This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on July 30, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

46--Elastomeric Seals

Awarded

W912ES-14-T-0101Federal

Submission Closed08/08/2014, 04:00:00 PM CDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339991

New

DIBBS

Supply of NAS816-145 Protective Cap-PlugsThis subcontract involves the manufacture and supply of 1,765 protective dust and moisture seal cap-plugs for the DLA Weapons Support Land Supply Chain. The parts must strictly adhere to NAS816 Revision 3 and Part Number NAS816-145. Performance of the contract takes place at Tinker AFB, with a requirement for the supplier to comply with the Buy American Act and the DLA Master List of Technical and Quality Requirements. Quality assurance must be performed according to MIL-STD-1916 or ASQ H1331, while packaging must meet RP001 and MIL-STD-129 standards. The opportunity was posted on November 6, 2026, with a response deadline of November 16, 2026, falling under NAICS code 339991.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Conductive Gasketing Material SupplierThis subcontract involves the supply of 79 units of conductive gasketing material to prime contractors supporting the Defense Logistics Agency Weapons Support Active Devices Division. The supplier is responsible for manufacturing or sourcing materials that adhere to strict technical specifications, ensuring all items are packaged according to RP001 DLA Packaging Requirements and that hazardous materials are managed in compliance with TQ requirement IP025. The contract is categorized under NAICS code 339991 and utilizes the First Destination Transportation program for delivery to Cherry Point. Interested parties must respond by November 16, 2026, to fulfill the requirements of this Department of Defense procurement action.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Gasket Manufacturing and Supply (NSN 5330-01-514-0573)This subcontract involves the manufacture and supply of 42 specialized gaskets for prime contractors supporting the Defense Logistics Agency under the Department of Defense. All units must strictly adhere to the dimensions, material composition, and tolerances specified by NSN 5330-01-514-0573, with packaging performed in accordance with RP001 DLA Packaging Requirements for Procurement. The project falls under NAICS code 339991 and is managed by the DLA Weapons Support Land Supplier Opns Vehicle Spt. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Asbestos-Free Critical Application GasketsThis subcontract involves the manufacture or procurement of 66 asbestos-free gaskets designated as Critical Application Items for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The required components must match NSN 5330006045650 and P/N 2664438. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 339991. Strict quality and logistics standards apply to this order, requiring each item to be packaged in a medium duty, waterproof, greaseproof, and opaque bag. Additionally, all shipments and storage markings must comply with MIL-STD-129. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Gasket Supply (NSN 5330-01-5615441)This subcontract involves the supply of 48 units of Gaskets (NSN 5330-01-5615441) for prime contractors supporting DLA supply contracts. The selected provider is responsible for manufacturing or sourcing the gaskets according to specific technical data and adhering to strict packaging standards, including MIL-STD-2073-1E and the use of waterproof, opaque bags per MIL-DTL-117 to ensure UV protection. To qualify, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and meet rigorous security and certification requirements, including CMMC Level 2, NIST SP 800-171, and the US/Canada Joint Certification Program. The contract is issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance located in New Cumberland.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

O-Ring SupplyThis subcontract involves the supply of preformed O-ring packing for prime contractors working on Department of Defense projects, specifically managed by the DLA Weapons Support Land Supply Chain. The contractor is responsible for sourcing O-rings that match NSN 5331-01-324-8279 and delivering a total of 49 units. All items must be packaged and sealed in medium duty, waterproof, greaseproof, and opaque bags that strictly adhere to MIL-DTL-117, Type II, Class C, Style 1 specifications. The place of performance for this contract is located in New Cumberland, Pennsylvania, under NAICS code 339991.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Specialized Gasket Fabrication (NSN 5330-01-474-1377)This subcontract involves the fabrication of 132 gaskets for prime contractors supporting the Department of Defense, specifically for DLA Weapons Support Land Supplier Opns Vehicle Spt. The gaskets must be manufactured according to NSN 5330-01-474-1377 specifications and utilize asbestos-free materials in compliance with the DLA Master List of Technical and Quality Requirements RA001. All finished products must be delivered with a Certificate of Conformance. To be eligible, the provider must maintain a quality system certified under SAE AS9003 or ISO 9001 and complete a CMMC Level 2 self-assessment. The project falls under NAICS code 339991, with the place of performance located in Tracy, California. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Packing RetainersThis subcontract involves the manufacture or sourcing of 13 packing retainers, identified by NSN 5330-01-406-7075, to support prime contractors for the Department of Defense under DLA Weapons Support. The contractor must ensure all materials are asbestos-free and strictly adhere to MIL-DTL-117, Type II, Class C, Style 1 standards, requiring the items to be packaged in medium duty, waterproof, greaseproof, and opaque bags. Compliance with MIL-STD-129 and MIL-STD-130N for marking is mandatory for all delivered units. The project is categorized under NAICS code 339991, with the place of performance located in New Cumberland. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Gasket Fabrication (NSN 5330-01-505-9338)This subcontract involves the precision fabrication of six gaskets for the Department of Defense, specifically supporting DLA Weapons Support Land projects. The manufacturer must produce the items according to NSN 5330-01-505-9338 technical drawings, utilizing asbestos-free materials as specified in the DLA Master List RA001. Compliance with the Buy American Act is mandatory for this procurement. The contractor is responsible for packaging the finished gaskets in opaque, waterproof, and greaseproof bags in accordance with MIL-DTL-117 and ensuring all markings adhere to MIL-STD-129. Performance will take place in New Cumberland, Pennsylvania. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

O-Ring Component Supply (NSN 5331015068949)This subcontract involves the supply of a specific O-Ring component, identified by NSN 5331015068949, for prime contractors supporting DLA supply contracts. The Department of Defense, specifically the DLA Weapons Support Land Supply Chain, requires one finished unit that adheres to the DLA Master List of Technical and Quality Requirements (RA001). A critical constraint of this agreement is that the component must not be produced using additive manufacturing processes. The contract is categorized under NAICS code 339991, with the place of performance located at FPO 96666. Interested parties must respond by November 16, 2026, to provide the component meeting all technical specifications to the designated government location.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

MIL-SPEC Waterproof/Opaque Packaging ProviderThis subcontract involves providing specialized packaging services for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work focuses on the sealing of O-rings in medium duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1. All deliverables must be individually sealed and marked using industrial systems to ensure they are ready for immediate shipment. Operational requirements mandate adherence to MIL-STD-2073-1E for general packaging and MIL-STD-129 for marking standards. The place of performance for these services is located at Tinker AFB. Interested parties should note the response deadline of November 16, 2026, for this requirement categorized under NAICS code 339991.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of NSN 5935-01-529-9556This subcontract involves the supply of 101 units of NSN 5935-01-529-9556 for prime contractors working on DLA Weapons Support fluid handling projects. The selected provider is responsible for manufacturing or sourcing the components in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001) and specific NSN technical specifications to ensure full compatibility with fluid handling systems. Managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, the contract falls under NAICS code 339991. Performance of the contract will take place in San Diego, California. The solicitation was posted on November 6, 2026, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in 9 days

AI Contract Overview

Solicitation W912ES-14-T-0101, issued by the Department of Defense through the USACE St Paul office, is a total small business set-aside for the procurement of various elastomeric seals, specifically Tainter valve and Miter gate seals. The contract requires the furnishing of Seals Unlimited brand standard molds as raw stock lengths with simple transverse end cuts, with bolt holes to be drilled during installation. The procurement includes a detailed schedule of supplies across CLINs 0001 through 0009, specifying various mold numbers, lengths, and quantities. The seals must be manufactured from molded natural rubber/polyisoprene or neoprene and must contain no reclaimed polymers. Material composition must include reinforcing carbon black, zinc oxide, accelerators, antioxidants, vulcanizing agents, and plasticizers. All products must adhere to strict physical characteristics and quality standards defined by multiple ASTM specifications, covering properties such as compression set, tension, adhesion, effect of liquids, heat and oxygen deterioration, brittleness, and durometer hardness. The final response deadline for this solicitation was extended to August 8, 2014.

General Info

Agency

Department Of Defense → W07V Endist St Paul

Contract Value

$36,450

NAICS

339991 - Gasket, Packing, and Sealing Device Manufacturing

Place of Performance

MN, USA

Set-Aside

SBA

Awardee

SEALS UNLIMITED, INC.

Award Issued Date

08/15/2014, 12:00:00 AM UTC

Documents

amendment

High

rfp

High

rfp

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

5 updates

PhaseAwarded

PostedJul 22

Combined Synopsis

Notice updatedJul 22

Response deadline time changed from 5:00 AM UTC to 9:00 PM UTC on Jul 30, 2014. The point of contact changed.

Notice updatedJul 30

Response deadline changed from Jul 30, 2014 to Aug 8, 2014. The notice description changed.

Deadline changedJul 30

Response deadline time changed from 9:00 PM UTC to 7:00 PM UTC on Aug 8, 2014.

Deadline changedJul 30

Response deadline time changed from 7:00 PM UTC to 9:00 PM UTC on Aug 8, 2014.

Deadline changedJul 30

Response deadline changed from Aug 8, 2014 to Jul 30, 2014.

AwardedAug 15

Contract was awarded

Submission Closed

08/08/2014, 04:00:00 PM CDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W07V Endist St Paul

Contacts2 people available

OfficeSAINT PAUL, MN, 55101-1323, USA

Organization / AgencyDepartment Of Defense → W07V Endist St Paul

Office AddressSAINT PAUL, MN, 55101-1323, USA

Contacts

Jesse Onkka

Kevin P. Henricks

Full Description

1. GENERAL. Furnish elastomeric seals. Seal descriptions are SEALS UNLIMITED brand standard molds. Seals shall be furnished as raw stock lengths, with simple transverse end cuts. Bolt holes will be drilled at installation. 2. REFERENCE SPECIFICATIONS The following American Society for Testing and Materials (ASTM) Standards form a part of this specification to the extent referenced. ASTM D 395(2003) Rubber Property-Compression Set ASTM D 412(2003) Rubber Property in Tension ASTM D 413(2003) Rubber Property-Adhesion to Flexible Substrate ASTM D 471(2005) Rubber Property-Effect of Liquids W912ES-14-T-0101 Page 7 of 59 ASTM D 572 (2004) Rubber Deterioration by Heat and Oxygen ASTM D 2000(2006) Standard Classification System for Rubber Products in Automotive Applications ASTM D 2137(2005) Rubber Brittleness Point of Flexible Polymers And Coated Fabrics ASTM D 2240(2005) Rubber Property-Durometer Hardness 3. ELASTOMERIC SEAL MATERIALS Seals shall natural rubber/polyisoprene or neoprene. Seals be moulded. Seals shall contain no reclaimed polymers and shall include reinforcing carbon black, zinc oxide, accelerators, antioxidants, vulcanizing agents, and plasticizers. Physical characteristics of the seals shall meet the following criteria:

More opportunities from Department Of Defense → W07V Endist St Paul

Same awarding agency

46--Elastomeric Seals

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

Contract not broken down yet

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Department Of Defense → W07V Endist St Paul

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open