Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

25--ARM ASSEMBLY,PIVOT,

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This predicted recompete opportunity involves the procurement of pivot arm assemblies for the Department of Defense, specifically through DLA Land and Maritime. The current contract, held by Centerline Manufacturing Ltd under contract number SPE7L026V1055, has a value of 34,715 dollars and is expected to end on October 27, 2026. The procurement is classified as a firm fixed price contract and was previously competed under SAP. The upcoming requirement is listed as a pre-forecast with a NAICS code of 336330. There is a medium confidence level that this will be a recompete opportunity. The primary point of contact for this requirement is Rebecca Merz, and the managing office is located in Columbus, Ohio.

General Info

DLA Land and Maritime pivot arm assembly recompete, firm fixed price, NAICS 336330.

Agency

Department Of Defense → DLA Land And Maritime

NAICS

336330 - Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

Place of Performance

OH, 770416201, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedApr 27

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Rebecca Merz

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: SPE7L026V1055 Incumbent: CENTERLINE MANUFACTURING LTD. Contract Value: $34,715 Potential End Date: 2026-10-27T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 55/100)
https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=53a89c64a57e46ca88ce829e5f19149d

Similar Contracts

Same NAICS industry code

Supply of Steering Drag Link (NSN 2530-01-499-0900)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the procurement or manufacture of one Steering Drag Link for US Army Logistics Readiness Center projects. The component must be Battle Motors Inc. part number 76C-27 and strictly adhere to NSN 2530-01-499-0900 specifications. The project falls under NAICS code 336330 and requires delivery FOB Origin to Fort Hood, Texas. The contractor must ensure full compliance with DFARS 252.225-7001 Buy American requirements and DFARS 252.204-7012 cybersecurity standards. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

LINK ASSEMBLY, TRACK

Solicitation # SPE7L1-27-T-2874

Solicitation SPE7L1-27-T-2874 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for one link assembly, track, identified by NSN 2530-01-629-7622. The requirement is for a single unit to be delivered to Fort Riley, Kansas, within 10 days after receipt of order. This procurement is open to full and open competition with a price evaluation preference for HUBZone small business concerns. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and origin inspection is required. The contract includes stringent regulatory and security requirements, including CMMC Level 2 certification and strict adherence to ITAR and EAR export controls. Prohibited materials include Class I ozone-depleting chemicals and hexavalent chromium. Packaging must follow MIL-STD-129 and ASTM D3951, with specific requirements for hazardous materials under TQ IP025. Invoicing and payment must be processed electronically through the Wide Area Workflow system. All quotations must be submitted via the DIBBS portal by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

DRAG LINK, STEERING

Solicitation # SPE7L1-27-T-2835

Solicitation SPE7L1-27-T-2835 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one steering drag link, identified by NSN 2530-01-499-0900 and Battle Motors Inc. part number 76C-27. The item is to be delivered FOB Origin to the US Army Logistics Readiness Center at Fort Hood, Texas, with a required delivery date of October 23, 2026, and a delivery window of 10 days after award. Inspection and acceptance will take place at the destination per FAR 52.246-2. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Palletization must follow DLA requirement RP001, and the use of mercury or mercury compounds in packaging is prohibited. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program under DFARS 252.225-7001. Additionally, the contractor must comply with cybersecurity reporting standards under DFARS 252.204-7012 and hazardous material labeling requirements per DFARS 252.223-7001.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

TIE ROD, STEERING

Solicitation # SPE7LX-27-U-0108

Solicitation SPE7LX-27-U-0108 is a request for quotations issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of steering tie rods under NSN 2530-01-558-5031. This is a unilateral, fixed-price, indefinite-quantity contract with a maximum value of 350,000.00 USD. The requirement is for an estimated quantity of 5 units, with approved part numbers including Oshkosh Defense LLC 3689233 and Rana Rhythm Automotive USA L-24-VT-9049-A-12 or L24VT9049A13. Delivery is required within 125 days after receipt of order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, alongside DLA packaging requirement RP001. Hazardous materials must be handled and labeled according to IP025 and the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The solicitation is categorized under NAICS code 336330 and requires compliance with various Federal Acquisition Regulation clauses, including those regarding equal opportunity, combating trafficking in persons, and safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-2882

Solicitation SPE7L1-27-T-2882 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one brake disc, identified as NSN 2530-01-713-9297 and Oshkosh Aerotech, LLC part number 627-8476-003. This is designated as a critical application and restricted source item, requiring engineering source approval by the Government Design Control Activity. The required delivery date is October 23, 2026, with a delivery window of 20 days after the order. Shipping is FOB Origin, and both inspection and acceptance will occur at the destination, specifically Naval Base Guam. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It prohibits the use of Class I ozone-depleting chemicals and requires compliance with the Buy American Act and the Berry Amendment. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and registration in the System for Award Management. Cybersecurity compliance is required under NIST SP 800-171 and DFARS 252.204-7012. Quotes must be submitted through the DIBBS portal, and offerors are encouraged to provide quantity ranges to facilitate procurement flexibility.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

HUB, WHEEL, VEHICULAR

Solicitation # SPE7L1-27-T-2853

Solicitation SPE7L1-27-T-2853 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of two vehicular wheel hubs, identified by NSN 0001016547023 and part number 008-430-03. The contract specifies a delivery timeframe of five days after receipt of order, with an original required delivery date of October 28, 2026. Terms are FOB Origin, while both inspection and acceptance are to take place at the destination in Edinburgh, Indiana. The procurement is subject to strict technical and quality standards, including packaging requirements per ASTM D3951 and RP001, and marking and labeling in accordance with MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, notably those concerning the Buy American Act, cybersecurity safeguarding under DFARS 252.204-7012, and prohibitions on covered telecommunications equipment. The solicitation is categorized under NAICS code 336330 and requires submissions through the DLA BID BOARD SYSTEM.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

HUB, WHEEL, VEHICULAR

Solicitation # SPE7L3-27-T-0835

Solicitation SPE7L3-27-T-0835 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supplier Opns Vehicle SPT for 348 units of Vehicular Wheel Hubs (NSN 2530-01-063-5666). This procurement is designated as a HUBZone set-aside, providing a price evaluation preference to certified HUBZone concerns. The items must be manufactured using a forging process, which requires specific tooling. Delivery is required within 75 days after receipt of order, with a final delivery destination in New Cumberland, Pennsylvania. The contract mandates strict technical and security compliance, including CMMC Level 2 certification and adherence to ITAR or EAR export controls for technical data. Quality assurance requires the manufacturer to maintain an ISO 9001:2015 compliant system, with technical inspection and acceptance occurring at the origin. Packaging must follow Special Packaging Instruction AK10635666 and MIL-STD-129, with a strict prohibition on mercury compounds. Additionally, the government prohibits the use of additive manufacturing for these parts unless specifically authorized. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2757

Solicitation SPE7L1-27-T-2757 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of two detent plates, identified by NSN 2530-01-685-1669. This is a restricted source item requiring engineering source approval from the Government Design Control Activity. The required delivery is 20 days after receipt of order, with the destination being the General Depot of Naval Supplies in Kaohsiung City, Taiwan. Inspection and acceptance are both conducted at the origin. The contract mandates strict quality and technical compliance, requiring manufacturers to maintain an inspection system compliant with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Additive manufacturing is prohibited unless specifically authorized. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA RP001 requirements. Technical data is subject to ITAR or EAR export controls, and contractors must be approved by the DLA controlling authority to access such data. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including CMMC Level 2 certification requirements, the Buy American Act, and prohibitions on covered defense telecommunications equipment. Sampling for acceptance must follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

HUB, WHEEL, VEHICULAR

Solicitation # SPE7L1-27-T-2782

Solicitation SPE7L1-27-T-2782 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of six vehicular wheel hubs, identified by NSN 2530-01-650-9683. The requirement is issued under the First Destination Transportation program, requiring offers to be submitted based on FOB Origin. Delivery is required within 10 days after the order, with the destination point of inspection and acceptance located in Poland. This procurement is not a small business set-aside, and all quotes must be submitted electronically via the DLA Internet Bid Board System. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1E for preservation and MIL-STD-129 and ASTM D5445 for labeling. Palletization must comply with DLA requirement RP001. Invoicing and receiving reports are to be processed through the Wide Area WorkFlow system. The agreement incorporates various DFARS and FAR clauses, including those regarding cybersecurity incident reporting, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Technical and quality requirements are governed by the DLA Master List, and the contractor is responsible for ensuring package designs are adequate for safe delivery.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

PARTS KIT, STEERING GEA

Solicitation # SPE7L3-27-T-0838

Solicitation SPE7L3-27-T-0838 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of 23 steering gear parts kits. The required items are identified by NSN 2530-01-738-3328, with acceptable part numbers including Hamilton Jet, Inc. P/N 111235 or Kraft Power Corporation P/N 111235. This procurement is designated as a Service-Disabled Veteran-Owned Small Business set-aside, requiring vendors to be certified by the Small Business Administration to be eligible for award. The contract specifies a required delivery date of March 18, 2027, with delivery and inspection points set at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to MIL-STD-2073-1 Appendix D for kits and RP001 requirements, while marking must comply with MIL-STD-129. Key restrictions include a total prohibition on Class I ozone-depleting chemicals and strict adherence to the Buy American Act and Berry Amendment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

TIE ROD END, STEERING

Solicitation # SPE7L1-27-T-2703

Solicitation SPE7L1-27-T-2703 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of steering tie rod ends for 1980 Ford P/U trucks (F100/F150). The requirement consists of two line items, each for a quantity of 4 units (total of 8), under NSN 2530-01-187-7299. The contract specifies a delivery timeframe of 5 days after order, with an original required delivery date of October 26, 2026. Delivery is FOB Origin, and both inspection and acceptance will occur at the destination, specifically the US Army 0015 CS BN CO A Distribution center at Fort Hood, Texas. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per TQ requirement IP025. Technical and quality requirements are governed by the DLA Master List, and the removal of government identification from non-accepted supplies is required per RQ011. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. The acquisition is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and specific DFARS clauses regarding cybersecurity and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

WHEEL ASSEMBLY, PNEUMAT

Solicitation # SPE7LX-27-U-0114

Solicitation SPE7LX-27-U-0114 is a request for quotations issued by the DLA Weapons Support Strategic Acq Program Directorate for the procurement of pneumatic tire wheel assemblies, specifically Hutchinson Industries part number AS-1609-080, NSN 2530017230184. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and an estimated annual quantity of 34 units, though this quantity is not firm. The contract specifies a delivery period of 73 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials should be packaged per ASTM D3951, while hazardous materials must follow the Hazard Communication Standard and TQ requirement IP025. Award evaluation is based on the price quoted for the estimated annual demand, and the buy may be eligible for automated award provided the offeror does not propose used or remanufactured items. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

Pressure Switch Component SupplierThe Pressure Switch Component Supplier subcontract involves providing essential raw materials and sub-components to prime contractors manufacturing pressure switches for DLA Land and Maritime. The scope of work includes the delivery of high-grade alloys, specialized polymers, conductive materials, springs, electronic contacts, and specialized seals. All supplied materials must adhere to strict performance tolerances and specific coating requirements to ensure operational integrity. To maintain quality standards, the supplier is required to provide comprehensive material certifications and Certificates of Conformance for all deliveries. The contract falls under NAICS code 335999 and supports the Department of Defense. Interested parties should note the response deadline of November 4, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

Pressure Switch Manufacturer (NSN 5930-01-324-5328)This subcontract involves the manufacture and supply of pressure switches, specifically NSN 5930-01-324-5328, for prime contractors supporting DLA Land and Maritime hardware. The selected provider must utilize precision machining and assembly equipment to fabricate these switches in strict accordance with military specifications or approved technical data. A critical requirement of the contract is the submission of application packages through the DLA Weapons Support Alternate Offer/Source Approval Request Program to obtain AMC 3C approval. This opportunity falls under NAICS code 335313 and is managed by the Department of Defense.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 23 hours ago

DEADLINE

Switch, Pressure

Solicitation # CM26239122

DLA Land and Maritime, specifically the FMS Tactical LTC Team at DLA Weapons Support - Columbus, is conducting a sources-sought market survey for the procurement of Pressure Switches under NSN 5930-01-324-5328. The agency is seeking information from potential vendors regarding delivery timelines, quantity capabilities, and pricing structures to determine the feasibility of an Indefinite Delivery Contract with a proposed three-year base period and subsequent one-year option periods. The government is specifically looking for data on commercial availability and is requesting drawings or bills of materials to identify similarities between commercial and military equivalents. The current approved source for this item is Cameron Energy Services Corp, identified by CAGE code 05991 with multiple associated part numbers. Due to the AMC 3C designation, this part requires engineering source approval to maintain quality, as the approved sources retain essential technical data and manufacturing knowledge. Other companies wishing to be qualified as approved sources must submit an application package through the DLA Weapons Support Alternate Offer/Source Approval Request Program to demonstrate their ability to manufacture the product to the same or better quality than the original equipment manufacturer. Responses should be directed to Contract Specialist Caitlin Ferry by the deadline of November 4, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 23 hours ago

DEADLINE

INSULATING COMPOUND,ELECTRICAL

Solicitation # CM26161009

This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

HEADSET-MICROPHONE : NSN 5965-01-204-8505

Solicitation # SPE7MX26RX089

This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7MX26RX102

DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.

POSTED

DEADLINE

MULTI NSN DIESEL ENGINE

Solicitation # CM26259595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Inspection ServicesThis subcontract opportunity with DLA Land and Maritime involves providing high-precision non-destructive testing and inspection services for prime contractors on manufacturing projects. The selected provider will be responsible for verifying Critical Safety Item characteristics using X-ray, Ultrasonic, or Magnetic Particle equipment in strict accordance with MIL-STD 1916. Key deliverables include detailed inspection reports and certifications of compliance to ensure all safety and quality standards are met. To be eligible, contractors must possess a valid CAGE code and ensure all equipment is calibrated to Government standards. The work is performed in Columbus, Ohio, under NAICS code 541380. Interested parties must submit their responses by October 29, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

in about 5 hours

Earlier notices in this NAICS code

Posted before this notice, open and closed

25--ARM,STEERING GEAR

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

Solicitation: PUMP ASSEMBLY, POWER; NSN: 2530-01-576-7989

Solicitation # W912CH-25-Q-0075

POSTED

over 1 year ago

CLOSED

over 1 year ago

25--DRAG LINK,STEERING

Solicitation # SPE7LX25U5617

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

25--ARM,STEERING GEAR

Solicitation # SPE7L125T401R

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

25--WHEEL ASSEMBLY,PNEU

Solicitation # SPE7LX25U5609

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

25--LINING MATERIAL,FRI

Solicitation # SPE7LX25U5620

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

25--TIE ROD END,STEERIN

Solicitation # SPE7L125Q1513

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

25--DRAG LINK,STEERING

Solicitation # SPE7L125Q1516

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

25--TORQUE ROD,TANDEM A

Solicitation # SPE7LX25U5137

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

25--DISK BRAKE SHOE

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

25--PARTS KIT,POWER STE

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

25--TIE ROD END,STEERIN

Solicitation # SPE7L125Q1493

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS