Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

3950--Sheridan VA Medical Center - Towable Trailer-Mounted Boom Lift

Active
36C25926Q0732Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Veterans Affairs through Network Contract Office 19 is seeking information on towable trailer-mounted boom lifts for use at the Sheridan VA Medical Center in Wyoming. The solicitation, identified by number 36C25926Q0732, was posted on August 5, 2026, with responses due by August 17, 2026, at 6:00 p.m. Eastern Time. The contract falls under NAICS code 333120, which pertains to construction machinery manufacturing, indicating the focus is on equipment specifically designed for elevated work tasks in maintenance or facility operations. The primary point of contact is Contracting Officer Barron Long, reachable via email or phone, and inquiries should be directed to him for further clarification or submission of capabilities. The equipment is intended for performance at the Sheridan VA Medical Center, ZIP code 82801, and the office managing the procurement is located in Greenwood Village, Colorado. This is a sources-sought notice, meaning it is not a formal request for proposals but rather an effort to gather market information to assist in future acquisition planning. No set-aside preferences have been designated at this time.

General Info

VA seeks info on towable boom lifts for Sheridan Medical Center by August 17, 2026, via Contracting Officer Barron Long.

Agency

Department Of Veterans Affairs → Network Contract Office 19 (36C259)View Agency

NAICS

333120 - Construction Machinery ManufacturingView NAICS

Place of Performance

Department of Veterans Affairs Sheridan VA Medical Center, Sheridan, WY, 82801, USA

Set-Aside

NONE

Documents

(3)

Solicitation 36C25926Q0732 - Sheridan VA Towable Trailer-Mounted Boom Lift

DOCXsources-sought

Sources Sought Notice for Towable Trailer-Mounted Boom Lift

DOCXsources-sought

Specifications and Salient Characteristics for Boom Lift

DOCXspecifications

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → Network Contract Office 19 (36C259)
Contacts1 person available
OfficeGreenwood Village, CO, 80111, USA
Organization / Agency
Department Of Veterans Affairs → Network Contract Office 19 (36C259)
View Agency Profile
Office AddressGreenwood Village, CO, 80111, USA
Contacts
Barron LongContracting Officer

Full Description

Show more
Towable Trailer-Mounted Boom Lift

Similar Contracts

Same NAICS industry code

NAICS: 333120
New
DIBBS
Supply of Forklift Handling Attachment (COTS)The contract involves the supply of two commercial off-the-shelf handling attachments for forklift trucks, identified by NSN 3930015296382 and manufactured by JLG Industries, Inc. under Part Number 66152145. These attachments are intended for military use and are classified as subcontracted procurement under NAICS Code 333120, which pertains to construction machinery manufacturing. The solicitation is issued by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MANU & CON, with performance taking place in New Cumberland, Pennsylvania, at zip code 17070-5002. The opportunity was posted on August 5, 2026, with responses due by August 17, 2026, and is accessible via the DIBBS platform. The contract is structured as a subcontract, indicating that the primary contractor may be sourcing these components from a specialized supplier to fulfill a larger defense requirement. There is no set-aside designation specified, meaning the procurement is open to all eligible vendors without preference for small businesses, veteran-owned firms, or other categories. The equipment is a standard commercial item, which simplifies acquisition under federal procurement rules but still requires compliance with military specifications for durability and compatibility. The lack of a designated point of contact and detailed office address suggests that all communications and submissions will be handled through the DIBBS portal, making it essential for vendors to submit proposals through the provided online link prior to the deadline.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333120
New
DIBBS
GATE ASSY, DRAIN PAN
Solicitation # SPE8EF-26-T-1568
The contract is for the procurement of six units of a Gate Assembly, Drain Pan, identified by NSN 1740-01-498-6195 and part number 791605-001, under solicitation SPE8EF-26-T-1568. The item is to be delivered FOB origin with a required delivery date 167 days after the need date of February 1, 2027, and must comply fully with the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling and RP001 for DLA packaging requirements, with palletization specified accordingly. The quantity is fixed with no variance allowed, and inspection and acceptance both occur at the destination. The unit price is $6.00 per unit, resulting in a total contract value of $36.00. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and all shipping must follow DLAD Proc Note C19 for transportation and C20 for first destination transport. The contract includes provisions for handling covered defense information and mandates the removal of government identification from non-accepted supplies. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and the contracting office is under the Department of Defense, with Russell Keiser listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333120
New
DIBBS
REEL, CABLE
Solicitation # SPE8EE-26-T-2254
The contract pertains to the procurement of one reel of cable identified by NSN 3895-01-513-6582 and part number 2HA942, with an additional quantity of four units under a separate line item, totaling five units. Delivery is required within 87 days from the contract award, with all items to be shipped FOB origin and inspected and accepted at the destination. Quantity variance is strictly zero percent, meaning exact fulfillment is mandatory. Packaging must comply with ASTM D3951, but any conflicting requirements from the DLA Master List of Technical and Quality Requirements supersede this standard. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement. Two delivery destinations are specified: one for Barstow, California, and another for Albany, Georgia, each with distinct shipping addresses and contact details. The required ship dates vary between the two deliveries, with the earliest set for August 3, 2026, and the latest for February 26, 2027, though the original delivery deadline is January 1, 2027. Transportation logistics are governed by DLAD Procurement Notes C19 and C20. The contract is issued under solicitation SPE8EE-26-T-2254, with the acquisition classified under NAICS code 333120 and managed by the Department of Defense. All documentation and compliance obligations are tied to the DLA Master List of Technical and Quality Requirements, and the unit of issue follows DoD standards as referenced in the official DLA Excel registry.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333120
New
DIBBS
HANDLING ATTACHMENT
Solicitation # SPE8EF-26-T-1583
The contract specifies the procurement of two Handling Attachments for Fork Lift Trucks, identified by NSN 3930-01-529-6382 and part number 6615214S from JLG Industries, Inc., under solicitation SPE8EF-26-T-1583. The items must be delivered FOB origin within 167 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951, but DLA Master List of Technical and Quality Requirements take precedence over any conflicting provisions. Packaging and labeling must adhere strictly to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, with a required ship date of February 1, 2027, and an original delivery deadline of February 27, 2027. Transportation details are governed by DLAD Proc Note C19 for general transport and C20 for first destination moves. The unit of issue is each, priced at $2.00 per unit, totaling $4.00. The contract incorporates all applicable technical and quality requirements referenced by R or I numbers from the DLA Master List, and government identification must be removed from non-accepted supplies. Covered defense information may apply, requiring compliance with relevant safeguarding regulations.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333120
New
Federal
Aberdeen Test Center CAT 299D3 Non-Line Of Sight (NLOS) Remote Operations Kit
Solicitation # W91CRB-CAT-299D3-NLOS
The US Army Contracting Command at Aberdeen Proving Ground, Maryland, is preparing to solicit a sole-source contract for the modification of a Government-owned Caterpillar 299D3 Skid Steer Loader into a remotely operated, unmanned platform using the Caterpillar Non-Line of Sight (NLOS) Remote Operations Kit. The requirement is justified under FAR 12.102(a) as a brand-name limited source procurement and will be evaluated using simplified procedures under FAR 12.201. The contractor must supply specific branded components including two Vision Kits, a Wi-Fi Kit, a Mobile Mark LTM Dome Antenna, a CISCO IW3702 CPU, an Axiomatic Power Converter, and all associated operator manuals. The contract includes on-site installation and a single training session for up to three personnel. All equipment must be covered by a full one-year manufacturer’s warranty beginning at final government acceptance, and delivery and installation must be completed no later than September 30, 2026, at the Aberdeen Test Center. The North American Industry Classification System code is 333120 with a small business size standard of 1,250 employees. The solicitation will be issued as an RFQ with quotes due within five days of receipt, and no RFQ copies will be posted on SAM.gov; vendors must monitor the site for updates. The point of contact for inquiries is Noah Lane, with Karen Gibson as secondary contact.
W6QK Acc-Apg

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Veterans Affairs → Network Contract Office 19 (36C259)

Same awarding agency

NAICS: 334510
New
Federal
6515--436 - Fort Harrison Audiometric Sound Booth for Kalispell VA CBOC
Solicitation # 36C25926Q0667
The Department of Veterans Affairs is seeking a firm-fixed price contract for the procurement, delivery, installation, and commissioning of one custom-built, single-walled audiometric sound booth at the Kalispell VA Community-Based Outpatient Clinic in Kalispell, Montana. The solicitation, identified as RFQ 36C25926Q0667, is a total small business set-aside under NAICS code 334510, with only SBA-verified small businesses eligible to respond. The booth must meet ANSI S3.1 and S3.2 ambient noise standards with a minimum 60 dB noise reduction rating, be fully ADA compliant including a 36-inch door and non-skid threshold, and integrate with existing VA infrastructure including electrical, data, and HVAC systems—though mechanical rough-ins will be provided by VA facilities, requiring coordination with on-site BioMed and facilities teams. All equipment must be sourced in compliance with the Buy American Act, and offerors must submit a completed Buy American Certificate as a mandatory evaluation factor. Installation must occur on the ground floor of the clinic, where ceiling height is 107 inches with mechanicals above a drop ceiling; no site visits are permitted, and proposers must rely solely on the provided specifications. The booth must include flicker-free 400 lux interior lighting, silent ventilation, cable pass-throughs, and come with comprehensive documentation certifying compliance, one-year warranty, and on-site training for VA personnel. Proposals must be submitted via email to barron.long@va.gov no later than 12:00 p.m. Mountain Time on August 17, 2026, with a maximum file size of 4MB. Offers must be structured into three volumes: pricing details, technical documentation identifying brand and model number to prove conformity with requirements, and the completed Buy American Certificate. The government will not consider partial awards or alternate proposals, and failure to meet any technical specification will result in disqualification regardless of price. Evaluation is based on a trade-off approach, weighing price, technical capability, and Buy American compliance, allowing selection of a higher-priced offer if it provides superior value. All offerors must maintain active SAM registration with a valid Unique Entity ID and affirm compliance with clauses covering trafficking in persons, equal opportunity for veterans and workers with disabilities, privacy training, and security prohibitions against equipment from covered entities. Packaging, preservation, and marking standards are not explicitly detailed beyond requiring certification documentation, and
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 339112
New
Federal
6515--AED Primary Care Replacements
Solicitation # 36C25926Q0640
This solicitation, numbered 36C25926Q0640, is a full set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSBs) under the NAICS code 339112 for surgical and medical instrument manufacturing, with a small business size standard of 1,000 employees. It is issued as a request for quote with no written solicitation to follow, and responses must be submitted in writing only—telephone inquiries are not accepted. The contract requires the supply of 24 semi-automatic automated external defibrillators (AEDs) and 24 sets of universal CPR uni-pads, each with a five-year shelf life. Each AED must operate in semi-automatic mode, deliver real-time feedback on chest compression rate and depth, and provide clear voice and visual prompts optimized for users with minimal training or under stress. The CPR pads must be compatible with both adult and pediatric patients and include a built-in accelerometer to support compression feedback. All deliverables are to be shipped to the Oklahoma City VA Health Care System, Attn: Nursing Service (Primary Care), with a firm deadline for quotes by August 13, 2026. The contract is managed by the Department of Veterans Affairs through the Network Contract Office 19, located in Greenwood Village, Colorado, with Christopher DeLauro listed as the primary point of contact. Pricing details for each item and total contract value are left blank for offerors to complete. The solicitation incorporates all provisions and clauses effective through FAC 2025-007 and strictly adheres to the format outlined in FAR Subpart 12.6. No substitutions or alternative proposals are permitted beyond the stated specifications, and compliance with all requirements is mandatory for consideration.
Surgical and Medical Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 811210
New
Federal
J066--Eye Laser & Cryostat Service Agreement POP: 9/1/2026-8/31/2031
Solicitation # 36C25926Q0646_0001
This contract is a firm-fixed price Indefinite-Delivery Indefinite-Quantity (IDIQ) agreement for Eye Laser and Cryostat Service and Support, issued as a Request for Quote (RFQ) by the Department of Veterans Affairs Network Contracting Office 19 in support of the Montana VA Health Care System. The period of performance spans five years from September 1, 2026, to August 31, 2031, with options to extend services for up to an additional six months. Services are to be performed at VA facilities in Fort Harrison and Billings, Montana, and include preventive and corrective maintenance for Alcon Centurian Vision lasers, Lumenis Selecta Trio lasers, and Leica CM1860 cryostats, with each line item covering a one-year base period and multiple option years. The contract is a total small business set-aside exclusively for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSBs), requiring full compliance with SBA regulations and VA-specific limitations on subcontracting. Offerors must submit a four-volume proposal detailing capability, price, past performance, and subcontracting compliance, with pricing provided via Attachment 1 and certifications via Attachments 2 and 3. The evaluation follows a best-value approach, prioritizing price reasonableness, responsibility, capability to meet the Statement of Work, and satisfactory past performance, with the lowest-priced responsible offeror favored if all pass/fail gates are cleared. The contract imposes extensive operational, security, and compliance requirements. All contractor personnel must undergo background investigations per VA Directive 0710 and comply with VAAR 852.204-72 personnel vetting provisions. Cybersecurity obligations include adherence to Executive Order 14028 and NIST guidelines, with mandatory self-attestation and inclusion of IT security clauses such as VAAR 852.239-71 and 852.239-75. Technical services must conform to industry standards from AAMI, ANSI, FDA, CDC, ISO, OSHA, TJC, and VHA directives, with performance measured against strict quality benchmarks: 100% conformance to SOW and OEM specifications, 95% equipment up-time, 90% response to service requests within two business hours, and satisfactory staffing qualifications. Invoicing must be submitted electronically through designated VA portals monthly in arrears, and payments will be processed by the
Electronic and Precision Equipment Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 12 days
View Details