Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Non-Destructive Testing (NDT) and Inspection

Active

Federal

Response Deadline11/12/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, titled Marine Non-Destructive Testing (NDT) and Inspection, is issued by the Department of Defense through the W07V Endist St Paul. The project requires the performance of visual and non-destructive inspections of marine hulls for prime contractors working on USACE projects. Specifically, the contractor will be responsible for inspecting underwater hulls, shell plating, structural members, and weld seams while vessels are in dry dock to identify signs of fatigue or corrosion, culminating in the delivery of a formal inspection report. The contract is designated as a total Small Business Set Aside under NAICS code 541380. Interested parties must submit their responses by November 12, 2026, at 4:00 PM. The place of performance is located in zip code 55947.

General Info

DoD small business subcontract for marine hull NDT inspections due November 12, 2026.

Agency

Department Of Defense → W07V Endist St Paul

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MN, 55947

Set-Aside

SBA

Documents

This scope was carved out of W912ES27QA015.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Refurbish and Repair Equipment Barge #774 - La Crescent, MN (UMRM 702.5)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 04:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W07V Endist St Paul

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W07V Endist St Paul

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs visual and non-destructive inspection of marine hulls for prime contractors on USACE projects. Conducts visual inspection of underwater hull, shell plating, structural members, and weld seams while in dry dock to identify corrosion or fatigue. Delivers a formal inspection report.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a qualified industrial hygiene consultant to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, specifically evaluating potential silica dust exposure for 27 students and instructors during activities such as sand handling and brick cutting. The selected consultant will be responsible for performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Key deliverables include a written report, laboratory results, and a prioritized corrective action plan for dust control. This is a fee-for-service subcontracting opportunity open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone firms. Bids must be submitted by November 6, 2026, and must include a bid sheet, completed supplier packet, proof of insurance, and three references for similar projects. Award decisions will be based on best value, evaluating the consultant's qualifications in occupational exposure assessment and their proposed technical approach. The contract requires compliance with Service Contract Labor Standards, FAR regulations regarding small business utilization and debarment disclosure, and strict government confidentiality and security protocols.

Edison Job Corps

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract for First Article Test (FAT) Validation and Certification supports prime contractors on DLA Weapons Support projects. The selected provider will utilize precision measurement equipment to test initial production units, specifically validating bearing tolerances and performance. The scope of work includes coordinating with the Engineering Support Activity for acceptability evaluations and delivering a final FAT Report along with an approved test sample. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in Bremerton, Washington. To ensure quality standards, the contractor must maintain an ISO 9001:2015 quality management system. The opportunity falls under NAICS code 541380, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Critical Safety Item (CSI) Quality Assurance and SamplingThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing independent testing and quality validation for aerospace projects. The selected contractor will be responsible for executing sampling plans according to MIL-STD-1916, ASQ H1331, or MIL-STD-105/ASQ Z1.4 standards. Utilizing CMM and spectroscopy equipment, the contractor must validate Critical Safety Item requirements and ensure compliance with DFARS 252.211-7003, with a preference for ISO/IEC 17025 certification. The primary deliverables for this engagement include detailed inspection reports and sampling certificates. The work is categorized under NAICS code 541380 and will be performed in the 78419-5255 zip code area. Interested parties must submit their responses by the deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Production Lot Testing (PLT) ServicesThis subcontract for Production Lot Testing services supports prime contractors delivering supply contracts for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves executing the Production Lot Test Requirement defined in CLIN 0002, which requires the use of specialized aviation and defense wiring diagnostic equipment to verify branching integrity, insulation, and electrical continuity. All testing must be conducted within a laboratory meeting ISO/IEC 17025 certified standards. The successful contractor is responsible for providing a certification of compliance and a certified test report upon completion. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Aviation Component Quality Assurance and Testing ServicesThe Aviation Component Quality Assurance and Testing Services subcontract involves providing precision measurement, testing, and quality certification for aircraft duct assemblies. Supporting prime contractors for the Department of Defense DLA Weapons Support aviation supply chain, the selected provider will perform dimensional inspections, pressure and leak testing, and material certification verification. All work must be conducted using RT001 compliant calibrated measuring and test equipment, and the contractor is required to maintain ISO 9001:2015 certification to deliver the necessary inspection reports and test certificates. This opportunity is categorized under NAICS code 541380 and will be performed in Broken Arrow, Oklahoma. Interested parties must respond by November 12, 2026, to support the critical quality assurance needs of the DLA Weapons Support Aviation Supply Chain ESOC Buys.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

First Article Testing (FAT) Services for Aircraft SeatThis subcontract involves providing First Article Testing services for aircraft seats to support prime contractors delivering DLA supply contracts. The scope of work requires conducting safety and performance validation on one unit of Lot/Item 1680-01-699-2124 using specialized testing rigs. The selected provider is responsible for coordinating source inspections and developing a formal FAT Report to document the results. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. All deliverables, including the validated test unit and the completed FAT Report, must be submitted within 90 days. The opportunity is categorized under NAICS code 541380, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Third-Party Inspection and SamplingThis subcontract for Third-Party Inspection and Sampling supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent sampling and inspection of Retainer Handles, specifically verifying dimensions and material certifications. Technical requirements include the use of CMM, calipers, and micrometers calibrated to national standards, with sampling conducted according to MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. The scope of work culminates in the delivery of detailed inspection reports and certifications of compliance. This opportunity is managed by the Department of Defense under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must adhere to the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing (FAT) Services involves providing technical testing and certification for prime contractors on DLA supply contracts. The scope of work focuses on conducting structural integrity and ballistic impact tests for NSN 1680-01-161-1182, utilizing high-speed imaging tools and ballistic ranges as mandated by the Specification Control Drawing. The selected provider must hold military-equivalent or ISO/IEC 17025 laboratory accreditation to ensure compliance with quality standards. A comprehensive FAT Report is required as the final deliverable, which must be submitted within 120 days after receipt of order. This effort is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Critical Application Component CertificationThe Critical Application Component Certification subcontract involves providing independent testing and inspection services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The primary scope of work focuses on verifying the structural integrity of Boeing part number 60-3087-2 through dimensional inspection using CMM and Non-Destructive Testing. Performance of these services will take place at Tinker AFB. To qualify, the contractor must maintain NADCAP accreditation and adhere to ISO 9001:2015 and SAE AS9003 standards. Required deliverables include comprehensive inspection reports, quality test data, and a Certification of Conformance. The solicitation was posted on November 3, 2026, with a response deadline of November 12, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace Component Testing and CertificationThis subcontract for Aerospace Component Testing and Certification supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will perform Production Lot Testing and quality validation for prime contractors, ensuring items are verified against the Technical Data Package. Testing must be conducted via random sample selection in accordance with MIL-STD-1916 or ASQ H1331 standards. To be eligible, contractors must hold CMMC Level 2 and JCP Certifications. Required deliverables include material and process certifications, DD Form 1222, and PLT reports following DI-NDTI-80809B guidelines. The performance of this contract is centered in zip code 32212-0103, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

First Article Test (FAT) for Electrical ConnectorsThis subcontract, issued by the DLA Weapons Support Nuclear Reactor Program under the Department of Defense, requires the performance of First Article Testing for electrical connectors. The selected contractor will conduct initial quality and performance validation on the first production unit to ensure full compliance with technical specifications. This process involves coordinating with the Engineering Support Activity and utilizing specific testing and measurement equipment in accordance with quality conformance inspection RQ006 and configuration change management RQ002. The final deliverables for this effort include a comprehensive FAT Report and a validated sample. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in San Diego, California. Interested parties must submit their responses by November 16, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

Annual Hose Testing

Solicitation # 358

The Jefferson Parish Government is soliciting bids for a two-year contract to provide annual hydrostatic hose testing for the Jefferson Parish East Bank Consolidated Fire Department. The contractor is responsible for providing all labor, equipment, materials, and supervision to perform visual inspections and hydrostatic pressure testing on 45,700 feet of 1-3/4 inch hose, 42,640 feet of 2-1/2 inch hose, and 63,550 feet of 4 inch hose. All services must be performed at the Fire Training Center in Bridge City, Louisiana, in strict compliance with NFPA 1962 standards and departmental requirements. The scope includes the removal, testing, and reloading of all in-service and spare hoses, with testing conducted on consecutive days, weather permitting. The selected vendor must provide detailed test reports and proper tagging for each hose section, identifying the specific apparatus and location or spare storage site. Award will be granted to the lowest responsive and responsible bidder. To be considered responsive, bidders must submit all required insurance documentation, as failure to provide final insurance certificates within ten calendar days of the bid opening will result in rejection. All insurance must conform to Jefferson Parish Resolution No. 136353 or No. 141125, and coverage must be maintained throughout the contract term to avoid suspension or termination. Scheduling for these services is coordinated through Richard Parker.

Jefferson Parish Government

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → W07V Endist St Paul

Same awarding agency

Environmental Technical Reporting and Data AnalysisThis subcontract opportunity, titled Environmental Technical Reporting and Data Analysis, supports prime contractors on USACE St. Paul District projects under the Department of Defense. The scope of work involves performing detailed technical analysis of field and laboratory data, interpreting groundwater flow, developing hydrographs, and evaluating detections against EPA Drinking-Water Screening criteria and baseline ranges. The selected provider will utilize hydrogeologic modeling software to produce regulatory-grade deliverables, including Interim Technical Memoranda and Final Sampling and Analysis Reports. The project is categorized under NAICS code 541620 and is designated as a Total Small Business Set Aside. Interested parties must submit their responses by November 18, 2026, for performance in the 55945 zip code area.

Environmental Consulting Services

POSTED

about 13 hours ago

DEADLINE

Environmental Water Analysis Laboratory ServicesThis subcontract opportunity is for Environmental Water Analysis Laboratory Services supporting prime contractors on USACE St. Paul District projects. The selected provider will be responsible for performing Standard Testing and Organic Suite Testing on residential and permanent well samples in strict accordance with project specifications. To qualify, the laboratory must maintain accreditation under the Minnesota Environmental Laboratory Accreditation Program and is required to provide analytical reports and Electronic Data Deliverables as specified in the contract guidelines. This is a total Small Business Set Aside under NAICS code 541380, managed by the Department of Defense for the W07V Endist St Paul agency. Interested parties must submit their responses by November 18, 2026. The performance of these services will be centered in the 55945 zip code area.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

Groundwater and Surface Water Field SamplingThis subcontract opportunity, titled Groundwater and Surface Water Field Sampling, involves providing physical water sample collection services for prime contractors on USACE St. Paul District projects located in Wabasha County, Minnesota. The scope of work includes collecting samples from the Zumbro River, private residential wells, and permanent monitoring wells. All activities must utilize low-flow sampling equipment and adhere to stabilization criteria aligned with MPCA 2026 standards. The selected contractor is responsible for managing water-level measurements and maintaining strict chain-of-custody protocols. Deliverables include the physical samples, completed field forms, and all associated chain-of-custody documentation. This is a total small business set-aside under NAICS code 541620, with responses due by November 18, 2026.

Environmental Consulting Services

POSTED

about 13 hours ago

DEADLINE

Marine Winch and Rigging ServicesThis subcontract for Marine Winch and Rigging Services involves the relocation of Wintec winches and the installation of new rigging for prime contractors on USACE marine projects. The scope of work includes the removal of existing winches, restoration of deck surfaces, and the reinstallation of winches at designated new locations equipped with new 7/8-inch wire ropes to ensure all units are fully operational upon delivery. Managed by the Department of Defense under the W07V Endist St Paul agency, this opportunity is designated as a Total Small Business Set Aside under NAICS code 811310. The project is located in zip code 55947, with a response deadline set for November 12, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

Marine Timber Decking InstallationThis subcontract opportunity, titled Marine Timber Decking Installation, involves providing specialized services for prime contractors on USACE barge projects under the Department of Defense, specifically the W07V Endist St Paul. The scope of work requires the removal of existing wood decking and the installation of new marine-grade timber decking across the vessel surface to ensure a fully completed delivery of the decking system. The project is designated as a total Small Business Set Aside under NAICS code 238990. Interested parties must note the response deadline of November 12, 2026, with performance taking place in the 55947 zip code area.

All Other Specialty Trade Contractors

POSTED

about 13 hours ago

DEADLINE

Marine Electrical Systems InstallationThis subcontract opportunity, managed by the Department of Defense through the W07V Endist St Paul agency, involves the installation of marine electrical systems for USACE projects. The scope of work focuses on the installation of 480-volt three-phase power and winch electrical systems, specifically requiring the use of NEMA 4X/IP66 watertight motors, controllers, and stuffing tubes. All work must adhere to strict regulatory standards, including 46 CFR, IEEE 45, and NEC Article 430, and concludes with comprehensive megger and continuity testing to ensure a fully functional system. The project is designated as a total Small Business Set Aside under NAICS code 238210. Interested parties must submit their responses by November 12, 2026, at 4:00 PM. Performance of the contract will take place in the 55947 zip code area.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 13 hours ago

DEADLINE

Marine Structural Steel Fabrication (Spud Wells)This subcontract opportunity involves marine structural steel fabrication for USACE barge refurbishment projects managed by the Department of Defense, specifically the W07V Endist St Paul. The scope of work requires the removal of existing spud positions, the fabrication of new spud wells, and the welding of these wells into the hull. Additionally, the contractor is responsible for extending or replacing 30 foot spuds with 40 foot spuds and ensuring the final delivery of all installed and positioned components. The project is designated as a total Small Business Set Aside under NAICS code 332312. Interested parties must submit their responses by November 12, 2026, at 4:00 PM. Performance of the contract will take place in the 55947 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 13 hours ago

DEADLINE

Marine Hull Blasting and CoatingThis subcontract opportunity, titled Marine Hull Blasting and Coating, involves providing high-pressure water blasting and industrial painting services for prime contractors on USACE marine projects. The scope of work requires the removal of biofouling and old coatings from hulls and steel decks using high-pressure water blasting, followed by the application of specialized marine-grade paint systems to deliver a fully restored surface. Managed by the Department of Defense under the W07V Endist St Paul agency, this project is designated as a total Small Business Set Aside under NAICS code 238320. The performance of the work is located in zip code 55947. Interested parties must submit their responses by the deadline of November 12, 2026.

Painting and Wall Covering Contractors

POSTED

about 13 hours ago

DEADLINE

Marine Transport and Dry Docking ServicesThis subcontract for Marine Transport and Dry Docking Services involves the haul-out and transport of a steel barge measuring 110 by 26 by 5 feet. The work supports prime contractors on USACE projects located at Lock and Dam 7 in La Crescent, Minnesota. The selected provider must supply barge towing and a dry dock or marine slipway facility to accommodate the vessel for the entire duration of its refurbishment repairs. The scope of work includes the safe delivery of the barge into the dry dock and its subsequent return to the original pickup location once repairs are finished. This opportunity is designated as a Total Small Business Set Aside under NAICS code 488410 and is associated with the Department of Defense through the W07V Endist St Paul agency.

Motor Vehicle Towing

POSTED

about 13 hours ago

DEADLINE

Traffic Signage Design Software ProviderThis subcontract, issued by the Department of Defense under the W07V Endist St Paul agency, involves the provision of specialized traffic-edition design software for prime contractors working on US Army sign shop projects. The scope of work includes the delivery of active licenses and one-year subscriptions for SAi Flexi 3M Traffic Edition and FlexiPRINT & CUT 3M Authorized Traffic Edition v19. To ensure operational readiness, the software licenses must be delivered two weeks before the commencement of printer training. The opportunity is categorized under NAICS code 513210, with a response deadline set for November 16, 2026.

Software Publishers

POSTED

about 13 hours ago

DEADLINE

HP Latex Printing System SupplierThis subcontract, managed by the Department of Defense under the W07V Endist St Paul agency, involves the supply of wide-format printing hardware for prime contractors supporting US Army sign shop projects at Lake Traverse. The scope of work includes the delivery and installation of one HP L730 64 inch Latex Printer, along with HP 831 Ink bundles and HP Latex 3XO Edge Holders. A critical compliance requirement of the agreement is that all hardware with a unit acquisition cost exceeding 5,000 dollars must be marked with Unique Item Identifiers in accordance with MIL-STD-130. The contract falls under NAICS code 423430 and ensures the complete delivery of the installed printing system and its associated consumables.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

HP L730 64 in. Latex Printer

Solicitation # W912ES27QA008

Solicitation W912ES27QA008 is a firm-fixed-price, total small business set-aside contract issued by the Department of Defense, specifically the U.S. Army Corps of Engineers, St. Paul District. The requirement is for the delivery, installation, and training associated with one HP L730 64-inch Latex Printer and SAi Flexi 3M Traffic Edition software for the Lake Traverse Sign Shop in Wheaton, Minnesota. This specific brand and software configuration are required to ensure zero-VOC emissions, compatibility with 3M reflective vinyl, and adherence to MUTCD chromaticity and federal safety standards. The scope of work includes providing a bundle of HP 831 ink, HP Latex 3XO edge holders, a one-year commercial warranty for parts and labor, and two days of training conducted by an HP Certified Technician. The contract stipulates that software must be delivered two weeks prior to printer training, with final delivery and installation completed within 30 calendar days from the date of award. Award will be based on the most advantageous offer, considering specifications, past performance, delivery date, and price, though the government has indicated a willingness to forgo the lowest price to achieve an earlier delivery. Contractors must comply with MIL-STD-130 and MIL-STD-129 for item identification and shipment marking. Invoicing is to be processed through Wide Area WorkFlow (WAWF). The response deadline for quotes is November 16, 2026.

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Medium and Low Voltage Electrical System Testing

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 13 hours ago

DEADLINE

Quality Certification and Data Documentation

DLA Maritime - Portsmouth

POSTED

about 13 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Quality Inspection

Ok DLA Aviation At Oklahoma City

POSTED

about 13 hours ago

DEADLINE

Groundwater Monitoring in Wabasha County, MN

Solicitation # W912ES27QA013

W07V Endist St Paul

POSTED

about 13 hours ago

DEADLINE

Q301--HUSBANDRY ANIMAL -wo/wd, B+3 POP 12/17/2026 - 12/16/2030

Solicitation # 36C26227Q0093

262-NETWORK Contract Office 22 (36C262)

POSTED

about 13 hours ago

DEADLINE

B--USGS Paired Bulk Mineralogy/Clay Analyses

Solicitation # 140GG027Q0021

Usgs Contracting Activity

POSTED

about 13 hours ago

DEADLINE

First Article Testing (FAT) for Indicator Light Filters

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Production Lot Testing (PLT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Contractor Testing Services

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

First Article Testing and Certification Services

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

First Article and Production Lot Testing (FAT/PLT) Services

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Quality Assurance and Certification for Critical Safety Items

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS