Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

25--CAP,FILLER OPENING

Active

SPE7L326T124CFederal

Response Deadline07/31/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The solicitation seeks quotes for 63 units of CAP,FILLER OPENING with NSN 2590010991473, to be delivered to W1A8 DLA DISTRIBUTION within 157 days after order placement. This is a combined solicitation issued under solicitation number SPE7L326T124C, available exclusively online through the SAM.gov platform, with no hard copies provided. All responsible vendors may submit electronic quotes, which must be received by the deadline of July 31, 2026. The product falls under NAICS code 336992 and is procured by the DLA Land and Maritime agency, headquartered in Columbus, Ohio. Digitized technical documents including military specifications and drawings can be accessed electronically. Inquiries must be directed via email to the designated point of contact, with instructions provided in the solicitation document accessible via the SAM.gov link or through DIBBS.

General Info

63 CAP FILLER OPENING units due in 157 days via SAM.gov by July 31, 2026, for DLA Land and Maritime.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

336992 - Military Armored Vehicle, Tank, and Tank Component ManufacturingView NAICS

Place of Performance

OH

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedJul 20

Combined Synopsis

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 12:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

contact@example.gov

Full Description

Show more

Proposed procurement for NSN 2590010991473 CAP,FILLER OPENING: Line 0001 Qty 63 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0157 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

CAP, FILLER OPENINGThe item specified is a CAP, FILLER OPENING, to be manufactured using a metal casting process, requiring specialized tooling for production. A total of 63 units are requested under solicitation SPE7L3-26-T-124C, with delivery due within 157 days from award. The procurement is governed by the Defense Logistics Agency and falls under NAICS code 336992, targeting federal suppliers with performance occurring in New Cumberland, Pennsylvania. Compliance with stringent quality and technical requirements is mandatory, including adherence to the DLA Master List of Technical and Quality Requirements, and specific documentation controls such as Configuration Change Management via Engineering Change Proposals and Inspection and Acceptance at Origin. The item contains components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating strict supplier qualification. Export control regulations apply to associated technical data, subject to either ITAR or EAR, prohibiting unauthorized transfer to foreign persons or entities, including domestic subsidiaries of U.S. firms. Access to this controlled data is restricted to contractors holding U.S./Canada Joint Certification Program approval, having completed mandatory DOD export control training, and obtained formal authorization from DLA. Packaging must meet DLA procurement standards, and non-accepted supplies must have government identification removed per specified directives. Cybersecurity compliance is required at CMMC Level 2 through a certified third-party assessment organization. All responses to this solicitation must be submitted by July 31, 2026, with primary point of contact Matthew Curry at the Defense Logistics Agency.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

FLANGE HALF, UNLOADIThe item is a flange half designed for unloading purposes, identified by NSN 2590-00-673-1601, with a quantity of 70 units required under purchase request 7017101928. Delivery is scheduled within 164 days after order date. The solicitation number is SPE7L3-26-T-061V, issued by the Department of Defense through Land Supplier Operations Vehicle Support, with a response deadline of July 23, 2026, and a posting date of July 20, 2026. The NAICS code 336992 applies, and performance is to occur in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Matthew Curry, reachable via email and phone provided. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, regardless of location, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs handling of this data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and approval from the DLA controlling authority may access the controlled technical data. Distribution is strictly limited to qualified entities, and compliance with DLA packaging and export control requirements is mandatory for all contractors.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

CAP, FILLER OPENINGThe contract solicitation SPE7L1-26-T-849J solicits 12 units of CAP FILLER OPENING with NSN 2590-00-078-2994 for delivery to Naval Air Station Fallon, Nevada, within 20 days of request. Deliveries must be made FOB origin with no variance allowed in quantity, inspected and accepted at destination, and packaged in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and packaging codes. Packaging, preservation, and marking are prohibited from containing mercury or mercury compounds under all circumstances, except for specific exempted functional applications defined by NAVSEA, and Class I ozone-depleting chemicals are entirely banned. The item is classified as critical, with listed parts from BRP US INC required for compliance, and shipment must use traceable freight methods only—parcel post is strictly forbidden. The product must comply with DLA’s Master List of Technical and Quality Requirements referenced in RP001 and RA001, and all substitute chemicals require prior approval unless explicitly authorized by specification. The delivery address is designated as N60495, Building 25, with receiving contact information provided, and the required delivery date is July 15, 2026, with a solicitation response deadline of July 30, 2026. The contract adheres to DoD unit of issue standards and references approved conversion tables. Special marking is not required, and palletization must align with DLA packaging protocols. The contracting activity originates from the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact. All supplies must meet the stringent environmental and functional standards outlined, including the use of shock-proof and double-contained mercury devices if exempted, and adherence to federal acquisition guidelines governing critical applications and hazardous material restrictions.

LAND SUPPLY CHAIN

POSTED

DEADLINE

FENDER, VEHICULARThe Defense Logistics Agency is seeking two vehicular fenders under NSN 2510-01-706-2537 through a Firm Fixed Price solicitation, with a required delivery within 123 days after order. This is a Fair Opportunity Procurement under the Joint Light Tactical Vehicle Competitive Initiative Program, restricted exclusively to listed JLTVCI Prime Contract holders, including Trimian Industries Inc., Oshkosh Defense LLC, AM General LLC, Ruta Supplies Inc., and SupplyCore LLC. Only these entities are eligible for award; all other contractors are disqualified unless pricing from prime holders is deemed not fair and reasonable, triggering a potential transition to a simplified acquisition. The items must conform strictly to Technical Data Package Rev A Gen 1 and multiple engineering drawings dated between 2017 and 2026. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, RP001 DLA packaging requirements, and Special Packaging Instruction AK17062537 Revision A. Technical and quality requirements identified by R or I numbers from the DLA Master List are incorporated by reference. The contract mandates Cybersecurity Maturity Model Certification (CMMC) Level 2 certification for any Third-Party Assessment Organization involved. Export-controlled technical data subject to ITAR or EAR regulations applies, requiring offerors and their supply sources to hold approved US/Canada Joint Certification Program status, complete mandatory DOD export control training and the DLA questionnaire, and obtain DLA approval for data access. All invoicing must be processed electronically via Wide Area Workflow using a SAM-registered point of contact. The inspection and acceptance point is at the destination, with Certificate of Conformance procedures authorized unless withheld by a Quality Assurance Letter of Instruction. The solicitation is not a small business set-aside, and no government estimate or ceiling price is provided. Responses must be submitted to the DLA Land and Maritime Strategic Acquisition Program Directorate by the deadline of July 24, 2026.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

BOAST RFOP - Mount, Telescope - NSN: 1240-01-277-0473The Army Contracting Command – Detroit Arsenal is soliciting proposals under the Basic Ordering Agreement Sustainment Track program for a Firm-Fixed-Price order of 22 telescope mounts, identified by NSN 1240-01-277-0473 and part number 12599175, with two optional 12-month periods each for an additional 20 units. This is a Total Small Business Set-Aside, exclusively open to vendors with an active, fully executed BOAST Basic Ordering Agreement in place by the proposal deadline of August 17, 2026. The contract vehicle requires compliance with export control regulations, as the item involves controlled technical data; vendors must be certified in the Joint Certification Program to access the required documentation, with non-certified parties required to submit DD Form 2345 to the designated U.S./Canada Joint Certification Office. All solicitation details, amendments, and submission instructions are disseminated exclusively through SAM.gov, and participants are responsible for monitoring the posting regularly as no mailing list is maintained. The North American Industry Classification System code is 336992, and the delivery terms are FOB destination with inspection and acceptance based on origin. Proposals will be evaluated solely on price under a Lowest Price Technically Acceptable framework. Vendors without an existing BOAST agreement are encouraged to initiate the continuous on-ramp process but must have a fully executed agreement prior to the closing date to be eligible for award.

POSTED

DEADLINE

MOLDING, METALThis contract specifies the procurement of metal molding components under solicitation SPE7L3-26-T-121P, with a single line item requiring ten units of NSN 2590-01-568-5877 at a unit price of $10.00, totaling $100.00. The item is designated as a restricted source requiring government engineering source approval and is classified as a critical application item, with approved suppliers limited to ND DEFENSE LLC and NATIONAL SEATING COMPANY. Delivery must be made FOB origin within 128 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 but is superseded by all applicable DLA Master List of Technical and Quality Requirements, with labeling and palletization strictly following MIL-STD-129 and RP001 standards. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the original required delivery date is October 14, 2026, with a need ship date of December 3, 2026. Transportation directives are governed by DLAD PROC NOTES C19 and C20. The contract was issued by the Department of Defense under the NAICS code 336992, with Viviane Kounkorgo listed as the primary point of contact.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

GEAR, SPURThe contract is for a single spur gear identified by part number 8738923 and NSN 3020-00-690-2892, with a total quantity of one unit priced at $1.00. Delivery is required within ten days of award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, and marking must adhere to MIL-STD-129 without special codes. Palletization follows DLA packaging requirements, and the item must be shipped via the fastest traceable means, excluding parcel post, to the designated military facility in Bluffdale, Utah. The contractor must meet cybersecurity requirements under CMMC Level 2 through a self-assessment and incorporate technical and quality standards referenced from the DLA Master List. The contract is issued under solicitation SPE7L1-26-T-840L, with a response deadline of July 27, 2026, and a required delivery date of July 14, 2026. The NAICS code is 336992, and the contracting activity falls under the Department of Defense’s Land Supply Chain.

LAND SUPPLY CHAIN

POSTED

DEADLINE

ARMOR, SUPPLEMENTAL,The solicitation SPE7L4-26-T-5685 seeks seven units of supplemental armor with NSN 2540-01-533-8142 for delivery to the DDSP New Cumberland Facility in Pennsylvania, with a delivery schedule of 230 days after order placement, and FOB origin terms apply. All deliverables must comply with stringent packaging and marking standards, including MIL-STD-129 for labeling and barcoding, ASTM D3951 for non-hazardous packaging, and FED-STD-313 and TQ IP025 for hazardous materials, with DLA’s RP001 governing palletization. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, requiring prior authorization from the Department of State or Commerce before any disclosure to foreign persons, domestically or abroad, with DFARS 252.225-7048 mandating compliance; access is restricted to DLA contractors who hold JCP certification, have completed required training, and received explicit approval from the DLA controlling authority. Cybersecurity requirements include mandatory CMMC Level 2 certification for the contractor and its third-party assessors, with adherence to NIST SP 800-171 and the Basic Safeguarding of Covered Contractor Information Systems clause to protect controlled unclassified information. The contract imposes comprehensive compliance obligations including the Hazardous Materials Identification and Safety Data Sheet requirement, Sustainable Products standards, Employment Eligibility Verification, Combating Trafficking in Persons, and Equal Opportunity for Workers with Disabilities, all under deviation 2026-00038. Inspection and acceptance occur at the destination facility, governed by FAR 52.246-2, requiring contractors to maintain a qualified inspection system aligned with SAE AS9003 or ISO 9001, and to ensure all items meet applicable quality standards. Invoicing must be submitted exclusively through WAWF, with payment routed using a designated DoDAAC, and no contract value is specified due to the absence of unit pricing data. The solicitation requires submission via DIBBS by July 27, 2026, with all proposers obligated to provide accurate UEI and CAGE codes and to certify their size and socioeconomic status, including potential eligibility for small business, WOSB, SDVOSB, HUBZone, or SDB programs; joint ventures must

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

ARMOR, SUPPLEMENTAL, SMAThis contract requires the delivery of two units of supplemental armor for small arms, identified by NSN 2540-01-533-8038 and part number 0257027365-00, under solicitation SPE7L4-26-T-5682. The items must be delivered FOB origin within 134 days of contract award, with no variance allowed in quantity, and are subject to inspection at the destination. Packaging must strictly comply with DLA’s requirements, including MIL-STD-129 labeling and RP001 palletization standards; if the material is hazardous per FED-STD-313, it must be packaged in accordance with TQ requirement IP025, otherwise commercial packaging under ASTM D3951 is acceptable, though all DLA Master List requirements take precedence. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specification. The contractor must comply with CMMC Level 2 self-assessment requirements and ensure all government identification is removed from non-accepted supplies. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of December 9, 2026, and the original delivery deadline was October 14, 2026. The contract is issued under the Department of Defense, with technical and quality requirements referenced from the DLA Master List, and all unit of issue and packaging data must be applied as specified.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

ARMOR, SUPPLEMENTAL,This contract, issued under solicitation SPE7L4-26-T-5704 by the Department of Defense’s LSO Combat Vehicles and Armament office, calls for the delivery of two units of supplemental armor plate identified by NSN 2540015548540, with delivery required within five days after award by July 15, 2026. The item must be shipped FOB origin, with title and risk of loss transferring to the government upon loading at the contractor’s facility, and final inspection and acceptance occurring at the destination: Fort Polk, Louisiana. Packaging requirements are stringent and governed by DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; non-hazardous items must be commercially packaged per ASTM D3951 unless overridden by a DLA technical requirement, while hazardous materials must comply with TQ Requirement IP025 and FED-STD-313. All packaging and labeling must adhere fully to MIL-STD-129, including barcoding and palletization per RP001, and no government identification may be removed from non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized by the specification. The contract incorporates multiple cybersecurity and data protection mandates, including CMMC Level 2 self-assessment compliance and adherence to NIST SP 800-171 requirements for safeguarding covered defense information, along with provisions requiring notification of potential safety issues and compliance with hazard communication standards. Contractors must register in and use Wide Area WorkFlow for invoicing, and all proposals must be submitted electronically via the DLA Internet Bid Board System by the July 27, 2026 deadline. The contract includes clauses on small business representation, employment eligibility, trafficking in persons, accelerated payments to small business subcontractors, unauthorized obligations, and whistleblower rights, alongside deviations to standard FAR clauses regarding subcontracts, disclosure of information, and compensation of former DoD officials. No unit pricing or total contract value is specified in the available documentation, and while representations regarding Unique Entity ID, CAGE code, and socioeconomic status are required, no affirmations from the offeror are present in the provided content.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

KIT, HEAT EXCHANGERThe contract issued by the Defense Logistics Agency (DLA) under solicitation number SPE7L1-26-T-845W is a total small business set-aside for the procurement of 83 kits of heat exchangers, designated by NSN 5340015665655 and part numbers 1842127C93 and 1842127C94, sourced from ND DEFENSE LLC. Delivery is required at the DLA Distribution facility in New Cumberland, Pennsylvania, with a delivery window of 221 days from award and a need ship date of March 6, 2027, following an original required delivery date of October 14, 2026. The FOB point is origin, and inspection and acceptance occur at the destination. All items must be packaged and labeled in strict compliance with MIL-STD-129 for marking, labeling, and barcoding, and palletization must adhere to RP001, DLA’s Packaging Requirements for Procurement. If the material is classified as hazardous per FED-STD-313, packaging must meet TQ Requirement IP025; otherwise, commercial packaging under ASTM D3951 is required, though DLA’s Master List of Technical and Quality Requirements takes precedence over ASTM standards. The contract mandates full compliance with all applicable DFARS and FAR clauses, including prohibitions on hexavalent chromium, restricted Chinese military company supplies, export-controlled items, and the use of mandated arbitration agreements. Cybersecurity protections under 252.204-7012 and mandatory reporting of cyber incidents within 72 hours are required, along with adherence to the Hazard Communication Standard and prohibition on storing or disposing of hazardous materials without authorization. Payment must be processed via Wide Area WorkFlow (WAWF), and offerors must hold a valid Unique Entity ID and CAGE code. The solicitation is restricted to small businesses, and contractors must self-represent their size and socioeconomic status in SAM.gov. All proposals must be submitted electronically through the DLA Internet Bid Board System (DIBBS) by the deadline of July 27, 2026, and no pricing data is currently filled in the contract line item, though historical unit costs for similar items range between $71.08 and $72.79.

LAND SUPPLY CHAIN

POSTED

DEADLINE

GEAR CLUSTERThe GEAR CLUSTER item is procured under solicitation SPE7L1-26-T-840J with a single unit requirement of 1 EA, identified by NSN 3020-00-690-2760 and part number 8738927. Manufacturing must utilize a metal casting process, requiring specific tooling, and sourcing guidance is provided through DLA’s Aviation or Land & Maritime Supply Chains teams. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revision control tied to the solicitation or award date depending on acquisition scale. Delivery is due within 10 days of contract award, FOB origin, with no tolerance for quantity variance and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including preservative method 20, wrap material GH, and cushioning JC with specified thickness, all contained in an E5 unit container and marked per MIL-STD-129 with no special markings. Palletization must adhere to DLA packaging standards, and the item must be shipped by the fastest traceable means, excluding parcel post, to the designated government facility in Bluffdale, Utah. The required delivery date is July 14, 2026, with a response deadline of July 27, 2026, and the primary point of contact is Kristina Derry.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

59--MICROCIRCUIT,LINEARThe contract involves the procurement of 26 units of the microcircuit, linear with NSN 5962010512101, to be delivered to DLA Distribution DDWO within 221 days of award. Only approved sources—MC01602-2 from manufacturers 07180, 0WEC9, 50721, and TS-3339 from 54485—are eligible to respond. The solicitation is issued as an RFQ under the number SPE7M526T336S and is exclusively available electronically through the provided SAM.gov link; no hard copies are offered, and no specifications, plans, or drawings are included. The opportunity is set aside entirely for small businesses under the SBA program as defined by FAR 19.5, with NAICS code 334413 indicating the classification for semiconductor and related device manufacturing. All responsible sources may submit quotes electronically, and submissions must be received by the deadline of July 31, 2026. The contracting office is the DLA Land and Maritime based in Columbus, Ohio, with communications directed to the designated buyer email provided in the solicitation.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

49--TESTER,ACETYLENEThe U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for two units of NSN 4940012744587, a Tester, Acetylene, to be delivered to DLA Distribution Cherry Point within 157 days after award. The solicitation, numbered SPE7M4026T271J, was posted on July 20, 2026, with a response deadline of July 31, 2026, and is issued as a combined solicitation under NAICS code 333310. Only electronic quotes are acceptable, and hard copies are not available; all submissions must be made through the official online portal. The approved source for this item is identified as 6L827 C3-019-99-003, and while no specifications, plans, or drawings are provided, all responsible sources may submit a quote provided it is received on time. The point of contact for questions is listed with an email address, and further details can be accessed via the SAM.gov link provided. The contract office is located in Columbus, Ohio, and the place of performance does not specify a city or state beyond the delivery location.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

59--SOLENOID,ELECTRICALThe contract solicitation seeks electrical solenoids with NSN 5945004077030 under an RFQ issued by the DLA Land and Maritime office in Columbus, Ohio, with a response deadline of August 4, 2026. A minimum of four units must be ordered, with an initial line item for 30 units to be delivered within 61 days, though the overall procurement is structured as a potential Indefinite Delivery Contract valid for one year or until aggregate orders reach $350,000, with an estimated two orders annually. Deliveries will be directed to multiple DLA depots across CONUS and OCONUS locations through consolidated and containerized shipping. Only approved sources—25628 01085.0002 and 81978 C2J380Y—are eligible to respond. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 333612, and quotes must be submitted electronically through the SAM.gov platform; no hard copies or technical specifications, plans, or drawings are provided. All responsible sources may submit bids if received by the deadline, and inquiries must be directed via the designated email address listed in the solicitation.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

DEADLINE

30--CYLINDER ASSEMBLY,ACTUThe U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 78 CYLINDER ASSEMBLY, ACTU units under NSN 3040014388050, with an estimated annual order volume of four and a guaranteed minimum of eleven units. This solicitation may result in an Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, with deliveries requiring consolidation and containerization for shipment to various CONUS and OCONUS DLA depots. The approved source for this item is 1YHH8 6623297, and all quotes must be submitted electronically via the SAM.gov portal by the deadline of August 4, 2026. This is a total small business set-aside under NAICS code 333613, with no hard copies of the solicitation available and no specifications, plans, or drawings provided. The point of contact for inquiries is listed via email, and responses must come from responsible sources received in a timely manner to be considered.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

30--RATCHET WHEELThe U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 259 ratchet wheels with NSN 3020010039124 under a total small business set-aside, with responses due by August 4, 2026. The solicitation, identified as SPE7LX26U8873, is issued as a combined request for quote through SAM.gov and requires electronic submission only; hard copies are not available. The contract, if awarded, will be structured as an indefinite delivery contract with a one-year term or until the cumulative value of orders reaches $350,000, with an estimated four orders annually and a guaranteed minimum purchase of 38 units. Delivery is to various CONUS and OCONUS DLA depots via consolidated container shipments, with a required delivery timeline of 6 days after order placement. Only approved sources—SS-367321-1, 87029-01, and 367321-1—are eligible to respond. The NAICS code is 333612, and all responsible small business concerns may submit quotes provided they meet the deadline. Technical specifications, plans, or drawings are not provided, and inquiries must be directed to the primary point of contact via email.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

DEADLINE

59--MICROCIRCUIT,LINEARThe U.S. Department of Defense through DLA Land and Maritime is issuing a combined solicitation for 50 units of the microcircuit linear with NSN 5962011407689, designated under the NAICS code 334419 and set aside entirely for small businesses. The procurement is solicited via an RFQ with electronic submission only, and no hard copies are available; interested parties must access the solicitation through the provided SAM.gov link. Approved sources are limited to three specific part numbers: PIC8032 from manufacturers 12969 and 43611, and 7109258-002 from 93322. All responsible sources may submit quotes that are received by the deadline of July 31, 2026, and any timely submission will be considered for award. Delivery is to DLA Distribution DDWO with a required delivery timeframe of 52 days after order award. No technical specifications, plans, or drawings are provided, and inquiries must be directed via email to the designated buyer contact, with additional information accessible through the DIBBS website using the solicitation number SPE7M126T219W. The office is located in Columbus, Ohio, and the point of contact information is listed in the solicitation document under block 5.

Other Electronic Component Manufacturing

POSTED

DEADLINE

53--PACKING,PREFORMEDThe solicitation seeks quotes for 8,710 units of NSN 5330014441227 PACKING,PREFORMED under contract SPE7LX26U8876, with performance required by DLA Land and Maritime in Columbus, Ohio. The procurement is conducted as an RFQ with electronic submission only, and all responsible sources may respond if quotes are received by the August 4, 2026 deadline. The resulting contract may be an Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first, with an estimated four orders annually and a guaranteed minimum of 1,306 units. Deliveries will be made to multiple CONUS and OCONUS DLA depots via consolidation and containerization points. Digitized technical specifications and drawings are accessible electronically, and no hard copies are provided. The point of contact for inquiries is listed as DibbsBSM@dla.mil, with additional details available through the SAM.gov portal using the solicitation number.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

53--CAP,PROTECTIVE,DUSTThe U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 8 protective dust caps identified by NSN 5340014849131, to be delivered to W1A8 DLA DISTRIBUTION within 158 days of award. This procurement is conducted via a Request for Quotation with no hard copies available; all submissions must be made electronically. Only approved sources, identified by part numbers 66935 065-25081-000 and 66935 665-25081-000, are eligible to respond. No specifications, plans, or drawings are provided, and all responsible sources may submit a quote if received by the deadline. The solicitation, identified as SPE7L126T856D, was posted on July 20, 2026, and responses are due by July 31, 2026. The North American Industry Classification System code is 332510, and inquiries must be directed via email to the primary point of contact listed in the solicitation document, accessible through the provided SAM.gov link.

Hardware Manufacturing

POSTED

DEADLINE

53--PLATE,RETAINING,SEALThe U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for one retaining seal plate with National Stock Number 5340015257394, requiring a quantity of ten units to be delivered to W1A8 DLA Distribution. The solicitation, identified by number SPE7L1255Y, was posted on July 20, 2026, with responses due by July 31, 2026, and delivery must be completed within 229 days of award. The item falls under NAICS code 332510 and is being procured through a combined solicitation with no set-aside restrictions, allowing all responsible sources to submit quotes electronically; hard copies are not available. The approved source for this item is vendor 99167 with part number 1705149, and no specifications, plans, or drawings are provided. All submissions must be made electronically via the SAM.gov portal, and inquiries should be directed to the designated point of contact at DibbsBSM@dla.mil, with additional information accessible through the provided link or DIBBS website using the solicitation number. The contracting office is located in Columbus, Ohio, with no specific place of performance defined beyond the delivery address.

Hardware Manufacturing

POSTED

DEADLINE

59--CONNECTOR,RECEPTACLThe U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for eight connectors, receptacle, identified by NSN 5935004624724, to be delivered to DLA Dist San Joaquin with a required delivery window of 144 days after award. The approved source for this item is 77820 with part number 348-33E18-85S1, and no specifications, plans, or drawings are available. The solicitation, numbered SPE7M526T336T, is a combined RFQ posted on July 20, 2026, with quotes due by July 31, 2026, and must be submitted electronically; hard copies are not accepted. This procurement is set aside exclusively for Women-Owned Small Businesses under NAICS code 334417, and all responsible sources meeting this criterion may respond. The point of contact for questions is listed as DibbsBSM@dla.mil, with further details accessible via the SAM.gov link or DIBBS website using the solicitation number. Performance location details are unspecified, and the offering office is based in Columbus, Ohio.

Electronic Connector Manufacturing

POSTED

DEADLINE

30--LEADSCREW,SCREW JACThe solicitation seeks four lead screws, screw jac, identified by NSN 3010017323696, to be delivered to W1A8 DLA DISTRIBUTION within 208 days of award. The only approved source for this item is vendor 57855 with part number D2758-01-00. This is a full small business set-aside under the SBA program, with the NAICS code 333612, meaning only small business concerns are eligible to respond. The procurement is conducted as a Request for Quotation (RFQ) with no hard copies available; all submissions must be submitted electronically. Specifications, plans, or drawings are not provided, and any responsible source may submit a quote as long as it is received by the deadline. The solicitation number is SPE7L326T123T, posted on July 20, 2026, with responses due by July 31, 2026. The contracting activity is managed by the DLA Land and Maritime office in Columbus, Ohio, and all inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

DEADLINE

59--SWITCH,RADIO FREQUEThe contract solicits two radio frequency switches with NSN 5985014635144 for delivery to W1A8 DLA DISTRIBUTION within 157 days after award. Only two approved sources are authorized to respond: 32187 MD-012C047 and 49956 11476015. The procurement is conducted via a Request for Quotation issued under solicitation number SPE7M5526T336M, with no hard copies available; all quotes must be submitted electronically through the designated SAM.gov portal. The solicitation opens on July 20, 2026, and closes on July 31, 2026. No specifications, plans, or drawings are provided, and all responsible sources are invited to submit quotes if they meet timely submission requirements. The acquiring activity is the Department of Defense through DLA Land and Maritime, located in Columbus, Ohio, with primary point of contact for inquiries being the buyer listed in block 5 of the solicitation document. The NAICS code is 334220, indicating a classification under Radio and Television Broadcasting and Communications Equipment Manufacturing.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE