Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BEARING UNIT, ROLLER

Active
SPE4A6-26-T-01D2Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of 17 units of the Bearing Unit, Roller, identified by NSN 3130015610242, to be delivered to the W1A8 DLA Distribution location within 171 days after order. This solicitation is issued as a Request for Quote (RFQ) and is available exclusively online, with no hard copies provided. Potential suppliers can access the solicitation details, digitized drawings, and relevant Military Specifications and Standards electronically. All responsible sources are invited to submit quotes electronically by the response deadline of March 27, 2026, for consideration. The procurement falls under the NAICS code 332991 and is managed by DLA Aviation, a Department of Defense agency located in Richmond, Virginia. The solicitation, identified by the number SPE4A626T01D2, was posted on March 19, 2026, and is classified as a combined type contract without a set-aside designation. Interested parties seeking further information or clarifications can contact the designated buyer through the provided email or access additional information via the official government procurement portal. The place of performance is not specified beyond the general location of the agency office.

General Info

Procurement of 17 roller bearing units, delivery in 171 days, quotes due March 27, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-01D2 Request for Quotations

PDF•23 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
SHALONDA DAVIS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING UNIT,ROLLER
BEARING UNIT<(>,<)> ROLLER
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3130-01-561-0242 Quantity: 17 EA Purchase Request: 7015993338QTY: 17 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-16GX
This contract is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 30 sleeve bushings. The required items are identified by NSN 3120-01-605-6646 and part number KJB586007B, with Kamatics Corporation listed as the source of supply. The contract specifies a delivery timeline of 219 days after order, with a required delivery date of March 28, 2027, shipped FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance with several technical and quality standards is mandatory, including DLA packaging requirements, MIL-STD-129 for marking, and MIL-STD-2073-1E for delivery preparation. The agreement incorporates specific quality requirements for both manufacturers and non-manufacturers and mandates the removal of government identification from any non-accepted supplies. Inspection and acceptance will take place at the destination.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A6-26-T-19VE
The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE4A6-26-T-19VE for the procurement of thrust washer bearings. This federal requirement, identified by NSN/Part Number 3120-01-210-1758 and Purchase Request 7017917551, specifies a total quantity of 63 units. The solicitation was posted on August 18, 2026, with a response deadline set for August 26, 2026. Interested parties can find further details and submit responses through the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332991
New
DIBBS
BEARING, NEEDLE, INLE
Solicitation # SPE4A6-26-T-20CU
This solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-T-20CU, is for the procurement of 257 needle bearings, identified by NSN 3110-01-171-3789 and part number 2-300-033-01. The item is designated as a critical application item and a source control item, with approved sources including Honeywell International Inc. and JTEKT Bearings North America LLC. Technical compliance must adhere to basic drawing 91547 and reference QAP 13873. Delivery is required within 171 days, with inspection and acceptance occurring at the origin. The contract imposes strict sourcing restrictions under DFARS 252.225-7016, requiring that the bearings be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component cost originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Additionally, the contract mandates strict adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-DTL-197M preservation standards. It further specifies that mercury or mercury-containing compounds must not be intentionally added to the hardware, except where functionally required by NAVSEA specifications.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-20BA
This contract is for the procurement of seven sleeve bushings, identified as part number 780953S25A and NSN 3120-01-215-2569. The item is classified as a commercial, source control, and critical application item, with Hamilton Sundstrand Corporation and Eaton Aviation Corporation listed as approved sources. Technical compliance is required according to drawing 780953 Revision K and quality assurance per QAP 13873. The agreement specifies a delivery timeframe of 164 days after the order, with a required delivery date of August 14, 2027. Inspection and acceptance will occur at the origin. The contractor must adhere to DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 for marking. Additionally, the contract mandates compliance with CMMC Level 2 self-assessment and the protection of covered defense information. Shipping is directed to the DLA Distribution Depot Oklahoma at Tinker AFB.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332991
New
Federal
31--BEARING CARTRIDGE A
Solicitation # N0010426RZB69
The contract involves the manufacture or repair of a bearing cartridge identified by NSN 7H-3130-016536544-L1, with a quantity of four units to be delivered to N66604, NUWCDIVNPT in Newport, Rhode Island. Production requires the use of master or coordinated tooling, indicating specialized manufacturing processes and tight control over part consistency and quality. The solicitation is not conducted under FAR Part 12 for commercial items, and the government is not currently seeking commercial solutions, though interested parties may still propose commercial alternatives within 15 days of the notice. This acquisition is subject to international trade obligations, including the Buy American Act exemptions under Free Trade Agreements and the World Trade Organization Government Procurement Agreement, as stipulated by specific DFARS clauses. The solicitation number is N0010426RZB69, posted on August 1, 2026, with responses due by September 15, 2026. The contracting activity is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with the primary point of contact being Michael Thoman at the Mechanicsburg, Pennsylvania office.
Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332991
New
Federal
31--BEARING UNIT PLAIN
Solicitation # N0010425QYG54
This contract pertains to the manufacture and supply of a Lower Bearing Assembly #12 for use on U.S. Navy submarines, identified by part number 7HH 3130 015481560 SQ and drawing numbers including 6853520, 7094231, 7094232, 7094233, and 8627964. The requirement is 100 percent set aside for small businesses, with the solicitation closed on July 17, 2026, following multiple extensions. The contractor must adhere to stringent quality, material, and manufacturing standards specified in military and industry documents such as MIL-STD-130N, MIL-DTL-18240, SAE AMS5845, ASME B46.1, ISO 9001, and multiple NAVSEA technical publications. All components must be fabricated with certified materials, including specific alloys like MP35N and NI-CU, and non-metallics like Nylok and UHMW polyethylene, with complete traceability by heat, lot, and serial number. First article testing and inspection are mandatory and require prior government approval, involving 100 percent dimensional and nondestructive testing, including visual and liquid penetrant inspection of welds on the Extension Weldment Assembly. Welders and NDT personnel must be qualified under NAVSEA standards, and all procedures, certifications, and test reports must be submitted for review by the Naval Surface Warfare Center, Philadelphia Division, the designated acceptance authority. The supplier must maintain a quality system compliant with MIL-I-45208 or ISO 9001 and NCSL Z540.3 or ISO 10012, and submit extensive documentation including material certifications, welding procedure qualifications, inspection reports, and a mercury exclusion certification, as the use of mercury or mercury contamination is strictly prohibited. Final acceptance requires government approval of all submitted data via the Wide Area Workflow system, and all contractual documents are considered issued upon electronic transmission. The contract includes a one-year warranty from the date of delivery, with defects to be remedied within 45 days of discovery. All items must be marked and packaged per MIL-STD-2073 and MIL-STD-130, and delivery is FOB destination.
Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332991
New
Federal
BEARING,SLEEVE
Solicitation # N0010426QFG41
This contract is a solicitation for the manufacture and delivery of flanged bearing sleeves, designated as Special Emphasis material due to their use in crucial shipboard systems where failure could result in serious injury or loss of vessel. The items must be produced in accordance with NAVSEA drawing 7384566, with Kamatics identified as the approved source of supply. The procurement includes a strict delivery schedule requiring the submission of certification data 20 days prior to delivery, followed by an 18-day review period by the Portsmouth Naval Shipyard before final material delivery within 210 days. The contractor must maintain a quality system compliant with ISO-9001 and adhere to rigorous traceability and certification requirements, including the submission of a detailed Certificate of Compliance. All materials must be mercury-free and satisfy specific toxicity and flammability requirements. Government Quality Assurance is performed at the source via DCMA, and any deviations or engineering changes require formal approval from the Contracting Officer. The contract is DO certified for national defense under the Defense Priorities and Allocations System.
Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332991
New
DIBBS
Supply of Self-Aligning Plain Bearings (NSN 3120-01-087-9397)This subcontract, issued by the Department of Defense through the ASC Commodities Division, requires the supply of three self-aligning plain bearings. The items are identified by NSN 3120-01-087-9397 and part number 4049T74P01, and must be manufactured according to GE drawing 4049T74 Rev D and TDP Rev C Gen 3. All deliverables must adhere to DLA technical, marking, and packaging standards. The procurement falls under NAICS code 332991 and specifies Cherry Point as the place of performance. The solicitation was posted on August 27, 2026, with a response deadline of September 1, 2026.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332991
New
DIBBS
Supply of Retaining Rings (NSN 3110012379099)This subcontract through the Department of Defense ASC Commodities Division involves the manufacture and supply of six Retaining Rings under NSN 3110012379099. The contractor must ensure all units are produced to strict military specifications, specifically adhering to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking standards. The procurement falls under NAICS code 332991 and was posted on August 27, 2026, with a response deadline of September 1, 2026. All deliverables must meet the technical requirements specified by the agency to ensure compatibility and compliance with defense standards.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332991
New
DIBBS
Supply of Retainer and Roller Bearings (NSN 3110016808034)
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332991
New
DIBBS
Supply of Thrust Washer Bearings (NSN: 3120013980360)This subcontract involves the manufacture and supply of eight thrust washer bearings, identified by NSN 3120013980360, for DLA Aviation under the Department of Defense. The project is managed by the ASC Commodities Division and requires strict adherence to defense technical specifications, packaging standards, and origin inspection requirements. The performance of this contract will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of September 1, 2026, following the solicitation posted on August 27, 2026. The work falls under NAICS code 332991.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332991
New
DIBBS
Outer Bearing Ring Manufacturing and Supply
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 334310
New
DIBBS
RF Cable Assembly Manufacturing
Audio and Video Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
DIBBS
BRUSH, ELECTRICAL CONTA
Solicitation # SPE4A6-26-T-21KY
Solicitation SPE4A6-26-T-21KY is a fixed-price procurement issued by the DLA Aviation ASC Commodities Division for the supply of electrical contact brushes, identified by NSN 5977-01-518-3353. The requirement is split across three CLINs with varying quantities: 2 units for PR 7017960160, 12 units for PR 7017932044, and 20 units for PR 7017932043. Delivery is required within 5 days after receipt of order, with original required delivery dates ranging from March 16, 2026, to August 18, 2026. Shipping destinations include the USS Lyndon B. Johnson in Maine, the USS Zumwalt in the FPO AP region, and the SRF-JRMC in Sasebo, Japan. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. A critical prohibition is placed on the use of mercury or mercury compounds in preservation, packaging, and marking. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with destination inspection and acceptance. Offerors must comply with the Buy American Act and the Berry Amendment, and quotes must be submitted via DIBBS. Invoicing and payment processing are to be handled through the Wide Area WorkFlow system.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
RIVET, SOLID
Solicitation # SPE4A6-26-T-21GK
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 57 pounds of solid rivets under NSN 5320-01-005-4078. The contract is open for full competition in accordance with military and federal specifications, with a required delivery timeframe of 169 days after the order is placed. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and the removal of government identification from any non-accepted supplies. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components as defined by NAVSEA.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
RIVET, SOLID
Solicitation # SPE4A6-26-T-4487
This solicitation, identified as SPE4A6-26-T-4487, is issued by the Department of Defense ASC Commodities Division for the procurement of 19 pounds of solid rivets under NSN 5320-00-684-9909. The contract requires delivery within 170 days after the order is placed and specifies that performance will take place at Robins Air Force Base. The agreement mandates strict adherence to DLA packaging and quality requirements, including specific sampling methods based on MIL-STD-1916 or ASQ H1331. Due to the nature of the technical data, the contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have approved JCP certification and completed specific DLA training to access controlled data. Inspection and acceptance are to be conducted at the origin.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIV
Solicitation # SPE4A6-26-T-21GM
This contract is for the procurement of 4,930 plain blind rivet nuts, identified as part number NAS1329A3-80 with thread class 3B. The items are classified as critical application commercial hardware and must be manufactured according to the current revision of the NAS1329 and NASM25027 standards. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contract allows for certificate of conformance procedures under FAR 52.246-15. The order is designated under NSN 5310-00-052-7528 and requires delivery to DLA Distribution Jacksonville within 167 days. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Physical identification and bare item marking must adhere to MIL-STD-130N. The required delivery date is set for April 12, 2027, with a need ship date of February 12, 2027.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, OCTAGON
Solicitation # SPE4A6-26-T-21GQ
This contract is for the procurement of 41 plain octagon nuts under solicitation SPE4A6-26-T-21GQ for the Department of Defense. The items are identified by NSN 5310-01-043-0596 and are associated with critical application parts from Load King, LLC and Hendrickson Trailer Suspension. Delivery is required within 167 days, with a need date of February 12, 2027, and a final required delivery date of March 28, 2027. The shipment is designated FOB Origin and will be delivered to the DLA Distribution Depot at Hill AFB, Utah. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformance required for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements RP001. The contract incorporates specific technical and quality requirements from the DLA Master List, including provisions for the removal of government identification from non-accepted supplies and specific bare item marking requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-T-20PD
This solicitation from the Defense Logistics Agency involves the procurement of 286 close tolerance screws, identified by NSN 5305-01-462-2886. The contract requires strict adherence to technical and quality requirements maintained in the DLA master list, including specific provisions for physical identification, bare item marking, and DLA packaging standards. Delivery is required within 175 days after the delivery order date. Compliance with rigorous sampling and inspection protocols is mandatory, utilizing methods such as MIL-STD-1916 or ASQ H1331 to verify critical, major, and minor attributes. Furthermore, the technical data associated with this item is subject to export controls under ITAR or EAR regulations. Contractors must possess an approved US/Canada Joint Certification Program certification and complete required training to access and handle this controlled data.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12QC
Solicitation SPE4A6-26-T-12QC is a Department of Defense procurement issued by the ASC Commodities Division for six units of a specific cable assembly, NSN 6150016311300. The contract is established as FOB Origin with a required delivery date of October 19, 2026, and a delivery window of 67 days after the award date. All items are to be delivered to the DLA Distribution San Joaquin facility in Tracy, California, where both inspection and acceptance will occur. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance will be managed via MIL-STD-1916 or ASQ H1331 zero-based sampling plans, with specific AQLs assigned for critical, major, and minor attributes. The procurement incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, prohibition of certain telecommunications equipment, and hazard warning labeling per 29 CFR 1910.1200. Invoicing must be processed electronically through the Wide Area WorkFlow system. Proposals are due by August 12, 2026, via the DIBBS portal.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SLOTT
Solicitation # SPE4A6-26-Q-1381
This contract is a solicitation for the procurement of 6,216 self-locking slotted hexagon nuts, identified by NSN 5310-00-111-3813 and part number MS17826-10. The items are designated as critical application items and must be manufactured according to the current revision of the applicable military or consensus non-government part standards. Delivery is required within 247 days after order, with both inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and palletization standards per RP001 and MIL-STD-129. Quality assurance will be managed through zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Additionally, the contract requires compliance with MIL-STD-130N for physical identification and marking, and specifies that the supplier must be on the Qualified Suppliers List for Manufacturers or Distributors where applicable.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334513
New
DIBBS
TUBE, METERING
Solicitation # SPE4A6-26-T-21AS
This contract is for the procurement of two metering tubes, identified as commercial off the shelf items under NSN 6680-01-624-0250 and part number TMS-9322. The order is governed by the DLA Master List of Technical and Quality Requirements, specifically incorporating standards for packaging, physical identification, and the removal of government identification from non-accepted supplies. The items have no shelf life requirement and must be delivered to the USS Michael Monsoor within 20 days. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow RP001 requirements. The contract specifies delivery and acceptance at the destination, with a strict zero percent quantity variance allowed.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, DOUBLE HEXAGON
Solicitation # SPE4A6-26-R-XC90
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 14,268 self-locking double hexagon nuts under NSN 5310-01-099-6538. The contract is a total small business set-aside with a delivery requirement of 615 days after order. The agreement mandates strict adherence to DLA packaging requirements and SAE AS9100 higher-level quality standards. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access sensitive information.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details