Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing (FAT) Services

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Testing (FAT) Services involves providing technical testing and certification for prime contractors on DLA supply contracts. The scope of work focuses on conducting structural integrity and ballistic impact tests for NSN 1680-01-161-1182, utilizing high-speed imaging tools and ballistic ranges as mandated by the Specification Control Drawing. The selected provider must hold military-equivalent or ISO/IEC 17025 laboratory accreditation to ensure compliance with quality standards. A comprehensive FAT Report is required as the final deliverable, which must be submitted within 120 days after receipt of order. This effort is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

General Info

Subcontract for accredited ballistic and structural testing of NSN 1680-01-161-1182 for DLA.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-Q-0162.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ARMOR, CREW PROTECTI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs technical testing and certification for prime contractors on DLA supply contracts. Conducts ballistic impact and structural integrity tests as defined in the Specification Control Drawing for NSN 1680-01-161-1182 using ballistic ranges and high-speed imaging tools. Requires ISO/IEC 17025 or military-equivalent laboratory accreditation. Delivers a comprehensive FAT Report within 120 days ARO.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a qualified industrial hygiene consultant to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, specifically evaluating potential silica dust exposure for 27 students and instructors during activities such as sand handling and brick cutting. The selected consultant will be responsible for performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Key deliverables include a written report, laboratory results, and a prioritized corrective action plan for dust control. This is a fee-for-service subcontracting opportunity open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone firms. Bids must be submitted by November 6, 2026, and must include a bid sheet, completed supplier packet, proof of insurance, and three references for similar projects. Award decisions will be based on best value, evaluating the consultant's qualifications in occupational exposure assessment and their proposed technical approach. The contract requires compliance with Service Contract Labor Standards, FAR regulations regarding small business utilization and debarment disclosure, and strict government confidentiality and security protocols.

Edison Job Corps

POSTED

about 1 hour ago

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract for First Article Test (FAT) Validation and Certification supports prime contractors on DLA Weapons Support projects. The selected provider will utilize precision measurement equipment to test initial production units, specifically validating bearing tolerances and performance. The scope of work includes coordinating with the Engineering Support Activity for acceptability evaluations and delivering a final FAT Report along with an approved test sample. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in Bremerton, Washington. To ensure quality standards, the contractor must maintain an ISO 9001:2015 quality management system. The opportunity falls under NAICS code 541380, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Critical Safety Item (CSI) Quality Assurance and SamplingThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing independent testing and quality validation for aerospace projects. The selected contractor will be responsible for executing sampling plans according to MIL-STD-1916, ASQ H1331, or MIL-STD-105/ASQ Z1.4 standards. Utilizing CMM and spectroscopy equipment, the contractor must validate Critical Safety Item requirements and ensure compliance with DFARS 252.211-7003, with a preference for ISO/IEC 17025 certification. The primary deliverables for this engagement include detailed inspection reports and sampling certificates. The work is categorized under NAICS code 541380 and will be performed in the 78419-5255 zip code area. Interested parties must submit their responses by the deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Aviation Component Quality Assurance and Testing ServicesThe Aviation Component Quality Assurance and Testing Services subcontract involves providing precision measurement, testing, and quality certification for aircraft duct assemblies. Supporting prime contractors for the Department of Defense DLA Weapons Support aviation supply chain, the selected provider will perform dimensional inspections, pressure and leak testing, and material certification verification. All work must be conducted using RT001 compliant calibrated measuring and test equipment, and the contractor is required to maintain ISO 9001:2015 certification to deliver the necessary inspection reports and test certificates. This opportunity is categorized under NAICS code 541380 and will be performed in Broken Arrow, Oklahoma. Interested parties must respond by November 12, 2026, to support the critical quality assurance needs of the DLA Weapons Support Aviation Supply Chain ESOC Buys.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) Services for Aircraft SeatThis subcontract involves providing First Article Testing services for aircraft seats to support prime contractors delivering DLA supply contracts. The scope of work requires conducting safety and performance validation on one unit of Lot/Item 1680-01-699-2124 using specialized testing rigs. The selected provider is responsible for coordinating source inspections and developing a formal FAT Report to document the results. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. All deliverables, including the validated test unit and the completed FAT Report, must be submitted within 90 days. The opportunity is categorized under NAICS code 541380, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

Third-Party Inspection and SamplingThis subcontract for Third-Party Inspection and Sampling supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent sampling and inspection of Retainer Handles, specifically verifying dimensions and material certifications. Technical requirements include the use of CMM, calipers, and micrometers calibrated to national standards, with sampling conducted according to MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. The scope of work culminates in the delivery of detailed inspection reports and certifications of compliance. This opportunity is managed by the Department of Defense under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must adhere to the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Critical Application Component CertificationThe Critical Application Component Certification subcontract involves providing independent testing and inspection services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The primary scope of work focuses on verifying the structural integrity of Boeing part number 60-3087-2 through dimensional inspection using CMM and Non-Destructive Testing. Performance of these services will take place at Tinker AFB. To qualify, the contractor must maintain NADCAP accreditation and adhere to ISO 9001:2015 and SAE AS9003 standards. Required deliverables include comprehensive inspection reports, quality test data, and a Certification of Conformance. The solicitation was posted on November 3, 2026, with a response deadline of November 12, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

Aerospace Component Testing and CertificationThis subcontract for Aerospace Component Testing and Certification supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will perform Production Lot Testing and quality validation for prime contractors, ensuring items are verified against the Technical Data Package. Testing must be conducted via random sample selection in accordance with MIL-STD-1916 or ASQ H1331 standards. To be eligible, contractors must hold CMMC Level 2 and JCP Certifications. Required deliverables include material and process certifications, DD Form 1222, and PLT reports following DI-NDTI-80809B guidelines. The performance of this contract is centered in zip code 32212-0103, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Pharmaceutical Compliance and Quality AuditorThis subcontract for NHS England Project Revive seeks a Pharmaceutical Compliance and Quality Auditor to perform critical quality audits and compliance checks for prime contractors. The role involves conducting batch testing, auditing supplier manufacturing sites, and verifying certificates of analysis to ensure all operations meet MHRA standards. The successful provider must utilize laboratory testing equipment and adhere to Quality Management Systems such as ISO 9001, and the personnel performing the work must hold a valid pharmacist licensure. Key deliverables for this engagement include the production of quality assurance reports, compliance certifications, and detailed audit logs. Interested parties must respond by November 30, 2026, in accordance with the solicitation posted on November 3, 2026. The contract falls under NAICS code 541380 and is managed directly by NHS England.

POSTED

about 6 hours ago

DEADLINE

Environmental Water Analysis Laboratory ServicesThis subcontract opportunity is for Environmental Water Analysis Laboratory Services supporting prime contractors on USACE St. Paul District projects. The selected provider will be responsible for performing Standard Testing and Organic Suite Testing on residential and permanent well samples in strict accordance with project specifications. To qualify, the laboratory must maintain accreditation under the Minnesota Environmental Laboratory Accreditation Program and is required to provide analytical reports and Electronic Data Deliverables as specified in the contract guidelines. This is a total Small Business Set Aside under NAICS code 541380, managed by the Department of Defense for the W07V Endist St Paul agency. Interested parties must submit their responses by November 18, 2026. The performance of these services will be centered in the 55945 zip code area.

W07V Endist St Paul

POSTED

about 6 hours ago

DEADLINE

Optical Testing and Factory Acceptance Testing (FAT)This small business set-aside subcontract for DLA Land Warren involves providing independent verification and validation of optical units for prime contractors. The scope of work focuses on conducting Factory Acceptance Testing on sample units, performing Scratch and Dig inspections in accordance with MIL-PRF-13830B, and utilizing specialized optical inspection tools to verify alignment and clarity. The selected contractor is responsible for delivering comprehensive FAT Test Reports and official inspection certifications for each lot. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense, with a response deadline set for December 3, 2026.

DLA Land Warren

POSTED

about 6 hours ago

DEADLINE

Metallurgical Testing and Certification ServicesThis subcontract for Metallurgical Testing and Certification Services supports prime contractors on Army Contracting Command projects at the Watervliet Arsenal. The scope of work involves performing comprehensive chemical and mechanical testing on aluminum bronze samples, specifically focusing on yield strength, tensile strength, elongation, and Rockwell Hardness with a minimum requirement of B-95. Chemical analysis must be conducted using spectrometers to verify the precise alloy composition. To ensure quality and compliance, the service provider must maintain ISO/IEC 17025 accreditation and deliver all results via Certified Test Reports in accordance with DD Form 1423. This opportunity is designated as a Total Small Business Set Aside under NAICS code 541380 for the Department of Defense. Responses are due by November 13, 2026.

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Main Rotor Blade Pin FabricationThis subcontract involves the fabrication of 2,008 high-precision main rotor blade pins for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The scope of work includes the precision machining and forming of aerospace-grade alloys to meet DLA Master List tolerances, with strict adherence to MIL-STD-130 for IUID marking and MIL-STD-2073-1E and MIL-STD-129 for packaging requirements. To be eligible, the provider must maintain SAE AS9100 and CMMC Level 2 certifications, as well as DA Form 2410 certification. The project falls under NAICS code 336413 and is managed by the DLA Weapons Support ASC Supplier OE and AF Division, with performance located in zip code 78419-5255.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging of hardware according to ASTM D3951, marking and labeling per MIL-STD-129, and palletization following RP001 standards. All tasks must be executed using MIL-SPEC materials and require a thorough understanding of the DLA Master List of Technical and Quality Requirements to ensure finished shims are ready for FOB Origin shipment. The project is managed under the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in Corpus Christi, Texas. Interested parties should note the response deadline of November 12, 2026, and the classification of the work under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Precision Shim Fabrication (NSN 5365007583674)This subcontract involves the fabrication of 312 precision shims for NSN 5365007583674 to support DLA Weapons Support ASC projects. The selected manufacturer must utilize precision machining or stamping equipment to meet exact technical data specifications. All deliverables must comply with the Buy American Act and the Berry Amendment, with performance taking place in Corpus Christi, Texas. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 quality systems and hold US/Canada Joint Certification Program certification to access ITAR/EAR restricted data. The opportunity is managed by the Department of Defense under NAICS code 332510, with a response deadline set for November 12, 2026.

Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized surface coatings, plating, and finishing services for prime contractors supporting DLA Weapons Support ASC projects at Tinker AFB. The selected provider must apply aerospace-grade finishes in strict accordance with drawing 13873 EI-005749549 and TDP Rev A Gen 2, ensuring all finished components are delivered following MIL-STD-129 labeling requirements. To qualify, contractors must hold ISO 9001 or AS9100 certification and maintain full ITAR and EAR compliance for the handling of technical data. This opportunity falls under NAICS code 332813 and is managed by the Department of Defense. Interested parties must submit their responses by November 12, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 1 hour ago

DEADLINE

Fabrication of Cover Assembly, Pulley Bracket (NSN 1560-00-574-9549)This subcontract involves the precision CNC machining and assembly of one Cover Assembly, Pulley Bracket (NSN 1560-00-574-9549) for prime contractors supporting DLA Weapons Support ASC projects at Tinker AFB. All work must be performed in strict accordance with drawing 13873 EI-005749549 and TDP Rev A Gen 2, with the final deliverable being a single completed and inspected assembly. The contractor must maintain SAE AS9003 or ISO 9001 certification and ensure full compliance with CMMC Level 2 and ITAR/EAR regulations. Additionally, the provider is required to adhere to the Boeing Rights Guard License for all data handling. The solicitation was posted on November 3, 2026, with a response deadline of November 12, 2026.

POSTED

about 1 hour ago

DEADLINE

Supplier of Aircraft Structural Plates (NSN 1560-01-329-3481)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div, requires the provision of one aircraft structural plate under supply number 1560-01-329-3481. The selected supplier is responsible for fabricating or sourcing the plate using aircraft-grade structural metal that adheres to strict technical specifications. Key deliverables include the submission of samples for government lot testing, the provision of OEM documentation, and certification of the country of origin. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336413. Delivery is required via F.O.B. Destination. Interested parties must respond by November 16, 2026, following the posting date of November 3, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Fabrication and Supply of Housing Subassembly (NSN 1680991556516)This subcontract involves the fabrication and supply of five Housing Subassemblies under NSN 1680991556516 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div. The project requires the use of precision CNC machining and aerospace-grade materials that strictly adhere to the Buy American Act and Berry Amendment. Performance will take place in Jacksonville, Florida, under NAICS code 336413. To qualify, the supplier must maintain AS9100 certification and CMMC Level 2 compliance. All delivered units must be inspected and meet rigorous packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. The response deadline for this requirement is November 12, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supplemental Small Arms Fragmentation Armor SupplierThis HUBZone set-aside subcontract involves the supply of finished supplemental small arms fragmentation armor for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or procuring units that strictly adhere to Technical Data Package Rev A Gen 1 and Manufacturer Part Number MA7016122. All deliverables must comply with the Berry Amendment and the Buy American Act, with packaging and marking performed according to MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards. The scope of work requires the delivery of two armor units FOB Destination to Okinawa, Japan, and APO AP. This opportunity is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, falling under NAICS code 332994. Interested parties must meet the response deadline of November 12, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Spacer Kits (NSN 2915-00-569-5052)This subcontract involves the supply of specialized Spacer Kits for prime contractors supporting DLA Aviation supply contracts under the Department of Defense. The selected provider is responsible for manufacturing or sourcing new, unused items that strictly conform to NSN 2915-00-569-5052 and the approved source CAGE code, ensuring all materials are free from deterioration. The contract requires the provider to maintain a Higher Level Quality System and an active SAM registration. Deliveries must be completed within 270 days after receipt of order. The opportunity is categorized under NAICS code 332999 and is managed by the DLA Weapons Support ASC Supplier OE and AF Division.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized surface treatment, plating, or coating services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work specifically requires the application of anodizing, passivating, or plating to Retainer Handles in accordance with the technical data packages for NSN 8140-01-018-3845. To qualify, contractors must utilize industrial plating tanks that comply with aerospace standards and maintain quality certification through either SAE AS9003 or ISO 9001. The project is managed under the Department of Defense and will be performed in New Cumberland, Pennsylvania. Responses are due by November 12, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 1 hour ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Environmental and Seismic Qualification Testing

Battelle Energy Alliance–doe Cntr

POSTED

about 6 hours ago

DEADLINE

Ultrasonic Testing (UT) Specialist

POSTED

about 6 hours ago

DEADLINE

Medium and Low Voltage Electrical System Testing

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 6 hours ago

DEADLINE

Groundwater Monitoring in Wabasha County, MN

Solicitation # W912ES27QA013

W07V Endist St Paul

POSTED

about 6 hours ago

DEADLINE

B--USGS Paired Bulk Mineralogy/Clay Analyses

Solicitation # 140GG027Q0021

Usgs Contracting Activity

POSTED

about 6 hours ago

DEADLINE

First Article Testing (FAT) for Indicator Light Filters

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Production Lot Testing (PLT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS