Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing and Certification for Aircraft Connector Assemblies

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This HUBZone set-aside subcontract, issued by the DLA Weapons Support Fluid Handling Division, involves First Article Testing and Certification for aircraft connector assemblies, specifically for NSN 1710-00-831-6821. The selected contractor will support prime contractors by executing FAT protocols, performing detailed measurements and inspections, and generating formal validation reports to verify manufacturing processes. Performance of these services requires the use of certified metrology equipment and CSI-standard testing capabilities. The project is based in New Cumberland, Pennsylvania, and requires the delivery of one tested unit along with a comprehensive FAT report. Interested parties must respond by November 9, 2026, under NAICS code 336412.

General Info

HUBZone subcontract for aircraft connector testing and certification in New Cumberland, Pennsylvania.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

HZC

Documents

This scope was carved out of SPE7M4-27-T-1940.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONNECTOR ASSEMBLY, AIR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors on DLA Weapons Support projects to validate manufacturing processes for NSN 1710-00-831-6821. Executes FAT protocols, performs detailed measurement and inspection, and generates formal validation reports. Requires certified metrology equipment and CSI-standard testing capabilities. Delivers one tested unit and a comprehensive FAT report.

Similar Contracts

Same NAICS industry code

Manufacturing of Seal Retaining Plates (P/N 3014893)This subcontract involves the manufacturing of four precision-machined seal retaining plates for aircraft engine projects under the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for fabricating the plates according to Pratt & Whitney Canada Corp P/N 3014893 specifications, utilizing specialized precision machining equipment suitable for critical application items. Strict quality assurance and inspection protocols must be followed, adhering to MIL-STD-1916, ASQ H1331, and MIL-STD-105/ASQ Z1.4 standards. Additionally, the provider must ensure full compliance with DFARS 252.225-7001 regulations. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Oil Pressure Cover SupplyThis subcontract through the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division involves the manufacture or sourcing of six oil pressure covers under NSN 2840-01-029-5266. The selected provider will supply these components to prime contractors, ensuring all units meet strict quality standards. Compliance requires the use of MIL-STD-1916 for quality inspections and MIL-STD-105/ASQ Z1.4 for determining sample lot sizes, with a mandate for zero non-conformance acceptance. Eligible bidders must possess a valid UEI and CAGE code to participate in this procurement effort.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Precision Sheet Metal Fabrication - Engine Shroud AssemblyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, involves the precision fabrication of Engine Shroud Assemblies for prime contractors. The scope of work requires specialized sheet metal fabrication adhering to MA-122, surface texture finishing per ASME B46.1, and marking in accordance with MIL-STD-130. To successfully execute the contract, the provider must utilize precision forming equipment and surface texture verification tools to deliver completed assemblies and First Article units. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336412. Strict compliance standards are mandatory, including the maintenance of CMMC Level 2 certification and adherence to Northrop Grumman Licensing Agreements. Interested parties must respond by November 3, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Aircraft Compressor Blade Set FabricationThis subcontract involves the fabrication of 10 complete aircraft compressor blade sets under NSN 2840-00-176-3758 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division. The project requires the use of precision CNC machining and aerospace-grade alloys to manufacture blades that adhere strictly to technical drawings and quality standards for Critical Safety Items. To be eligible, the manufacturer must hold both SAE AS9100 quality management system certification and specific CSI certification. The contract falls under NAICS code 336412, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE4A5-27-T-2020

Solicitation SPE4A5-27-T-2020 is issued by the DLA Weapons Support ASC Supplier OEM Division for the procurement of four special bands, identified by NSN 2840-01-036-1322 and part number 3023698 from Pratt & Whitney Canada Corp. The required delivery date is October 26, 2026, with a delivery lead time of 20 days after receipt of order. The items are to be shipped FOB Origin to a consignee located in Guvercinlik, Turkey, utilizing A.J. Worldwide Services as the freight forwarder. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance requires sampling per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program, DFARS cybersecurity reporting standards, and hazardous material labeling per 29 CFR 1910.1200. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

RETAINER, SPRING, VALVE

Solicitation # SPE4A1-27-T-0221

Solicitation SPE4A1-27-T-0221 is a fixed-price procurement issued by the DLA Weapons Support Aviation Supply Chain for four units of Valve Spring Retainers, identified by NSN 2995011668338 and Meggitt North Hollywood Inc part number 229651. The contract requires delivery to the DLA Distribution Depot Oklahoma at Tinker AFB, with a need ship date of March 8, 2027, and an original required delivery date of March 19, 2027. Delivery is FOB Origin, and both inspection and acceptance are to be conducted at the origin. The procurement is subject to rigorous quality and technical standards, including CMMC Level 2 self-assessment and various DLA master list requirements such as configuration change management and tailored higher-level quality requirements. Sampling must adhere to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for MIL-STD-105/ASQ Z1.4. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE4A5-27-T-2023

Solicitation SPE4A5-27-T-2023 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of four special bands. The items are identified by NSN 2840010295271 and Pratt & Whitney Canada Corp part number 3023697. The contract specifies delivery within 20 days after receipt of order, with terms set as FOB Origin. Inspection and acceptance will also occur at the origin. The shipping destination is located in Guvercinlik, Turkey, with logistics coordinated through A.J. Worldwide Services. The procurement is subject to rigorous quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance under MIL-STD-105/ASQ Z1.4. Item Unique Identification is not required. The solicitation incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity assessments. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the use of additive manufacturing is prohibited unless specifically authorized. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

BLADE SET, COMPRESSO

Solicitation # SPE4A5-27-T-2040

Solicitation SPE4A5-27-T-2040 is a procurement request from the DLA Weapons Support ASC Supplier Oper OEM Division for 10 aircraft compressor blade sets, identified by NSN 2840-00-176-3758. This is an Air Force designated Critical Safety Item (CSI) and a Foreign Military Sales (FMS) requirement for the Royal Jordanian Air Force. The procurement is governed by NAICS code 336412 and requires adherence to specific technical drawings and quality assurance plans, including SAE AS9100 higher-level quality requirements. Delivery is specified as 20 days after receipt of order, with inspection occurring at the origin and acceptance at the destination. Offerors must comply with strict domestic material restrictions, including the Berry Amendment and the Buy American Act, and provide disclosure for any non-domestic materials. The contract mandates the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and requires registration via the Account Management and Provisioning System (AMPS) for Vendor Shipment Module (VSM) access. Key regulatory compliance includes DFARS 252.204-7012 for safeguarding covered defense information and prohibitions against covered telecommunications equipment. Packaging and marking must strictly follow MIL-STD-129 and MIL-STD-2073-1E standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

SHROUD ASSEMBLY, ENGINE

Solicitation # SPE4A7-27-R-X125

Solicitation SPE4A7-27-R-X125 is a fixed-price procurement issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the supply of Engine Shroud Assemblies (NSN 1560-007683121). Designated as a critical application item, the procurement is intended to provide worldwide support over a five-year term or until an aggregate total of 350,000 dollars is reached. The initial base year includes a guaranteed minimum quantity of 14 units, with a maximum delivery order of 28 units. This is not a small business set-aside, and awardees must be registered in the System for Award Management (SAM). Technical requirements mandate strict adherence to MIL-STD-130 for marking and identification, MA-122 for sheet metal fabrication, and ASME B46.1 for surface texture. The contractor must provide first article units for approval testing within 30 days of award, with the government adding the cost of this testing to the evaluated price. Due to the nature of the item, a Northrop Grumman Licensing Agreement applies, requiring strict data non-disclosure and destruction protocols. Additionally, contractors must meet Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements and provide unique identifiers issued by SPRS. Inspection and acceptance are generally conducted at the source, though first article testing is accepted at the destination. Invoicing and payment are processed electronically through the Wide Area WorkFlow (WAWF) system. Evaluation for award is based on technical acceptability, price relative to estimated annual demand, and the cost of government first article testing. Offers for surplus material are explicitly excluded from consideration.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE4A5-27-T-2055

Solicitation SPE4A5-27-T-2055, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is a request for quotations for the procurement of 131 units of Valve Lanyards (NSN 2995-01-166-4158). This critical application item is identified as a commercial product and must be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The required delivery date is July 4, 2027, with a need ship date of March 14, 2027, and a delivery window of 128 days after order. The contract mandates strict quality and technical compliance, including adherence to the DLA Master List of Technical and Quality Requirements and a manufacturer inspection system complying with SAE AS9003 or ISO 9001. Key requirements include CMMC Level 2 Self-Assessment, MIL-STD-129 marking, and MIL-STD-2073-1E packaging. Inspection and acceptance will occur at the point of origin. Payment and invoicing must be processed electronically through the Wide Area Workflow system. Offerors must submit their quotations by November 5, 2026, and comply with the Buy American Act and other domestic material restrictions.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

DUCT, EXHAUST, AIRCRAFT

Solicitation # SPE4A5-27-T-2060

Solicitation SPE4A5-27-T-2060 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of one aircraft gas turbine engine exhaust duct, identified by NSN 2840016038681 and part number 555-1555-501. The contract specifies a delivery timeframe of 514 days after order, with an original required delivery date of October 31, 2027, and a need ship date of April 3, 2028. Delivery is FOB Origin, while inspection and acceptance are conducted at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict quality and technical standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-130 for Item Unique Identification. Quality assurance is governed by MIL-STD-1916 and MIL-STD-105/ASQ Z1.4, requiring zero non-conformances in sample lots. Key regulatory requirements include CMMC Level 2 Self-Assessment, compliance with the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing. The solicitation is categorized under NAICS code 336412, and quotations were due by November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-7370

Solicitation SPE4A6-27-T-7370 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 58 units of Cover, Pivot (NSN 2915012188075). This item is designated as an Air Force critical safety and critical application item, requiring manufacture according to Drawing 2671270 Rev G. The contract mandates strict quality and inspection standards, including compliance with SAE AS9003 or ISO 9001, and utilizes sampling methods per MIL-STD-1916 or ASQ H1331. Inspection and acceptance are both set at the point of origin. Delivery is required within 179 days of award, with an original required delivery date of January 19, 2027, shipped FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, though Item Unique Identification is not required. The procurement includes significant regulatory requirements, such as CMMC Level 2 self-assessment, safeguarding of covered defense information per DFARS 252.204-7012, and adherence to the Buy American Act. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Supply of Nonmetallic Tubing (NSN 4710-01-662-6904)This subcontract involves the supply of one unit of nonmetallic tubing, part number 1051F-21-03 under NSN 4710-01-662-6904, for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing the tubing in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. Notably, the use of additive manufacturing is prohibited for this requirement. The contractor must ensure that packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129 standards, respectively. The final product is to be delivered FOB Origin to Camp Humphreys in South Korea. This opportunity falls under NAICS code 326122 and is managed by the Department of Defense.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Metal Tube Assemblies (NSN 4710016532686)This subcontract with the DLA Weapons Support Fluid Handling Division involves the manufacture or procurement of eight metal tube assemblies under NSN 4710016532686. The contractor is responsible for utilizing metal fabrication and quality assurance testing equipment to deliver the completed units to Tinker AFB. Strict adherence to quality and documentation standards is required, specifically performing sampling and inspection according to MIL-STD-1916 or ASQ H1331 Table 1. Additionally, the provider must ensure all supply chain traceability documentation meets the requirements established in August 2016.

POSTED

about 5 hours ago

DEADLINE

Supply of Square/Rectangular Metallic Tubing (ASTM A513)This subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the manufacture or sourcing of square and rectangular metallic tubing for prime contractors. The specific requirements call for 1 inch square tubes with a 0.125 inch wall thickness and 24 feet length, adhering to ASTM A513 Grade MT 1010 to MT 1020, Type 2 (A.W.C.R.), Flash In standards. The contractor must utilize precision cutting and forming equipment to ensure all dimensional tolerances and DLA packaging requirements are met for the delivery of NSN 4710010841168. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332312, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, following the posting date of October 28, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Scrapers (NSN 1710999813941)This subcontract involves the procurement of 14 units of a specific scraper component, identified by NSN 1710999813941, to support prime contractors working on projects for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The contractor is responsible for sourcing the parts and ensuring that all items are packaged in accordance with ASTM D3951 and the DLA Master List of Technical and Quality Requirements. The final delivery of all 14 scrapers is required by June 7, 2026. The performance of this contract is associated with NAICS code 423830 and will be executed in New Cumberland, Pennsylvania.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Seamless Titanium Alloy Tube SupplierThis subcontract involves the supply of 16 seamless plain round titanium alloy tubes for the DLA Weapons Support Fluid Handling Division. Each tube must be manufactured to specific dimensions, featuring a 0.750 inch outer diameter, a 0.065 inch wall thickness, and a length of 8 feet. Performance takes place in Cherry Point, North Carolina, under NAICS code 332999. The supplier must ensure strict adherence to source-controlled drawings, ASTM D3951, and MIL-STD-129 packaging standards. A Certificate of Quality Compliance is required for the order and must be uploaded to the iRAPT system. The response deadline for this opportunity is November 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Nut Assembly (Tube Coupler) SupplyThis subcontract involves the manufacture or sourcing of 16 units of the Nut Assembly, Tube Coupler, identified by NSN 4730012461366. The items must be produced in accordance with TDP Rev A Gen 1 and delivered to the DLA Weapons Support Fluid Handling Division. Compliance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling is mandatory. The contract is managed under NAICS code 332996 with performance taking place in Jacksonville. To be eligible for this award, contractors must maintain active registrations in both SAM and WAWF. The response deadline for this requirement is November 9, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

Marine Hatch Assembly (NSN 2040015355766)This subcontract involves the manufacture or procurement of one Marine Hatch assembly under NSN 2040015355766 for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The contractor is responsible for ensuring the assembly is produced from marine-grade materials and adheres to strict marking, labeling, and packaging standards as defined by MIL-STD-129 and MIL-STD-2073-1E. Compliance requirements are rigorous, necessitating adherence to ITAR and EAR export controls, as well as CMMC Level 2 and NIST SP 800-171 security assessments. The final deliverable is a single completed, packaged, and labeled marine hatch assembly. Interested parties must respond by November 9, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Sediment Strainers (NSN 4730001257948)This subcontract involves the manufacture or procurement of two sediment strainers meeting NSN 4730001257948 specifications for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider must ensure all units are packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement. The project falls under NAICS code 332996 and is managed by the Department of Defense. Performance will take place in Jacksonville, with a response deadline set for November 9, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply and Traceability Management for Critical Hose AssembliesThis subcontract, issued by the Department of Defense DLA Weapons Support Fluid Handling Division, requires the procurement and supply of nonmetallic hose assemblies, specifically part numbers C-MBEU147231 or MBEU147231, for prime contractors providing life support equipment. The selected provider must source these components from authorized suppliers and ensure strict supply chain traceability in accordance with DLAD C03. Additionally, all deliveries must include the necessary quality and provenance certifications to verify authenticity and standards. Operational requirements include adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Entities acting as non-manufacturers are required to hold SAE AS9100 certification. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026, falling under NAICS code 423840.

Industrial Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Critical Safety Nonmetallic Hose AssembliesThis subcontract, issued by the Department of Defense DLA Weapons Support Fluid Handling Division, involves the manufacturing of critical safety nonmetallic hose assemblies for prime contractors providing life support equipment. The selected provider must fabricate assemblies to Martin-Baker Aircraft Company Limited part numbers C-MBEU147231 or MBEU147231, ensuring strict adherence to SAE AS9100 standards. The contractor is required to maintain SAE AS9100 certification and implement comprehensive supply chain traceability in accordance with DLAD C03. All deliverables must be marked and packaged according to MIL-STD-129 and MIL-STD-2073-1E standards and must be accompanied by full traceability documentation. The response deadline for this requirement is November 12, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Straight Pipe-to-Hose AdaptersThis subcontract involves the supply of two straight pipe-to-hose adapters to prime contractors supporting the Department of Defense, specifically for the DLA Weapons Support Fluid Handling Division. The required materials must match NSN 4730013466227 and either Gates Corporation part number 4-8MPX or 7302-0918-5. All deliverables must be palletized according to DLA Packaging Requirements RP001. The opportunity is categorized under NAICS code 332999, with a response deadline set for November 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Steel Pipe Nipple SupplierThis subcontract involves the supply of steel pipe nipples for prime contractors fulfilling DLA supply contracts under the Department of Defense. The required components are 1/4 inch nominal pipe size with a 1-1/2 inch nominal leg length, manufactured in accordance with ASTM A733 specifications. All items must be delivered with a Certificate of Conformance per FAR 52.246-15 and must strictly adhere to the Buy American Act and Berry Amendment. Logistical requirements specify that packaging must follow ASTM D3951 and RP001 standards, with labeling compliant with MIL-STD-129. The specific item requested is NSN 4730010909148, with performance taking place in El Paso. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

PLATE, SEAL RETAININ

Solicitation # SPE4A5-27-T-2027

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

SCREW, CLOSE TOLERANCE

Solicitation # SPE4A6-27-T-7328

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

COVER, OIL PRESSURE

Solicitation # SPE4A5-27-T-2048

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS