This Solicitation opportunity from Government of Canada was posted on April 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

39903-260753C – Vessel, Motors and Trailer Package, St. John’s, Newfoundland and Labrador

Closed

WS5445943992International

Submission Closed04/02/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336612

New

DIBBS

WINDOW, MARINEThe contract is for the procurement of seven marine windows identified by the NSN 2040-01-312-8602 under solicitation number SPE7L2-26-T-0579, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, and is classified as a federal procurement with no set-aside designations specified. The windows are intended for marine applications, likely for naval vessels or maritime infrastructure, and the contract does not indicate a specific place of performance or point of contact details. Proposals must be submitted through the DIBBS system via the provided link, and the procurement is open to eligible contractors without geographic or organizational restrictions beyond federal compliance standards.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Locomotive Windshields (F40PH-3 & MP36PH-3 Models)Metra is seeking suppliers to manufacture and deliver OEM-compliant or approved equal windshields for its F40PH-3 and MP36PH-3 locomotive models, with all products required to meet specified technical and quality standards. The contract is structured as a subcontract and is open for bid through BonfireHub, with responses due by July 29, 2026. The work falls under NAICS code 336612, which classifies it within the railroad rolling stock manufacturing sector. Performance of the contract is expected to support Metra’s operations in Illinois, though the specific location of delivery or installation is not detailed. The solicitation was posted on July 24, 2026, and no set-aside preferences or organizational restrictions are indicated, meaning any qualified vendor may submit a proposal without limitation based on business size, ownership, or certification.

POSTED

DEADLINE

18' Aluminum Flat-Bottom Center Console Mud Boat ManufacturingA custom 18-foot aluminum flat-bottom center console mud boat is to be fabricated using .125-gauge 5086 marine-grade aluminum, designed for operation in shallow, muddy environments. The vessel must include USCG-compliant flotation systems, proper lighting, and electrical systems built to ABYC standards, ensuring safety and reliability in demanding conditions. The boat must be fully integrated with a 40HP surface drive outboard motor and come equipped with a matching trailer for transport and deployment. All components must be seamlessly engineered for performance, durability, and regulatory compliance, with no partial or incomplete deliverables accepted. The contract is issued under the NAICS code 336612 for boat building and is categorized as a subcontract under the Texas Parks and Wildlife Department. The solicitation was posted on July 24, 2026, with a firm deadline for responses on August 7, 2026, at 8:00 PM. Interested parties must submit complete proposals addressing all technical, safety, and integration requirements by the stated deadline, ensuring full compliance with specifications and delivery readiness. The project is to be performed without specified geographic limitations, but all materials and systems must meet the operational and regulatory demands of Texas wildlife and waterway environments.

Parks and Wildlife Department

POSTED

DEADLINE

18ft Center Console Mud Boat PackageTexas Parks and Wildlife Department is soliciting bids for a complete mud boat package consisting of an eighteen-foot aluminum flat bottom center console boat, a forty-horsepower surface drive outboard motor, and a matching aluminum boat trailer, all specifically engineered for shallow water operations amid light vegetation. The equipment must meet or exceed technical specifications outlined in the solicitation dated July 2026 to ensure durability, performance, and safety in demanding aquatic environments across Texas. The solicitation, identified as 802-27-75102-CR, was posted on July 24, 2026, with responses due by August 7, 2026, and is open to eligible vendors under a state and local government procurement program. Point of contact for inquiries is Synthia De Hoyos, reachable via phone or email, and all performance of the contract will occur within the state of Texas.

Parks and Wildlife Department

POSTED

DEADLINE

17' Aluminum Flat Bottom Center Console Mud Boat SupplyThe contract calls for the supply of three new 17-foot aluminum flat bottom center console mud boats built with .125-gauge 5086 marine-grade aluminum, ensuring durability and corrosion resistance in demanding aquatic environments. Each vessel features a self-bailing hull to enhance safety and operational efficiency in shallow, muddy waters, and is equipped with T-rail compatible cleats for secure vessel attachments and TPWD-approved tie-downs and lighting systems to meet state regulatory standards. These boats are intended for use in state-managed waterways and will support enforcement, conservation, and wildlife management missions. The solicitation is open as a subcontract under NAICS code 336612, with a response deadline of August 7, 2026, and is issued by the Texas Parks and Wildlife Department. Interested parties must submit proposals through the Texas SmartBuy portal by the specified deadline to be considered for award.

Parks and Wildlife Department

POSTED

DEADLINE

17ft Center Console Mud Boat PackagesTexas Parks and Wildlife Department is soliciting bids for three 17-foot aluminum flat bottom center console mud boat packages specifically engineered for operation in shallow waters with light vegetation. The boats and accompanying motors must meet or exceed detailed specifications outlined in the solicitation dated July 2026, ensuring durability and performance in demanding environmental conditions. The procurement is open to qualified vendors responding to solicitation number 802-27-75102-BR, with proposals due by August 7, 2026, at 8:00 PM CT. The department, operating under the SLED classification, is procuring these vessels for use throughout Texas, with performance expected to occur within the state. All inquiries and submissions should be directed to Synthia De Hoyos, the primary point of contact, via email at Synthia.DeHoyos@tpwd.texas.gov or phone at 512-389-4510. The solicitation is published on the Texas SmartBuy portal for reference and submission.

Parks and Wildlife Department

POSTED

DEADLINE

Supply of 17ft Aluminum Flat-Bottom Tiller Mud BoatsThe contract entails the manufacture or supply of four 17-foot aluminum flat-bottom tiller-operated mud boats designed for operation in shallow-water wetland and coastal environments, with strict adherence to Texas Parks and Wildlife Department specifications ensuring durability, performance, and environmental suitability. These vessels are purpose-built for accessing fragile ecosystems with minimal impact, featuring robust aluminum construction, flat bottoms for navigating mud and shallow waters, and tiller steering for precise maneuverability in tight or obstacle-heavy conditions. The solicitation is classified as a subcontract under NAICS code 336612, with a response deadline of August 7, 2026, and was posted on July 24, 2026. Performance will be conducted under the oversight of the Texas Parks and Wildlife Department, though specific delivery or installation locations are not detailed. The contract is accessible via the Texas SmartBuy portal, indicating it is part of a state procurement process intended to equip agency operations with specialized vessels for resource management, wildlife monitoring, and conservation activities in ecologically sensitive areas.

Parks and Wildlife Department

POSTED

DEADLINE

17ft Tiller Mud Boat PackagesThe Texas Parks and Wildlife Department is soliciting bids for four 17-foot aluminum flat bottom tiller mud boat packages designed for shallow water operations with light vegetation, with all specifications requiring compliance as of July 2026. Each package must include the boat and motor, engineered to perform reliably in demanding, low-depth aquatic environments typical of Texas wildlife management areas. The solicitation, identified as 802-27-75102-AR, was posted on July 24, 2026, and responses are due by August 7, 2026, at 8:00 PM Central Time. The contract falls under state-level procurement with no specific set-aside classification and is intended for performance within Texas. Synthia De Hoyos of the department serves as the primary point of contact, reachable via email at Synthia.DeHoyos@tpwd.texas.gov or by phone at 512-389-4510, and all submissions must be made through the Texas SmartBuy portal linked in the posting.

Parks and Wildlife Department

POSTED

DEADLINE

CONNECTOR,THRU-HULLThis contract pertains to the procurement of a thru-hull connector assembly designated as SPECIAL EMPHASIS MATERIAL (Level I), critical to the safe operation of shipboard systems where failure could result in catastrophic loss of life, vessel, or mission. The item must comply with specification CPG 1025 and associated drawings, with strict requirements for material composition, welding, inspections, and traceability. All critical components—including the penetrator body, cover, nut, and washers—must be manufactured from QQ-N-286 or QQ-N-281 material with full quantitative chemical and mechanical certification, and each lot must be traceable via unique heat or lot numbers permanently marked on the part or an attached durable tag. Welding procedures and qualifications must be submitted for pre-approval prior to any production or repair welding, and all welds must conform to S9074-AQ-GIB-010/248 or 0900-LP-001-7000. Material certifications must be submitted electronically via WAWF to Portsmouth Naval Shipyard (N50286) for review and acceptance prior to shipment, with no material permitted to leave the contractor’s facility without formal acceptance. The contractor is required to maintain a documented quality system compliant with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662, subject to government source inspection by DCMA. First Article Testing of one unit must be conducted at Portsmouth Naval Shipyard under government supervision, and all non-destructive and destructive tests, including ultrasonic inspection, dye penetrant testing, and hardness verification, must be performed per specified standards and documented with full traceability to the tested component. Electronic signatures on certifications are permitted but must be controlled, uniquely attributed, and tamper-evident. No molybdenum disulfide lubricants are allowed; only A-A-59004 anti-galling compound may be used on threads. The contract mandates 100% inspection of certification data and traceability markings, zero-defect acceptance criteria, and full compliance with Buy American and Small Business Subcontracting requirements. Delivery of all materials is due no later than 365 days after contract award, with certification data for weld procedures and material testing due 20 days prior to each shipment. This solicitation is issued under Emergency Acquisition Flexibilities and carries a “DO”

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

UNION ASSEMBLYThis contract governs the supply of a specialized 0.500 IPS Socketweld Union Assembly designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must strictly conform to Drawing 845-2445110 and referenced specifications including QQ-N-281, MIL-C-15726, and MIL-C-24679, with mandatory quantitative chemical and mechanical certification for specific components. All items require full traceability from raw material through final assembly, with unique heat-lot markings permanently applied and verifiable against certified test reports. Certification documentation must be submitted via WAWF to Portsmouth Naval Shipyard under DODAAC N50286, with inspection and acceptance handled by N39040, and shipments are prohibited until formal acceptance is received. Welding, brazing, and non-destructive testing procedures must be pre-approved, with detailed qualification data submitted electronically, and filler metals require certificates verifying composition and compliance. The contractor must maintain an ISO-9001 compliant quality system with ISO-10012 and ISO/IEC 17025 calibration controls, subject to government quality assurance at source, including unannounced audits and inspections by DCMA. All subcontractors are bound by the same stringent requirements, and material handling, storage, and transport must prevent commingling, contamination, or loss of traceability. Mercury and molybdenum disulfide are prohibited, while anti-galling compound A-A-59004 is mandated for threads. Final acceptance requires 100% verification of traceability, certifications, and test results, with zero-tolerance defects for lot acceptance. The contract is issued under Emergency Acquisition Flexibilities and is a DO-rated order under DPAS, prioritized for national defense use. All waivers, deviations, and engineering changes require explicit Government approval, and full compliance with NAVSEA and Navy quality directives is mandatory. The delivery window is capped at 365 days post-contract effective date, with certification data submissions due at least 20 days before each delivery.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Pedal Boat Manufacturing – Animal-Themed Recreational WatercraftThe contract involves the manufacture of five-person animal-themed pedal boats designed for recreational use on water, with specifications requiring marine-grade fiberglass construction, UV-resistant gel coat finishes, non-skid surfaces for safety, and self-draining hulls to ensure durability and ease of maintenance. Each vessel must be equipped with either a foot-pedal or hand-crank propulsion system to accommodate varying user preferences and accessibility needs, blending functionality with playful, thematic designs. The work falls under NAICS code 336612, indicating classification within the manufacturing of other recreational vehicles, and is structured as a subcontract opportunity issued by the City of Raleigh under the North Carolina state framework. The solicitation was posted on July 24, 2026, with a firm deadline for responses on August 20, 2026, at 7:00 PM Eastern Time. While no set-aside provisions or specific agency contact details are provided, the project underscores a municipal initiative to enhance public recreational offerings with innovative, durable, and user-friendly watercraft. The absence of a defined place of performance suggests flexibility in manufacturing location, though adherence to the technical specifications and delivery standards will be critical for compliance. Interested parties must ensure their proposals meet all engineering, safety, and aesthetic requirements outlined in the solicitation to be considered for award.

POSTED

DEADLINE

Supply of Boat Covers (NSN: 2040016513137)The contract requires the supply and delivery of six units of a specified boat cover identified by NSN 2040016513137, with all items must comply with military packaging and marking standards outlined in MIL-STD-129. The delivery deadline is January 19, 2027, and the place of performance is DDSP New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. This is classified as a subcontract under the NAICS code 336612, which pertains to boat building. The contracting agency is the Fluid Handling Division within the Department of Defense, and the procurement is managed through the DLA Dibbs system with the reference number SPE7M426T281A.

FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in 8 days

AI Contract Overview

Public Service Procurement Canada, on behalf of the Canadian Food Inspection Agency in St. John’s, Newfoundland and Labrador, is reissuing a solicitation for a welded aluminum vessel package as detailed in the Annex Statement of Requirement, canceling and superseding the prior solicitation dated January 20, 2026. This new solicitation, identified as WS5445943992 under title 39903-260753C, is restricted exclusively to Canadian suppliers and requires all deliverables to be completed on or before July 2026. The response deadline for submissions is April 2, 2026, at 14:00, and the solicitation falls under NAICS code 336612. De briefings will be offered to participants who submitted offers under the previous solicitation upon request. The point of contact is Kristelle LeBlanc of Public Works and Government Services Canada, reachable via email at kristelle.leblanc@tpsgc-pwgsc.gc.ca.

General Info

Public Service Procurement Canada seeks Canadian suppliers for welded Aluminum Vessel Package delivery by March 31, 2026.

Agency

Government of Canada → Department of Public Works and Government ServicesView Agency

NAICS

336612 - Boat BuildingView NAICS

Place of Performance

*St. John's, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

2 updates

PhaseClosed

PostedJan 20

Solicitation

Amendment 1Jan 20

Contract was updated

Amendment 2Mar 18

Contract was updated

Response DeadlineApr 2

Deadline has passed

Submission Closed

04/02/2026, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Public Works and Government Services

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of Public Works and Government Services

View Agency Profile

Office AddressN/A

Contacts

LeBlanc Kristelle (SPAC/PSPC) (elle-la / she-herPoint of Contact

contact@example.gov

Full Description

Reissue of Solicitation of Offers. This solicitation of offers cancels and supersedes previous solicitation of offers number 39903-260753B dated January 20, 2026 with a closing of February 12, 2026 at 15:00. A debriefing or feedback session will be provided upon request to Offeror's who offered on the previous solicitation of offers. Public Service Procurement Canada, on behalf of the Canadian Food Inspection Agency located in St. John’s Newfoundland and Labrador is looking to purchase a welded Aluminum Vessel Package as described in the Annex Statement of Requirement. All deliverables is preferred to be received on or before July, 2026. This solicitation of offers is open only to Canadian suppliers.