) Equipped with a sliding door at the rear of the cab and a lateral door 6) Swivel seat with gearshift and steering logic 7) Tinted safety glass 8) Windshield wipers in the front and rear 9) Terminal connections for 2-way radio system in cab b. Operator's Console: 1) Include: a) Hourmeter b) Voltmeter c) Fuel gauge d) Pressure gauge e) Temperature gauge f) Oil gauge g) Torque converter oil temperature gauge h) Ammeter charging, 2) Include warning light for the following: a) Engine oil pressure warning light b) Torque converter oil pressure light c) Alternator control d) Parking brake indicator e) King-pin locking device indicator 3) Include warning light and buzzer for the following: a) Air pressure b) Engine coolant c) Engine oil pressure d) Torque converter oil temperature e) Torque converter oil pressure 4) Include next service interval meter 5) Back-lit instrument panel with industry standard icons c. Insulated firewall covering (engine side) d. Heater/Defroster/Fresh Air e. Seat belt 3. Safety Features: a. Electronic back-up alarm b. Safety hydraulic lock valves and counterbalance valves supplied on the load-bearing hydraulic cylinders c. King-pin locking device indicator d. Rotating warning light mounted on top of cab e. Lighting system: 1) Headlights 2) Stop/tail lights 3) Directional indicator lights (front/rear) 4) Floodlight mounted to the rear top of cabin to illuminate the coupling 5) Rotating warning beacon f. Supply one 2-kg or 5-lb powder fire extinguisher, cabin mounted 4. Electrical System: a. 24-V system b. Include two batteries of 12-V, 140 Ah at a 20-hr rate, maintenance free and suitable for temperature range from 10'C (50'F) to 45'C (113'F) c. Central fuse box 5. Vehicle Colors: Will be determined by the purchaser upon award. 6. Spare Parts: Provide spare parts for a 3,000 hours operating period (included in the price of the CLIN). All other terms and conditions remain unchanged.
