This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on April 13, 2009. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

40 Ton Hydraulic Axle Jack

Closed

FA4625-09-Q-0012Federal

Submission Closed04/24/2009, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

Federal

NIIN:LLW2AA020/P/N:279A146-1/NOM:ESM REC PROCESSOR

Solicitation # N0038327QF192

NAVSUP Weapon Systems Support Philadelphia intends to solicit a sole source procurement for one ESM REC PROCESSOR, identified by part number 279A146-1 and NSN 9999LLW2AA020. The acquisition falls under NAICS code 336413 and will be conducted using FAR Part 15 procedures. Because the government does not own the technical data or drawings, the award is expected to go to the currently approved source. Any other interested firms must submit a Source Approval Request, though the procurement process will not be delayed for such approvals. This notice serves as a presolicitation rather than a request for competitive proposals, with an anticipated award date in December 2026. While not a small business set-aside, the government will consider capability statements and quotations submitted within six days of the synopsis to determine if competitive procurement is viable. All solicitation activities will be handled electronically via NECO, and interested parties should direct their qualifications to the primary point of contact, Lauren Phillips.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # N0038325QD135

This contract involves the repair, testing, and inspection of the air pressure regulator, identified by part number 1660010397911, under solicitation number N0038325QD135. The work is to be performed by Northrop Grumman Systems at their facility in El Segundo, California, with a focus on returning the items to a serviceable condition in accordance with specified repair manuals and standards. The contract emphasizes strict adherence to quality management systems aligned with ISO 9001/SAE AS9100, and requires the contractor to maintain proper calibration and configuration control throughout the repair process. The repair turnaround time is set at 183 days from receipt of the asset, with provisions for early and incremental deliveries, and the contractor must ensure proper storage and handling of both pending and completed assets. Key contractual elements include detailed inspection and acceptance procedures, a requirement for the use of SAE-AS22759 series wire instead of MIL-W-81381 wire, and strict control over parts and materials, including restrictions on cannibalization and unapproved modifications. The contractor is responsible for providing all necessary parts, tooling, and facilities, unless otherwise specified as Government Furnished Material, and must maintain proper markings, storage conditions, and configuration management. The solicitation, posted by the Department of Defense’s Naval Supply Systems Command in Philadelphia, invites responses by August 25, 2025, with the primary point of contact being Casey A. Russ via email or phone.

Navsup Weapon Systems Support

POSTED

DEADLINE

16--AMPLIFIER POWER SU, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB37

This presolicitation notice from Navsup Weapon Systems Support is for the repair or modification of six power supply amplifiers under NSN 7R-1680-016422016-P8 with delivery terms set as FOB Origin. Due to the flight critical nature of the item and the specialized technical data and manufacturing knowledge required, the contract necessitates engineering source approval by the design control activity. The government intends to negotiate with a single source under FAR 6.302-1, as existing approved sources hold essential data rights and expertise not economically available to the government. Prospective bidders who are not currently approved sources must submit detailed information via the NAVSUP WSS Source Approval Information Brochures to be considered for award. Failure to provide the required source approval data will result in the proposal being disqualified. While the government is currently pursuing a single-source procurement, interested parties may submit capability statements or proposals within the specified timeframe to demonstrate their ability to satisfy the requirement.

Navsup Weapon Systems Support

POSTED

DEADLINE

16--NRP,SPOILER ASSY -, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSC37

This presolicitation notice from the Department of Defense, specifically Navsup Weapon Systems Support, is for the procurement of one spoiler assembly under NSN 7R-1680-016509016-P8 and reference number 113A4600-406. The item is classified as a commercial, nondevelopmental, off-the-shelf part with delivery terms set as FOB Origin. Due to the flight-critical nature of the component and the limitations of available technical data, the government requires source approval prior to the contract award. The government intends to solicit and negotiate with only one source under FAR 6.302-1, although other responsible sources may submit capability statements or proposals within the specified timeframe. Prospective bidders who are not already approved sources must provide detailed documentation as outlined in the NAVSUP WSS Source Approval Information Brochures to be considered for the award. The response deadline for this requirement is November 9, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

16--WHEEL HALF,AIRCRAFT, IN REPAIR/MODIFICATION OF

Solicitation # N0038327QSA05

This presolicitation, issued by the Navsup Weapon Systems Support under solicitation number N0038327QSA05, is for the procurement of 87 aircraft wheel halves (NSN 7R-1630-145977780-P8) with delivery terms set as FOB Origin. The response deadline for this requirement is November 23, 2026. Because the item is classified as flight critical or lacks sufficient technical data for open competition, Government source approval is mandatory prior to contract award. Only previously approved sources were solicited; however, new applicants must submit comprehensive documentation as outlined in the NAVSUP WSS Source Approval Information Brochures. Failure to provide the required data or proof of a pending application will result in the offer not being considered for award.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # SPRPA127QXA21

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # N0038327QMA03

Navsup Weapon Systems Support

POSTED

DEADLINE

15--FLAP ASSY, IN REPAIR/MODIFICATION OF

Solicitation # N0038325QA294

This contract involves the repair, testing, and inspection of a specific aircraft component, the FLAP ASSY, with the goal of returning it to a serviceable condition in accordance with the latest technical publications and approved procedures. The contractor is responsible for providing all necessary facilities, labor, parts, and materials, unless otherwise specified as Government Furnished Material. The scope includes performing repairs, upgrades, and overhauls, with strict adherence to approved repair manuals and configuration management protocols. The contract emphasizes quality assurance through compliance with ISO 9001/SAE AS9100 standards and requires the contractor to maintain a calibration system meeting recognized standards. Repair turnaround times are defined from the receipt of assets, with provisions for handling items that are Beyond Economic Repair (BER), Missing on Induction (MOI), or Over and Above Repair (OAR), requiring prior approval and documentation from the Defense Contract Management Agency. Additionally, the contractor must ensure proper storage, marking, and control of parts and materials, with all transactions accurately reported via the Commercial Asset Visibility system. The contract is managed by the Naval Supply Systems Command, with key points of contact provided for coordination, and it includes provisions for packaging, configuration control, and quality management to ensure the repaired items meet operational standards.

Navsup Weapon Systems Support

POSTED

DEADLINE

Combined Request for Information and Synopsis (27-R-A942)

Solicitation # SPRHA1-27-R-A942

Ut DLA Aviation At Ogden

POSTED

DEADLINE

16--WHEEL HALF,AIRCRAFT, IN REPAIR/MODIFICATION OF

Solicitation # N0038327QSA08

Solicitation N0038327QSA08, issued by the Navsup Weapon Systems Support, seeks the procurement of 88 aircraft wheel halves under NSN 7R-1630-145977780-P8 with delivery terms set as FOB Origin. Due to the flight critical nature of the item and limitations regarding available technical data, this contract requires mandatory Government source approval prior to award. Consequently, only previously approved sources have been solicited, and any new applicants must submit comprehensive documentation as detailed in the NAVSUP WSS Source Approval Information Brochures to be considered. Proposals must be submitted by November 23, 2026. Failure to provide all required source approval data or proof of a pending evaluation will result in the offer being excluded from award consideration. The government reserves the right to proceed with awards based on Fleet support needs if new source evaluations cannot be completed within the required timeframe to meet operational demands.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # SPRPA127QWA04

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # NO0383-26-Q-AB01

This Request for Quotations, issued by NAVSUP Weapon Systems Support Philadelphia on September 11, 2026, seeks technical services for the teardown, evaluation, repair, and/or modification of two specific items: a Module Assembly - Engine (NSN 1680-01-585-4772) and a Proximity Switch EL (NSN 1680-01-585-5024). The primary objective is to return these units to a Ready for Issue (RFI) condition, ensuring they perform reliably in their intended operational environments. The contractor is responsible for providing all necessary facilities, labor, materials, and specialized tooling, as the government will not provide manufacturing aids or test equipment unless expressly stated. Because these items are considered flight critical, government source approval is required prior to award, and non-approved sources must submit specific documentation via the NAVSUP WSS Philadelphia Source Approval Information Brochure. The contract mandates strict adherence to technical and quality standards, including ISO 9001 or SAE AS9100 quality management systems and specific calibration requirements. Technical data must comply with MIL-STD-130 for markings and MIL-STD-2073 for packaging, with specific provisions for electrostatic discharge protection and domestic versus overseas shipping levels. Contractors must manage complex repair scenarios, such as items determined to be Beyond Economical Repair (BER), Missing on Induction (MOI), or requiring Over and Above (OAR) repair, all of which require formal written concurrence from DCMA and the Procuring Contracting Officer. Quotations are due by October 13, 2026, and the performance period is set for 90 days following award, with all shipments being FOB Destination.

Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in about 7 hours

General Info

Agency

Department Of Defense → FA4625 509 Cons Cc

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

WHITEMAN AFB, MO, 63035, USA

Set-Aside

SBA

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedApr 13

Combined Synopsis

Response DeadlineApr 24

Deadline has passed

Submission Closed

04/24/2009, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA4625 509 Cons Cc

Contacts2 people available

OfficeWHITEMAN AFB, MO, 65305-5344, USA

Organization / AgencyDepartment Of Defense → FA4625 509 Cons Cc

Office AddressWHITEMAN AFB, MO, 65305-5344, USA

Contacts

Paul J. DentonContracring Specialist

contact@example.gov

+1 (555) 000-0000

Kurtis SchatzerContracting Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ), solicitation number FA4625-09-Q-0012. The point of contact for this RFQ is Paul Denton at (660) 687-5433 or paul.denton @whiteman.af.mil. Requirement: 40 Ton Hydaulic Axle Jack P/N: CJ67J0400-1 "or equal." 40 ton axle jack, dolly mounted with 2 manually operated pumps, 4 rams and extension screw for counter balance, vertical lifting loads up to 40 tons with a max load 44 tons with fluid reservoir intergrated into frame, and frieght. Technical Specifications must be provided for items quoted. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-32 and Defense Acquisition Circular 20090115. The following FAR Clauses and Provisions apply to this acquisition: Clause 52.211-6 Brand Name or Equal, Provision 52.212-1, Instructions to Offerors-Commercial Items; Provision 52.212-3, Offeror Representations and Certifications- Commercial Items; Clause 52.212-4, Contracts Terms and Conditions- Commercial Items; 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items. Specifically the following clauses cited are applicable to this solicitation: FAR 52.219-6, Notice of Total Small Business Set-Aside; FAR 52.222-3, Convict Labor; FAR 52.222-19, Child Labor-Cooperation with Authorities and Remedies; FAR 52.222-21, Prohibition of Segregated Facilities; FAR 52.222-26, Equal Opportunity; FAR 52.222-36, Affirmative Action for Handicapped Workers; FAR 52.225-1, Buy American Act-Supplies; FAR 52.225-13, Restrictions on Certain Foreign Purchases; and FAR 52.232-33, Payment by Electronic Funds Transfer - Central Contractor Registration. FAR 52.204-9, Personal Identity Verification of Contractor Personnel; FAR 52.247-34, F.O.B. Destination; FAR 52.252-2, Clauses Incorporated by Reference; DFARS Clause 5352.242-9000, Contractor Access to Air Force Installations; DFARS Clause 5352.201-9101, Ombudsman Clause; DFARS Clause 5352.223-9000, Elimination of ODS; FAR Clause 52.204-7, Central Contractor Registration (CCR); DFARS Clause 252.232-7003, Electronic Submission of Payment Request. Registration is required in the CCR database in order to receive a Government contract. DFARS Provision 252.212-7000, Offeror Representations and Certifications. Offerors shall include a completed copy of FAR provision 52.212-3 and DFARS Provision 252.212-7000 with their quote (Note: On-line Representations and Certifications Application (ORCA) has been implemented in FAR Clause 52.212-3 effective 01 Jan 05. ORCA enables vendors to submit and update their representations and certifications on-line. ORCA is part of the Business Partner Network (BPN) and is located at http://orca.bpn.gov. The ORCA site contains an ORCA Application Handbook and an ORCA Quick Reference Guide.) DFARS Clause 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. This procurement is a 100% Small Business set-aside IAW FAR 19.502-2 (a). The North American Industry Classification System (NAICS) code for this acquisition is 336413. For the purpose of this procurement the small business size standard is 500 employees. Award will be based on the best value to the Government. Paper copies of the Request for Quotation will not be made available. Quotations can be e-mailed to the following e-mail address: paul.denton@whiteman.af.mil or by FAX to (660) 687-5462 to the attention of Paul Denton. NOTE: Quotations must be received by 27 Apr 2009, 1:00 PM CST; late quotations will not be considered for award. Prospective offeror must be registered in the Central Contractor Registration (CCR) (www.ccr.gov) in order to be eligible for award. All responsible sources may submit a quotation which, if timely received, shall be considered by this agency. The primary consideration in evaluation of quotes received is the overall cost.