This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on July 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

31--BUSHING,SLEEVE

Closed

SPE4A626T04TCFederal

Submission Closed07/16/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332991

New

DIBBS

BEARING, BALL, ANNULAThe contract specifies the procurement of a single annular ball bearing with precise technical specifications including a 17mm bore diameter, 40mm outer diameter, overall width of 0.6875 inches, ABEC 1 tolerances, outwardly convergent contact angle, standard internal fit-up, standard retainer, and one steel shield. The bearing must be lubricated per specification SPE4A6-26-T-09VR and comply with strict material restrictions, including the prohibition of intentional mercury or mercury-containing compounds in contact with the hardware, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents. Portable devices containing mercury must have shock-proof construction and a secondary containment barrier. The bearing must meet DLA Master List of Technical and Quality Requirements, with tailored higher-level quality standards applying to both manufacturers and non-manufacturers, and physical identification requirements mandating bare item marking. Government identification must be removed from non-accepted supplies. Measuring and test equipment must be calibrated and qualified. The item is to be packaged according to ASTM D3951 and marked per MIL-STD-129, with palletization following DLA packaging requirements, and no unit identification is required per DFARS 252.211-7003(c)(1)(i). Approved part numbers include P9618511-3 from General Electric, 5203SBKF and 5203SF from SKF USA, 5503X1217C, 5503X1R5, and 5503X2100R5 from General Motors, and B50 from Raytheon. The contract mandates delivery of one unit within 20 days FOB destination to USS GEORGE WASHINGTON CVN 73, with inspection and acceptance occurring at the destination. The NSN is 3110-00-156-4668, and the solicitation number is SPE4A6-26-T-09VR with a response deadline of August 4, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

ROLLER, LINEAR-ROTARThe contract pertains to the procurement of a ROLLER, LINEAR-ROTARY MOTION with part number 11141 and NSN 3120-01-333-3840, supplied by STANADYNE INC under CAGE code OBND4. A total of 106 units must be delivered within 79 days from the contract date, with delivery terms set as FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which override any other standards unless explicitly superseded. Sampling protocols mandate compliance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise directed, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All packaging must adhere to ASTM D3951 in conjunction with MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging requirements. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is October 5, 2025, despite the original delivery deadline of August 4, 2025. The contract includes no quantity variance and is governed by the SOLICITATION NUMBER SPE4A6-26-T-09VQ, with point of contact Katelyn Williams at the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

LINER, BEARING HOUSIThe contract pertains to the procurement of a LINER, BEARING HOUSING with NSN 3130-01-705-7084 and part number 363-20281, sourced from RIX INDUSTRIES, and is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The item is classified as a critical application component and must comply with tailored higher-level contract quality requirements applicable to both manufacturers and non-manufacturers. Mercury and mercury-containing compounds are strictly prohibited in contact with the hardware unless specifically exempted for functional uses in batteries, fluorescent lamps, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with any exempted mercury-containing portable devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. Packaging must adhere strictly to MIL-STD-2073-1E and DLA packaging standards, with marking conforming to MIL-STD-129 and no special marking codes. Delivery is FOB destination with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The item must be delivered within 20 days to USS HYMAN G RICKOVER (SSN 795), with shipment directed via fastest traceable means, excluding parcel post, and must be labeled with RDD 777 and V2715761744050. The solicitation number is SPE4A6-26-T-09TG, with a required delivery date of July 16, 2026, and the contract is managed under DLA’s Commodities Division with Robin Braden as the point of contact.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BEARING HALF, WASHER, THThis contract is for the supply of 155 units of a bearing half washer assembly, identified by NSN 3120-01-676-4998 and part number S9262-AV-MMA-010, under solicitation SPE4A6-26-T-07NJ. Delivery is required within 169 days of award, with shipment originating from the supplier and delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract strictly enforces adherence to DLA packaging standards based on MIL-STD-2073-1E and MIL-STD-129 for marking, with prohibited use of mercury or mercury compounds in preservation, packaging, or on the product itself, except under narrowly defined exemptions such as functional use in batteries, sensors, or specified instruments per NAVSEA guidelines. Portable fluorescent lamps and instruments containing mercury must include a secondary containment and be shockproof as per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified. Quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and tailored higher-level quality provisions apply to both manufacturers and non-manufacturers. The contract prohibits government identification removal from non-accepted supplies and mandates compliance with all technical, quality, and packaging directives incorporated by reference. The purchase request number is 7017536493, with a unit price of $155.00 for a total contract value of $24,025.00, and a required ship date of January 13, 2027.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BUSHING, SLEEVEThe contract is for the procurement of 587 units of a bushing, sleeve with NSN 3120-01-185-3498 under solicitation SPE4A6-26-T-07MX, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 169 days of an as-directed order, with a need ship date of January 13, 2027, and final delivery due by February 12, 2027, to the DDSP New Cumberland Facility in Pennsylvania. The contract specifies FOB destination delivery terms and mandates compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including standardized 2D Data Matrix barcoding. Preservation is to be conducted using CLNG/DRY method with material 49. The item is subject to export control under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program status, complete DOD export control training, and gain DLA authorization to access technical data. Technical and quality requirements referenced through R or I numbers are governed by the DLA Master List, with revisions in effect on the solicitation issue or award date controlling based on acquisition type. Inspection and acceptance occur at origin under RQ009, with the contractor’s quality system required to meet SAE AS9003 or ISO 9001 standards. The contract includes clauses on sustainable products, hazardous material identification, employment eligibility, combating trafficking, and NIST SP 800-171 cybersecurity assessment requirements. Export-controlled technical data must be handled per DFARS 252.225-7048, and physical item marking follows RQ017. The contract requires use of Wide Area WorkFlow for invoicing, with payment administered through the local contract administrator identified in DD Form 1155 Block 6. No completed pricing structure or contract value is evident, though partial unit prices appear in historical references. Offerors must hold a valid UEI and CAGE code and complete representations regarding small business status, though no socioeconomic set-aside is specified. The contract type remains undetermined pending award. No key personnel, security clearances, or contract options are required, and the only special requirement beyond compliance is the labeling of hazardous materials per 252.223-7001. Proposals must be

ASC COMMODITIES DIVISION

POSTED

DEADLINE

ASC COMMODITIES DIVISION

POSTED

DEADLINE

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BEARING, WASHER, THRU

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CASE, PHOTOGRAPHIC EQUI

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

BEARING, BALL, ANNULA

ASC COMMODITIES DIVISION

POSTED

DEADLINE

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BEARING, BALL, ANNULARThe contract is for the procurement of five annular ball bearings, identified by NSN 3110001362652 and part number 571-9415-02, sourced exclusively from approved manufacturers Timken Aerospace & Super Precision and New Hampshire Ball Bearings Inc., with mandatory compliance to technical specifications defined by drawing 571-9415 Revision W and quality assurance program QAP-13873. The item is source-controlled, requiring manufacturers to possess access to limited rights data or demonstrate traceability to approved sources; source approval requests are mandatory for new vendors. The bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50% of the total cost of components—rolling elements, retainer, inner race, or outer race—originating from these regions, per DFARS 252.225-7016, and contractors must submit a completed declaration of domestic origin. The item is designated as critical application with a non-extendable 18-month shelf life, Type I (Code K), requiring special shelf-life marking in accordance with MIL-STD-129. Delivery is due within five days after award, with FOB origin terms, and inspection and acceptance occur at the vendor’s facility. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-197M, including preservation methods selected per bearing type and closure, protective lubricants per Table II, and compliance with quality assurance protocols in Section 4 of MIL-DTL-197M. Marking requires MIL-STD-129-compliant 2D Data Matrix barcodes and the special code 32 for shelf life, with palletization meeting DLA packaging standards. Cybersecurity maturity model certification (CMMC) Level 2 self-assessment is required, and safeguarding of covered defense information must comply with DFARS 252.204-7012. The contractor must also comply with prohibitions on hexavalent chromium and hazardous material handling per DFARS 252.223-7008 and 252.223-7001, and submit safety data sheets where applicable. Invoicing must be processed through WAWF, and compliance with all technical, quality, packaging, and cybersecurity requirements is mandatory for award consideration.

ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days

AI Contract Overview

The contract solicits 275 bushings, sleeve, identified by NSN 3120013841255, to be delivered to the DLA Distribution Depot in Oklahoma within 199 days after award. Only approved sources with the part numbers 9505M11P08 under vendor codes 07482, 21214, and 34087 are eligible to respond. The solicitation is issued as a Request for Quote under solicitation number SPE4A6626T04TC, and it is exclusively available electronically via the provided SAM.gov link; no hard copies are distributed, and no technical specifications, plans, or drawings are provided. All responsible sources may submit quotes, provided they are received electronically before the deadline. This is a Total Small Business Set-Aside under NAICS code 332991, reserved exclusively for small businesses as defined by the SBA. The procurement is managed by the Department of Defense through DLA Aviation, with the office located in Richmond, Virginia. Questions must be directed via email to the designated point of contact, as specified in the solicitation document available through the official DIBBS portal.

General Info

275 bushings solicited for DLA Oklahoma, small business set-aside, electronic quotes only, NSN 3120013841255.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 8

Combined Synopsis

Response DeadlineJul 16

Deadline has passed

Submission Closed

07/16/2026, 12:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / Agency

Department Of Defense → DLA Aviation

View Agency Profile

Office AddressRICHMOND, VA, 23237, USA

Contacts

contact@example.gov

Full Description

Proposed procurement for NSN 3120013841255 BUSHING,SLEEVE: Line 0001 Qty 275 UI EA Deliver To: DLA DISTRIBUTION DEPOT OKLAHOMA By: 0199 DAYS ADO Approved sources are 07482 9505M11P08; 21214 9505M11P08; 34087 9505M11P08. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.