Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

43--FILL MODULE HYDRAUL

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This predicted recompete opportunity is for the procurement of three hydraulic fill modules under NSN 4320011159828 for the DLA Land and Maritime agency. The current contract, held by Jamaica Bearings Co., Inc. with a value of 78,482.10 dollars, is expected to end around November 5, 2026. The upcoming solicitation will be issued as a Request for Quote with firm fixed price pricing and is categorized as a likely recompete with medium confidence. The procurement is managed by the Department of Defense in Columbus, Ohio, with a delivery requirement of 64 days after receipt of order to DLA Distribution. All quotes must be submitted electronically, as hard copies and specific technical drawings are not available. Interested parties should refer to the electronic solicitation link for submission details, noting that approved sources include 77272 301-50102-1 and 99643 52830-1.

General Info

DLA Land and Maritime recompete for three hydraulic fill modules, firm fixed price.

Agency

Department Of Defense → DLA Land And Maritime

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing

Place of Performance

OH, 110404742, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMay 5

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Thomas Reckart

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: SPE7M125PA428 Incumbent: JAMAICA BEARINGS CO., INC. Contract Value: $78,482.1 Potential End Date: 2026-11-05T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 55/100)
Proposed procurement for NSN 4320011159828 FILL MODULE HYDRAUL: Line 0001 Qty 3 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0664 DAYS ADO Approved sources are 77272 301-50102-1; 99643 52830-1. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

Centrifugal Pump Unit (NSN 4320016774591)This subcontract, managed by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the Department of Defense, involves the procurement of one centrifugal pump unit for the USS CHARLESTON (LCS 18). The required hardware must be Weber Industries Inc DBA Webtrol part number NV25B4FE3T and strictly adhere to NSN 4320016774591 specifications. The agreement mandates full NDAA compliance concerning covered defense telecommunications equipment. Delivery of the completed pump unit is to be handled via FOB Origin, with the place of performance located at FPO 96694. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

Cylinder and Plunge Assembly SupplierThis subcontract involves the manufacture or sourcing of seven Cylinder and Plunge Assemblies for prime contractors supporting Department of Defense supply contracts. The hardware must strictly adhere to the technical specifications for NSN 4930009674829 and comply with the Buy American Act, the Berry Amendment, and mercury-free restrictions. Performance of the contract will take place in Tracy, California. To be eligible, suppliers must meet rigorous cybersecurity standards, including a CMMC Level 2 Self-Assessment and compliance with NIST SP 800-171. The opportunity was posted on October 28, 2026, with a response deadline of November 9, 2026. The project falls under NAICS code 333914 and is managed through Construction & Equipment MRO SVC I.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

Fabrication and Assembly of Manhole Closure AssembliesThis subcontract involves the fabrication and assembly of 29 manhole closure assemblies, specifically NSN 4930-01-420-7874, for prime contractors supporting DLA Troop Support projects. The contractor must adhere to all technical and quality requirements specified in the DLA Master List, with strict compliance required for the Buy American Act and the Berry Amendment. Packaging and marking must follow ASTM D3951, RP001, and MIL-STD-129 standards. The project is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 333914. Completed assemblies are to be delivered FOB Origin to DLA Distribution Red River in Texas. The response deadline for this Department of Defense requirement is November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

PUMP UNIT, CENTRIFUGAL

Solicitation # SPE7M1-27-T-1713

Solicitation SPE7M1-27-T-1713 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one centrifugal pump unit, identified by NSN 4320010862873. The required delivery date is October 23, 2026, with a delivery timeframe of 10 days after receipt of order. The item is to be delivered FOB Origin to Fort Buchanan, PR, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, specifically prohibiting the use of plastic packaging materials. Technical and quality requirements are governed by the DLA Master List, and the contractor must comply with the Buy American Act and Berry Amendment domestic sourcing restrictions. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, the contract incorporates comprehensive DFARS requirements regarding cybersecurity reporting, the prohibition of certain telecommunications equipment, and the handling of hazardous materials.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

REEL ASSEMBLY, HOSE

Solicitation # SPE8EE-27-T-0284

Solicitation SPE8EE-27-T-0284 is a request for quotations issued by the Department of Defense, specifically DLA Troop Support Construction and Equipment Manufacturing and Construction, for the procurement of 17 right-hand hose reel assemblies under NSN 4930-01-175-1425. The requirement is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside with a NAICS code of 333914. Delivery is required within 82 days after receipt of order, with a need ship date of January 31, 2027, and a final delivery destination of Texarkana, Texas. The contract is FOB Origin, with both inspection and acceptance occurring at the destination. The procurement is subject to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Palletization must adhere to RP001 requirements. Contractors are required to use the Wide Area WorkFlow system for electronic invoicing and payment processing. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and telecommunications restrictions. Quotations must be submitted via DIBBS by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

ADAPTER, PRESSURE FUEL

Solicitation # SPE8EE-27-T-0333

Solicitation SPE8EE-27-T-0333 is a Department of Defense procurement issued by the Defense Logistics Agency for 10 units of Pressure Fuel Servicing Adapters, identified by NSN 4930-01-588-1020. This HUBZone set-aside acquisition requires delivery within 135 days after order, with a need ship date of March 25, 2027, and an original required delivery date of April 8, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The procurement is managed by Philip Ferrara at DLA Troop Support.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

DRUM, HOSE REEL

Solicitation # SPE8EE-27-T-0287

Solicitation SPE8EE-27-T-0287 is a small business set-aside issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, for the procurement of 14 units of hose reel drums (NSN 4930-01-203-7774). The requirement strictly mandates new, unused, and non-refurbished material. Vendors who are not the original equipment manufacturer must provide documentation from an authorized distributor verifying the product is genuine OEM material. The delivery lead time is 91 days after award, with a required delivery date of March 15, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract incorporates rigorous quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must comply with RP001 requirements, specifically utilizing government or wing tip pallets. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with the Buy American Act and Berry Amendment. Evaluation factors emphasize technical compliance and material condition, with price preferences available for HUBZone, SDVOSB, and WOSB concerns. All quotations must be submitted through the DIBBS portal by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

LUBRICANT PACKER, BEARI

Solicitation # SPE8EE-27-T-0265

Solicitation SPE8EE-27-T-0265 is a fixed-price request for quotations issued by the DLA Troop Support Construction and Equipment Manufacturing and Construction office for the procurement of 14 units of Lubricant Packer, Bearing (NSN 4930-00-052-1764). The requirement falls under NAICS code 333914 and is managed under the First Destination Transportation program with shipping terms set as FOB Origin. Delivery is required within 167 days after the order, with a need ship date of April 26, 2027, and a destination of DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality standards, including MIL-STD-130N for identification and MIL-STD-129 for shipment marking. Packaging must comply with MIL-STD-2073-1E and DLA requirement RP001, with specific instructions to apply P-19 preservative to exterior bare ferrous metal surfaces. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Evaluation of offers requires a complete data package, and the government will not consider items produced via additive manufacturing. Additionally, the procurement incorporates various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and HUBZone price evaluation preferences. Quotations must be submitted via the DIBBS portal by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

CLOSURE ASSEMBLY, MANHO

Solicitation # SPE8EE-27-T-0293

Solicitation SPE8EE-27-T-0293 is a request for quotations issued by the Department of Defense, specifically DLA Troop Support Construction and Equipment Manu and Con, for the procurement of 29 units of Manhole Closure Assemblies (NSN 4930-01-420-7874). The requirement is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 333914. Delivery is required within 167 days after the order date, with a specified need ship date of April 26, 2027. The items are to be delivered FOB Origin to DLA Distribution Red River in Texarkana, Texas, where both inspection and acceptance will occur. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, with packaging following ASTM D3951 and RP001 standards and marking complying with MIL-STD-129. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and specific cybersecurity protocols for safeguarding covered defense information. Quotations must be submitted to the issuing office in Philadelphia by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

SLEEVE, SHAFT, PUMP

Solicitation # SPE7M0-26-T-9435

Solicitation SPE7M0-26-T-9435 is a request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Maritime Supply Chain ESOC Buys, for the procurement of one pump shaft sleeve identified by NSN 4320-01-123-0197. The requirement specifies a delivery timeline of five days after the order is placed, with the destination and acceptance point located at W8VP NJ ARNG CSMS 1 in Manchester, New Jersey. The procurement is categorized under NAICS code 333914 and includes specific approved part numbers from Curtiss-Wright Electro-Mechanical. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence over ASTM standards. Palletization must follow RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Key regulatory clauses are incorporated, including the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and prohibitions on the acquisition of certain telecommunications equipment. Evaluation for award will consider the HUBZone price evaluation preference, and offers utilizing additive manufacturing are ineligible unless specifically authorized.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

SPIDER, SWITCH HOUSING

Solicitation # SPE8EE-27-T-0280

Solicitation SPE8EE-27-T-0280 is issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment Manufacturing and Construction, for the procurement of 31 units of Spider, Switch Housing (NSN 4930-01-176-1204). The contract is categorized under NAICS code 333914 and utilizes the First Destination Transportation program to optimize shipping costs via Government-Arranged Transportation. Delivery is required within 167 days after the order, with a specified original delivery date of February 15, 2027, and a need ship date of April 26, 2027. The place of performance and delivery is Tracy, California, with FOB terms set to origin. The procurement is subject to rigorous quality and safety standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and specific restrictions prohibit the intentional addition of mercury to hardware. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The contract incorporates various FAR and DFARS clauses, including those for safeguarding covered defense information, combating trafficking in persons, and compliance with the Buy American Act and Berry Amendment. Inspection and acceptance will occur at the destination.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

NOZZLE, FUEL AND OIL SE

Solicitation # SPE8EE-27-T-0348

Solicitation SPE8EE-27-T-0348 is a request for quotations issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment Manu and Con, for the procurement of 75 fuel and oil servicing nozzles under NSN 4930-01-661-7722. The requirement is designated as a total small business set-aside under FAR 19.5, with a delivery timeline of 167 days after receipt of order. The place of performance is located in New Cumberland, Pennsylvania, and the shipping terms are established as FOB Origin. The contract mandates strict adherence to technical and quality requirements outlined in the DLA Master List, specifically RA001, which takes precedence over ASTM D3951 packaging standards. All items must be marked and labeled according to MIL-STD-129, and palletization must comply with RP001. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Additionally, the contractor must comply with various DFARS regulations regarding the Buy American Act, cybersecurity reporting under 252.204-7012, and prohibitions on covered defense telecommunications equipment.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

Pressure Switch Component SupplierThe Pressure Switch Component Supplier subcontract involves providing essential raw materials and sub-components to prime contractors manufacturing pressure switches for DLA Land and Maritime. The scope of work includes the delivery of high-grade alloys, specialized polymers, conductive materials, springs, electronic contacts, and specialized seals. All supplied materials must adhere to strict performance tolerances and specific coating requirements to ensure operational integrity. To maintain quality standards, the supplier is required to provide comprehensive material certifications and Certificates of Conformance for all deliveries. The contract falls under NAICS code 335999 and supports the Department of Defense. Interested parties should note the response deadline of November 4, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

Pressure Switch Manufacturer (NSN 5930-01-324-5328)This subcontract involves the manufacture and supply of pressure switches, specifically NSN 5930-01-324-5328, for prime contractors supporting DLA Land and Maritime hardware. The selected provider must utilize precision machining and assembly equipment to fabricate these switches in strict accordance with military specifications or approved technical data. A critical requirement of the contract is the submission of application packages through the DLA Weapons Support Alternate Offer/Source Approval Request Program to obtain AMC 3C approval. This opportunity falls under NAICS code 335313 and is managed by the Department of Defense.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 21 hours ago

DEADLINE

Switch, Pressure

Solicitation # CM26239122

DLA Land and Maritime, specifically the FMS Tactical LTC Team at DLA Weapons Support - Columbus, is conducting a sources-sought market survey for the procurement of Pressure Switches under NSN 5930-01-324-5328. The agency is seeking information from potential vendors regarding delivery timelines, quantity capabilities, and pricing structures to determine the feasibility of an Indefinite Delivery Contract with a proposed three-year base period and subsequent one-year option periods. The government is specifically looking for data on commercial availability and is requesting drawings or bills of materials to identify similarities between commercial and military equivalents. The current approved source for this item is Cameron Energy Services Corp, identified by CAGE code 05991 with multiple associated part numbers. Due to the AMC 3C designation, this part requires engineering source approval to maintain quality, as the approved sources retain essential technical data and manufacturing knowledge. Other companies wishing to be qualified as approved sources must submit an application package through the DLA Weapons Support Alternate Offer/Source Approval Request Program to demonstrate their ability to manufacture the product to the same or better quality than the original equipment manufacturer. Responses should be directed to Contract Specialist Caitlin Ferry by the deadline of November 4, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 21 hours ago

DEADLINE

INSULATING COMPOUND,ELECTRICAL

Solicitation # CM26161009

This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

HEADSET-MICROPHONE : NSN 5965-01-204-8505

Solicitation # SPE7MX26RX089

This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7MX26RX102

DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.

POSTED

DEADLINE

MULTI NSN DIESEL ENGINE

Solicitation # CM26259595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Inspection ServicesThis subcontract opportunity with DLA Land and Maritime involves providing high-precision non-destructive testing and inspection services for prime contractors on manufacturing projects. The selected provider will be responsible for verifying Critical Safety Item characteristics using X-ray, Ultrasonic, or Magnetic Particle equipment in strict accordance with MIL-STD 1916. Key deliverables include detailed inspection reports and certifications of compliance to ensure all safety and quality standards are met. To be eligible, contractors must possess a valid CAGE code and ensure all equipment is calibrated to Government standards. The work is performed in Columbus, Ohio, under NAICS code 541380. Interested parties must submit their responses by October 29, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

in about 7 hours

Earlier notices in this NAICS code

Posted before this notice, open and closed

49--LUBRICATING UNIT,PO

DLA Troop Support

POSTED

over 1 year ago

DEADLINE

43--PLATE,THRUST,ROTARY

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

USNS WILLIAM MCLEAN Brine Pumps

POSTED

over 1 year ago

DEADLINE

43--SEAL ASSEMBLY,SHAFT

Solicitation # SPE7M125Q0953

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

43--PARTS KIT,CENTRIFUG

Solicitation # SPE7M125Q0975

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

43--PUMP,AXIAL PISTONS

Solicitation # SPE7M125Q0968

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPMYM4-25-Q-0449

DLA Maritime - Pearl Harbor

POSTED

over 1 year ago

CLOSED

over 1 year ago

PUMP UNIT,CENTRIFUG

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

DEADLINE

Diesel Fuel Dispenser and Pump Replacement

USDA Forest Service-Spoc East

POSTED

over 1 year ago

DEADLINE

49--NOZZLE,FUEL AND OIL

DLA Troop Support

POSTED

over 1 year ago

DEADLINE

43--FILTER-SEPARATOR,LI

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

PUMP,CENTRIFUGAL

Solicitation # N0010425QJB96

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS