HEATER, SPACE, ELECTRIC

HEATER,SPACE,ELECTRIC
HEATER,SPACE,ELECTR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 97403 13217E6150 REVISION NR B DTD 01/01/1939 PART PIECE NUMBER: 13217E6150
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6150 REVISION NR C DTD 01/01/1972 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6151 REVISION NR B DTD 03/28/1974 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6152 REVISION NR DTD 04/07/1969 PART PIECE NUMBER:
TDP Rev A Gen 1
SPE8E8-26-T-5517
SECTION B
IAW REFERENCE DRAWING NR 97403 13217E6161
REVISION NR DTD 10/31/1968
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6162 REVISION NR A DTD 01/26/1972 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6163 REVISION NR A DTD 12/14/1971 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6164 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6165 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6166 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6167 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6168 REVISION NR DTD 04/01/1969 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6170 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6171 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6173 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6174 REVISION NR A DTD 12/14/1971 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6175 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6176 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1
SPE8E8-26-T-5517
SECTION B
IAW REFERENCE DRAWING NR 97403 13217E6177
REVISION NR DTD 10/31/1968
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6178 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6179 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E6180 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E9817 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E9818 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E9819 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E9820 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E9821 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E9822 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13217E9823 REVISION NR DTD 10/31/1968 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 16236 CS4520-0005 REVISION NR DTD 05/06/1974 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 16236 CS4520-0006 REVISION NR DTD 05/06/1974 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRLCOQC26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
SPE8E8-26-T-5517
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018161778 0001 EA 22.000
NSN/MATERIAL:4520001776198
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/01/2027
SPE8E8-26-T-5517
SECTION B
PR: 7018161778 PRLI: 0001 CONT’D
Original Required Delivery Date:06/11/2027
SPE8E8-26-T-5517 NSN/Part Number: 4520-00-177-6198 Quantity: 22 EA Purchase Request: 7018161778QTY: 22 Delivery: 167 days ADO