Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

27-01 Marine Float Installs and Repairs

Active
BD-27-1293-MARB2-PROC2-131474State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Town of Marblehead is soliciting sealed bids for marine float installations and repairs, including launch and haul out services, under solicitation number BD-27-1293-MARB2-PROC2-131474. Bids must be submitted through the Town’s Procurement Portal by 3:00 PM on August 13, 2026, and are open to qualified vendors capable of performing the required work at Widger Road in Marblehead, Massachusetts. The contract is issued by the Town’s procurement office, with Allison Jenkins listed as the primary point of contact for inquiries. All work must be performed at the specified location, and bidders are expected to meet all technical and logistical requirements outlined in the solicitation. This procurement is classified under a State, Local, and Education (SLED) agency initiative and is intended to support the maintenance and operation of marine infrastructure critical to the town’s waterfront activities. There is no set-aside classification indicated, meaning all eligible businesses may submit bids without restriction. The solicitation was posted on July 22, 2026, giving potential bidders approximately five weeks to prepare and submit their proposals. Interested parties must access the official bid details via the provided Commbuys link, adhering strictly to the submission guidelines and deadlines to be considered for award.

General Info

Marblehead seeks bids for marine float repairs and launch services by August 13, 2026, at Widger Road.

Agency

Massachusetts → MARB2 - ProcurementView Agency

NAICS

336611 - Ship Building and RepairingView NAICS

Place of Performance

Widger Rd Marblehead, MA, 01945, US

Set-Aside

NONE

Documents

(2)

Town of Marblehead Float Repairs IFB 2026

DOCXifb

commbuys-source-page-BD-27-1293-MARB2-PROC2-131474.html

HTML

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyMassachusetts → MARB2 - Procurement
Contacts1 person available
OfficeWidger Rd Marblehead, MA, 01945, US
Organization / Agency
Massachusetts → MARB2 - Procurement
View Agency Profile
Office AddressWidger Rd Marblehead, MA, 01945, US
Contacts
Allison JenkinsPurchaser

Full Description

Show more
The Town of Marblehead invites sealed bids for Float Repairs, Launch and Haul Out Services . Bids will be received until August 13, 2026, at 10:00 AM via the Town's Procurement Portal https://procurement.opengov.com/portal/marblehead.

Similar Contracts

Same NAICS industry code

NAICS: 336611
New
DIBBS
BLADE SET, WINDSHIELThe contract is for a blade set for a windshield with NSN 2090-01-656-3527 and part number RC520918, under solicitation SPE7M4-26-T-273Z, requiring 30 units at a unit price of $30.00 for a total value of $900.00. Delivery is due within 20 days of award with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. The item must be shipped via the fastest traceable means, explicitly excluding parcel post, to the specified address in Baltimore, Maryland, and is to be palletized according to DLA packaging requirements. Technical and quality requirements are governed by the DLA Master List, with revisions controlled based on solicitation or award dates depending on acquisition size. The procurement is assigned to the Department of Defense’s Fluid Handling Division, with performance located in Baltimore, Maryland. The point of contact is Rory O’Reilly, reachable via phone and email provided. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and the original required delivery date is July 20, 2026. The NAICS code is 336611, indicating classification under motor vehicle body manufacturing. For government use only, additional identifiers include IPD 05, DIC A0A, and freight tracking code TCN ZZ521261962631. The supply is to be delivered under project TP 2 with supplier address code Z31800 and signature code B. The unit of issue is each (EA), aligned with ANSI X12 standards as referenced by DLA.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
Federal
GEAR MARINEThe vendor is required to deliver three specific marine components: five units of GEAR MARINE CB-ATON-M-18 and 24’ CB-ATON-L with part number 8866A63 from BOATSWAINS LOCKER, INC; ten units of MERCURY BRAVO 1-X STERNDRIVE (1.65:1 ratio) for 24’ ATON-L only with part number 5237300TP from MERCURY MARINE DIV OF; and ten units of TRANSOM, MAGNUM with superseded part number 62000025P from MERCURY MARINE DIV OF, all to be delivered on or before November 22, 2026. Each item must be individually packaged per MIL-STD-2073-1E standards, utilizing appropriate cushioning, blocking, and bracing to prevent movement and ensure protection during transit and storage. All packaging must be marked in compliance with MIL-STD-129R and include barcodes formatted to ISO/IEC 16388-2007 using Code 39 symbology, with clear labeling of the purchase order number, NSN, vendor name, and part number. The transom units require shipping in either ASTM-D6251 Type II Class 1 wood-cleated panel board or ASTM-D6880 Class 2 heavy-duty screwed wooden boxes. All deliveries must be made FOB destination to the United States Coast Guard at 2401 Hawkins Point Road, Building 88, Receiving Room, Baltimore, MD 21226, with shipments arriving exclusively Monday through Friday between 7:00 AM and 1:00 PM. Each shipment must include an itemized packaging list securely attached to the exterior. Total cost must include all freight and delivery charges. Invoices must be submitted exclusively through IPP.gov, including the CG purchase order number, vendor invoice number, CAGE code, PO item number, description, unit prices, extended totals, and a separate line item for shipping costs if over $100, accompanied by a separate freight invoice. The contract is a total small business set-aside under NAICS code 336611, subject to multiple FAR clauses concerning telecommunications, video surveillance equipment, Kaspersky Lab restrictions, and commercial product compliance. All substitutions require specification sheets for approval, and all
Sflc Procurement Branch 3(00040)

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
Federal
USCGC Hudson Winch and Weight Handling InspectionThis is a fixed-price, small business set-aside procurement under FAR Subpart 12.6, managed by the U.S. Coast Guard Base Miami Beach under the Department of Homeland Security, for the inspection and servicing of winch and weight handling equipment aboard the USCGC Hudson. The solicitation, numbered 52050PR260000308, utilizes simplified acquisition procedures and is restricted to small business concerns registered in SAM.gov with the applicable NAICS code 336611 for ship building and repairing. Offerors must submit a detailed price breakdown covering labor, materials, and equipment, with contract award based on best value consideration of cost, quality, past performance, and proposed resources. The work scope includes comprehensive inspections of hull fittings, crossdeck and spud winches, and boat davits, requiring adherence to SFLC Std Spec 0000 and 5000 standards, non-destructive evaluation methods, visual examinations, and submission of Condition Found and Condition Inspection Reports. Performance must occur onboard the USCGC Hudson at 100 MacArthur Causeway, Miami Beach, Florida, with work commencing no later than 20 days after award and conducted Monday through Friday from 6:30 AM to 3:00 PM, excluding holidays. All contractors must comply with strict base regulations, including U.S. citizenship or permanent residency requirements for personnel, submission of government-issued ID numbers, and acceptance of vehicle and equipment searches. A site visit is strongly encouraged on July 29, 2026, and technical inquiries should be directed to designated Coast Guard personnel. Proposals must be received by August 5, 2026, via email or physical delivery, and any modifications will be published on SAM.gov. Contract administration is governed by FAR clauses 52.212-1, 52.212-3, 52.212-4, 52.212-5, 52.222-41, and 52.222-90, along with HSAR clauses 3052.209-70 and 3052.237-72, and requires compliance with the Service Contract Act wage determinations and uniform maintenance reimbursement standards.
Base MIAMI(00028)

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336611
New
Federal
SLIDING DOORThe contract solicits ten sliding doors, part number 300X with NSN 2040-01-623-9122, manufactured exclusively by VIGOR KVICHAK LLC, as a sole-source procurement under a total small business set-aside for NAICS code 336611. These components are intended for installation on the forward section of a 32' TPSB vessel and must be installed without modifying existing framing holes, as bolt alignment is critical and no alternative equipment is permitted without formal approval via a submitted specification sheet. All items must be individually packaged in strict accordance with MIL-STD-2073-1E Method 10, using double-layer 3/4 inch bubble wrap and shipped in either an ASTM-D6251 Type III Class 1 wood-cleated panelboard or an ASTM-D6880 Class 2 heavy-duty screwed wooden box. Packaging must ensure protection against corrosion, deterioration, and physical damage throughout transit and storage. Each unit must be clearly marked with the Purchase Order Number, National Stock Number, vendor name, and part number in compliance with MIL-STD-129R and feature a Code 39 barcode per ISO/IEC-16388-2007. Delivery is strictly FOB destination to the U.S. Coast Guard’s Surface Forces Logistics Center at 2401 Hawkins Point Road, Building 88, Receiving Room, Baltimore, MD 21226, with shipments required between 7:00 AM and 1:00 PM Monday through Friday. An itemized packaging list must be securely attached to the exterior of each shipment, and the total delivery must be completed no later than August 10, 2027. All invoices must be processed exclusively through the Integrated Payment Portal, referencing the CG Purchase Order number, vendor invoice number, CAGE code, item description, unit pricing, and extended totals, with any freight charges of $100 or more requiring a separate freight invoice. The contract incorporates mandatory Federal Acquisition Regulation clauses prohibiting procurement of equipment from Kaspersky Lab and requiring representations regarding telecommunications and video surveillance services, while also enforcing commercial item procurement rules under FAR Part 12. The procurement is administratively managed by Yannick Kassi, who must be notified of any delivery updates or changes by August 4, 2026, with technical approvals coordinated through Ch
Sflc Procurement Branch 3(00040)

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336611
New
Federal
FEEDBACK UNITThe U.S. Coast Guard, through the Surface Forces Logistics Center in Baltimore, Maryland, is procuring 30 FEEDBACK UNITS (Part Number 8748-050-OAE, NSN 5998-99-317-5395) exclusively from ULTRA DYNAMICS LTD under a sole-source, small business set-aside acquisition. This purchase is justified due to the proprietary nature of the item, with no technically equivalent alternatives available, and failure to procure the exact part could result in significant mission degradation. All units must be delivered on or before August 15, 2026, to the designated receiving facility at 2401 Hawkins Point Road, Baltimore, MD 21226, with shipments permitted only between 7:00 AM and 1:00 PM on weekdays. The contract mandates FOB DESTINATION shipping terms, meaning the vendor bears all transportation risks and costs, which must be included in the total price. Packaging must strictly adhere to MIL-STD-2073-1E, Method 10, ensuring adequate cushioning, blocking, and bracing to prevent damage from corrosion, deterioration, or physical stress during transit and storage. Each item must be individually packaged but may be shipped in a multipack container. All external markings must comply with MIL-STD-129R, clearly displaying the purchase order number, national stock number, vendor name, and part number, along with barcodes formatted to ISO/IEC-16388-2007 using Code 39 symbology. An itemized packaging list must be physically attached to the outside of each shipment. All invoicing must be submitted exclusively through the Internet Procurement Portal (IPP.gov), with invoices requiring the CG purchase order number, vendor invoice number, CAGE code, PO item number, item description, unit prices, and extended totals; freight charges over $100 must be submitted as a separate freight invoice. The vendor is required to notify Yannick Kassi at Yannick.a.kassi@uscg.mil of all quotes, delivery changes, and tracking information no later than August 3, 2026. The contract incorporates multiple Federal Acquisition Regulation clauses governing cybersecurity and telecommunications compliance, including prohibitions on using equipment or services from Kaspersky Lab, Huawei, ZTE, or other covered entities, as well as representations regarding telecommunications and video surveillance equipment
Sflc Procurement Branch 3(00040)

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
International
D-1, D-4 and D-45 Vessel Replacement Works Turnaround 2026The Contractor is responsible for supplying all manpower, equipment, tools, transportation, materials, and supervision necessary to replace three vessels—D-1, D-4, and D-45—at Petrojam Limited’s refinery in Kingston, Jamaica, as part of the 2026 Turnaround. All work must be completed within twenty days of the refinery’s planned shutdown, during which operations are halted and time windows for work are severely restricted. The scope includes complete removal and installation of the vessels alongside the disassembly and reassembly of connected piping, platforms, and instruments. The Contractor must plan and budget for extended work hours, including night shifts and weekend operations, to meet the tight timeline. All items not explicitly identified as Owner-furnished are to be provided by the Contractor. The solicitation for this work, identified as 1104/3300, was posted by Petrojam Limited under the Government of Jamaica and is open for bids with a deadline of August 12, 2026. The project is classified as a solicitation with no specific set-aside, and performance will occur exclusively at the refinery site in Jamaica. Bidders are expected to carefully assess the logistical challenges posed by the shutdown window and incorporate all required resources, labor schedules, and contingency plans into their proposals. The location and compressed timeframe demand meticulous planning and execution to ensure compliance with the contractual obligations and safety standards.
Petrojam Limited

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 336611
New
DIBBS
STUFFING TUBEThe contract is for one stuffing tube with NSN 5975-00-881-8252 and part number MS24235/1-001SYM2405, issued under solicitation SPE4A7-26-T-588X. The item must comply with all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise stated, and attributes must be verified at levels VII, IV, and II for critical, major, and minor characteristics respectively. The product must be marked and identified per MIL-S-24235/1F and MIL-S-24235C Sup 1, with physical identification in accordance with RQ017. Packaging must adhere to DLA’s packaging requirements, including MIL-STD-129 for labeling and RP001 for palletization; non-hazardous items must be commercially packaged to ASTM D3951, but only if not overridden by DLA technical requirements. Hazardous materials must meet TQ requirement IP025. Delivery is FOB origin with a 206-day lead time, and the item must be delivered by February 21, 2027. Inspection and acceptance occur at the destination. The sole quantity is one unit, with no variance allowed. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions follow DLAD Proc Notes C19 and C20. The contract was posted on July 21, 2026, with responses due by July 29, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Massachusetts → MARB2 - Procurement

Same awarding agency