Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

43--IMPELLER,PUMP,CENTR

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This predicted recompete opportunity is for the procurement of three centrifugal pump impellers under NSN 4320016605768 for the DLA Land and Maritime agency. The current contract, held by All-Safe Inc, is valued at 73,311 dollars and is expected to end on September 24, 2026. The procurement is classified as a likely recompete with a firm fixed price structure and was previously competed under SAP. The solicitation will be issued as a Request for Quote and is available electronically. Delivery is required within 30 days after receipt of the order to DLA Distribution San Joaquin. Approved sources include specific part numbers for 13.625 inch diameter impellers. Interested responsible sources may submit electronic quotes to the point of contact, Jillian Gambill, at the DLA office in Columbus, Ohio.

General Info

DLA Land and Maritime recompete for three centrifugal pump impellers valued at 73,311 dollars.

Agency

Department Of Defense → DLA Land And Maritime

NAICS

333996 - Fluid Power Pump and Motor Manufacturing

Place of Performance

OH, 430269474, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMar 24

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Jillian Gambill

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: SPE7M125PA759 Incumbent: ALL-SAFE INC Contract Value: $73,311 Potential End Date: 2026-09-24T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 55/100)
Proposed procurement for NSN 4320016605768 IMPELLER,PUMP,CENTR: Line 0001 Qty 3 UI EA Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0030 DAYS ADO Approved sources are 10941 002-6301B01-317; 10941 6962399-26.2 13.625" DIAMETER; 83130 6962399-26.2 13.625" DIAMETER. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.

Similar Contracts

Same NAICS industry code

PUMP,AXIAL PISTONS — 4320014299248 — SPRMM127QGA30

Solicitation # SPRMM127QGA30

Solicitation SPRMM127QGA30, issued by NAVSUP Weapons Systems Support for the Department of the Navy, is a fixed-price procurement for the manufacture of axial piston pumps. The contract covers two specific National Item Identification Numbers: CLIN 0001 (NIIN 014299248) and CLIN 0002 (NIIN 014299251). This is a Total Small Business Set-Aside acquisition where the award will be made to the responsible offeror providing the lowest priced, technically acceptable offer. Technical acceptability is based on compliance with solicitation instructions and the absence of exceptions to the terms. Evaluation also considers item, price, and supplier risk via the Supplier Performance Risk System. The contract mandates strict adherence to quality and technical standards, requiring a quality system compliant with ISO 9001. All items must be mercury-free to prevent corrosion and toxicity risks on submarines and surface ships. Physical identification and marking must follow MIL-STD-129, while preservation and packaging must comply with MIL-STD-2073. Inspection and acceptance are conducted at the origin, specifically at the contractor or subcontractor plant. Administrative requirements include electronic invoicing through PIEE-WAWF and compliance with various trade and domestic preferences, including the Buy American-Balance of Payments Program. Offerors who are not the original equipment manufacturer must provide the OEM CAGE code and part number to be considered.

SPRMM1 DLA Mechanicsburg

POSTED

about 12 hours ago

DEADLINE

Supplier of Circulating Fans (P/N 2673213-P4)This subcontract involves the manufacture or sourcing of 18 circulating fans, part number 2673213-P4, to support prime contractors delivering on DLA Troop Support contracts. The units must strictly conform to Basic Drawing NR 10001 2673213, Revision L, and be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. The supplier is required to adhere to rigorous quality and safety standards, including Critical Application Item quality assurance and DFARS 252.223-7001 regarding hazardous materials. Additionally, all packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The opportunity is categorized under NAICS code 333996 for the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

Supply of Tube Axial Fans (NSN 4140016054003)This subcontract involves the procurement of 42 Tube Axial Fans, identified by NSN 4140016054003, to support prime contractors fulfilling DLA supply contracts. The hardware must be packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. Delivery of the units is designated as FOB Origin. The contract is associated with the Department of Defense, specifically the DDSP New Cumberland Facility, with the place of performance located in New Cumberland, Pennsylvania. The procurement falls under NAICS code 333996, with a response deadline set for November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

Manufacture and Supply of Centrifugal Fan (NSN 4140-00-289-9235)This subcontract involves the manufacture and supply of one AC Centrifugal Fan, part number CC5A4W6CW-NS, for prime contractors supporting Department of Defense supply contracts. The unit must be fabricated to 440 volts, 3 phase, 60 cycles specifications in accordance with TDP Rev A Gen 1 and MIL-PRF-19004B(1). All items must feature markings compliant with MIL-STD-130N and MIL-STD-129, and the use of additive manufacturing is strictly prohibited. The contractor is required to ensure full compliance with the Buy American Act and the Berry Amendment. The final deliverable consists of one completed and packaged fan delivered FOB Origin. This requirement is managed through the DDSP New Cumberland Facility under NAICS code 333996, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

Manufacturing of Hand-Driven Hydraulic Ram PumpsThis subcontract involves the manufacturing of 66 complete hand-driven hydraulic ram pump assemblies under NSN 4320-01-460-3685 for the DLA Weapons Support Nuclear Reactor Program. The scope of work requires precision machining and assembly conducted in strict accordance with restricted source engineering drawings and design control activity specifications. To meet the rigorous standards of this critical application, the contractor must ensure full mercury-free compliance and perform all necessary quality testing. The project is designated as a Total Small Business Set-Aside under NAICS code 333996 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must adhere to the established timeline, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-1719

Solicitation SPE7M1-27-T-1719 is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of two rotary pumps, identified by NSN 4320014850766 and Oberdorfer Foundries Inc part number OBN990RS15. This item is designated as a Navy field level reparable item, requiring configuration control per MIL-STD-973. The contract specifies a delivery window of 20 days after the order is placed, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The procurement includes strict technical and quality requirements, incorporating the DLA Master List of Technical and Quality Requirements and prohibiting the use of Class I ozone depleting chemicals. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act and cybersecurity standards under DFARS 252.204-7012. Quotes are to be submitted via DIBBS, and the government may utilize a HUBZone price evaluation preference for the award.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M0-27-T-0822

Solicitation SPE7M0-27-T-0822 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of five spring loaded shaft seal assemblies. The required items are identified by NSN 4320013670755 and manufacturer part number 5290-4017 from Fluid Conditioning Products, Inc. This is designated as a critical application item. The delivery is specified as FOB Origin with a required delivery date of October 28, 2026, and must be shipped to the NAVAIR Voyage Repair Team at Naval Station Mayport, Florida. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates various FAR and DFARS clauses covering fixed-price changes, destination inspection, and the Buy American Act. Special requirements include the prohibition of mercury and hexavalent chromium, as well as stringent cybersecurity compliance under DFARS 252.204-7012. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system. Quotations are due by November 9, 2026, and may be submitted through DIBBS.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

PUMP, HYDRAULIC RAM, HAN

Solicitation # SPE7M2-27-T-0508

This solicitation, issued by the DLA Weapons Support Nuclear Reactor Program under solicitation number SPE7M2-27-T-0508, is for the procurement of 66 hand-driven hydraulic ram pumps (NSN 4320-01-460-3685). The requirement is designated as a critical application item and is a restricted source item requiring engineering source approval by the government design control activity. The procurement is a total small business set-aside under NAICS code 333996, with a required delivery date of June 29, 2027, and a delivery lead time of 220 days after receipt of order. Shipping is established as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including DLA packaging requirements (RP001), MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. A specific restriction is placed on the use of mercury or mercury-containing compounds, except where functionally required. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with the Buy American Act and Berry Amendment. All quotations must be submitted through the DLA Internet Bid Board System (DIBBS) by November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 23 hours ago

DEADLINE

PUMP, HYDRAULIC

Solicitation # SPE7M1-27-T-1773

Solicitation SPE7M1-27-T-1773, issued by the DLA Weapons Support Maritime Supply Chain, is a request for quotations for six hydraulic pumps under NSN 4320015210220. The requirement is designated as a critical application item and is a total small business set-aside under FAR 19.5. Delivery is required within 161 days after order, with a need ship date of April 20, 2027, and a final required delivery date of April 27, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. A critical environmental restriction prohibits the use or incorporation of Class I ozone depleting chemicals in any delivered items. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The procurement is subject to the Buy American and Balance of Payments Program and includes various federal clauses regarding cybersecurity, safeguarding covered defense information, and the prohibition of certain defense telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

IMPELLER, PUMP, CENTRIFU

Solicitation # SPE7M1-27-T-1771

Solicitation SPE7M1-27-T-1771 is a fixed-price contract issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one centrifugal pump impeller, identified by NSN 4320-01-642-5300 and Carver Pump Company part number 002-09N-C05-318-7.875. The item is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of April 17, 2027, and a lead time of 161 days after order. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following DLA requirement RP001. Technical and quality standards are governed by the DLA Master List (RA001), and specific restrictions are placed on the use of mercury per NAVSEA 5100-003D. Notably, parts produced via additive manufacturing are ineligible for award. The agreement incorporates various FAR and DFARS clauses, including the Buy American Act, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Wastewater Collection System – Suction Lift Pump Station Equipment Preselection

Solicitation # 77267

The City of Montpelier, through its Department of Public Works, is seeking proposals for the prequalification and vendor selection of wastewater collection suction lift pump systems. The objective is to establish a standard manufacturer and supplier to provide the basis of design for the procurement of equipment, including pump skids and appurtenances, for the replacement, rehabilitation, and retrofit of the city's eight sewer pump stations. Proposals must be submitted electronically to [email hidden] by 3:00 PM local time on December 3, 2026, with any requests for clarification submitted by November 20, 2026. The selection process involves evaluating technical performance specifications and may include manufacturing site visits. The City reserves the right to modify its selection if pricing or service levels fail to meet industry standards. Proposed initial capital purchase costs must remain valid for 60 days following the RFP closing date. Compliance is required with the Build America Buy America Act, US EAP State Revolving Fund American Iron and Steel requirements, and 2 CFR 200.216 regarding prohibited telecommunications and video surveillance equipment. Future contracts may be structured using EJCDC 2013, 2018, or 2020 documents, amended to meet Vermont CWSRF or USDA Rural Development funding program requirements.

Department of Economic Development

POSTED

DEADLINE

in about 1 month

Axial Piston Pump Supplier (NSN 4320015236824)This subcontract involves the supply of two axial piston pumps for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The pumps must strictly adhere to NSN 4320015236824 specifications, with a specific prohibition against the use of additive manufacturing. The supplier is required to comply with the Buy American Act and the DLA Master List of Technical and Quality Requirements, ensuring all items are packaged according to MIL-STD-2073-1E and MIL-STD-129 standards for delivery to DLA Distribution San Joaquin in Tracy. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333996. Interested parties must submit their responses by November 9, 2026, to meet the requirements of the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

Pressure Switch Component SupplierThe Pressure Switch Component Supplier subcontract involves providing essential raw materials and sub-components to prime contractors manufacturing pressure switches for DLA Land and Maritime. The scope of work includes the delivery of high-grade alloys, specialized polymers, conductive materials, springs, electronic contacts, and specialized seals. All supplied materials must adhere to strict performance tolerances and specific coating requirements to ensure operational integrity. To maintain quality standards, the supplier is required to provide comprehensive material certifications and Certificates of Conformance for all deliveries. The contract falls under NAICS code 335999 and supports the Department of Defense. Interested parties should note the response deadline of November 4, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Pressure Switch Manufacturer (NSN 5930-01-324-5328)This subcontract involves the manufacture and supply of pressure switches, specifically NSN 5930-01-324-5328, for prime contractors supporting DLA Land and Maritime hardware. The selected provider must utilize precision machining and assembly equipment to fabricate these switches in strict accordance with military specifications or approved technical data. A critical requirement of the contract is the submission of application packages through the DLA Weapons Support Alternate Offer/Source Approval Request Program to obtain AMC 3C approval. This opportunity falls under NAICS code 335313 and is managed by the Department of Defense.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Switch, Pressure

Solicitation # CM26239122

DLA Land and Maritime, specifically the FMS Tactical LTC Team at DLA Weapons Support - Columbus, is conducting a sources-sought market survey for the procurement of Pressure Switches under NSN 5930-01-324-5328. The agency is seeking information from potential vendors regarding delivery timelines, quantity capabilities, and pricing structures to determine the feasibility of an Indefinite Delivery Contract with a proposed three-year base period and subsequent one-year option periods. The government is specifically looking for data on commercial availability and is requesting drawings or bills of materials to identify similarities between commercial and military equivalents. The current approved source for this item is Cameron Energy Services Corp, identified by CAGE code 05991 with multiple associated part numbers. Due to the AMC 3C designation, this part requires engineering source approval to maintain quality, as the approved sources retain essential technical data and manufacturing knowledge. Other companies wishing to be qualified as approved sources must submit an application package through the DLA Weapons Support Alternate Offer/Source Approval Request Program to demonstrate their ability to manufacture the product to the same or better quality than the original equipment manufacturer. Responses should be directed to Contract Specialist Caitlin Ferry by the deadline of November 4, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

INSULATING COMPOUND,ELECTRICAL

Solicitation # CM26161009

This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

HEADSET-MICROPHONE : NSN 5965-01-204-8505

Solicitation # SPE7MX26RX089

This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7MX26RX102

DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.

POSTED

DEADLINE

MULTI NSN DIESEL ENGINE

Solicitation # CM26259595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Inspection ServicesThis subcontract opportunity with DLA Land and Maritime involves providing high-precision non-destructive testing and inspection services for prime contractors on manufacturing projects. The selected provider will be responsible for verifying Critical Safety Item characteristics using X-ray, Ultrasonic, or Magnetic Particle equipment in strict accordance with MIL-STD 1916. Key deliverables include detailed inspection reports and certifications of compliance to ensure all safety and quality standards are met. To be eligible, contractors must possess a valid CAGE code and ensure all equipment is calibrated to Government standards. The work is performed in Columbus, Ohio, under NAICS code 541380. Interested parties must submit their responses by October 29, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

43--SLEEVE,SHAFT,PUMP

Solicitation # SPE7M425T7543

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

43--RING,WEARING

Solicitation # SPE7M125T8515

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

43--PUMP,ROTARY

Solicitation # SPE7M125T8492

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

43--SEAL ASSEMBLY,SHAFT

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

43--PUMP,HYDRAULIC RAM,

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

43--PUMP UNIT,ROTARY

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

43--RING,LANTERN

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

43--SEAL ASSEMBLY,SHAFT

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

PUMP UNIT, CENTRIFUGAL

Sflc Procurement Branch 1(00080)

POSTED

over 1 year ago

DEADLINE

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

Stern Gate Parts

Mid Atlantic Reg Maintenance Ctr

POSTED

over 1 year ago

DEADLINE

Head, Hydraulic Motor

DLA Land Warren

POSTED

over 1 year ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS