Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from California was posted on May 12, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

332095 Truck, Drill Rig (EMISSIONS) Item # 25-729R

Closed
RFB-IS-25201158State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237120
New
SLED
WH Ford RTC Fueling System Repairs, Kentucky
Solicitation # W9128F27RA054
Solicitation W9128F27RA054 is a Firm Fixed Price, Design-Build project for fueling system repairs at the W.H. Ford Regional Training Center in Greenville, Kentucky. The scope of work involves comprehensive mechanical, structural, and electrical upgrades, including upgrading tank automatic tank gauges, repairing dispenser and offload island concrete, installing emergency fuel shut-off systems, and mounting leak detector probes. Additional requirements include replacing canopy and fuel pipe coatings, installing concrete circulation pavement and splash blocks, replacing tank vents and roof penetration boot seals, providing deadman control for truck loading, and modifying tank access platforms and grounding systems. All work must adhere to UFC, NFPA, ASTM, and ADA/ABA standards, with specific identification requirements following MIL-STD-161H. The project has a performance period of 410 calendar days, with a final delivery date of June 18, 2027, and requires work to commence within 10 days of the Notice to Proceed. Proposals will be evaluated using the Lowest Price Technically Acceptable (LPTA) method, focusing on relevant experience, a detailed Gantt chart covering preconstruction, on-site construction, and post-construction phases, and a well-defined construction methodology. Submissions must be divided into a Technical Volume and a Price Volume. The contract mandates compliance with the Davis-Bacon Act for labor rates, strict cybersecurity protocols for contractor equipment, and the implementation of a three-phase quality control system.
Bristol Alliance of Companies

POSTED

about 2 hours ago

DEADLINE

in about 1 month
NAICS: 237120
New
Federal
Mather Fueling System Repairs
Solicitation # PANNWD26P028176
The Mather Fueling System Repairs project, solicitation W9128F27RA045, is a design-build effort located at the Mather Army Aviation Support Facility in California. Managed by the USACE Omaha District, this firm-fixed-price contract is restricted as a total small business set-aside. The scope of work involves comprehensive repairs to AVGAS fueling systems, including the installation of sampling gauge hatches, mechanical gauges, and an automatic tank gauge system. Key construction tasks include recoating the tank exterior, replacing collision barriers, adding a full-length catwalk, and replacing audible and visual alarms. Additionally, the project requires the demolition and replacement of the POL operation building, relocation of a generator with a new concrete pad, repair of remote containment basin drainage, and various asphalt and concrete pavement replacements. The procurement utilizes the Lowest Price Technically Acceptable (LPTA) source selection method, evaluating proposals based on project experience—requiring three examples of projects exceeding 1 million dollars—and a detailed project schedule. The projected period of performance is 365 days. Contractors must comply with the Davis-Bacon Act for prevailing wages and adhere to strict regulatory standards, including UFC 3-460, OSHA, EPA, and DOT requirements. Deliverables include design documents in English units, as-built drawings, and a multi-stage inspection process consisting of punch-out, pre-final, and final acceptance inspections. Performance and payment bonds are required within 10 days of award.
W071 Endist Omaha

POSTED

1 day ago

DEADLINE

in 27 days
NAICS: 237120
New
SLED
Hammerman Gas/Diesel Tank Replacement Gunpowder Falls State Park
Solicitation # BPM059366
This project, solicitation BPM059366, involves the removal and replacement of above-ground gasoline and diesel fuel storage systems at the Gunpowder Falls State Park Hammerman Area in Baltimore County, Maryland. The scope of work requires the contractor to provide all labor, equipment, and materials to remove existing tanks, dispensers, piping, electronic systems, concrete pads, and bollards. Key deliverables include the installation of new storage tanks, concrete pads, and side-mount dispensers, as well as the provision of temporary gasoline and diesel tanks with metered dispensers for the duration of the project. All work must adhere to strict safety and environmental standards, including NFPA 30, 30A, and 78, API standards 650 and 620, and Maryland Department of the Environment regulations, with backfill compacted to a minimum of 95 percent. The contract is a Small Business Reserve Procurement, limiting the award to certified small businesses. The basis of award is the lowest responsive and responsible total bid. Procurement goals include a 15.00% MBE and 2.0% VSBE participation rate, with liquidated damages applicable for failure to comply with MBE requirements. The state reserves the right to apply reciprocal preference for resident bidders. Final acceptance is contingent upon the approval of the Facility Manager and DNR Project Engineer, requiring the submission of an approved electrical inspection certificate, a disposal manifest for contaminated soils and equipment, and three sets of manufacturer manuals and as-built drawings. Invoices are to be submitted to the Maryland Department of Natural Resources in Annapolis, with payments typically issued within 30 days of receipt of a proper invoice.

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 237120
New
Federal
WH Ford RTC Fueling System Repairs
Solicitation # W9128F27RA054
Solicitation W9128F27RA054 is a design-build, firm-fixed-price contract for fueling system repairs at the W.H. Ford Regional Training Center in Kentucky, managed by the US Army Corps of Engineers, Omaha District. This project is a total set-aside restricted to 100% small businesses under NAICS code 237120. The scope of work involves comprehensive upgrades to two 10,000-gallon above-ground storage tanks, including the installation of an emergency fuel shutoff station, leak detection equipment, and an upgraded automatic tank gauging system. Additional requirements include repairing concrete and pavement, recoating fuel system canopies and piping, replacing tank vents, and improving grounding systems and equipment access platforms. All work must adhere to EM 385-1-1 safety standards, as well as IBC, NFPA, and ADA accessibility guidelines. Proposals must be submitted electronically in two separate volumes: a technical volume covering specialized experience, a Gantt chart for the project schedule, and a technical approach, and a separate pricing volume. The government will utilize the Lowest Price Technically Acceptable (LPTA) source selection process to award the contract. The proposal submission deadline has been extended to December 21, 2026, at 14:00 CST. Once awarded, the contractor must commence work within 10 days of the Notice to Proceed, with a final completion deadline of June 18, 2027. Compliance with the Davis-Bacon Act and Buy American requirements is mandatory.
W071 Endist Omaha

POSTED

3 days ago

DEADLINE

in about 1 month
NAICS: 237120
New
Federal
Gas Line Repair
Solicitation # GasLineRepair
The 55th Contracting Squadron at Offutt Air Force Base, Nebraska, is conducting a sources sought market survey to identify qualified contractors for the repair and replacement of gas distribution system components. The scope of work includes repairing gas leaks on 6 inch and 8 inch pipes and valves, as well as replacing components on 2 inch pipes and valves. Specific tasks involve repairing a 6 inch HDPE line near B479, replacing 8 inch valves and flanges near B73, and replacing a 2 inch isolation valve on the service line to B73. The project also requires the replacement or reconnection of cathodic protection and the installation of new valve boxes and risers marked for gas. The period of performance extends from the time of award until April 30, 2027. Due to base gas load requirements, the 8 inch valve replacement must be performed during warmer spring weather, specifically when temperatures show five consecutive days with lows above 40 degrees Fahrenheit and highs above 65 degrees Fahrenheit. All work must comply with 49 CFR 192, API, ASME, and American Gas Association standards, as well as ISO 9001 quality management processes. Contractors are required to provide welder certifications and perform pressure testing for at least one hour post-installation. This is a small business set-aside under NAICS code 237120. Interested parties must submit their capabilities package, including company information and socio-economic status, to the designated point of contact by 12:00 PM CST on November 17, 2026.
FA4600 55 Cons Pkp

POSTED

4 days ago

DEADLINE

in 10 days

Documents

7
PDF, High priority: read this first14 pages · purchasing-required-forms
High
PDF, High priority: read this first14 pages · supporting-documents
High
PDF, High priority: read this firstrfb
High
PDF, High priority: read this firstrfb
High
PDF, High priority: read this firstspecifications
High
XLSX, Low priority4 pages · form
Low
XLSX, Low priority4 pages · other
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseClosed
Posted

Solicitation

Notice updated

Response deadline changed from Jun 5, 2025 to May 27, 2025. The notice title changed. The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyCalifornia → LA County Internal Services Department
Contacts1 person available
OfficeN/A
Office AddressN/A

Full Description

Show more
332095 TRUCK, DRILL RIG (EMISSIONS) ITEM # 25-729R

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS