Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Synchro Clamp Supplier (NSN 5340-01-725-6835)

Active

Federal

Response Deadline11/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement of 110 Synchro Clamps under NSN 5340-01-725-6835 for prime contractors supporting Department of Defense supply contracts. The selected supplier is responsible for manufacturing or sourcing hardware that adheres to strict specifications, including marking requirements per MIL-STD-129 and packaging standards per MIL-STD-2073-1E. All units must be delivered to the DLA Distribution DDSP New Cumberland Facility. To be eligible, the supplier must maintain ISO 9001 or SAE AS9003 quality system certification and ensure full compliance with the Buy American Act. This opportunity is managed by the DLA Weapons Support ASC Supplier Oper OEM Division under NAICS code 332999, with a response deadline set for November 12, 2026.

General Info

Procure 110 Synchro Clamps for DoD by November 12, 2026, meeting MIL-STD specifications.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2192.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CLAMP, SYNCHRO

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies 110 units of Synchro Clamps for prime contractors delivering DLA supply contracts. Manufactures or sources hardware meeting NSN 5340-01-725-6835 specifications. Performs marking per MIL-STD-129 and packaging per MIL-STD-2073-1E. Requires ISO 9001 or SAE AS9003 quality system certification and Buy American Act compliance. Delivers 110 units to DLA Distribution DDSP New Cumberland Facility.

Similar Contracts

Same NAICS industry code

SAE-AMS-WW-T-700 Aluminum Tube SupplierThis subcontract involves the supply of Aluminum 5052-0 tubing for prime contractors supporting Department of Defense contracts via the DLA Receiving Officer at Naval Base Coronado. The requirement specifies 144 inches of tubing with a 0.750 inch outer diameter and 0.035 inch wall thickness, adhering to SAE-AMS-WW-T-700/4 specifications. To ensure consistency, all provided material must originate from the same heat lot. The supplier is responsible for packaging and marking materials according to ASTM D3951, RP001, and MIL-STD-129 standards. Full material certifications must be provided upon delivery, which is handled on a FOB Destination basis. The opportunity is categorized under NAICS code 332999 and is associated with a performance location in zip code 92135-7058.

DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

about 1 hour ago

DEADLINE

Supply of Safety Relief Valve Disk (NSN 4820012590343)This subcontract involves the supply of one specialized safety relief valve disk, identified by NSN 4820012590343, for prime contractors supporting Defense Logistics Agency supply contracts for the USS BATAAN LHD 5. The component must strictly adhere to Emerson Automation Solutions part number [phone hidden] specifications and comply with the Buy American Act and the DLA Master List of Technical and Quality Requirements. The contractor is responsible for ensuring that packaging and marking meet MIL-STD-2073-1E and MIL-STD-129 standards, respectively. The single unit is to be delivered to FOB Destination. This procurement falls under NAICS code 332999 and is managed by the Department of Defense through the Defense Logistics Agency.

Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

Intake Air Cleaner Filter Element SupplierThis subcontract opportunity is for the manufacture and supply of one intake air cleaner filter element, identified as NSN 2940-00-910-3065, to support prime contractors for the DLA Weapons Support LSO Combat Vehicles and Armament. The required filter elements must be constructed from pleated paper filtering media to specific dimensions of 11 inches outer diameter, 13.5 inches height, and 6.75 inches inner diameter. Notably, the use of additive manufacturing is strictly prohibited for this requirement. The contract is designated as a Total Small Business Set-Aside under NAICS code 332999. Awardees must ensure full compliance with the Buy American Act, the Berry Amendment, and military standards MIL-STD-2073-1E and MIL-STD-129. Interested parties must submit their responses by the deadline of November 18, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

Supply of Spacer Kits (NSN 2915-00-569-5052)This subcontract involves the supply of specialized Spacer Kits for prime contractors supporting DLA Aviation supply contracts under the Department of Defense. The selected provider is responsible for manufacturing or sourcing new, unused items that strictly conform to NSN 2915-00-569-5052 and the approved source CAGE code, ensuring all materials are free from deterioration. The contract requires the provider to maintain a Higher Level Quality System and an active SAM registration. Deliveries must be completed within 270 days after receipt of order. The opportunity is categorized under NAICS code 332999 and is managed by the DLA Weapons Support ASC Supplier OE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Supply of Quick Disconnect Coupling Assemblies (NSN 4730-01-691-9257)This subcontract involves the supply of four Quick Disconnect Coupling Assemblies under NSN 4730-01-691-9257 for the DLA Weapons Support Fluid Handling Division. The components are intended for prime contractors supporting the USCG Air Station Sacramento, with the place of performance located in McClellan, California. The contractor is responsible for manufacturing or sourcing the assemblies using traditional manufacturing methods, as additive manufacturing is strictly prohibited. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

Crew Protection Armor FabricationThis subcontract involves the fabrication and supply of 75 units of crew protection armor for the Department of Defense, specifically under the DLA Weapons Support ASC Supplier OE and AF Div. The selected manufacturer must produce armor plating in strict accordance with Specification Control Drawing for NSN 1680-01-161-1182, utilizing precision machining equipment and ballistic-grade materials. A critical requirement of the contract is the execution of First Article Testing to validate the manufacturing process, which must be documented in a detailed FAT Report. To be eligible, the contractor must possess a valid CAGE code. The final deliverables consist of the 75 completed armor units and the comprehensive FAT Report.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Engine Lubricating Oil Cooler ManufacturerThis subcontract opportunity is for the manufacture of 187 engine lubricating oil coolers to support DLA Weapons Support Land Supplier Opns Engines. The selected provider will be responsible for the fabrication, precision machining, and brazing of units in accordance with Basic Drawing NR 19207 12366033 Revision A, MIL-PRF-46170E, and MIL-P-53022B, ensuring all units feature Class 3 Threads and undergo full inspection prior to delivery. The contract is designated as a Total Small Business Set-Aside under NAICS code 332999, with performance located in Anniston. Strict regulatory and quality standards are required for this engagement, including CMMC Level 2, ISO 9001:2015, and full ITAR/EAR compliance. Responses are due by November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 1 hour ago

DEADLINE

Supply of Pad Eyes (NSN 2040014958301)This subcontract involves the manufacture or sourcing of two specialized Pad Eyes under NSN 2040014958301 to support the Department of Defense DLA Weapons Support Maritime Supply Chain. The project requires strict adherence to MIL-STD-129 and DFARS 252.223-7008, specifically prohibiting the use of hexavalent chromium. Performance will take place in Fort Eustis, Virginia. Eligible providers must maintain an active SAM registration and ensure full compliance with the Buy American Act. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026. The contract falls under NAICS code 332999 for miscellaneous fabricated metal product manufacturing.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

Resilient Weapon System Mount Fabrication and AssemblyThis subcontract for the Resilient Weapon System Mount Fabrication and Assembly supports the Department of Defense through the DLA Weapons Support ASC. The project requires the precision machining, fabrication, and final assembly of 209 completed and inspected mount assemblies, each consisting of one resilient mount and two decelerator cones. All work must be performed according to Drawing 1385709 and MIL-M-19863, utilizing CNC machining and specialized testing equipment to ensure strict adherence to shock and vibration specifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 332999, with performance taking place in Tracy, California. Compliance with MIL-STD-129 and MIL-STD-2073-1E is mandatory for all deliverables. Interested parties must have responded by the deadline of November 12, 2026, to provide these critical components for prime contractors.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Precision Fabrication of Identification MarkersThis subcontract involves the precision fabrication of 10 individual identification markers, identified by NSN 7690011222373, for prime contractors on Defense Logistics Agency procurement projects. The markers must be manufactured in accordance with Basic Drawing NR 19207 12307236 and Type I Code M specifications, with a strict prohibition against the use of additive manufacturing. Final acceptance is contingent upon passing a DLA inspection. The project is managed under the Department of Defense and requires strict adherence to cybersecurity standards, specifically CMMC Level 2 and DFARS compliance. Performance will take place in Texarkana, Texas. Interested parties must respond by November 16, 2026, to meet the requirements of this procurement action.

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PLACE

POSTED

about 1 hour ago

DEADLINE

CATCHER ASSEMBLY, GREAS

Solicitation # SPE3SE-27-Q-0068

Solicitation SPE3SE-27-Q-0068 is a small business set-aside request for quotations from the Defense Logistics Agency for the procurement of 55 units of Catcher Assembly, Grease (NSN 7320-01-044-2709). This is a firm fixed price contract with a required delivery date of 30 days after the date of order. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with the FOB, inspection, and acceptance points all designated as destination. Technical requirements are governed by the DLA Master List of Technical and Quality Requirements and basic drawing number 81337 5-13-2553 Revision F. Packaging must comply with ASTM D3951, with palletization following RP001 DLA Packaging Requirements for Procurement and marking and labeling adhering to MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including requirements for hazardous material identification, the Buy American and Balance of Payments Program, and cybersecurity safeguarding of covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors must be registered in SAM and provide a valid CAGE code with their submission.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

PLATE, MOUNTING

Solicitation # SPE7L1-27-T-3280

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Industrial Hand Sprayer Supplier (NSN 3740-01-457-0277)This subcontract involves the supply of two industrial hand sprayers to prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division. The hardware must strictly adhere to NSN 3740-01-457-0277 specifications and include all necessary manufacturer commercial manuals for operation and maintenance. All deliverables must be shipped FOB Origin to Fort Drum, New York, with packaging and marking performed in accordance with MIL-STD-2073-1E and MIL-STD-129. The supplier is required to ensure full compliance with the Buy American Act and the Berry Amendment. This opportunity falls under NAICS code 423830 and was posted on November 3, 2026, with a response deadline of November 12, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

FMS Freight Forwarding and Export LogisticsThis subcontract, titled FMS Freight Forwarding and Export Logistics, involves the transport and delivery of ten aviation component units for prime contractors supporting DLA supply contracts. The scope of work includes coordinating regular FOB Origin shipments to A.J. Worldwide Services in Secaucus, New Jersey, and managing the subsequent international shipping and customs clearance processes for Foreign Military Sales destined for Guvercinlik, Turkey. Managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, the contract requires strict adherence to FAR 52.247-29 and the procurement of necessary export licenses for military hardware. The project falls under NAICS code 488510, with a response deadline set for November 12, 2026.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Rotor Blade Protector Supplier/ManufacturerThis subcontract involves the manufacture or procurement of ten Rotor Blade Protectors, specifically part number 70150-09110-102, for prime contractors supporting DLA supply contracts. The items must be produced in accordance with Sikorsky Corporation aviation specifications and adhere to strict military standards for bare item marking and packaging, specifically MIL-STD-129, MIL-STD-2073-1E, and RP001. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, the contract mandates full supply chain traceability and strict compliance with the Buy American and Balance of Payments Program. Interested parties must respond by November 12, 2026, for this requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Electrical Tachometer Indicator (NSN 6680-01-490-4443)This subcontract involves the supply of one Electrical Tachometer Indicator, specifically Dynalec Corporation part number PK420-1 with NSN 6680-01-490-4443, for prime contractors working on DLA Weapons Support ASC projects. The equipment must adhere to marking code 05 and meet strict quality assurance testing standards per MIL-STD-1916 or ASQ H1331. Additionally, all packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, falling under NAICS code 334517. The completed instrument is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The response deadline for this requirement is November 12, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 1 hour ago

DEADLINE

Blanking Plate Assembly SupplierThis subcontract involves the manufacture or sourcing of four Blanking Plate Assemblies, identified by NSN 4820015602710, to support prime contractors delivering for the DLA Weapons Support ASC. The supplier must adhere to RA001 requirements and ensure full compliance with the Buy American Act. Quality assurance is mandatory, utilizing calibrated test equipment and following either MIL-STD-1916 or ASQ H1331 zero-based sampling standards. All deliverables must be packaged according to ASTM D3951 and MIL-STD-129 specifications. The contract requires the delivery of the completed assemblies within 20 days of the award. Performance will take place at Dover AFB, under the oversight of the Department of Defense.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

Defense-Compliant Packaging and Shipping ServicesThis subcontract for Defense-Compliant Packaging and Shipping Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging of non-hazardous materials according to ASTM D3951 and hazardous materials in compliance with FED-STD-313 and TQ requirement IP025. Additionally, the provider is responsible for marking and labeling all shipments per MIL-STD-129 standards. The contractor must coordinate FOB Origin shipments and ensure the delivery of properly packaged and marked materials to the 127th LRS LGRMM located at Selfridge ANGB. This opportunity is issued by the Department of Defense under NAICS code 488510, with a response deadline of November 12, 2026.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Manufacturer of Specialized Explosive-Rated Foam SegmentsThis subcontract involves the manufacture of high-precision, explosive-rated foam segments for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The selected manufacturer will fabricate four units of NSN 1560016246372 according to OEM part number 162D611707-2004 using industrial cutting equipment. Performance is based at Selfridge ANGB, and the final delivery must include a First Article Test report. To ensure strict quality and security standards, the contractor must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. All products must adhere to the Berry Amendment and undergo quality inspections and First Article Testing in accordance with MIL-STD-1916 or ASQ H1331. The response deadline for this opportunity is November 12, 2026.

All Other Plastics Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

Critical Application Component CertificationThe Critical Application Component Certification subcontract involves providing independent testing and inspection services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The primary scope of work focuses on verifying the structural integrity of Boeing part number 60-3087-2 through dimensional inspection using CMM and Non-Destructive Testing. Performance of these services will take place at Tinker AFB. To qualify, the contractor must maintain NADCAP accreditation and adhere to ISO 9001:2015 and SAE AS9003 standards. Required deliverables include comprehensive inspection reports, quality test data, and a Certification of Conformance. The solicitation was posted on November 3, 2026, with a response deadline of November 12, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 1 hour ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract involves the supply of certified aerospace-grade structural alloys specifically required for Boeing part number 60-3087-2. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Order OEM Division, the contract mandates that all raw material stock delivered to the manufacturer must include full traceability and Mill Test Reports. The agreement requires strict adherence to the Buy American Act and the Berry Amendment to ensure regulatory compliance. Performance for this contract is centered at Tinker AFB, with the procurement falling under NAICS code 331210.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 1 hour ago

DEADLINE

Aerospace Structural Bracket FabricationThis subcontract involves the precision CNC machining and fabrication of a critical application structural aircraft bracket, specifically Boeing part number 60-3087-2, for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer is required to use aerospace-grade alloys and adhere strictly to OEM specifications to produce one finished structural component for delivery to Tinker AFB. To qualify for this project, the provider must maintain rigorous industry certifications, including ISO 9001:2015 and SAE AS9003. Additionally, the contract mandates strict security and regulatory compliance with CMMC Level 2 and DFARS 252.204-7012 standards. The opportunity falls under NAICS code 336413 and is managed by the Department of Defense.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Aerospace Packaging and Marking ServicesThis subcontract for MIL-SPEC Aerospace Packaging and Marking Services involves providing specialized packaging, marking, and palletization for high-value aircraft compressor components. Working under the DLA Weapons Support ASC Supplier Oper OEM Division, the contractor must ensure all assemblies are processed in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The scope of work requires the use of MIL-SPEC preservation materials and industrial equipment to prepare shipments for Government-Arranged Transportation. The performance of this contract takes place in Corpus Christi, Texas, with the final delivery destination being the USA DEP Corpus Christi. Classified under NAICS code 488510, the project focuses on delivering fully packaged and marked assemblies that meet rigorous Department of Defense requirements for transit and storage.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Aircraft Compressor Case and Vane Assembly SupplierThis subcontract involves the manufacture and supply of aircraft compressor case and vane assemblies for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for producing components according to NSN 2840-01-301-8860 and Meggitt Defense Systems part number 41322-1, ensuring full compliance with the DLA Master List of Technical and Quality Requirements. The contract requires the delivery of one precision-manufactured assembly on a FOB Origin basis. To be eligible, the contractor must maintain ISO 9001:2015 certification and provide a CMMC Level 2 self-assessment. The work is associated with NAICS code 336412 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with the place of performance located in Corpus Christi, Texas. Responses to this solicitation are due by November 12, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS