Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

25--FILTER ELEMENT,FLUI

Awarded

SPE7L126U0304Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is an indefinite delivery vehicle with an estimated quantity of 120,000 units and a ceiling value of $350,000.00 for the procurement of filter elements for fluid systems. The solicitation number is SPE7L126U0304, awarded under NAICS code 333310, which pertains to other commercial and service industry machinery manufacturing. The award notice was posted on April 27, 2026, and is managed by the DLA Land and Maritime agency, a component of the Department of Defense, operating out of Columbus, Ohio, with a mailing address of 43218-3990. There is no specified place of performance indicated, and the set-aside type is not applicable or provided. Primary point of contact for inquiries is Jennifer Payne, reachable via email at JENNIFER.PAYNE@DLA.MIL or by phone at 614-692-1629. The contract details can be accessed through the official SAM.gov portal using the provided UI link.

General Info

Indefinite delivery contract for 120,000 fluid system filter elements, $350,000 ceiling, DLA Land and Maritime, SPE7L126U0304.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

Contract Value

$0

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

OH

Set-Aside

NONE

Awardee

SAJJAD, ZAINAB S.View Profile

Award Issued Date

04/27/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedApr 7

Combined Synopsis

AwardedApr 27

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Jennifer Payne

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Indefinite Delivery Contract: Estimated quantity 120.000 ; Not to Exceed 350,000.00

Similar Contracts

Same NAICS industry code

CARRIAGE, BINOCULAR

Solicitation # SPE7LX-26-U-9812

Solicitation SPE7LX-26-U-9812 is a request for quotes for the procurement of 12 binocular carriages, identified by NSN 6650-00-418-2128. Issued by the Department of Defense's Strategic Acquisition Program Directorate under DLA Land and Maritime, the requirement involves a metal casting process that necessitates specific tooling. The procurement is structured as a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars and a performance period of one year. Delivery is required within 190 days after the order is placed, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract imposes stringent technical and security requirements, including CMMC Level 2 certification and compliance with ITAR or EAR export controls. All technical data is restricted, and access is limited to approved contractors with US/Canada Joint Certification Program certification. Quality assurance is managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and packaging must adhere to MIL-STD-129. Additionally, the award includes a price evaluation preference for certified HUBZone small businesses and prohibits the use of additive manufacturing unless specifically authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 21 hours ago

DEADLINE

Supply of Key Washers (NSN 5310012077567)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Mobile Pressure Washer Trailers (Guam)

Solicitation # FA524026Q0042

Solicitation FA524026Q0042 is a request for quotes from the Department of the Air Force, 36th Contracting Squadron, for the procurement of three mobile pressure washer trailers to be delivered to Andersen Air Force Base, Guam. This is a 100 percent small business set-aside under NAICS code 333310. The required equipment must feature a minimum 500-gallon water capacity, 3,500 PSI hot and cold water capability, dual-wand operation, and DOT-compliant chassis and components. All items must comply with the Buy American Act, and products from China are strictly prohibited. Delivery is required within 180 days after receipt of the order on a FOB Destination basis, meaning the contractor is responsible for all shipping and delivery charges to Guam. The award will be a firm-fixed-price contract based on best value, evaluating offers first for technical acceptability and then by total evaluated price. Amendment 0001 extended the offer due date to September 17, 2026, at 11:00 AM ChST and updated the salient characteristics and provisions. Eligible offerors must submit quotes electronically, including their UEI, CAGE code, and tax ID. Technical submissions should include detailed product literature or catalog cuts to demonstrate compliance. Payment will be processed electronically through the Wide Area WorkFlow system.

FA5240 36 Cons Lgc

POSTED

DEADLINE

46--COIL,OSMOSIS DESALINAT

Solicitation # SPE8E8-26-T-5570

Solicitation SPE8E8-26-T-5570 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of two osmosis desalination vessel coils, identified by NSN 4620014111121. This is a total small business set-aside under NAICS code 333310. The required items must adhere to specific physical dimensions, including a nominal overall height of 10.69 inches, an overall diameter of 13.00 inches, and a tube length of 42 feet. The procurement is designated as a critical application item and must comply with Basic Drawing NR 53711 6777165, Revision E. Quotes must be submitted electronically via the DIBBS system by September 21, 2026. The government will not evaluate or award contracts to offers utilizing additive manufacturing processes. Delivery is required by March 22, 2027, with a need ship date of March 1, 2027, shipping FOB Destination to the DDSP New Cumberland Facility in Pennsylvania. Compliance with the Buy American Act, the Berry Amendment, and MIL-STD-129 for marking and MIL-STD-2073-1E for packaging is mandatory. Invoicing and payment must be processed through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Intent to Sole Source - Parachute Simulator

Solicitation # 18CONS-PARASIM-26

The Department of the Air Force intends to award a firm-fixed-price sole source delivery order to Systems Technology, Inc. for the installation and training associated with the PARASIM system, specifically including BA-30 LPP Harness and PLD Bar integration. This procurement is being conducted under the GSA Federal Supply Schedule, with the justification that Systems Technology, Inc. holds all proprietary and engineering rights to the system. The agency asserts that using any other provider would void warranties and compromise system integrity. While this is a notice of intent for a sole source award, any responsible source capable of meeting the requirements may submit a capability statement to the contracting officer, SrA Austin Robey. Documentation must include technical capabilities and authorization to service proprietary PARASIM systems. The deadline for submitting these capability statements is September 16, 2026, at 11:00 AM JST. The performance of this contract is slated for Kadena, Okinawa.

Department Of The Air Force

POSTED

DEADLINE

Pacific Floor Care-Floor Scrubbers/Vacuum COMBINED SYNOPSIS/SOLICITATION–FAR 19.502-2(a) SB SET-ASIDE -BRAND NAME

Solicitation # 36C24126Q0821

Solicitation 36C24126Q0821 is a brand-name request for quote issued by the Department of Veterans Affairs Network Contracting Office 1 to provide industrial-grade floor care equipment for the Manchester VA Medical Center. This procurement is a total small business set-aside under NAICS code 333310, specifically targeting the acquisition of Pacific Floor Care equipment to standardize cleaning operations in patient-care corridors and high-traffic areas. The required equipment includes two 28-inch disk scrubbers with lead-acid batteries, two QS-12 walk-behind scrubbers, and eight V15ED upright dual-motor vacuums. All units must be delivered fully assembled and tested, accompanied by necessary accessories such as pads, chargers, and safety labels, as well as required documentation including safety data sheets and battery maintenance guides. The contract is awarded to the responsible service-disabled veteran-owned small business that meets all technical specifications and offers the lowest evaluated price. Performance is structured across five tasks, with delivery required within 30 days of award, installation and training within 45 days, and final inspection and acceptance within 50 days. Acceptance is contingent upon successful functional tests and an operational simulation in a patient-area corridor. The equipment must adhere to Environmental Management Service cleanliness standards and include specific safety features such as BatteryShield motor-disable protection. Quotes are due by September 18, 2026, and must be submitted electronically to the designated contracting officials.

241-NETWORK Contract Office 01 (36C241)

POSTED

DEADLINE

45--HEATING ELEMENT,ELECTR

Solicitation # SPE7M2-26-T-6808

Solicitation SPE7M2-26-T-6808 is a Request for Quotations issued by the DLA Land and Maritime Nuclear Reactor Program for the procurement of six electrical immersion type heating elements, identified by NSN 4520015543418. The required items must match Parker Hannifin Corporation part number M3727-99 and are designated as critical application items. Quotes must be submitted electronically by September 21, 2026, under NAICS code 333310. The contract specifies a delivery period of 155 days with a required delivery date of July 24, 2027, and shipping terms as FOB Origin. Delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. The contractor is required to use the Wide Area WorkFlow system for all invoicing and receiving reports. Key regulatory compliance includes DFARS 252.204-7012 for cybersecurity safeguarding, adherence to the Hazard Communication Standard for any hazardous materials, and compliance with domestic material restrictions including the Buy American Act and Berry Amendment.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

46--FILTER ELEMENT,REVERSE

Solicitation # SPE8E8-26-Q-0488

Solicitation SPE8E8-26-Q-0488 is a Firm Fixed Price request for quotation issued by DLA Troop Support for the procurement of 67,000 boxes of Reverse Osmosis Filter Elements (NSN 4610-01-396-1460). This procurement is designated as a Critical Application Item and is set aside for small businesses under NAICS code 333310. Approved sources include Meissner Filtration Products Inc (P/N VM-77505) and Parker Hannifin Corporation (P/N 33-0005). Quotes must be submitted electronically via the DIBBS portal by September 20, 2026, and must remain valid for 90 days. The items are to be delivered to DLA Distribution Jacksonville within 30 days of award, with a material need ship date of December 9, 2026. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 palletization requirements. Inspection and acceptance will occur at the destination. Offerors proposing alternate parts must provide a complete data package for both approved and alternate parts for technical evaluation. Payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.

JACKSONVILLE BLDG

POSTED

DEADLINE

Supply/Install Trash Compactor System, NPS-CRLA

Solicitation # 140P8426Q0040

Pwr Pore Mabo (84000)

POSTED

DEADLINE

12--WORM SHAFT ASSEMBLY

Solicitation # SPE7M1-26-T-348R

Solicitation SPE7M1-26-T-348R, issued by the Defense Logistics Agency's Maritime Supply Chain on September 11, 2026, seeks quotes for the procurement of Worm Shaft Assemblies under NAICS code 333310. The requirement consists of two line items: 103 units of NSN 1240010460896 and one unit for First Article Testing. Delivery is required within 228 days after the award date to DLA Distribution Anniston, with shipping, inspection, and acceptance all designated as FOB Origin. Quotes must be submitted electronically via DIBBS by September 21, 2026. Technical compliance requires adherence to multiple reference drawings and the NASM16555 standard, with a mandatory manufacturer inspection system complying with ISO 9001:2015 or an equivalent. The contractor must test three units for First Article Testing, providing written notice to the Contracting Officer 14 days before shipment and submitting the final test report within 15 days of the contract date. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, respectively. The award process includes a price evaluation preference for SBA-certified HUBZone small businesses. Offers utilizing additive manufacturing are ineligible for award. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Compact Light Towers

Solicitation # 36C24126Q0776

The Department of Veterans Affairs, through the Network Contracting Office 01, is soliciting quotes for the purchase and delivery of four new compact mobile light towers for the Manchester VA Medical Center in New Hampshire. The required equipment must be Wacker Neuson Model LTT6 or an equal alternative, featuring LED fixtures, telescoping masts, and a programmable controller. Technical specifications include a minimum runtime of 173 hours on a full tank, maximum fuel consumption of 0.3 gallons per hour, and compliance with EPA Tier 4 Final emissions standards. The units will be used at Building 7 to support grounds maintenance, safety, and operational activities. This procurement is a total set-aside for small businesses under NAICS code 333310. Award decisions will be based on price, past performance, and speed of delivery. To be eligible, vendors must be located within 100 miles of the Manchester VA and capable of providing a two-hour emergency service response. Delivery must be completed within 30 days after receipt of order to the facility at 718 Smyth Road, Manchester, NH. All quotes must be submitted by September 21, 2026, at 10:00 AM EST, and must include the offeror's Unique Entity Identifier and a statement of agreement regarding the solicitation terms and conditions.

241-NETWORK Contract Office 01 (36C241)

POSTED

DEADLINE

Supply and Install Pot, Pan and Utensil Washer for KC VAMC (brand name or equal to Hobart PW20)

Solicitation # 36C25526Q0656

The Department of Veterans Affairs, through the Heartland Network 15 Contracting Office, is conducting market research via a Sources Sought Notice to identify qualified small businesses, including SDVOSBs, VOSBs, 8(a), and HUBZone firms, for the procurement of a commercial pot, pan, and utensil washer. The requirement is for a new OEM commercial flight-type dishwasher, specifically a Hobart PW20 or an approved equal, to be installed at the Kansas City VA Medical Center in Missouri. The anticipated scope of work includes the removal and disposal of existing equipment, delivery, installation, commissioning, and the provision of on-site operator training. The equipment must meet strict physical dimensions, NSF sanitation standards, and UL/cUL safety listings, with a required minimum one-year parts and labor warranty. The project requires the contractor to complete delivery and installation within 60 calendar days of the order, with a target need-by date of November 15, 2026. Technical performance criteria include specific sanitization temperatures, water usage limits, and functional throughput capacities. Contractors must provide proof of authorized reseller status to prevent the use of gray-market items and must comply with VA security, privacy, and safety protocols, including PIV badging and infection control risk assessments. Interested parties must submit their capabilities statements and relevant OEM authorizations to the designated point of contact by September 15, 2026. The government may use this information to determine if the final procurement will be set aside for specific small business categories under NAICS code 333310.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

SEAL ASSEMBLY KIT

Solicitation # 7017777381

This sources-sought notice issued by DLA Land and Maritime is for a Seal Assembly Kit under NSN 5330-014629466. The current approved source is Curtiss-Wright Electro-Mechanical Corp. Due to the AMC/AMSC designation of 3D, the item is typically procured from the actual manufacturer because the technical data required for competitive solicitation is not economically available or physically accessible. The agency is seeking additional qualified sources capable of manufacturing these items. Interested companies may submit information to Contract Specialist Amber Rohly by the response deadline of September 19, 2026. To become an approved source, applicants must submit a Source Approval Request package through the DLA Land and Maritime program to demonstrate that their product meets or exceeds the quality of the original equipment manufacturer.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

Supplier/Dealer of Steering Tie Rod Ends

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Manufacturer of Steering Tie Rod Ends

Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

DEADLINE

Supply of Insulating Compound Electrical (NSN 5970-002957658)

Nitrogenous Fertilizer Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M126U6073

DLA Land and Maritime is soliciting quotes for the procurement of 3,398 seals under NSN 5330014964243. This requirement may result in an Automated Indefinite Delivery Contract with a one-year term or a total value cap of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 509 units, with an estimated two orders per year. Delivery is required within 97 days after the order is placed, with shipments going to various CONUS and OCONUS DLA Depots. The approved source for this item is 5F573 233109509643891. This is an electronic RFQ under NAICS code 339991, and all quotes must be submitted electronically by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available. Interested parties should coordinate through the DLA Land and Maritime office in Columbus, Ohio.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

53--PACKING WITH RETAINER

Solicitation # SPE7LX26U002A

This procurement request from DLA Land and Maritime is for NSN 5330001438722 Packing with Retainer under solicitation SPE7LX26U002A. The requirement consists of an initial quantity of 76 units with a delivery window of 97 days after receipt of order. This is a source controlled drawing item, and the items must strictly adhere to the cited drawings and military specifications. Approved sources are limited to CAGE codes 07060 and 99193. The solicitation may result in an Indefinite Delivery Contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. There is a guaranteed minimum quantity of 11 units, with an estimated two orders per year. Shipping will be directed to various CONUS and OCONUS DLA Depots. This opportunity is a total set-aside for small businesses under NAICS code 339991, and all quotes must be submitted electronically by September 24, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

61--CABLE,POWER,ELECTRICAL

Solicitation # SPE7M226U0467

This procurement solicitation, issued by DLA Land and Maritime, is for the supply of electrical power cables under NSN 6145012035390. The requirement consists of an initial quantity of 572 feet, with a delivery window of 80 days after the order is received. This is a qualified products list item and is designated as a total small business set-aside under NAICS code 331318. The solicitation may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. While the estimated number of orders per year is two, the contract includes a guaranteed minimum quantity of 85 units. Shipments will be directed to various CONUS and OCONUS DLA depots. All quotes must be submitted electronically by the deadline of September 24, 2026.

Other Aluminum Rolling, Drawing, and Extruding

POSTED

DEADLINE

59--CUSHION,EAR

Solicitation # SPE7M126U6067

DLA Land and Maritime is soliciting quotes for the procurement of ear cushions under NSN 5965014857173. This is a total small business set-aside under NAICS code 334310, with an initial requirement of 279 units to be delivered within 83 days after the order is placed. The procurement may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 41 units and an estimated two orders per year, with shipments destined for various CONUS and OCONUS DLA depots. Approved sources for this requirement are identified as 1PNR4 40243G-02 and 1PNR4 40243G-07. All interested and responsible sources must submit their quotes electronically by the deadline of September 24, 2026. No hard copies of the solicitation, specifications, or drawings are available, and all submissions must be handled through the electronic portal.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

53--TRACK,SLIDING DOOR

Solicitation # SPE7L126U0721

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of sliding door tracks under NSN 5340015973964. This requirement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332722. The initial request is for 43 units with a delivery window of 133 days after the order is placed. Items are to be shipped to various CONUS and OCONUS DLA Depots. This procurement may result in an Automated Indefinite Delivery Contract with a one-year term or until a total value of 350,000.00 is reached. The contract anticipates approximately two orders per year with a guaranteed minimum quantity of six units. All quotes must be submitted electronically by the deadline of September 24, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

53--SPRING,HELICAL,COMPRES

Solicitation # SPE7L126U0720

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of helical compression springs under NSN 5360013853389. This request for quotation may result in an Automated Indefinite Delivery Contract with a term of one year or until a total expenditure of 350,000.00 is reached. The contract specifies a guaranteed minimum quantity of one unit, with an estimated one order per year. Delivery is required within 104 days after the order date to various CONUS and OCONUS DLA Depots. Approved sources for this procurement include 07309 112129029 and 07309 112159005. All responsible sources are invited to submit electronic quotes by the deadline of September 24, 2026. Specifications and drawings are not provided as separate documents, and the solicitation is available exclusively through the electronic link provided in the notice.

Spring Manufacturing

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M126U6071

DLA Land and Maritime is soliciting quotes for the procurement of 75 circuit card assemblies under NSN 5998014971477. This requirement may result in an automated Indefinite Delivery Contract with a one-year term or a total value cap of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 11 units, with an estimated two orders per year. Delivery is required within 160 days after the order is placed, with shipments going to various CONUS and OCONUS DLA Depots. The approved source for this item is 0KPC5 C98327-1. This is an RFQ process where all responsible sources may submit electronic quotes by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled electronically through the specified government channels.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX26U002B

DLA Land and Maritime is soliciting quotes for the procurement of butt hinges under NSN 5340016609476. This request for quote may result in an automated indefinite delivery contract with a one year term or until a total of 350,000.00 is reached. The initial requirement specifies a quantity of 48 units to be delivered within 116 days after the order is placed, with a guaranteed minimum quantity of 7 items. Shipments will be directed to various CONUS and OCONUS DLA depots. This opportunity is designated as a total small business set aside under NAICS code 332510. The approved source is identified as 94222 E6-10-420-50. All interested and responsible sources must submit their quotes electronically by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled through the specified electronic channels.

Hardware Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS