Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

28--SPACER,TURBINE FRON

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This predicted recompete opportunity involves the procurement of turbine front spacers for DLA Aviation under the Department of Defense. The current contract, SPE4A125P0834, is held by Union Machine Company of Lynn, Inc., with a total value of 62,211.24 dollars. The existing agreement is structured as a firm fixed price contract and is expected to end on November 23, 2026. The opportunity is classified as likely for recompete with a medium confidence level of 55 percent. It falls under NAICS code 336412 and was previously competed under SAP. The primary point of contact for this requirement is Dustin Smith, and the procurement is managed through the DLA Aviation office located in Richmond, Virginia.

General Info

DLA Aviation turbine front spacer recompete, firm fixed price, ending November 23 2026.

Agency

Department Of Defense → DLA Aviation

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

VA, 018341564, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMay 23

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / AgencyDepartment Of Defense → DLA Aviation

Office AddressRICHMOND, VA, 23237, USA

Contacts

Dustin Smith

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: SPE4A125P0834 Incumbent: UNION MACHINE COMPANY OF LYNN, INC Contract Value: $62,211.24 Potential End Date: 2026-11-23T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 55/100)

Similar Contracts

Same NAICS industry code

Manufacturing of Seal Retaining Plates (P/N 3014893)This subcontract involves the manufacturing of four precision-machined seal retaining plates for aircraft engine projects under the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for fabricating the plates according to Pratt & Whitney Canada Corp P/N 3014893 specifications, utilizing specialized precision machining equipment suitable for critical application items. Strict quality assurance and inspection protocols must be followed, adhering to MIL-STD-1916, ASQ H1331, and MIL-STD-105/ASQ Z1.4 standards. Additionally, the provider must ensure full compliance with DFARS 252.225-7001 regulations. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

Oil Pressure Cover SupplyThis subcontract through the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division involves the manufacture or sourcing of six oil pressure covers under NSN 2840-01-029-5266. The selected provider will supply these components to prime contractors, ensuring all units meet strict quality standards. Compliance requires the use of MIL-STD-1916 for quality inspections and MIL-STD-105/ASQ Z1.4 for determining sample lot sizes, with a mandate for zero non-conformance acceptance. Eligible bidders must possess a valid UEI and CAGE code to participate in this procurement effort.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

Heatshield Stiffener Fabrication (NSN 2835-01-324-4956)This subcontract involves the fabrication of 90 heatshield stiffeners for non-aircraft gas turbines to support DLA supply contracts. The manufacturer must produce the units in strict accordance with Basic Drawing NR 53711 5750011 Rev G and Reference Drawing NR 53711 0900-LP-060-4010 Rev 2. All finished and inspected stiffeners must be delivered according to MIL-STD-1916 standards, and the use of additive manufacturing is explicitly prohibited. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. The project falls under NAICS code 336412 and is managed by the DLA Weapons Support ASC Commodities Division within the Department of Defense. Performance for this contract is located in Tracy, California, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Precision Sheet Metal Fabrication - Engine Shroud AssemblyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, involves the precision fabrication of Engine Shroud Assemblies for prime contractors. The scope of work requires specialized sheet metal fabrication adhering to MA-122, surface texture finishing per ASME B46.1, and marking in accordance with MIL-STD-130. To successfully execute the contract, the provider must utilize precision forming equipment and surface texture verification tools to deliver completed assemblies and First Article units. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336412. Strict compliance standards are mandatory, including the maintenance of CMMC Level 2 certification and adherence to Northrop Grumman Licensing Agreements. Interested parties must respond by November 3, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

First Article Testing and Certification for Aircraft Connector AssembliesThis HUBZone set-aside subcontract, issued by the DLA Weapons Support Fluid Handling Division, involves First Article Testing and Certification for aircraft connector assemblies, specifically for NSN 1710-00-831-6821. The selected contractor will support prime contractors by executing FAT protocols, performing detailed measurements and inspections, and generating formal validation reports to verify manufacturing processes. Performance of these services requires the use of certified metrology equipment and CSI-standard testing capabilities. The project is based in New Cumberland, Pennsylvania, and requires the delivery of one tested unit along with a comprehensive FAT report. Interested parties must respond by November 9, 2026, under NAICS code 336412.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Exhaust Gas Oxygen Emission Control SensorsThis small business set-aside subcontract involves the fabrication and assembly of six exhaust gas oxygen emission control sensors for the Department of Defense under DLA Weapons Support Land Supplier Operations Engines. The contractor must build the units in strict accordance with TDP Rev A Gen 3 and Basic Drawing NR 53711 8599721, while ensuring full compliance with MIL-STD-2073-1E packaging standards and NAVSEA 5100-003D mercury containment protocols. Due to the handling of ITAR and EAR data, the successful bidder is required to maintain CMMC Level 2 and JCP certifications. Performance for this project will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 19 hours ago

DEADLINE

Aircraft Compressor Blade Set FabricationThis subcontract involves the fabrication of 10 complete aircraft compressor blade sets under NSN 2840-00-176-3758 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division. The project requires the use of precision CNC machining and aerospace-grade alloys to manufacture blades that adhere strictly to technical drawings and quality standards for Critical Safety Items. To be eligible, the manufacturer must hold both SAE AS9100 quality management system certification and specific CSI certification. The contract falls under NAICS code 336412, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

Supply of Oil Transfer Assembly (NSN 2010012532060)This subcontract involves the manufacture or sourcing of three Oil Transfer Assemblies under NSN 2010012532060 for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for ensuring all assemblies meet strict technical specifications and adhere to the Buy American Act and Berry Amendment requirements. Operational requirements include specific packaging, marking, and palletizing standards according to MIL-STD-2073-1E, MIL-STD-129, and RP001. The work is associated with NAICS code 336412 and will be performed in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

Manufacture and Supply of Aircraft Gas Turbine Engine Exhaust DuctThis subcontract involves the manufacture and supply of one Aircraft Gas Turbine Engine Exhaust Duct for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The contractor is responsible for fabricating the duct using high-temperature alloys to strict aerospace tolerances, ensuring IUID marking complies with MIL-STD-130, and conducting quality assurance testing in accordance with MIL-STD-1916 or ASQ H1331. The project requires a CMMC Level 2 Self-Assessment for security compliance and specifies delivery as FOB Origin. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336412. The response deadline for this requirement is November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

Supply of SARC (NSN 1440016579543)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the fabrication or sourcing of 2,000 SARC components meeting NSN 1440016579543 specifications. The selected provider must apply Item Unique Identification via laser etching in accordance with MIL-STD-130 and ensure all items are packaged according to RP001 standards. The opportunity is a total small business set-aside under NAICS code 336412, with performance located in New Cumberland. To be eligible, contractors must maintain ISO 9001:2015 certification and ensure full compliance with DFARS 252.211-7003. Responses are due by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Supply of Valve Gate Shafts (P/N 111390)This subcontract involves the supply of two Valve Gate Shafts, part number 111390, for prime contractors supporting Department of Defense aircraft component procurements. These components are designated as Critical Application Items and must be delivered FOB Origin. The contract is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in New Cumberland. The supplier is required to adhere to strict regulatory and technical standards, including MIL-STD-129 for marking and shipment. Additionally, the provider must maintain compliance with DFARS 252.204-7012 and NIST SP 800-171 security requirements. The procurement falls under NAICS code 336412.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

Supply of Fluid Filter Elements (NSN 2915-00-511-1364)This subcontract involves the supply of fluid filter elements, specifically item NSN 2915005111364, to prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring that all items undergo sampling in accordance with MIL-STD-1916 or ASQ H133 standards. Final delivery of the physical elements must be made to the designated DLA location at Moody Air Force Base by the required delivery date. Logistical requirements mandate that shipments be sent via the fastest traceable means available, with a specific prohibition against using parcel post. The contract falls under NAICS code 336412 and is managed through the DLA Weapons Support agency. Interested parties should note the response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

Aviation Controller Inspection and Functional TestingThe Aviation Controller Inspection and Functional Testing subcontract involves providing independent inspection and functional testing services for prime contractors supporting DLA Aviation projects. The scope of work includes conducting environmental stress screening, functional input/output testing, and final quality inspections. These tasks require the use of specialized equipment such as signal generators, oscilloscopes, and environmental chambers to ensure all units meet strict performance standards. Compliance is mandatory with AS9100 and MIL-STD testing protocols to maintain aviation quality and safety. The selected provider is responsible for delivering comprehensive certified test reports and detailed inspection logs for every unit processed. This opportunity falls under NAICS code 541380 and is managed through the Department of Defense.

Testing Laboratories and Services

POSTED

about 24 hours ago

DEADLINE

Aerospace Component Supply (Switches, Joysticks, Sensors)This subcontract under DLA Aviation involves the supply of high-reliability aerospace components, specifically switches, sensors, and interactive input devices, to prime contractors. The scope of work focuses on the procurement of individual component parts, including tactile sensors and aerospace-grade potentiometers, with a particular emphasis on managing long-lead time items and addressing diminishing manufacturing sources to maintain a steady supply chain. To ensure compliance with Department of Defense standards, the provider must maintain full traceability documentation and provide Certificates of Conformance for all delivered parts. The contract falls under NAICS code 423850 and is dedicated to supporting critical aviation infrastructure through the delivery of specialized hardware.

Service Establishment Equipment and Supplies Merchant Wholesalers

POSTED

about 24 hours ago

DEADLINE

Hand Controller Housing and Mechanical Chassis FabricationThis subcontract for DLA Aviation involves the fabrication of hand controller housings and mechanical chassis, specifically focusing on external casings, ergonomic grips, and internal chassis for prime contractors. The scope of work requires CNC machining, including milling, turning, and finishing of high-strength polymers or aerospace-grade metals, adhering strictly to specifications provided by Mason Electric or Rockwell Collins. Qualified providers must possess the necessary CNC mills and lathes and maintain AS9100 or ISO 9001 certification to ensure aerospace quality standards. The final deliverables consist of finished mechanical housings and chassis, with the solicitation posted on October 28, 2026, and a response deadline of October 30, 2026.

POSTED

about 24 hours ago

DEADLINE

Interactive Hand Controller PCB and Electronics AssemblyThe Interactive Hand Controller PCB and Electronics Assembly subcontract involves the manufacture and assembly of internal printed circuit boards and electronic circuitry for prime contractors supporting DLA Aviation projects. The scope of work encompasses PCB layout, fabrication, surface mount technology assembly, and the soldering of internal circuitry in strict accordance with aviation standards. The final deliverable consists of completed and fully tested electronic circuit assemblies. To qualify for this engagement, providers must possess specialized PCB fabrication equipment and SMT machines. Mandatory certifications include AS9100 and IPC-A-610 to ensure compliance with aerospace quality and reliability requirements. This opportunity falls under NAICS code 334418 and is managed under the Department of Defense.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 24 hours ago

DEADLINE

CONTROLLER,HAND,INTERACTIVE

Solicitation # SPE4A727R0099

The Defense Logistics Agency Aviation is conducting market research through a sources sought notice for the new manufacture of the Interactive Hand Controller, identified by NSN 5895-015052115. The requirement is for a minimum of 17 and a maximum of 67 units, with approved part numbers including 218-1239-010 from Rockwell Collins, 6100-1001-01 from ATI Engineering Services, and 730-4413 from Mason Electric Co. The scope of work encompasses the entire production lifecycle, including the procurement of component parts, inspection, testing, preservation, packaging, and shipping. Additionally, the selected provider may be responsible for supply chain management, logistics planning, and addressing diminishing manufacturing sources and material shortages. This effort is categorized under NAICS code 336411. While there is no formal solicitation at this time, the government is evaluating potential market capacity to determine if the requirement will be set aside for small businesses or pursued through full and open competition. Interested parties must submit their organization details and tailored capability statements to Montana Kipp by October 30, 2026. Evaluation will focus on the provider's ability to secure necessary financial and technical resources and implement a project management plan that ensures cost containment, schedule compliance, and risk mitigation.

Aircraft Manufacturing

POSTED

about 24 hours ago

DEADLINE

CASE,OPTICAL INSTRUMENT

Solicitation # SPE4A727R0097

DLA Aviation is soliciting quotes for an unrestricted Indefinite Quantity Contract (IQC) with a five year base period for the manufacture of Optical Instrument Cases, NSN 5855-01-609-6252, Part Number OFM-2054-A1. The requirement includes the procurement of component parts, inspection, testing, packaging, and shipping. The estimated annual demand is 305 units, with a minimum delivery order quantity of 76 units and a maximum of 305 units. Delivery is required within 120 days after receipt of order, with inspection and acceptance occurring at the destination and shipping terms set as FOB Origin. The solicitation is scheduled to be issued on November 13, 2026, and will close on December 12, 14, 2026, with offers submitted in writing via the DLA Internet Bid Board System. Award decisions will be based on an equal weighting of price, past performance, and delivery, and the Supplier Performance Risk System will be applied. Prospective suppliers must be registered in the System for Award Management. While EEO clearance is not required and progress payments are not authorized, certified cost and pricing data may be requested.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 24 hours ago

DEADLINE

NSN 6220-01-434-1886 - LIGHT ASSEMBLY, INDICATOR

Solicitation # SPE4A6-27-R-0077

This indefinite quantity contract, issued by DLA Aviation, is for the procurement of 54 indicator light assemblies for use in F-16 aircraft. The requirement specifies Luminescent Systems, Inc. part number 89-00173-001 as an approved source. The contract features a five-year base period without additional options, with pricing evaluated based on an estimated annual demand of 54 units. Delivery is set as FOB Origin to various facilities within the Continental United States, with a required delivery schedule of 191 days after receipt of order. The solicitation is unrestricted and will be available via DIBBS around November 13, 2026, with a response deadline of December 14, 2026. Prospective offerors must submit a completed physical solicitation package, as electronic offers are not acceptable. While the total value is not expected to exceed the TINA threshold, contractors should be prepared to provide certified cost and pricing data if requested.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

in about 2 months

AIRCRAFT, STRATOLIFTER, C/KC-135; IGNITER, SPARK, A/C HEATER

Solicitation # SPE4A727R0074

Aircraft Manufacturing

POSTED

about 24 hours ago

DEADLINE

WASHER,FLAT - 40A /HELICOPTER, BLACK HAWK UH-60A, UH-60L, HH/UH-60M, UH-60V

Solicitation # SPE4A627R0086

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 24 hours ago

DEADLINE

in about 1 month

NSN 6150-21-920-2797 - CABLE ASSEMBLY, SPECIAL ELECTRI

Solicitation # SPE4A6-27-R-0079

This indefinite quantity contract, issued by DLA Aviation, is for the procurement of 28 special purpose electrical cable assemblies used in Aircraft Launch and Recovery Equipment. The requirement specifies Idal Technologies Inc. as an approved source for part number 6537C026-2. The contract features a five-year base period without additional options, with pricing evaluated based on an estimated annual demand of 28 units. Delivery is set as FOB Origin with a required delivery schedule of 422 days after receipt of order to various facilities within the Continental United States. While the total value is not expected to exceed the TINA threshold, offerors should be prepared to provide certified cost and pricing data. Electronic offers are not acceptable, and completed solicitation packages must be submitted. The solicitation is expected to be issued around November 13, 2026, with a response deadline of December 14, 2026.

Other Electronic Component Manufacturing

POSTED

about 24 hours ago

DEADLINE

in about 2 months

Annual Synopsis Boeing

Solicitation # Annual_Review_SPE4A1_25G0004_25G0007

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

AIRCRAFT, STRATOFORTRESS, B-52; SUPPORT, ENGINE MOUNT

Solicitation # SPE4A727R0073

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

in about 2 months

Earlier notices in this NAICS code

Posted before this notice, open and closed

28--SEAL,METALLIC,AIRCR

Solicitation # SPE4A725T2564

POSTED

over 1 year ago

CLOSED

over 1 year ago

ENGINE ACCESSORY UN

Solicitation # SPRPA125QES29

Pa DLA Aviation At Philadelphia

POSTED

over 1 year ago

CLOSED

over 1 year ago

30--WEIGHT,COUNTERBALAN

Solicitation # SPE7LX25U6302

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

28--COUPLING,TORQUEMETER

Solicitation # SPE4A6-25-T-349X

Defense Logistics Agency

POSTED

over 1 year ago

CLOSED

over 1 year ago

29--HOSE ASSY,MANIFOLD

Solicitation # SPE4A7-25-T-053K

Defense Logistics Agency

POSTED

over 1 year ago

CLOSED

over 1 year ago

29--SHAFT,ROTOR PINION

Solicitation # SPE7M425T135X

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

ENGINE ACCESSORY UN

Solicitation # SPRPA125RES42

Pa DLA Aviation At Philadelphia

POSTED

over 1 year ago

CLOSED

over 1 year ago

STARTER,ENGINE,AIR

Solicitation # N0038325RH208

Navsup Weapon Systems Support

POSTED

over 1 year ago

CLOSED

over 1 year ago

NSN2840-01-224-4243_SupportTurbine_F108_PN9529M97G15_FD2030-25-01680

Solicitation # SPRTA1-25-R-0246

Ok DLA Aviation At Oklahoma City

POSTED

over 1 year ago

CLOSED

over 1 year ago

NSN: 3110-01-278-2945OK, P/N: 6051T94P01 Bearing, Roller, Cyli

Solicitation # SPTRA125Q0041

Ok DLA Aviation At Oklahoma City

POSTED

over 1 year ago

CLOSED

over 1 year ago

29--VALVE,FUEL PRESSURI

Solicitation # SPE4A725T428X

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE4A125T4730

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS