Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

BUSHING AND PIN ASS

Awarded

SPE7L1-26-R-0089Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The solicitation for the BUSHING AND PIN ASSEMBLY, identified by NSN 2530-01-136-7618, will open on or about May 19, 2026, and close on or about June 18, 2026, under contract number SPE7L126R0089. This is an unrestricted acquisition for a quantity of 20,741 units, with no option periods, and requires delivery within 210 days to DLA Distribution Red River at Receiving Bldg 499, 10th Street and K Avenue, Texarkana, TX 75507-5000. The item must be manufactured in strict compliance with multiple referenced drawings and specifications, including Revision C of Drawing 19207 11645131 dated May 29, 1996, and Revision R of MIL-STD-129R dated February 25, 2023, which mandates Type I shelf life of 60 months. Approved Qualified Product List sources include LOC PERFORMANCE PRODUCTS LLC, ROBIN INDUSTRIES, INC., and VAREC NV. Offers must be submitted via hard copy SF 33, scanned and uploaded through the DLA Internet Bid Board System (DIBBS), or emailed directly to [email hidden]. While price is a factor, award will be based on a composite evaluation of price, delivery, and performance. The requirement is not commercial and is being procured under FAR Part 15, as the item is manufactured exclusively for military use. All offers must be in U.S. dollars and in English, and may be subject to the Trade Agreements Act of 1979.

General Info

Procurement of 20,741 Bushing and Pin Assemblies under FAR Part 15, delivery in 210 days.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332710 - Machine Shops

Place of Performance

OH

Set-Aside

NONE

Documents

1

Contract SPE7L1-26-C-0126 Award to Janels Industries Inc

contract-document

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedMay 1

Presolicitation

AwardedOct 28

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

Zachary Rodriguez

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE7L126C0126 posted on DIBBS. Awardee: JANELS INDUSTRIES INC (CAGE 3B8L1) Total Contract Price: $1,643,765.49 Award Date: 08-11-2026 Solicitation: SPE7L1-26-R-0089 Line items: - BUSHING AND PIN ASS (NSN/Part 2530011367618, PR 7015536793)

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M4-27-T-1212

Solicitation SPE7M4-27-T-1212 is a fixed-price procurement issued by the DLA Weapons Support Fluid Handling Division for 21 units of a Disk Assembly, identified by NSN 4820-01-036-2233. The requirement specifies that the items must be mercury-free and prohibits the use of additive manufacturing unless specifically authorized. Delivery is required by October 13, 2026, with a need ship date of October 12, 2026, shipping FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will take place at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements (RA001). Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. Evaluation may include a HUBZone price preference, and the procurement is identified as a candidate for automated award under NAICS code 332710.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE4A5-27-T-1972

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

Precision Machining and Fabrication of U-Bolts (105mm HOW M20 Cannon)This small business set-aside subcontract with the Department of Defense involves the precision machining and fabrication of 248 U-Bolts for 105mm HOW M20 Cannons supporting Watervliet Arsenal projects. The contractor is required to utilize CNC machining equipment to meet strict drawing tolerances specified in Drawing 12591508, Revision Product Baseline, and must ensure all units feature unique item identification marking in accordance with MIL-STD-130. Deliverables for this contract include the finished U-Bolts along with DD Form 1423, a Certificate of Conformance, and comprehensive chemical and mechanical test results. The project falls under NAICS code 332710 and is managed by the W6QK Acc Wva agency.

POSTED

about 20 hours ago

DEADLINE

Manufacture of Mechanical Conduit AssembliesThis subcontract involves the manufacture of custom mechanical conduit assemblies for prime contractors supporting DLA Mechanicsburg. The scope of work requires the fabrication of three specific assemblies identified by NIINs 017027712, 017027714, and 017027719. All production must strictly adhere to TDP Version 002 and specified CAGE codes, with physical identification meeting MIL-STD-130, Rev N standards. To qualify, the provider must possess precision machining equipment and maintain CMMC certification. It is explicitly noted that additive manufacturing is prohibited for these components. The opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense.

SPRMM1 DLA Mechanicsburg

POSTED

about 20 hours ago

DEADLINE

Manufacture of Tailcone (TC) StudsThis small business set-aside subcontract with the Naval Surface Warfare Center, Carderock Division, involves the precision machining and fabrication of 96 Tailcone Studs. The contractor is responsible for procuring raw materials and utilizing CNC machining centers and precision inspection tools to manufacture 8 shipsets of 12 certified studs, ensuring all parts adhere to the dimensions specified in Drawing Ref2.1-(DISTR D)808-T01-07-260807. Key requirements for the project include strict CMMC compliance and the delivery of a Technical Report for the TC Studs as part of CDRL A001. The work will be performed in Bethesda, Maryland, under NAICS code 332710, supporting prime contractors on Department of Defense projects.

POSTED

about 20 hours ago

DEADLINE

Precision Machining & Component FabricationThis subcontract, titled Precision Machining and Component Fabrication, involves the production of replacement parts, brackets, and housings for gearbox radiator assemblies used in Department of the Army UH-60 helicopter projects. The scope of work requires the use of CNC machining, milling, and turning to process aerospace-grade alloys in strict accordance with form, fit, and function technical data. All deliverables must comply with the Buy American Statute to ensure the delivery of qualified machined replacement components. Managed by the Department of Defense under agency W6QK Acc-Rsa, this opportunity is designated as a Total Small Business Set Aside under NAICS code 332710. The solicitation was posted on October 27, 2026, with a response deadline set for December 1, 2026.

POSTED

about 20 hours ago

DEADLINE

in about 1 month

CONDUIT ASSEMBLY,ME

Solicitation # SPRMM127QGA28

Solicitation SPRMM1-27-Q-GA28, issued by DLA Mechanicsburg on October 27, 2026, seeks quotes for the manufacture and supply of multiple Conduit Assembly, ME units. The requirement includes specific National Item Identification Numbers (NIINs) and requires the items to be physically identified according to MIL-STD-130, Rev N. The procurement is issued under SEPA-EAF Authority, with delivery expected as soon as possible on a FOB Destination basis. Inspection and acceptance are both designated to occur at the origin. The contract mandates strict adherence to quality and packaging standards, specifically MIL-STD-2073-1 for preservation and MIL-STD-129 for marking. Offerors must be authorized distributors of the original manufacturer and must provide the Original Equipment Manufacturer (OEM) CAGE code and part number if they are not the manufacturer. Technical acceptability is the primary evaluation factor, with a prohibition on additive manufacturing unless specifically authorized. Administrative requirements include electronic invoicing via the Wide Area Workflow (WAWF) system and compliance with cybersecurity standards under DFARS 252.204-7012 and CMMC certification levels.

SPRMM1 DLA Mechanicsburg

POSTED

about 20 hours ago

DEADLINE

CHASSIS,VME,12 SLOT

Solicitation # SPRMM126QMB73

SPRMM1 DLA Mechanicsburg

POSTED

about 20 hours ago

DEADLINE

U Bolt For Watervliet Arsenal

Solicitation # W911PT27QA021

Solicitation W911PT27QA021 is a total small business set-aside for the procurement of 248 U-Bolts for the 105mm HOW M20 Cannon, divided into two line items of 22 and 226 units. The hardware must be manufactured according to Drawing 12591508, Revision Product Baseline, and must utilize standard AISI grade wrought steels, specifically prohibiting merchant quality, leaded, resulfurized, or rephosphorized steels and castings. Deliverables include the hardware and contract data as specified in the Contract Data Requirements List (DD Form 1423) and general data drawings. The contract is a fixed-price award with a delivery schedule of 150 calendar days from the date of award, shipped FOB Destination to Watervliet Arsenal in New York. Award will be granted to a single offeror providing the lowest evaluated price who meets all material, technical, and responsibility criteria under FAR 9.104. Proposals must be submitted for the total quantity of all items via the PIEE Solicitation Module to be considered responsive. Strict quality and marking requirements are in place, including the need for a Certificate of Conformance, chemical and mechanical test results, and unique item identification marking per MIL-STD-130. Invoicing and receiving reports must be processed electronically through Wide Area WorkFlow. The procurement is subject to various federal regulations, including the Buy American and Balance of Payments Program and safeguarding of covered defense information.

POSTED

about 20 hours ago

DEADLINE

Anchor Tiedown Weldment

Solicitation # N68335-26-Q-1184

Navair Warfare Ctr Aircraft Division

POSTED

about 20 hours ago

DEADLINE

CHASSIS,ELECTRICAL-

Solicitation # N0010426QTC08

This solicitation is for the repair of electrical chassis components under a firm-fixed-price agreement. The government requires a Repair Turnaround Time of 100 days, measured from the physical receipt of the asset to the date of government acceptance. Failure to meet this timeline will result in a price reduction per unit per month, to be implemented via a reconciliation modification. Government Source Inspection is required, and all freight is handled by the Navy per the Commercial Asset Visibility Statement of Work. The contractor must ensure all repairs meet operational and functional requirements based on specified cage codes and reference numbers, with marking adhering to MIL-STD-130. Quotes must include the unit price, total price, and the proposed turnaround time. Additionally, the offeror must provide pricing for testing and evaluation in the event the asset is determined to be beyond economical repair, as well as the price and lead time for a new unit for comparison purposes. Only authorized distributors of the original manufacturer will be considered for the award.

Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

59--CHASSIS,ELECTRICAL-, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYAFE

Solicitation NO0014-26-Q-YAFE, issued by NAVSUP Weapon Systems Support, seeks quotations for the teardown, evaluation, repair, and potential modification of electrical chassis (NSN 7HH 5975-01-689-3871). The objective is to restore Government Furnished Property to an operable condition, defined as functioning and performing as a new unit. The requested Repair Turn Around Time (RTAT) is 39 days, and the government reserves the right to exercise an option for increased quantity up to 100 percent of the initial requirement within 365 days of award. The closing date for submissions is October 23, 2026, at 4:30 PM local time. Offerors must provide an estimated repair price for the full effort and include the cost of new items for evaluation purposes. Following the receipt of carcasses, vendors have 90 days to complete a teardown and evaluation before submitting a firm-fixed-price quote. If the offeror is not the Original Equipment Manufacturer, they must provide the OEM's name, CAGE code, and a signed letter of authorization. Technical requirements include strict adherence to MIL-STD-130 for marking, MIL-STD-2073-1 for packaging, and a total prohibition of metallic mercury. Award evaluations will consider price, capacity constraints, and risk assessments via the Supplier Performance Risk System. All payments will be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Structural Channels (NSN 9540-01-474-4371)

Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

SEALING COMPOUND

Solicitation # SPE8ES-27-T-0191

Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE8ES-27-T-0148

Solicitation SPE8ES-27-T-0148 is a total small business set-aside request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of 72 cases of Resin Epoxy, identified by NSN 8040-01-664-1544. Each case must contain 12 units. The requirement is for delivery FOB Destination to the HAZMINCEN Naval Base Ventura County in Port Hueneme, California, with an original required delivery date of October 23, 2026, and a delivery window of 20 days after the order is placed. The material is classified as a Type I (Code K) item with a non-extendable shelf life of 18 months, calculated from the date of shipment. Due to the hazardous nature of the material, the supplier must provide Safety Data Sheets and Hazardous Communication Standard labels for review and approval prior to the award, adhering to 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific storage instructions to maintain a temperature between 60 and 80 degrees Fahrenheit. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates several critical federal and defense clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination point.

Adhesive Manufacturing

POSTED

about 15 hours ago

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-27-T-0187

Solicitation SPE8ES-27-T-0187, issued by the Defense Logistics Agency Troop Support Construction and Equipment, is for the procurement of six kits of light gray polyurethane coating, identified by NSN 8010014770574. Each kit consists of a gallon can containing 2100g of polyurethane, a 144g bottle of curing agent, and a stir stick. The items are subject to a non-extendable shelf life of 12 months and must be delivered to Borcea Air Base, Romania, with an original required delivery date of October 26, 2026. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to hazardous material standards, requiring the submission of Safety Data Sheets and labels in accordance with 29 C.F.R. 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including Special Marking Code 32 for shelf-life items. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of certain telecommunications equipment.

Paint and Coating Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE8E5-27-T-0303

Saw Blade and Handtool Manufacturing

POSTED

about 15 hours ago

DEADLINE

ELBOW, HOSE, FIRE FIG

Solicitation # SPE8E6-27-T-0374

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

STEP ASSEMBLY, GRIP

Solicitation # SPE8E6-27-T-0294

Solicitation SPE8E6-27-T-0294 is a request for quotation issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one Step Assembly, Grip, identified by NSN 4210015694605 and Pierce Manufacturing Inc part number 1348996. The requirement is categorized under NAICS code 326111. Delivery is required within 10 days of award, with an original required delivery date of May 6, 2026. The shipment is FOB Origin and will be delivered to the South Carolina Army National Guard in Eastover, South Carolina. Inspection and acceptance will take place at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001, with the DLA Master List of Technical and Quality Requirements taking precedence. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. The contract incorporates numerous FAR and DFARS clauses, including requirements for safeguarding covered defense information, Buy American Act compliance, and the prohibition of certain telecommunications equipment. Offerors must represent their size status and domestic origin of supplies, and the procurement is subject to destination inspection per FAR 52.246-1.

Plastics Bag and Pouch Manufacturing

POSTED

about 15 hours ago

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E5-27-T-0304

POSTED

about 15 hours ago

DEADLINE

EXTINGUISHER, FIRE

Solicitation # SPE8E6-27-T-0384

All Other Miscellaneous Textile Product Mills

POSTED

about 15 hours ago

DEADLINE

LIGHT, NAVIGATIONAL, AIR

Solicitation # SPE8E7-27-T-0129

Solicitation SPE8E7-27-T-0129 is a fixed-price procurement issued by the Defense Logistics Agency Troop Support for one aircraft navigational light, identified by NSN 6220015760036 and part number 30-3055-1. The requirement is for a single unit with an original required delivery date of October 7, 2026, and a delivery lead time of 20 days after receipt of order. Delivery is FOB destination, with shipping addresses provided for both a parcel post location in the United States and a freight destination at Kadena Air Base in Okinawa, Japan. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following DLA requirement RP001. Invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation includes various DFARS and FAR clauses covering cybersecurity, whistleblower rights, and prohibitions on certain telecommunications equipment. Offerors must submit quotes via the DIBBS portal by October 26, 2026, and are encouraged to provide quantity ranges. Evaluation may include a HUBZone price preference, and the submission of a Safety Data Sheet is required for hazardous materials to avoid being deemed non-responsible for award.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0380

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 15 hours ago

DEADLINE

HARNESS ASSEMBLY, MASK,

Solicitation # SPE8E6-27-T-0295

Solicitation SPE8E6-27-T-0295 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of 25 oxygen mask harness assemblies, identified by NSN 4240-01-392-6079 and part number 460-190-457. The contract is awarded to Interspiro Inc., located in Branford, Connecticut. Delivery is required within 20 days after receipt of order, with an original required delivery date of October 19, 2026. The items are to be delivered FOB Origin to the Seal Delivery Vehicle Team 2 in Virginia Beach, Virginia, with both inspection and acceptance occurring at the destination. The procurement is subject to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor must adhere to DLA packaging requirements (RP001) and avoid the use of plastics for wrapping or cushioning where permitted. Compliance with the Berry Amendment and Buy American Act is required, and any use of non-domestic materials must be disclosed. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and adherence to DFARS cybersecurity standards for safeguarding covered defense information.

Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Pump Components and Raw Materials

SPRMM1 DLA Mechanicsburg

POSTED

CLOSED

about 1 month ago

Special Tooling and Serialized Component Procurement

POSTED

CLOSED

Small Arms Component and Spare Parts Supplier

Acquisitions - Aqm Momentum

POSTED

CLOSED

49--FILLER AND BLEEDER,

Solicitation # N0038326QPC09

Navsup Weapon Systems Support

POSTED

CLOSED

about 2 months ago

49--PULLER,ENGINE SHAFT

Solicitation # SPE4A5-26-T-342M

Defense Logistics Agency

POSTED

CLOSED

Precision Machined Tube Fittings (Nipple, Tube Union Type)

FLUID HANDLING DIVISION

POSTED

CLOSED

Precision Machining of Quick Disconnect Coupling Halves

FLUID HANDLING DIVISION

POSTED

CLOSED

Precision Machining for Valve Components

Defense Logistics Agency

POSTED

DEADLINE

Precision Machining of Straight Shaft (NSN 3040-01-658-3106)

LAND SUPPLY CHAIN

POSTED

CLOSED

Precision Machined Bracket Supply

Defense Logistics Agency

POSTED

DEADLINE

Precision Machined Straight Shaft Manufacturing

LAND SUPPLY CHAIN

POSTED

CLOSED

Supply of Helical Compression Spring (NSN: 5340081841199)

LAND SUPPLY CHAIN

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS