Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

44--HEATER,WATER,ELECTR

Active
SPE8E826T5112Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense, through DLA Troop Support, is soliciting quotes for 20 electric water heaters, NSN 4410014107983, under a Small Business Set Aside total contract. The solicitation, numbered SPE8E826T5112, is an RFQ posted on August 6, 2026, with responses due by August 17, 2026. All submissions must be made electronically, and hard copies are not available. The delivery destination is DLA Distribution San Diego, with a required delivery timeline of 125 days after award. Approved sources for this item are limited to two vendors: 74924 720-31753-22 and 74924 723XQ0999. The North American Industry Classification System code is 332410, indicating the procurement falls under heating equipment manufacturing. The procurement is managed by the Office of DLA Troop Support based in Philadelphia, Pennsylvania, and no technical specifications, plans, or drawings are provided. All responsible sources may submit a quote, provided it is received on time and through the required electronic channel. Point of contact for questions is DibbsBSM@dla.mil, with additional information accessible through the SAM.gov portal using the solicitation number.

General Info

20 electric water heaters requested via RFQ for small business set-aside, delivery in 125 days to San Diego.

Agency

Department Of Defense → DLA Troop SupportView Agency

NAICS

332410 - Power Boiler and Heat Exchanger ManufacturingView NAICS

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Troop Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5096, USA
Organization / Agency
Department Of Defense → DLA Troop Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5096, USA
Contacts
contact@example.gov

Full Description

Show more
Proposed procurement for NSN 4410014107983 HEATER,WATER,ELECTR: Line 0001 Qty 20 UI EA Deliver To: DLA DISTRIBUTION SAN DIEGO By: 0125 DAYS ADO Approved sources are 74924 720-31753-22; 74924 723XQ0999. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

NAICS: 332410
New
International
Infrastructure - Invitation to Bid - Taco Heat Exchanger replacement
Solicitation # AB-2026-05512
Alberta Infrastructure, through BGIS, is seeking bids for the supply and installation of one new Taco heat exchanger to replace an existing unit. The solicitation, identified as AB-2026-05512, was posted on August 5, 2026, with a response deadline of August 26, 2026, at 8:00 PM. The work is to be performed in Alberta, and all bids must meet the technical and operational requirements specified for the replacement unit. Kelly Wambold, Operations Manager at BGIS, is the primary point of contact for inquiries related to the bid and can be reached via email at kelly.wambold@bgis.com. The contract opportunity is open to qualified suppliers and contractors capable of delivering and installing a compatible Taco heat exchanger in compliance with Alberta Infrastructure standards.
Infrastructure

POSTED

1 day ago

DEADLINE

in 19 days
View Details
NAICS: 332410
New
DIBBS
Seamless Carbon Steel Pipe Manufacturing & SupplyThe contract mandates the manufacture and supply of seamless carbon steel pipe with a 4-inch diameter and Schedule 80 wall thickness, compliant with ASTM A106 Grade B standards. Each pipe segment must include full heat traceability, certified documentation, and permanent markings applied at intervals of exactly 3 feet to ensure quality control and traceability throughout the supply chain. The materials must meet stringent industrial specifications suitable for high-pressure and high-temperature environments, reflecting the critical nature of the end application. The delivery location is specified as New Cumberland, Pennsylvania, with the zip code 17070-5002, and the procurement is classified as a subcontract under NAICS code 332410, indicating a focus on pipe and tube manufacturing. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, leaving a narrow window for qualified manufacturers to submit proposals. The contracting entity is the Nuclear Reactor Program under the Department of Defense, signaling that the pipe will be used in a defense-related nuclear application where material integrity and regulatory compliance are paramount. There is no set-aside designation, meaning the opportunity is open to all eligible subcontractors without preference for small or disadvantaged businesses. The official inquiry link is provided through the DIBBS portal, serving as the sole platform for submission and communication. All bidders must ensure full adherence to ASTM and marking requirements, as deviations will result in rejection.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332410
New
DIBBS
Hydraulic Accumulator Bladder Manufacturing
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332410
New
DIBBS
Industrial Fluid Cooler Manufacturing and SupplyThe contract seeks the manufacture and delivery of one industrial fluid cooler identified by NSN 4420012633992, classified as a Critical Application Item requiring strict adherence to Department of Defense packaging, technical, and quality standards. The item must be produced to meet exacting military specifications and delivered in full compliance with DLA requirements, ensuring operational reliability under demanding conditions. Performance is mandated at the New Cumberland facility with a ZIP code of 17070-5002, and the work falls under NAICS code 332410 for industrial machinery manufacturing. This is a subcontract opportunity with a posted date of August 5, 2026, and a response deadline of August 17, 2026. The contracting activity is the DDSP New Cumberland Facility under the Department of Defense, and the solicitation is accessible through the DIBBS system under reference number SPE8E826T4978. The nature of the requirement demands a high level of precision and quality control, with no set-aside provisions specified, making it open to qualified subcontractors capable of fulfilling the technical and logistical obligations tied to a critical military component.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332410
New
DIBBS
Supply of 10-Inch Diameter, 0.500-Inch Wall Thickness Carbon Steel Pipe (ASTM A53/A53M, Grade B)The contract calls for the supply of 89 units of carbon steel pipe with a 10-inch diameter and 0.500-inch wall thickness, manufactured to meet ASTM A53/A53M Grade B specifications and constructed using a welded process. All units must be marked and packaged in full compliance with MIL-STD-129 standards to ensure proper identification and handling throughout the supply chain. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designated by the SBA, meaning only small businesses qualify to respond. The NAICS code 332410 applies to pipe and tube manufacturing, aligning the requirement with industrial production capabilities. Performance of the contract is designated for Bremerton, Washington, with a zip code of 98314-6001, and the submission deadline is August 17, 2026. The contract is posted under the Department of Defense’s Construction & Equipment MRO SVC I organization, indicating its use for military maintenance, repair, and operations purposes.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332410
New
DIBBS
Galvanizing and Corrosion Protection Services
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332410
New
DIBBS
Supply of Industrial Boiler Auxiliary Coil (COTS Item)The contract calls for the procurement and delivery of a single industrial boiler auxiliary coil identified by NSN 4410004808052, classified as a commercial off-the-shelf item. The supplier must ensure full compliance with military packaging and labeling standards as well as all applicable hazardous material handling regulations to meet Department of Defense specifications. The item is intended for performance at a location in San Diego, California, with a zip code of 92136-3581. This solicitation is issued as a subcontract under NAICS code 332410 and was posted on August 5, 2026, with a firm response deadline of August 17, 2026. The contracting organization is the Department of Defense through its San Diego office, and interested parties must submit proposals via the DIBBS platform using the provided link.
SAN DIEGO

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332410
New
DIBBS
COOLER, FLUID, INDUST
Solicitation # SPE8E8-26-T-5074
The contract is for the procurement of three industrial fluid coolers identified by NSN 4420-15-019-8664 under solicitation SPE8E8-26-T-5074, issued by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 167 days after award, and responses must be submitted by August 17, 2026, with the solicitation posted on August 5, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The primary point of contact is Alexis Selby, reachable via email and phone, with performance occurring at New Cumberland, Pennsylvania, 17070-5002.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332410
New
DIBBS
COOLER, FLUID, INDUSTRIA
Solicitation # SPE8E8-26-T-4995
This contract specifies the procurement of one industrial fluid cooler with NSN 4420-01-374-7946 and part number 250400G1, sourced from Curtiss-Wright Electro-Mechanical Corp and Siemens Energy Inc, under solicitation SPE8E8-26-T-4995. The item is classified as a critical application component and must comply with strict packaging and handling standards including MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Delivery is due in 167 days FOB origin with zero tolerance for quantity variance, inspection and acceptance occurring at destination. The contract prohibits intentional introduction of mercury or mercury-containing compounds into the product except for specific exempted applications such as batteries, fluorescent lights, and specified instrumentation, all of which must meet additional containment requirements per NAVSEA 5100-003D. Packaging must adhere to DLA packaging requirements, and the unit is to be shipped to the DLA Distribution facility in New Cumberland, PA. The contract is a small business set-aside under NAICS code 332410 with a response deadline of August 17, 2026, and a required ship date of February 1, 2027, ensuring alignment with defense logistics timelines.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332410
New
DIBBS
CORE ASSEMBLY, FLUID
Solicitation # SPE8E8-26-T-4977
This contract pertains to the procurement of a CORE ASSEMBLY, FLUID, identified by NSN 4420013389731 and part numbers 411612090001 and 512612090001, with a quantity of two units. The items must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and mercury or mercury-containing compounds are strictly prohibited from intentional use or direct contact with the hardware, except for specific exemptions such as functional mercury in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must meet DLA’s packaging guidelines. The delivery is FOB origin with a 167-day delivery timeline, requiring shipment to the designated receipt warehouse in Tracy, California, and the original required delivery date is July 30, 2027, though the need ship date is February 1, 2027. The contract is issued under solicitation SPE8E8-26-T-4977, which is a total small business set-aside under NAICS code 332410, with unit pricing and total value structured per the CLIN format. Transportation instructions and freight shipping details are governed by DLA procedural notes C19 and C20, and all supplies must be delivered with government identification removed if not accepted.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332410
New
DIBBS
CORE ASSEMBLY, FLUID
Solicitation # SPE8E8-26-T-5012
The contract pertains to the procurement of one unit of a Core Assembly, Fluid Cooler with NSN 4420-01-504-5631 under purchase request 7017757897, requiring delivery within 167 days after order. The solicitation number is SPE8E8-26-T-5012, issued on August 5, 2026, with a response deadline of August 17, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, with NAICS code 332410 for Machine Shop, Turned Product, and Screw Machine Product Manufacturing. The contracting activity is managed by the Department of Defense through the San Diego office, with the place of performance located at 92136-3581. Compliance is mandated with DLA Packaging Requirements for Procurement and all referenced technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Government identification must be removed from any non-accepted supplies as per RQ011. Primary point of contact for the solicitation is Alexis Selby, reachable via email and phone provided.
SAN DIEGO

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332410
New
DIBBS
CORE ASSEMBLY, FLUID CO
Solicitation # SPE8E8-26-T-4988
The contract pertains to the procurement of a Core Assembly, Fluid Cooler with NSN 4420-01-327-8376, for a single unit under Purchase Request 7017757628. Delivery is required within 167 days after contract award, and the solicitation number is SPE8E8-26-T-4988 with a response deadline of August 17, 2026. The procurement is governed by DLA Packaging Requirements and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue or award date depending on acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except for specific, approved uses such as functional mercury in batteries, fluorescent lights, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and have a secondary containment boundary compliant with NAVSEA 5100-003D. The contractor is Xchanger Manufacturing Corp in Oakland, CA, and the contract falls under NAICS code 332410 with performance at the DLA New Cumberland Facility in Pennsylvania. Covered Defense Information may apply, and all data handling must comply with federal security protocols. The point of contact is Alexis Selby, reachable via email and phone provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DLA Troop Support

Same awarding agency

NAICS: 541380
New
Federal
Quality Assurance and Regulatory Compliance Services
Testing Laboratories and Services

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 424210
New
Federal
Domestic Medical Glove Supply and Distribution
Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
Federal
U.S.-Based Nitrile Exam Glove Manufacturing
All Other Rubber Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
Federal
17--ADAPTER,GROUND HANDLIN
Solicitation # SPE8EF26T1601
The U.S. Department of Defense, through DLA Troop Support, has issued a small business set-aside solicitation for 396 adapter, ground handling units identified by NSN 1730013551977. The requirement is for delivery to the Naval Air Systems Command within five days of award, and all quotes must be submitted electronically through the SAM.gov platform. The solicitation, numbered SPE8EF26T1601, was posted on August 6, 2026, with a response deadline of August 17, 2026, and is classified as a combined solicitation under NAICS code 336413, which pertains to aircraft and parts manufacturing. Only small businesses are eligible to compete for this contract, as it is a total small business set-aside, ensuring opportunities for qualified small firms. Digital access to technical specifications and drawings is provided; no hard copies are available. The primary point of contact for inquiries is listed via email, with guidance directing potential respondents to the official DIBBS portal or the SAM.gov link for full solicitation details. Performance location remains unspecified beyond the delivery destination.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333992
New
Federal
34--ELECTRODE,WELDING
Solicitation # SPE8E626T3994
The U.S. Department of Defense, through DLA Troop Support, is soliciting quotations for 1,701 units of NSN 3439004977560, ELECTRODE,WELDING, under solicitation number SPE8E626T3994. This procurement is a Small Business Set Aside, total, and is exclusively open to small businesses as defined by the SBA, with the NAICS code 333992. All responses must be submitted electronically by the deadline of August 17, 2026, and hard copies are not accepted. The delivery location is W1A8 DLA DISTRIBUTION, with a required delivery timeline of 91 days after award. Digital access to drawings, military specifications, and standards is provided through official electronic channels, and no physical copies of the solicitation are available. Interested vendors must review the full solicitation on the SAM.gov portal using the provided link, and all inquiries must be directed via email to the designated buyer, as specified in Block 5 of the solicitation document, or through the DIBBS website. The contracting office is located in Philadelphia, Pennsylvania, and the point of contact provides no physical delivery address for performance, indicating the item will be distributed through existing DLA logistical networks.
Welding and Soldering Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339112
New
Federal
65--ANESTHESIA DELIVERY MO
Solicitation # SPE2DS26T314Y
The contract is for the procurement of three units of ANESTHESIA DELIVERY MO with NSN 6515016669532, to be delivered to the COMMANDING OFFICER within five days of award. The only approved source for this item is 6A4F9 124198, and the solicitation is issued as a Request for Quote under number SPE2DS26T314Y, with no hard copies available—only electronic submission is permitted. The opportunity is exclusively set aside for SBA Certified Women-Owned Small Businesses under the WOSB Program, and the NAICS code 339112 applies to this procurement. All responsible sources meeting the WOSB certification criteria may submit quotes, provided they are received electronically before the deadline of August 12, 2026. The solicitation was posted on August 6, 2026, and is managed by DLA Troop Support under the Department of Defense, with the office located in Philadelphia, Pennsylvania. Technical specifications, plans, or drawings are not provided, and all inquiries must be directed via email to the designated point of contact listed in the solicitation document.
Surgical and Medical Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
Federal
69--SHELTER,FIRE,PRACTI
Solicitation # SPE8E526Q0385
The U.S. Department of Defense through DLA Troop Support is soliciting quotes for 501 units of NSN 6930014990605, a fire practice shelter, with 500 units to be delivered within 180 days and one unit to be delivered within 60 days to DLA Dist San Joaquin. This procurement is a Small Business Set Aside under NAICS code 336413, indicating it is restricted to small business concerns, and all responsible sources may submit electronic quotes by the deadline. The solicitation, numbered SPE8E526Q0385, was posted on August 6, 2026, and responses are due by August 13, 2026. Questions regarding the solicitation must be directed via email to the designated point of contact, with additional details accessible through the SAM.gov portal using the provided solicitation number. The contracting office is located in Philadelphia, Pennsylvania.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
Federal
65--REFILL,INDIVIDUAL FIRS
Solicitation # SPE2DS26T321H
The contract seeks the procurement of 200 individual first aid refill units under NSN 6545016643275, with 100 units each to be delivered to the same location, 0304 CS HHC HHC AA REAR DET, within five days of contract award. The approved source for this item is 515E6 81-303-01, and all quotations must be submitted electronically through the solicitation portal; no hard copies are available. The solicitation is a full and open set-aside exclusively for Service-Disabled Veteran-Owned Small Businesses under the FAR 19.14 regulations, with NAICS code 339113 applying to medical supplies and equipment manufacturing. The activity is managed by DLA Troop Support, located in Philadelphia, Pennsylvania, and responses are due by August 12, 2026. The solicitation number is SPE2DS26T321H, posted on August 6, 2026, and all qualified sources may submit quotes if received on time. No technical specs, plans, or drawings are provided, and inquiries must be directed via email to the designated contract officer referenced in the official solicitation document accessible through the provided SAM.gov link.
Surgical Appliance and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333415
New
Federal
41--COOLER UNIT,AIR
Solicitation # SPE8E826T5100
The contract seeks the procurement of two cooler units, air type, identified by NSN 4130012251590, to be delivered to W1A8 DLA DISTRIBUTION within 139 days after award. The approved source for this item is 38450 FCU-H3-3.5KW-LVP, and only electronic quotes will be accepted; hard copies are not available. The solicitation, issued under number SPE8E826T5100, is a combined RFQ with no set-aside classification, open to all responsible sources that submit timely responses. Technical specifications, plans, or drawings are not provided, and bidders must rely on the information in the solicitation document accessible exclusively through the online portal. The solicitation was posted on August 6, 2026, with a response deadline of August 17, 2026, and is managed by DLA Troop Support under the NAICS code 333415. All inquiries must be directed via email to the designated point of contact listed in the solicitation, and further details can be found on the DIBBS website by entering the solicitation number in the global search.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333415
New
Federal
41--COOLING COIL,CONTINUOU
Solicitation # SPE8E826T5108
The U.S. Department of Defense, through DLA Troop Support, is seeking quotes for nine units of a continuous cooling coil with NSN 4130002730814 and one additional unit, both to be delivered to DLA Distribution at location W1A8. The nine-unit requirement has a delivery deadline of 299 days after order award, while the single unit must be delivered within 90 days. All responsible vendors are invited to submit electronic quotes by the response deadline of August 17, 2026, with no set-aside restrictions applied. The procurement is classified under NAICS code 333415, relating to heating equipment manufacturing, and is being managed from the agency’s office in Philadelphia, Pennsylvania. Questions must be directed to the designated point of contact via email, with additional solicitation details available through the official DIBBS portal using the solicitation number SPE8E826T5108.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333415
New
Federal
41--CONDENSING UNIT,REFRIG
Solicitation # SPE8E826T5104
The contract is for the procurement of nine condensing units, refrigerant type, with NSN 4130014428484, and an additional twelve units under a separate line item, both to be delivered to W1A8 DLA DISTRIBUTION within 54 days of award. The only approved source for this item is 66682 RUT510-3, and all quotes must be submitted electronically through the official solicitation portal; hard copies are not available and no specifications, plans, or drawings are provided. The solicitation, identified as SPE8E826T5104, was posted on August 6, 2026, with a response deadline of August 17, 2026, and is classified as a combined solicitation set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14. The procurement is managed by the Department of Defense through DLA Troop Support, with the contracting office located in Philadelphia, Pennsylvania, and all inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339113
New
Federal
42--CYLINDER AND VALVE
Solicitation # SPE8E526Q0387
The U.S. Department of Defense, through DLA Troop Support, is soliciting quotes for 30 units of NSN 4240009492072, CYLINDER AND VALVE, under solicitation number SPE8E526Q0387. This is a Small Business Set Aside, total, with the NAICS code 339113, limiting eligibility to qualified small businesses. The only approved source for this item is 70167, identified by part number 16D17199-4. The delivery location is W1A8 DLA DIST SAN JOAQUIN, with a required delivery timeline of 300 days after award. Quotes must be submitted electronically and received no later than August 13, 2026; hard copies are not available. No specifications, plans, or drawings are provided, and all responsible small business sources are invited to respond if their quote is timely received. The solicitation is posted online via the SAM.gov platform and can be accessed through the provided link, with primary questions directed to the buyer contact listed in the solicitation document or via email at DibbsBSM@dla.mil. The contracting office is located in Philadelphia, Pennsylvania.
Surgical Appliance and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details