Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

26-58170 Mobile Command Centre (MCC) for the Centre for Autonomous Flight Systems (CAFS), Question and Answer #1

Open
26-58170International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The National Research Council of Canada is soliciting the procurement of one purpose-built Mobile Command Centre (MCC) for the Centre for Autonomous Flight Systems (CAFS) and the Drone and Flight Autonomy Laboratory. This self-contained vehicle will serve as a primary hub for ground control, telemetry, safety monitoring, and data recording for autonomous and remotely piloted aircraft systems. The MCC must support a wide range of aircraft and sensors, providing its own power supply, satellite connectivity, and climate control to operate in remote areas across Canada. It is designed to integrate with an existing ground-control trailer, requiring specific component commonality to ensure shared network and communication capabilities. The vehicle must be built on a Class 3 cutaway chassis with a minimum GVWR of 12,500 lb and a length of at least 25 feet. Key technical requirements include five interior workstations, a 55-inch IP56-rated exterior daylight-viewable display, dual heavy-duty alternators, and specialized RF exposure warning signage. The contract is awarded based on a weighted ratio of 20% technical merit and 80% price. All deliverables must be received by March 15, 2027, with final acceptance by March 31, 2027, following rigorous acceptance testing in Ottawa. The contractor is also required to provide training, maintenance, and annual inspections, while adhering to environmentally preferable packaging standards.

General Info

Procurement of a purpose-built Mobile Command Centre for autonomous flight systems research.

Documents

3
PDF, High priority: read this firstrfp
High
PDF, High priority: read this firstrfp
High
PDF, Low priorityq-and-a
Low

Read all 3 documents

Due in 22 days

Every page of every file, in your free workspace.

Read the documents

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 22 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 3 solicitation documentsRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
  • Buyer contactEmail and phone
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
Contacts1 person available
OfficeN/A

Full Description

Show more
26-58170 Mobile Command Centre (MCC) for the Centre for Autonomous Flight Systems (CAFS), Drone and Flight Autonomy Laboratory Question and Answer No.1 (Q & A #1) ALL OTHER TERMS AND CONDITIONS REMAIN THE SAME ________________________________________________________________________________________________________________________________________________________________________________ 26-58170 Mobile Command Centre (MCC) for the Centre for Autonomous Flight Systems (CAFS), Drone and Flight Autonomy Laboratory The National Research Council of Canada’s (NRC) Drone and Flight Autonomy Laboratory (DFAL) requires one (1) purpose-built Mobile Command Centre (MCC) for its Centre for Autonomous Flight Systems (CAFS), located at the Ottawa Airport adjacent to the NRC Flight Research Laboratory. The MCC is a self-contained vehicle that serves as the ground control, telemetry, safety-monitoring and data-recording facility for flight trials. It must support two lines of work: the flight autonomy and human factors research conducted at CAFS, and the Remotely Piloted Aircraft System (RPAS) operations of DFAL, at field sites across Canada. BACKGROUND: The Centre for Autonomous Flight Systems (CAFS) expands upon the existing capabilities of the NRC Flight Research Laboratory (FRL). It provides an advanced research infrastructure specifically engineered for the development, integration and evaluation of autonomous and optionally piloted aircraft systems. The facility aligns with Canada’s broader defence and aerospace modernization goals, working alongside the Department of National Defence and the Canadian Armed Forces to transition concepts into field-ready deployments. Flight trials of autonomous and remotely piloted aircraft require a ground facility for aircraft control, telemetry and video monitoring and recording, and surveillance of the surrounding airspace. The facility must also support coordination with the research team, air traffic services where available, and other aircraft as required. During flight autonomy and human factors trials, the operators themselves are also subjects of study. Every operator position must therefore be instrumented, and telemetry and video from multiple aircraft, together with operator actions and research logs, must be recorded using a common time base distributed throughout the vehicle network. This work currently relies on the NRC Flight Research Laboratory’s ground-control trailer, which was built for earlier programs. The trailer lacks sufficient seating for the crew required for multi-aircraft trials and has no provision for the masts, mast-head radios, radar and power demands of the current fleet. It also cannot provide the instrumented operator positions and synchronized data recording essential to these trials. The Mobile Command Centre (MCC) will become the primary ground facility, while the existing trailer will continue in a supporting role, towed by the MCC when required for a deployment. Some trials require the crew to be physically separated, with part of the team operating from the trailer and part from the MCC. The two facilities must therefore support a shared network, video feeds and intercom communications when deployed together. The DFAL fleet includes a wide range of aircraft and sensors with diverse ground-control and communications requirements. Ground-control systems range from handheld controllers operating in the standard 2.4 GHz and 5.8 GHz bands to laptop-based and self-contained ground stations connected to IP radios in the 900 MHz, 2.4 GHz, S-band and C-band ranges. Several systems use directional or phased-array ground antennas that must be elevated on masts, and several aircraft also carry onboard satellite links for over-the-horizon operation. Airspace situational awareness is provided by a ground-based detect-and-avoid radar, which must be mounted at height and present an air picture visible to the entire crew. Multi-aircraft trials require several ground stations to operate simultaneously from the same facility. Operations take place in all seasons, including at remote sites without reliable cellular coverage. The MCC must therefore provide its own power supply, satellite connectivity, heating and cooling. It must also be capable of reaching unpaved sites, including when towing the existing ground-control trailer. The MCC is intended to remain in service for many years, during which the fleet and research program may evolve. To support ongoing maintenance and future modifications, every installed system must be accessible, clearly labelled, documented and replaceable by NRC personnel. The MCC must incorporate specific components that match NRC’s existing equipment to ensure direct interoperability with the NRC Flight Research Laboratory’s ground-control trailer and NRC’s RPAS payloads. This component commonality is required so that the ground segment of the payload data links, the time reference, the recordings and the intercom are shared between the MCC and the trailer when the two facilities are deployed together. Given the custom nature of the build and the integration of NRC’s own equipment, the Offeror must have demonstrated experience in delivering vehicles of this type and in supporting them in service.

Similar Contracts

Same NAICS industry code

NAICS: 336211
New
DIBBS
GRILLE, METAL
Solicitation # SPE7L3-27-T-2680
Solicitation SPE7L3-27-T-2680 is a request for quotations issued by the Defense Logistics Agency Weapons Support for the procurement of 128 tan metal grilles, identified as commercial items under NSN 2510-01-434-7238. The requirement is designated as a Service-Disabled Veteran-Owned Small Business set-aside. Delivery is required within 180 days after award to the DLA Distribution New Cumberland facility, with a need ship date of February 26, 2027. The contractor must perform First Article Testing on three units within 60 days and retain these as production standards. Technical compliance requires adherence to TDP Rev C Gen 3 and specific reference drawings, with welding and casting processes meeting MIL-STD-248. The manufacturer must maintain a calibration system meeting ANSI/NCSL Z540-1-1994 or ISO 10012-1 and an inspection system complying with ISO 9001:2015. Final inspection and acceptance will occur at the manufacturing facility. Packaging must follow MIL-STD-2073-1E and special instruction AK14347238, utilizing double-walled fiberboard boxes with Styrofoam pads to immobilize the product. The contract includes strict regulatory requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls for technical data. Marking must follow MIL-STD-130N and MIL-STD-129. Offerors must submit quotes via DIBBS and comply with the Buy American Act and Berry Amendment. Payment will be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336211
New
DIBBS
BRACKET, ENGINE MOUNT
Solicitation # SPE7L3-27-T-2171
Solicitation SPE7L3-27-T-2171 is a small business set-aside issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of six engine mount and engine disconnect brackets (NSN 2510-01-291-5870). These components are designated as critical application items and must be manufactured in accordance with Basic Drawing NR 19207 12268421. The delivery is required 168 days after order, with a final ship date of May 4, 2027, delivered FOB Destination to Tracy, California. The contract strictly prohibits the use of additive manufacturing processes for these parts, and any offers utilizing such methods will be ineligible for award. Compliance requirements are extensive, including adherence to ISO 9001:2015 quality standards and a zero-non-conformance sampling plan for inspection at the point of origin. Technical data is subject to ITAR or EAR export controls, requiring offerors to maintain an approved US/Canada Joint Certification Program certification. Additionally, the contract mandates CMMC Level 2 cybersecurity standards and compliance with the Berry Amendment and Buy American Act. Packaging must follow ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Invoicing and payment must be processed through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS