Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

ACTUATOR, MECHANICAL, NO

Active
SPE7L3-27-T-1628Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

336320 - Motor Vehicle Electrical and Electronic Equipment Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT
Office AddressUSA
Contacts
Benita Umoren
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ACTUATOR,MECHANICAL,NONAIRCRAFT
ACTUATOR,MECHANICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
JERED LLC 98523 P/N 15662091-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018834186 0001 EA 1.000
NSN/MATERIAL:3040014680838
DELIVERY (IN DAYS):0158
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7L3-27-T-1628
SECTION B
PR: 7018834186 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:C
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:04/20/2027 Original Required Delivery Date:08/09/2027
SPE7L3-27-T-1628 NSN/Part Number: 3040-01-468-0838 Quantity: 1 EA Purchase Request: 7018834186QTY: 1 Delivery: 158 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336320
New
DIBBS
Supplier of Electrical Wire (NSN 6145-01-695-9285)This subcontract involves the manufacture or sourcing of specialized electrical wire for prime contractors supporting Department of Defense Maritime Supply Chain contracts. The supplier must ensure all materials meet the specific requirements of NSN 6145-01-695-9285 and the DLA Master List. Strict adherence to military standards is required, including MIL-DTL-12000 for preservation and packaging, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging data. The agreement mandates compliance with DFARS 252.204-7012 and DFARS 252.225-7001 regulations. All completed shipments are to be delivered FOB Destination to the designated place of performance in FPO 96306-0001. The opportunity is categorized under NAICS code 336320, with a response deadline set for November 4, 2026.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336320
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A5-27-T-1629
Solicitation SPE4A5-27-T-1629 is a fixed-price request for quotation issued by the DLA Weapons Support ASC for the procurement of two light lenses, identified as commercial items under NSN 6220014699556 and Grimes Aerospace Company part number 25-1761-21C. The requirement is not a small business set-aside, though it utilizes the HUBZone price evaluation preference. The original required delivery date is January 21, 2028, with a need ship date of April 20, 2027, and delivery terms set as FOB Origin. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and technical standards, requiring the manufacturer's inspection system to comply with ISO 9001:2015 or an equivalent standard. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based plan. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including a specific fragile marking code. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and various DFARS cybersecurity and safeguarding regulations. Quotes must be submitted via the DIBBS system.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336320
New
DIBBS
Windshield Wiper Arm ManufacturingThis subcontract involves the manufacture of 901 windshield wiper arms under NSN 2540-01-377-3125 for prime contractors supporting the DLA Weapons Support Strategic Acquisition Program Directorate. The selected provider must fabricate all parts in strict accordance with the Basic Drawing and Product Item Description for Critical Application Items, ensuring high precision and adherence to technical specifications. The contract mandates rigorous quality control measures, including full supply chain traceability documentation and batch identification. Additionally, the manufacturer must comply with Counterfeit Detection and Avoidance Program standards to ensure the integrity of the components. This effort falls under NAICS code 336320 and is managed through the Department of Defense.
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

3 days ago

DEADLINE

in 29 days
View Details
NAICS: 336320
New
DIBBS
LIGHT, NAVIGATIONAL, AIR
Solicitation # SPE4A6-27-T-7538
Solicitation SPE4A6-27-T-7538, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of aircraft navigational lights under NSN 6220015088223. The requirement consists of two line items totaling 15 units, with 3 units destined for DLA Distribution Depot Hill and 12 units for DLA Distribution Warner Robins. The procurement identifies Luminescent Systems, Inc. (P/N 30-3016-15) and Lockheed Martin Corp (P/N 698041-15) as relevant part number sources. Delivery is required within 171 days, with a need ship date of April 27, 2027, and an original required delivery date of January 2, 2028. The contract is established as FOB Origin, and the First Destination Transportation program is utilized to manage shipping costs. Inspection and acceptance will occur at the origin, following sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must adhere to MIL-STD-2073-1E and RP001, with marking compliant with MIL-STD-129 and a specific fragile designation. Item Unique Identification is not required. The contract incorporates various FAR and DFARS clauses, including those for safeguarding covered defense information, cyber incident reporting, and prohibitions on certain telecommunications equipment. Payment and invoicing must be processed through the Wide Area WorkFlow system. Quotations are due by November 6, 2026, via the DIBBS portal, and the agency may apply a HUBZone price evaluation preference during the award process.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 336320
New
DIBBS
LIGHT, NAVIGATIONAL, AIR
Solicitation # SPE4A6-27-T-5591
Solicitation SPE4A6-27-T-5591 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 12 aircraft navigational lights, identified by NSN 6220-01-443-3031. The contract requires delivery to the DLA Distribution Depot at Hill AFB, Utah, with a required delivery date of April 22, 2027, and a need ship date of April 6, 2027. Shipping is designated as FOB Origin, and inspection and acceptance will occur at the destination. This procurement is subject to strict export controls under ITAR and EAR regulations, requiring contractors to hold an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training. Technical requirements include adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking with a fragile designation, and RP001 for palletization. Additionally, the contractor must comply with the Buy American Act, the Berry Amendment, and CMMC Level 2 cybersecurity standards. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336320
New
DIBBS
POST ASSEMBLY, SUPPORT
Solicitation # SPE4A5-27-T-1599
Solicitation SPE4A5-27-T-1599 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of 10 units of Post Assembly, Support, identified by NSN 6220006992252. This is a Foreign Military Sales requirement destined for the No 101 Air Logistics Center in Karachi, Pakistan, with shipping handled via Eagle Van Lines. The required delivery timeframe is 20 days after award, with an original required delivery date of October 26, 2026. Terms are FOB Origin, and both inspection and acceptance will occur at the origin. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-130N for identification marking of U.S. military property. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, with a zero-non-conformance acceptance policy for sample lots. Additionally, the offeror must comply with the Buy American and Balance of Payments Program, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336320
New
DIBBS
GENERATOR, ENGINE ACCES
Solicitation # SPE7L5-27-T-0443
Solicitation SPE7L5-27-T-0443 is a request for quotations issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of eight engine accessory generators, identified by NSN 2920-01-566-9918. This acquisition is designated as a Women-Owned Small Business Set-Aside under NAICS code 336320. The required delivery date is May 1, 2027, with a need ship date of April 6, 2027, and a delivery period of 147 days after order. Shipping is FOB Origin, with the final destination for inspection and acceptance being DLA Dist San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, which take precedence over the general packaging standard ASTM D3951. All items must be marked and labeled according to MIL-STD-129 and require Item Unique Identification in accordance with MIL-STD-130 and DFARS 252.211-7003. Palletization must comply with DLA packaging requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports, and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and hazardous material identification.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
PARTS KIT, ELECTRICAL E
Solicitation # SPE7L5-27-T-0441
Solicitation SPE7L5-27-T-0441 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supplier Opns Engines for 172 electrical engine starter parts kits, identified by NSN 2920-01-138-4860. The required delivery is 147 days after order, with a destination of DLA Distribution Anniston in Alabama. This procurement is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training to access technical data. The contract mandates rigorous packaging and marking standards, including compliance with Special Packaging Instruction 514617 Revision C, MIL-STD-2073-1 Appendix D for kits, and MIL-STD-129 for marking. Technical compliance is based on TDP Rev A Gen 1 and drawing 19207 5705071, with specific requirements to procure part numbers 1852888 and 1979391 from CAGE 1LW55. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to CMMC Level 2 cybersecurity standards. Inspection and acceptance will occur at the destination per FAR 52.246-1.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
CONTROL, DIRECTIONAL SIGNAL LIGHT, AUTOMOT
Solicitation # SPE4A6-27-R-X151
Solicitation SPE4A6-27-R-X151 is a Firm Fixed Price Indefinite Delivery Purchase Order issued by the DLA Weapons Support ASC Commodities Division for the procurement of 92 automotive directional signal light controls, identified by NSN 6220-00-211-6146. The contract establishes a base period of five years with a required delivery lead time of 70 days after receipt of order. Delivery, inspection, and acceptance will occur at various CONUS stock locations. The government will determine the best value award based on a comparative assessment of price, past performance, and quoted delivery, with SPRS assessments and historical quality and delivery compliance weighted most heavily. Technical requirements include strict adherence to DLA Master List specifications, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging must comply with RP001 for palletization and MIL-STD-129 for marking and labeling, while hazardous materials must follow TQ requirement IP025. The contractor is required to use the Wide Area WorkFlow system for invoicing and payment. Key compliance mandates include DFARS 252.204-7012 for safeguarding covered defense information and registration in the System for Award Management. The item is associated with several approved manufacturers, including Grote Industries, Grove U.S. LLC, Truck-Lite Co., Vehicle Safety Manufacturing, and Textron Ground Support Equipment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 336320
New
DIBBS
Supplier of Electrical Engine Starter Parts KitsThis subcontract involves the procurement or manufacture of electrical engine starter parts kits to support prime contractors fulfilling DLA supply contracts. Specifically, the supplier is responsible for providing parts kit NSN 2920011384860, which includes part numbers 1852888 and 1979391 sourced from CAGE 1LW55. All deliverables must be completed and provided by March 2027. The contract is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Engines. Compliance with the Berry Amendment and the Buy American Act is mandatory, and the supplier must maintain CMMC Level 2 certification. The opportunity falls under NAICS code 336320, with a response deadline set for November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
Federal
Generator, Direct CU
Solicitation # SPRDL1-27-R-A041
This firm fixed price contract, managed by DLA Land Warren, is for the procurement of Direct CU Generators, identified by NSN 6115-01-545-5921 and manufacturer part number 12462682-1. The requirement specifies a minimum quantity of 157 units and a maximum of 521 units, with shipping terms set as FOB Destination. This is a sole source solicitation designated for C.E. Niehoff, and the Technical Data Package is restricted to the sole source manufacturer. The solicitation is expected to be released on the SAM website around November 13, 2026, with a response deadline of December 18, 2026. A key provision of this procurement is the potential use of a reverse auction for pricing, which would require participating contractors to be registered in the system and complete mandatory online training. Interested parties can find further details and registration information through the ProcureX portal.
DLA Land Warren

POSTED

3 days ago

DEADLINE

in about 2 months
View Details
NAICS: 336320
New
SLED
Adapter
Solicitation # Z5457
Nashville Electric Service is soliciting bids under solicitation number Z5457 for 12 volt vehicle auxiliary power point adapters. The required equipment must feature twin accessory sockets and be fuse protected, specifically requesting part CUST ACC 18889 or an approved equivalent. If an alternate brand is proposed, vendors must specify the brand in the comments field and provide descriptive literature. Bids must be submitted through the Bid Center by 2:00 pm local time on November 3, 2026. A critical requirement for the proposal is for vendors to state their earliest delivery time in calendar days, as delivery speed may be a determining factor in the award. For any clarifications regarding part numbers or descriptions, vendors should contact Procurement Buyer II Kyle Kegley before the closing date.
Nashville Electric Service

POSTED

3 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 423830
New
DIBBS
Supply of Cylinder Slave (NSN 2590-01-495-7218)This subcontract involves the procurement and delivery of one Cylinder Slave, part number 53.0300.1000, for prime contractors supporting DLA Weapons Support projects. The required components are sourced from Terex Cranes Germany GmbH and must be delivered FOB Origin. The contractor is required to adhere to strict Department of Defense standards, including Item Unique Identification per MIL-STD-130, marking and labeling per MIL-STD-129, and packaging guidelines per ASTM D3951 and RP001. All deliverables must comply with the DLA Master List of Technical and Quality Requirements.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
Supply of Preformed Packing (NSN 5330-01-721-0524)This subcontract involves the manufacture or sourcing of 750 units of preformed packing, specifically part number 5330-01-721-0524, for the DLA Weapons Support Land Supplier Opns Vehicle SPT. The components must be of domestic origin and packaged in medium duty, waterproof, greaseproof, opaque bags in strict accordance with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1 standards. The contractor is required to hold US/Canada Joint Certification Program certification to be eligible for this project. Performance will take place in Tracy, California, under NAICS code 339999, supporting prime contractors within the Department of Defense.
All Other Miscellaneous Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 488510
New
DIBBS
International Military Packaging and Freight ServicesThis subcontract for International Military Packaging and Freight Services supports prime contractors under the DLA Weapons Support Land Supplier operations. The scope of work involves providing specialized military-grade packaging, loading, stowing, and bracing of equipment in strict accordance with ASTM D3951 and RP001 standards, with marking and labeling compliant with MIL-STD-129. The logistics component requires managing the international transport of materials to a bulk break point at Camp Zama, followed by final delivery to the Kyoga-Misaki Communication Site in Kyoto, Japan. This Department of Defense requirement falls under NAICS code 488510 and is managed by the DLA Weapons Support Land Supplier Office.
Freight Transportation Arrangement

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
Cylinder Tilt with Side Shift Assembly (NSN 2590-01-495-7222)This subcontract involves the procurement of one complete Cylinder Tilt with Side Shift assembly, identified by NSN 2590-01-495-7222, for prime contractors supporting the Department of Defense DLA Weapons Support Land Supplier operations. The assembly must be manufactured or procured in strict accordance with Terex Cranes Germany GmbH part number 53.0600.0800 specifications. Key compliance requirements include the implementation of IUID marking as mandated by MIL-STD-130 and DFARS 252.211-7003. Additionally, the provider is required to submit all necessary material certifications and process operation sheets to ensure quality and technical adherence. The opportunity is categorized under NAICS code 333999.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Gasket Supply (NSN 5330-01-677-5529)This subcontract involves the supply of 79 asbestos-free gaskets under NSN 5330-01-677-5529 for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The contractor is responsible for manufacturing or sourcing the gaskets according to technical drawings, conducting Product Verification Testing, and providing all necessary material certifications and process operation sheets. Strict adherence to military standards is required for the final delivery, including packaging in waterproof, greaseproof, opaque bags per MIL-DTL-117 and marking shipments according to MIL-STD-129 and MIL-STD-2073-1E. The performance of this contract is centered in New Cumberland, Pennsylvania, with the final delivery consisting of the 79 gaskets accompanied by the required certifications and drawings.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 333618
New
DIBBS
MANIFOLD, EXHAUST
Solicitation # SPE7L3-27-T-1042
Solicitation SPE7L3-27-T-1042 is a total small business set-aside issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of 81 exhaust manifolds, identified by NSN 2815-01-434-5184 and Renk America LLC part number E9AR108-0070. This critical application item is being acquired under the First Destination Transportation program with an original required delivery date of April 3, 2027, and a need ship date of April 6, 2027. Offers must be submitted via the DIBBS portal based on FOB Origin terms, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and requires packaging and marking in accordance with MIL-STD-2073-1E and MIL-STD-129. Palletization must follow RP001 requirements. Administrative compliance includes electronic invoicing through the Wide Area WorkFlow system and adherence to various FAR and DFARS clauses, including those regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of covered defense telecommunications equipment. All hazardous materials must be labeled according to the Hazard Communication Standard.
Other Engine Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336370
New
DIBBS
BRACE, FENDER
Solicitation # SPE7L3-27-U-0023
Solicitation SPE7L3-27-U-0023 is a Total Small Business Set-Aside issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of fender braces, specifically NSN 2510015772396 and Daimler Truck North America LLC part number FLT 1600 15MA. This requirement is for a Unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and an estimated quantity of 33 units. Delivery is required within 41 days after order, with shipping terms set as FOB Destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List Technical and Quality Requirements taking precedence. Palletization must comply with RP001. Inspection and acceptance will occur at the destination. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Additionally, the contract mandates compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.
Motor Vehicle Metal Stamping

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332999
New
DIBBS
GRILLE, RADIATOR, VEHICU
Solicitation # SPE7L3-27-U-0024
Solicitation SPE7L3-27-U-0024 is a total small business set-aside issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of vehicular radiator grilles, specifically Daimler Truck North America LLC part number A17-20035-000, NSN 2510-01-576-5277. The requirement is for an estimated quantity of 12 units under an Indefinite Delivery Contract with a maximum value of 350,000.00 dollars. Delivery is required within 41 days after receipt of order, with inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring palletization complies with DLA requirement RP001. Technical and quality requirements are governed by the DLA Master List, which takes precedence over general packaging standards. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation also incorporates various DFARS and FAR clauses regarding cybersecurity, the safeguarding of covered defense information, and domestic material restrictions under the Buy American Act.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336992
New
DIBBS
CYLINDER SLAVE
Solicitation # SPE7L3-27-Q-0086
Solicitation SPE7L3-27-Q-0086 is a small business set-aside request for a firm fixed price contract to procure one Cylinder Slave, identified as NSN 2590-01-495-7218 and Terex Cranes Germany GmbH part number 53.0300.1000. The procurement is managed by the DLA Weapons Support Land Supplier Operations Vehicle Support. Delivery is required within 52 days after receipt of order, with the final destination and inspection point located in Japan at the USALRCTR Camp Zama and the Kyogamisaki Communication Site. The contractor must adhere to strict technical and quality standards, including Item Unique Identification in accordance with MIL-STD-130 and the prohibition of Class I ozone depleting chemicals. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Award will be based on the best value, evaluating price, offered delivery, and past performance. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HINGE, DOOR, VEHICULAR
Solicitation # SPE7L3-27-U-0026
Solicitation SPE7L3-27-U-0026 is a request for quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of vehicular door hinges, specifically Daimler Truck North America LLC part number WWS 50036-3420, NSN 2510015766278. This is a total small business set-aside under NAICS code 332999, intended to result in a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000.00 dollars. The estimated annual quantity is 9 units, though this is an estimate and not a guaranteed purchase. Quotations are based on price for the estimated annual demand and must be submitted via the DLA Internet Bid Board System. The contract requires delivery within 88 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements RP001, noting that the DLA Master List of Technical and Quality Requirements takes precedence. Environmental restrictions strictly prohibit the use of Class I Ozone Depleting Chemicals. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and equal opportunity.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7L3-27-T-1047
Solicitation SPE7L3-27-T-1047 is issued by the DLA Weapons Support Land Supplier Opns Vehicle SPT for the procurement of 192 feet of nonmetallic special shaped section seals, identified by NSN 5330-00-377-6524. The requirement allows for a quantity variance of plus or minus 10 percent, and offerors are encouraged to provide quantity ranges to accommodate demand volatility. Delivery is required within 104 days after receipt of order, with a designated delivery point at DLA Dist San Joaquin in Tracy, California. While the solicitation contains conflicting FOB terms, it explicitly instructs offerors to submit quotes based on FOB Origin. The contract mandates strict adherence to technical and security standards. Technical data is subject to export control under ITAR or EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed DLA export-control training. Security requirements include CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, specifically requiring items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 326291
New
DIBBS
SEAL ASSEMBLY
Solicitation # SPE7L3-27-T-1050
Solicitation SPE7L3-27-T-1050 is a request for quotations from the DLA Weapons Support Land Supplier Ops Vehicle SPT for the procurement of 23 seal assemblies under National Stock Number 5330-01-180-2636. The items are to be delivered to the DLA Distribution Depot at Hill AFB, Utah, with a need ship date of June 7, 2027, and an original required delivery date of October 31, 2027. This is a restricted source item requiring engineering source approval by the Government Design Control Activity. To be eligible for award, offerors must possess an approved US/Canada Joint Certification Program certification and provide a Safety Data Sheet for any hazardous materials. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Because the items fall under Federal Supply Classifications 5330/5331 and are susceptible to UV deterioration, they must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. All supplied items must be free of asbestos. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. Quotes must be submitted via the DLA Internet Bid Board System.
Rubber Product Manufacturing for Mechanical Use

POSTED

2 days ago

DEADLINE

in 3 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS