Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Critical Application Component Certification

Active

Federal

Response Deadline11/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Critical Application Component Certification subcontract involves providing independent testing and inspection services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The primary scope of work focuses on verifying the structural integrity of Boeing part number 60-3087-2 through dimensional inspection using CMM and Non-Destructive Testing. Performance of these services will take place at Tinker AFB. To qualify, the contractor must maintain NADCAP accreditation and adhere to ISO 9001:2015 and SAE AS9003 standards. Required deliverables include comprehensive inspection reports, quality test data, and a Certification of Conformance. The solicitation was posted on November 3, 2026, with a response deadline of November 12, 2026, under NAICS code 541380.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TINKER AFB, OK, 73145-9031, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2193.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BRACKET, STRUCTURAL COM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent testing and inspection for prime contractors on DLA Weapons Support ASC projects. Conducts dimensional inspection via CMM and Non-Destructive Testing (NDT) to verify Boeing P/N 60-3087-2 structural integrity. Requires NADCAP accreditation and ISO 9001:2015/SAE AS9003. Delivers inspection reports, Certification of Conformance, and quality test data.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a qualified industrial hygiene consultant to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, specifically evaluating potential silica dust exposure for 27 students and instructors during activities such as sand handling and brick cutting. The selected consultant will be responsible for performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Key deliverables include a written report, laboratory results, and a prioritized corrective action plan for dust control. This is a fee-for-service subcontracting opportunity open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone firms. Bids must be submitted by November 6, 2026, and must include a bid sheet, completed supplier packet, proof of insurance, and three references for similar projects. Award decisions will be based on best value, evaluating the consultant's qualifications in occupational exposure assessment and their proposed technical approach. The contract requires compliance with Service Contract Labor Standards, FAR regulations regarding small business utilization and debarment disclosure, and strict government confidentiality and security protocols.

Edison Job Corps

POSTED

about 1 hour ago

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract for First Article Test (FAT) Validation and Certification supports prime contractors on DLA Weapons Support projects. The selected provider will utilize precision measurement equipment to test initial production units, specifically validating bearing tolerances and performance. The scope of work includes coordinating with the Engineering Support Activity for acceptability evaluations and delivering a final FAT Report along with an approved test sample. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in Bremerton, Washington. To ensure quality standards, the contractor must maintain an ISO 9001:2015 quality management system. The opportunity falls under NAICS code 541380, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Critical Safety Item (CSI) Quality Assurance and SamplingThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing independent testing and quality validation for aerospace projects. The selected contractor will be responsible for executing sampling plans according to MIL-STD-1916, ASQ H1331, or MIL-STD-105/ASQ Z1.4 standards. Utilizing CMM and spectroscopy equipment, the contractor must validate Critical Safety Item requirements and ensure compliance with DFARS 252.211-7003, with a preference for ISO/IEC 17025 certification. The primary deliverables for this engagement include detailed inspection reports and sampling certificates. The work is categorized under NAICS code 541380 and will be performed in the 78419-5255 zip code area. Interested parties must submit their responses by the deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Aviation Component Quality Assurance and Testing ServicesThe Aviation Component Quality Assurance and Testing Services subcontract involves providing precision measurement, testing, and quality certification for aircraft duct assemblies. Supporting prime contractors for the Department of Defense DLA Weapons Support aviation supply chain, the selected provider will perform dimensional inspections, pressure and leak testing, and material certification verification. All work must be conducted using RT001 compliant calibrated measuring and test equipment, and the contractor is required to maintain ISO 9001:2015 certification to deliver the necessary inspection reports and test certificates. This opportunity is categorized under NAICS code 541380 and will be performed in Broken Arrow, Oklahoma. Interested parties must respond by November 12, 2026, to support the critical quality assurance needs of the DLA Weapons Support Aviation Supply Chain ESOC Buys.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) Services for Aircraft SeatThis subcontract involves providing First Article Testing services for aircraft seats to support prime contractors delivering DLA supply contracts. The scope of work requires conducting safety and performance validation on one unit of Lot/Item 1680-01-699-2124 using specialized testing rigs. The selected provider is responsible for coordinating source inspections and developing a formal FAT Report to document the results. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. All deliverables, including the validated test unit and the completed FAT Report, must be submitted within 90 days. The opportunity is categorized under NAICS code 541380, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

Third-Party Inspection and SamplingThis subcontract for Third-Party Inspection and Sampling supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent sampling and inspection of Retainer Handles, specifically verifying dimensions and material certifications. Technical requirements include the use of CMM, calipers, and micrometers calibrated to national standards, with sampling conducted according to MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. The scope of work culminates in the delivery of detailed inspection reports and certifications of compliance. This opportunity is managed by the Department of Defense under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must adhere to the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing (FAT) Services involves providing technical testing and certification for prime contractors on DLA supply contracts. The scope of work focuses on conducting structural integrity and ballistic impact tests for NSN 1680-01-161-1182, utilizing high-speed imaging tools and ballistic ranges as mandated by the Specification Control Drawing. The selected provider must hold military-equivalent or ISO/IEC 17025 laboratory accreditation to ensure compliance with quality standards. A comprehensive FAT Report is required as the final deliverable, which must be submitted within 120 days after receipt of order. This effort is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Aerospace Component Testing and CertificationThis subcontract for Aerospace Component Testing and Certification supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will perform Production Lot Testing and quality validation for prime contractors, ensuring items are verified against the Technical Data Package. Testing must be conducted via random sample selection in accordance with MIL-STD-1916 or ASQ H1331 standards. To be eligible, contractors must hold CMMC Level 2 and JCP Certifications. Required deliverables include material and process certifications, DD Form 1222, and PLT reports following DI-NDTI-80809B guidelines. The performance of this contract is centered in zip code 32212-0103, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Pharmaceutical Compliance and Quality AuditorThis subcontract for NHS England Project Revive seeks a Pharmaceutical Compliance and Quality Auditor to perform critical quality audits and compliance checks for prime contractors. The role involves conducting batch testing, auditing supplier manufacturing sites, and verifying certificates of analysis to ensure all operations meet MHRA standards. The successful provider must utilize laboratory testing equipment and adhere to Quality Management Systems such as ISO 9001, and the personnel performing the work must hold a valid pharmacist licensure. Key deliverables for this engagement include the production of quality assurance reports, compliance certifications, and detailed audit logs. Interested parties must respond by November 30, 2026, in accordance with the solicitation posted on November 3, 2026. The contract falls under NAICS code 541380 and is managed directly by NHS England.

POSTED

about 6 hours ago

DEADLINE

Environmental Water Analysis Laboratory ServicesThis subcontract opportunity is for Environmental Water Analysis Laboratory Services supporting prime contractors on USACE St. Paul District projects. The selected provider will be responsible for performing Standard Testing and Organic Suite Testing on residential and permanent well samples in strict accordance with project specifications. To qualify, the laboratory must maintain accreditation under the Minnesota Environmental Laboratory Accreditation Program and is required to provide analytical reports and Electronic Data Deliverables as specified in the contract guidelines. This is a total Small Business Set Aside under NAICS code 541380, managed by the Department of Defense for the W07V Endist St Paul agency. Interested parties must submit their responses by November 18, 2026. The performance of these services will be centered in the 55945 zip code area.

W07V Endist St Paul

POSTED

about 6 hours ago

DEADLINE

Optical Testing and Factory Acceptance Testing (FAT)This small business set-aside subcontract for DLA Land Warren involves providing independent verification and validation of optical units for prime contractors. The scope of work focuses on conducting Factory Acceptance Testing on sample units, performing Scratch and Dig inspections in accordance with MIL-PRF-13830B, and utilizing specialized optical inspection tools to verify alignment and clarity. The selected contractor is responsible for delivering comprehensive FAT Test Reports and official inspection certifications for each lot. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense, with a response deadline set for December 3, 2026.

DLA Land Warren

POSTED

about 6 hours ago

DEADLINE

Metallurgical Testing and Certification ServicesThis subcontract for Metallurgical Testing and Certification Services supports prime contractors on Army Contracting Command projects at the Watervliet Arsenal. The scope of work involves performing comprehensive chemical and mechanical testing on aluminum bronze samples, specifically focusing on yield strength, tensile strength, elongation, and Rockwell Hardness with a minimum requirement of B-95. Chemical analysis must be conducted using spectrometers to verify the precise alloy composition. To ensure quality and compliance, the service provider must maintain ISO/IEC 17025 accreditation and deliver all results via Certified Test Reports in accordance with DD Form 1423. This opportunity is designated as a Total Small Business Set Aside under NAICS code 541380 for the Department of Defense. Responses are due by November 13, 2026.

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Industrial Hand Sprayer Supplier (NSN 3740-01-457-0277)This subcontract involves the supply of two industrial hand sprayers to prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division. The hardware must strictly adhere to NSN 3740-01-457-0277 specifications and include all necessary manufacturer commercial manuals for operation and maintenance. All deliverables must be shipped FOB Origin to Fort Drum, New York, with packaging and marking performed in accordance with MIL-STD-2073-1E and MIL-STD-129. The supplier is required to ensure full compliance with the Buy American Act and the Berry Amendment. This opportunity falls under NAICS code 423830 and was posted on November 3, 2026, with a response deadline of November 12, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

FMS Freight Forwarding and Export LogisticsThis subcontract, titled FMS Freight Forwarding and Export Logistics, involves the transport and delivery of ten aviation component units for prime contractors supporting DLA supply contracts. The scope of work includes coordinating regular FOB Origin shipments to A.J. Worldwide Services in Secaucus, New Jersey, and managing the subsequent international shipping and customs clearance processes for Foreign Military Sales destined for Guvercinlik, Turkey. Managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, the contract requires strict adherence to FAR 52.247-29 and the procurement of necessary export licenses for military hardware. The project falls under NAICS code 488510, with a response deadline set for November 12, 2026.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Rotor Blade Protector Supplier/ManufacturerThis subcontract involves the manufacture or procurement of ten Rotor Blade Protectors, specifically part number 70150-09110-102, for prime contractors supporting DLA supply contracts. The items must be produced in accordance with Sikorsky Corporation aviation specifications and adhere to strict military standards for bare item marking and packaging, specifically MIL-STD-129, MIL-STD-2073-1E, and RP001. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, the contract mandates full supply chain traceability and strict compliance with the Buy American and Balance of Payments Program. Interested parties must respond by November 12, 2026, for this requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Electrical Tachometer Indicator (NSN 6680-01-490-4443)This subcontract involves the supply of one Electrical Tachometer Indicator, specifically Dynalec Corporation part number PK420-1 with NSN 6680-01-490-4443, for prime contractors working on DLA Weapons Support ASC projects. The equipment must adhere to marking code 05 and meet strict quality assurance testing standards per MIL-STD-1916 or ASQ H1331. Additionally, all packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, falling under NAICS code 334517. The completed instrument is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The response deadline for this requirement is November 12, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 1 hour ago

DEADLINE

Synchro Clamp Supplier (NSN 5340-01-725-6835)This subcontract involves the procurement of 110 Synchro Clamps under NSN 5340-01-725-6835 for prime contractors supporting Department of Defense supply contracts. The selected supplier is responsible for manufacturing or sourcing hardware that adheres to strict specifications, including marking requirements per MIL-STD-129 and packaging standards per MIL-STD-2073-1E. All units must be delivered to the DLA Distribution DDSP New Cumberland Facility. To be eligible, the supplier must maintain ISO 9001 or SAE AS9003 quality system certification and ensure full compliance with the Buy American Act. This opportunity is managed by the DLA Weapons Support ASC Supplier Oper OEM Division under NAICS code 332999, with a response deadline set for November 12, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

Blanking Plate Assembly SupplierThis subcontract involves the manufacture or sourcing of four Blanking Plate Assemblies, identified by NSN 4820015602710, to support prime contractors delivering for the DLA Weapons Support ASC. The supplier must adhere to RA001 requirements and ensure full compliance with the Buy American Act. Quality assurance is mandatory, utilizing calibrated test equipment and following either MIL-STD-1916 or ASQ H1331 zero-based sampling standards. All deliverables must be packaged according to ASTM D3951 and MIL-STD-129 specifications. The contract requires the delivery of the completed assemblies within 20 days of the award. Performance will take place at Dover AFB, under the oversight of the Department of Defense.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

Defense-Compliant Packaging and Shipping ServicesThis subcontract for Defense-Compliant Packaging and Shipping Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging of non-hazardous materials according to ASTM D3951 and hazardous materials in compliance with FED-STD-313 and TQ requirement IP025. Additionally, the provider is responsible for marking and labeling all shipments per MIL-STD-129 standards. The contractor must coordinate FOB Origin shipments and ensure the delivery of properly packaged and marked materials to the 127th LRS LGRMM located at Selfridge ANGB. This opportunity is issued by the Department of Defense under NAICS code 488510, with a response deadline of November 12, 2026.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Manufacturer of Specialized Explosive-Rated Foam SegmentsThis subcontract involves the manufacture of high-precision, explosive-rated foam segments for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The selected manufacturer will fabricate four units of NSN 1560016246372 according to OEM part number 162D611707-2004 using industrial cutting equipment. Performance is based at Selfridge ANGB, and the final delivery must include a First Article Test report. To ensure strict quality and security standards, the contractor must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. All products must adhere to the Berry Amendment and undergo quality inspections and First Article Testing in accordance with MIL-STD-1916 or ASQ H1331. The response deadline for this opportunity is November 12, 2026.

All Other Plastics Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract involves the supply of certified aerospace-grade structural alloys specifically required for Boeing part number 60-3087-2. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Order OEM Division, the contract mandates that all raw material stock delivered to the manufacturer must include full traceability and Mill Test Reports. The agreement requires strict adherence to the Buy American Act and the Berry Amendment to ensure regulatory compliance. Performance for this contract is centered at Tinker AFB, with the procurement falling under NAICS code 331210.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 1 hour ago

DEADLINE

Aerospace Structural Bracket FabricationThis subcontract involves the precision CNC machining and fabrication of a critical application structural aircraft bracket, specifically Boeing part number 60-3087-2, for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer is required to use aerospace-grade alloys and adhere strictly to OEM specifications to produce one finished structural component for delivery to Tinker AFB. To qualify for this project, the provider must maintain rigorous industry certifications, including ISO 9001:2015 and SAE AS9003. Additionally, the contract mandates strict security and regulatory compliance with CMMC Level 2 and DFARS 252.204-7012 standards. The opportunity falls under NAICS code 336413 and is managed by the Department of Defense.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Aerospace Packaging and Marking ServicesThis subcontract for MIL-SPEC Aerospace Packaging and Marking Services involves providing specialized packaging, marking, and palletization for high-value aircraft compressor components. Working under the DLA Weapons Support ASC Supplier Oper OEM Division, the contractor must ensure all assemblies are processed in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The scope of work requires the use of MIL-SPEC preservation materials and industrial equipment to prepare shipments for Government-Arranged Transportation. The performance of this contract takes place in Corpus Christi, Texas, with the final delivery destination being the USA DEP Corpus Christi. Classified under NAICS code 488510, the project focuses on delivering fully packaged and marked assemblies that meet rigorous Department of Defense requirements for transit and storage.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Aircraft Compressor Case and Vane Assembly SupplierThis subcontract involves the manufacture and supply of aircraft compressor case and vane assemblies for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for producing components according to NSN 2840-01-301-8860 and Meggitt Defense Systems part number 41322-1, ensuring full compliance with the DLA Master List of Technical and Quality Requirements. The contract requires the delivery of one precision-manufactured assembly on a FOB Origin basis. To be eligible, the contractor must maintain ISO 9001:2015 certification and provide a CMMC Level 2 self-assessment. The work is associated with NAICS code 336412 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with the place of performance located in Corpus Christi, Texas. Responses to this solicitation are due by November 12, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Environmental and Seismic Qualification Testing

Battelle Energy Alliance–doe Cntr

POSTED

about 6 hours ago

DEADLINE

Ultrasonic Testing (UT) Specialist

POSTED

about 6 hours ago

DEADLINE

Medium and Low Voltage Electrical System Testing

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 6 hours ago

DEADLINE

Groundwater Monitoring in Wabasha County, MN

Solicitation # W912ES27QA013

W07V Endist St Paul

POSTED

about 6 hours ago

DEADLINE

B--USGS Paired Bulk Mineralogy/Clay Analyses

Solicitation # 140GG027Q0021

Usgs Contracting Activity

POSTED

about 6 hours ago

DEADLINE

First Article Testing (FAT) for Indicator Light Filters

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Production Lot Testing (PLT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Contractor Testing Services

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS