Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Optical Testing and Factory Acceptance Testing (FAT)

Active

Federal

Response Deadline12/03/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This small business set-aside subcontract for DLA Land Warren involves providing independent verification and validation of optical units for prime contractors. The scope of work focuses on conducting Factory Acceptance Testing on sample units, performing Scratch and Dig inspections in accordance with MIL-PRF-13830B, and utilizing specialized optical inspection tools to verify alignment and clarity. The selected contractor is responsible for delivering comprehensive FAT Test Reports and official inspection certifications for each lot. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense, with a response deadline set for December 3, 2026.

General Info

Agency

Department Of Defense → DLA Land Warren

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MI

Set-Aside

SBA

Documents

This scope was carved out of SPRDL127RA009.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Sight, Bore Optical

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineDec 3

Submission deadline

Response Deadline

12/03/2026, 06:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land Warren

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA Land Warren

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent verification and validation of optical units for prime contractors on DLA Land Warren projects. Conducts Factory Acceptance Testing (FAT) on sample units, performs Scratch and Dig inspections per MIL-PRF-13830B, and verifies optical clarity and alignment using optical inspection tools. Delivers FAT Test Reports and inspection certifications for the lot.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a qualified industrial hygiene consultant to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, specifically evaluating potential silica dust exposure for 27 students and instructors during activities such as sand handling and brick cutting. The selected consultant will be responsible for performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Key deliverables include a written report, laboratory results, and a prioritized corrective action plan for dust control. This is a fee-for-service subcontracting opportunity open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone firms. Bids must be submitted by November 6, 2026, and must include a bid sheet, completed supplier packet, proof of insurance, and three references for similar projects. Award decisions will be based on best value, evaluating the consultant's qualifications in occupational exposure assessment and their proposed technical approach. The contract requires compliance with Service Contract Labor Standards, FAR regulations regarding small business utilization and debarment disclosure, and strict government confidentiality and security protocols.

Edison Job Corps

POSTED

about 1 hour ago

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract for First Article Test (FAT) Validation and Certification supports prime contractors on DLA Weapons Support projects. The selected provider will utilize precision measurement equipment to test initial production units, specifically validating bearing tolerances and performance. The scope of work includes coordinating with the Engineering Support Activity for acceptability evaluations and delivering a final FAT Report along with an approved test sample. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in Bremerton, Washington. To ensure quality standards, the contractor must maintain an ISO 9001:2015 quality management system. The opportunity falls under NAICS code 541380, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Critical Safety Item (CSI) Quality Assurance and SamplingThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing independent testing and quality validation for aerospace projects. The selected contractor will be responsible for executing sampling plans according to MIL-STD-1916, ASQ H1331, or MIL-STD-105/ASQ Z1.4 standards. Utilizing CMM and spectroscopy equipment, the contractor must validate Critical Safety Item requirements and ensure compliance with DFARS 252.211-7003, with a preference for ISO/IEC 17025 certification. The primary deliverables for this engagement include detailed inspection reports and sampling certificates. The work is categorized under NAICS code 541380 and will be performed in the 78419-5255 zip code area. Interested parties must submit their responses by the deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Aviation Component Quality Assurance and Testing ServicesThe Aviation Component Quality Assurance and Testing Services subcontract involves providing precision measurement, testing, and quality certification for aircraft duct assemblies. Supporting prime contractors for the Department of Defense DLA Weapons Support aviation supply chain, the selected provider will perform dimensional inspections, pressure and leak testing, and material certification verification. All work must be conducted using RT001 compliant calibrated measuring and test equipment, and the contractor is required to maintain ISO 9001:2015 certification to deliver the necessary inspection reports and test certificates. This opportunity is categorized under NAICS code 541380 and will be performed in Broken Arrow, Oklahoma. Interested parties must respond by November 12, 2026, to support the critical quality assurance needs of the DLA Weapons Support Aviation Supply Chain ESOC Buys.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) Services for Aircraft SeatThis subcontract involves providing First Article Testing services for aircraft seats to support prime contractors delivering DLA supply contracts. The scope of work requires conducting safety and performance validation on one unit of Lot/Item 1680-01-699-2124 using specialized testing rigs. The selected provider is responsible for coordinating source inspections and developing a formal FAT Report to document the results. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. All deliverables, including the validated test unit and the completed FAT Report, must be submitted within 90 days. The opportunity is categorized under NAICS code 541380, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

Third-Party Inspection and SamplingThis subcontract for Third-Party Inspection and Sampling supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent sampling and inspection of Retainer Handles, specifically verifying dimensions and material certifications. Technical requirements include the use of CMM, calipers, and micrometers calibrated to national standards, with sampling conducted according to MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. The scope of work culminates in the delivery of detailed inspection reports and certifications of compliance. This opportunity is managed by the Department of Defense under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must adhere to the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing (FAT) Services involves providing technical testing and certification for prime contractors on DLA supply contracts. The scope of work focuses on conducting structural integrity and ballistic impact tests for NSN 1680-01-161-1182, utilizing high-speed imaging tools and ballistic ranges as mandated by the Specification Control Drawing. The selected provider must hold military-equivalent or ISO/IEC 17025 laboratory accreditation to ensure compliance with quality standards. A comprehensive FAT Report is required as the final deliverable, which must be submitted within 120 days after receipt of order. This effort is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Critical Application Component CertificationThe Critical Application Component Certification subcontract involves providing independent testing and inspection services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The primary scope of work focuses on verifying the structural integrity of Boeing part number 60-3087-2 through dimensional inspection using CMM and Non-Destructive Testing. Performance of these services will take place at Tinker AFB. To qualify, the contractor must maintain NADCAP accreditation and adhere to ISO 9001:2015 and SAE AS9003 standards. Required deliverables include comprehensive inspection reports, quality test data, and a Certification of Conformance. The solicitation was posted on November 3, 2026, with a response deadline of November 12, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

Aerospace Component Testing and CertificationThis subcontract for Aerospace Component Testing and Certification supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will perform Production Lot Testing and quality validation for prime contractors, ensuring items are verified against the Technical Data Package. Testing must be conducted via random sample selection in accordance with MIL-STD-1916 or ASQ H1331 standards. To be eligible, contractors must hold CMMC Level 2 and JCP Certifications. Required deliverables include material and process certifications, DD Form 1222, and PLT reports following DI-NDTI-80809B guidelines. The performance of this contract is centered in zip code 32212-0103, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Pharmaceutical Compliance and Quality AuditorThis subcontract for NHS England Project Revive seeks a Pharmaceutical Compliance and Quality Auditor to perform critical quality audits and compliance checks for prime contractors. The role involves conducting batch testing, auditing supplier manufacturing sites, and verifying certificates of analysis to ensure all operations meet MHRA standards. The successful provider must utilize laboratory testing equipment and adhere to Quality Management Systems such as ISO 9001, and the personnel performing the work must hold a valid pharmacist licensure. Key deliverables for this engagement include the production of quality assurance reports, compliance certifications, and detailed audit logs. Interested parties must respond by November 30, 2026, in accordance with the solicitation posted on November 3, 2026. The contract falls under NAICS code 541380 and is managed directly by NHS England.

POSTED

about 6 hours ago

DEADLINE

Environmental Water Analysis Laboratory ServicesThis subcontract opportunity is for Environmental Water Analysis Laboratory Services supporting prime contractors on USACE St. Paul District projects. The selected provider will be responsible for performing Standard Testing and Organic Suite Testing on residential and permanent well samples in strict accordance with project specifications. To qualify, the laboratory must maintain accreditation under the Minnesota Environmental Laboratory Accreditation Program and is required to provide analytical reports and Electronic Data Deliverables as specified in the contract guidelines. This is a total Small Business Set Aside under NAICS code 541380, managed by the Department of Defense for the W07V Endist St Paul agency. Interested parties must submit their responses by November 18, 2026. The performance of these services will be centered in the 55945 zip code area.

W07V Endist St Paul

POSTED

about 6 hours ago

DEADLINE

Metallurgical Testing and Certification ServicesThis subcontract for Metallurgical Testing and Certification Services supports prime contractors on Army Contracting Command projects at the Watervliet Arsenal. The scope of work involves performing comprehensive chemical and mechanical testing on aluminum bronze samples, specifically focusing on yield strength, tensile strength, elongation, and Rockwell Hardness with a minimum requirement of B-95. Chemical analysis must be conducted using spectrometers to verify the precise alloy composition. To ensure quality and compliance, the service provider must maintain ISO/IEC 17025 accreditation and deliver all results via Certified Test Reports in accordance with DD Form 1423. This opportunity is designated as a Total Small Business Set Aside under NAICS code 541380 for the Department of Defense. Responses are due by November 13, 2026.

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Land Warren

Same awarding agency

MIL-SPEC Packaging and MarkingThis small business set-aside subcontract involves providing military-grade packaging and marking services for sensitive optical equipment supporting prime contractors on DLA Land Warren projects. The scope of work includes the supply and application of anti-static sealed pouches and protective cushioning, ensuring all units are prepared for shipment and storage in strict accordance with MIL-STD-129 labeling and packaging standards. The contractor is responsible for delivering fully packaged and marked units ready for FOB Destination shipment. This opportunity is categorized under NAICS code 333613 and is managed through the Department of Defense. Interested parties must submit their responses by the deadline of December 3, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Optical System Assembly and AlignmentThis subcontract for Optical System Assembly and Alignment supports DLA Land Warren projects within the Department of Defense. The scope of work involves the final assembly and precision alignment of optical units, specifically integrating lenses and prisms into sight bodies. All work must adhere to part number 10549221 specifications, utilizing specialized equipment such as optical benches and alignment lasers within clean-room environments to deliver fully assembled Bore Optical units. The opportunity is designated as a total Small Business Set Aside under NAICS code 334413. It was posted on November 3, 2026, with a response deadline of December 3, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

Optical Sight Housing FabricationThis small business set-aside subcontract for DLA Land Warren involves the fabrication of optical sight housings. The selected contractor will manufacture mechanical chassis, housings, and mounting hardware for prime contractors, utilizing CNC mills and lathes to perform precision drilling, tapping, and machining of aluminum or steel. The scope of work includes the anodizing or coating of mechanical parts to ensure all deliverables meet the specific requirements outlined in the Technical Data Package. The project is categorized under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by December 3, 2026. The final deliverables for this contract consist of fully machined and finished housings and casings designed for optical alignment.

POSTED

about 6 hours ago

DEADLINE

Optical Element Fabrication and PolishingThis subcontract opportunity with DLA Land Warren involves the fabrication of high-precision optical lenses and prisms for prime contractors. The scope of work requires grinding and polishing optical grade glass to achieve specific geometries and surface qualities that adhere to MIL-PRF-13830B Scratch and Dig standards. To ensure accuracy and quality, the contractor must utilize precision polishing equipment and interferometers for final surface verification. The project is designated as a total Small Business Set Aside under NAICS code 339113. Interested parties must submit their responses by December 3, 2026. The primary objective is the delivery of finished optical elements that meet all specified technical and quality requirements for the Department of Defense.

Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

Sensor Control Electronics & PCB AssemblyThis subcontract, titled Sensor Control Electronics and PCB Assembly, involves the design and fabrication of printed circuit boards and electronic control units for the GS207 sensor system under DLA Weapons Support projects. The scope of work focuses on producing signal processing boards for gimbal stabilization, utilizing clean-room assembly and surface mount technology to deliver fully tested electronic control boards and wiring harnesses. Managed by DLA Land Warren for the Department of Defense under NAICS code 334418, the contract mandates strict adherence to IPC-A-610 and MIL-STD-810 compliance standards. The opportunity was posted on November 3, 2026, with a response deadline set for November 18, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 6 hours ago

DEADLINE

GS207 Gimbal Sensor Component SupplyThis subcontract opportunity, managed by DLA Land Warren for the Department of Defense, involves the supply of precision-engineered components, optical assemblies, and electronic sensor modules. The scope of work specifically supports the GS207 Gimbal Sensor, requiring the provider to perform precision CNC machining to aerospace tolerances and handle the integration of optical sensors. Deliverables may include either raw components or finished sub-assemblies. To be eligible, contractors must maintain CAGE registration and hold either AS9100 or ISO 9001 certification. The project falls under NAICS code 334511. Interested parties must submit their responses by November 18, 2026, following the posting date of November 3, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

Sensor Gimbal GS207

Solicitation # SPRDL1-27-R-A006

Solicitation SPRDL1-27-R-A006 is a sole source, five year long-term Indefinite Delivery Indefinite Quantity contract for the procurement of Sensor Gimbal GS207, NSN 5836-01-556-9112, MFPN 7002925-7. The requirement is restricted to DRS Network and Imaging Systems, LLC, with an estimated procurement value of 30,363,410.00 dollars. This Firm Fixed Price contract establishes a guaranteed minimum quantity of 43 units to be ordered on the first delivery order, with a maximum ceiling of 154 units. Performance is based in the continental United States with delivery required 300 days after receipt of order on a FOB Destination basis. Due to the export controlled nature of the equipment, offerors must be certified under the United States/Canada Joint Certification Program to access technical data. While no Technical Data Package is associated with this requirement, the contractor must submit Engineering Change Proposal documents with their proposal to address obsolete parts. Additionally, because this is a sole source procurement, any offerors providing parts from the original equipment manufacturer must submit full traceability with their proposal to be considered for award.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

Sight, Bore Optical

Solicitation # SPRDL127RA009

Solicitation SPRDL127RA009 is a firm fixed price procurement issued by DLA Weapons Support (Warren) for 80 units of Sight, Bore Optical (NSN 1240001523512, Part Number 10549221). This effort is a total small business set-aside and requires an all or none award. The contractor is responsible for all costs associated with packing, shipping, and insurance, with delivery set as FOB Destination to DLA Distribution Anniston, Alabama. The delivery schedule for the primary quantity is specified as 365 to 485 days after contract award, with a specific delivery date of March 28, 2027, noted for certain line items. The contract mandates strict adherence to quality and technical standards, including ISO 9001:2015 or equivalent and MIL-PRF-13830B for optical element surface quality. A Technical Data Package is provided, and access requires a signed Use and Non-Disclosure Agreement. A First Article Test is required, during which the contractor must test three units for compliance with all drawings and Quality Assurance Provisions. Inspection and acceptance will occur at the origin within the contractor's facility, requiring coordination with the DCMA. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for palletization and hazardous materials documentation. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 6 hours ago

DEADLINE

Pump Unit, Hydraulic

Solicitation # SPRDL1-26-R-A019

Solicitation SPRDL1-27-R-A027 is a 100% Total Small Business Set-Aside for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract to provide Hydraulic Pump Units (NSN 4320-01-432-6208, PN 12395352). The contract is a Firm Fixed Price (FFP) requirement with a guaranteed minimum quantity of 65 units and a maximum ceiling of 406 units over the five-year period. The first delivery order is for 65 units, with a required delivery rate of three units every thirty days. Delivery timelines are set at 330 days if First Article Testing (FAT) is required, or 240 days if FAT is waived or not required. All shipments are FOB Destination and must be performed within the Continental United States (CONUS). The procurement includes stringent quality and technical requirements, including Higher-Level Contract Quality (FAR 52.246-11), MIL-STD-1916, and specific pretreatment and CARC painting standards. A First Article Test is required unless a waiver is granted. Because the technical data is export controlled, offerors must be certified under the United States/Canada Joint Certification Program (JCP) and sign a Non-Disclosure Agreement to access the Technical Data Package. Proposals must be submitted via email to the Contract Specialist by November 30, 2026. Evaluation will be based on the lowest evaluated offer or best value, with specific evaluation factors applied to unused government surplus property and Critical Safety Item coordination.

Fluid Power Pump and Motor Manufacturing

POSTED

DEADLINE

GYRO ASSEMBLY, GUN

Solicitation # SPRDL1-27-R-A011

DLA Land Warren is issuing a pre-solicitation notice for the procurement of 144 Gyro Assemblies, identified by NSN 1240-01-095-5205 and Part Number 12292348. This requirement is a 100 percent Small Business Set-Aside and will be awarded as a Firm-Fixed-Price Long Term Contract with delivery to a destination point and MIL B packaging. The formal solicitation is expected to be posted on SAM.gov on or about November 23, 2026. Access to the Technical Data Package is strictly limited to Data Custodians certified under the United States/Canada Joint Certification Program due to export controls. Additionally, the contracting officer may utilize a reverse auction as a pricing technique, which requires participating contractors to be registered and trained in the reverse auction system. Interested vendors should follow the notice on SAM.gov and ensure their JCP certification is current to be eligible for the technical data.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Differential, Driving

Solicitation # SPRDL127QA003

Solicitation SPRDL127QA003 is a request for quote issued by DLA Land and Maritime (Warren) for the procurement of 14 units of Driving Differentials, NSN 2520-01-359-0730. This is a limited source, source-controlled requirement specifying manufacturer part A86015446 from Meritor Industrial Products, LLC. The expected result is a firm fixed price purchase order with no options. Quotations must be submitted via email to the Contract Specialist by November 16, 2026. Award will be based on the lowest evaluated offer that meets all material requirements and responsibility criteria, with specific evaluation factors applied to unused former government surplus property and critical safety items. The contract requires delivery to Texarkana, Texas, with FOB Destination terms and allows for accelerated delivery schedules. Supplies must be packaged and marked according to MIL-STD-2073-1 and MIL-STD-129, Revision R, with a maximum unit pack weight of 540 pounds. Inspection and acceptance will occur at the contractor's facility at the point of origin. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. While some metadata suggests a small business set-aside, the solicitation document explicitly states it is not a small business set-aside.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

DEADLINE

Transmission, Hydraulic

Solicitation # SPRDL127RA051

This Sources Sought Notice, issued by DLA Land Warren, seeks potential suppliers for hydraulic transmissions used in A2 and Up Armored HMMWVs. The requirement covers National Stock Number 2520-01-625-7876, with part numbers 57K6233/12563695. The government is looking for a minimum quantity of 408 units, with a maximum potential requirement of up to 10,200 units. It is important to note that this is not an open solicitation for bids or proposals. Because the government does not possess the Technical Data Package or specifications, interested parties must undergo qualification testing and evaluation to become an approved source. Achieving approved source status does not guarantee a contract but allows the vendor to compete on future solicitations for these components.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

DEADLINE

in about 1 year

Earlier notices in this NAICS code

Posted before this notice, open and closed

Environmental and Seismic Qualification Testing

Battelle Energy Alliance–doe Cntr

POSTED

about 6 hours ago

DEADLINE

Ultrasonic Testing (UT) Specialist

POSTED

about 6 hours ago

DEADLINE

Medium and Low Voltage Electrical System Testing

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 6 hours ago

DEADLINE

Groundwater Monitoring in Wabasha County, MN

Solicitation # W912ES27QA013

W07V Endist St Paul

POSTED

about 6 hours ago

DEADLINE

B--USGS Paired Bulk Mineralogy/Clay Analyses

Solicitation # 140GG027Q0021

Usgs Contracting Activity

POSTED

about 6 hours ago

DEADLINE

First Article Testing (FAT) for Indicator Light Filters

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Production Lot Testing (PLT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Contractor Testing Services

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

First Article Testing and Certification Services

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

First Article and Production Lot Testing (FAT/PLT) Services

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Quality Assurance and Certification for Critical Safety Items

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS