Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Quality Certification and Data Documentation

Active

Federal

Response Deadline11/10/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This small business set-aside subcontract, issued by the Department of Defense through DLA Maritime Portsmouth, involves providing quality inspection and certification services for hardware projects. The contractor is responsible for verifying material properties against QQ-N-286G, conducting dimensional inspections of 1/4-20UNC-3A threads and 0.880 inch lengths, and validating lockwire hole placement according to FF-S-86J. These tasks must be performed using precision micrometers and calipers to ensure strict adherence to technical specifications. The scope of work concludes with the delivery of specific data documentation, specifically the CDRL DI-MISC-81356A and CDRL DI-MISC-82386 certificates of compliance. Performance of these services will take place in Kittery, Maine. The solicitation was posted on November 3, 2026, with a response deadline of November 10, 2026, under NAICS code 541380.

General Info

Agency

Department Of Defense → DLA Maritime - Portsmouth

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Kittery, ME, 03904, USA

Set-Aside

SBA

Documents

This scope was carved out of SPMYM327Q1105.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Hex Socket Head Cap Screws

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 10

Submission deadline

Response Deadline

11/10/2026, 08:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Maritime - Portsmouth

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA Maritime - Portsmouth

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs quality inspection and certification for prime contractors on DoD hardware projects. Verifies material properties against QQ-N-286G, performs dimensional inspection of 1/4-20UNC-3A threads and 0.880" length, and validates lockwire hole placement per FF-S-86J using precision calipers and micrometers. Delivers completed CDRL DI-MISC-81356A and CDRL DI-MISC-82386 certificates of compliance.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a qualified industrial hygiene consultant to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, specifically evaluating potential silica dust exposure for 27 students and instructors during activities such as sand handling and brick cutting. The selected consultant will be responsible for performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Key deliverables include a written report, laboratory results, and a prioritized corrective action plan for dust control. This is a fee-for-service subcontracting opportunity open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone firms. Bids must be submitted by November 6, 2026, and must include a bid sheet, completed supplier packet, proof of insurance, and three references for similar projects. Award decisions will be based on best value, evaluating the consultant's qualifications in occupational exposure assessment and their proposed technical approach. The contract requires compliance with Service Contract Labor Standards, FAR regulations regarding small business utilization and debarment disclosure, and strict government confidentiality and security protocols.

Edison Job Corps

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract for First Article Test (FAT) Validation and Certification supports prime contractors on DLA Weapons Support projects. The selected provider will utilize precision measurement equipment to test initial production units, specifically validating bearing tolerances and performance. The scope of work includes coordinating with the Engineering Support Activity for acceptability evaluations and delivering a final FAT Report along with an approved test sample. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in Bremerton, Washington. To ensure quality standards, the contractor must maintain an ISO 9001:2015 quality management system. The opportunity falls under NAICS code 541380, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Critical Safety Item (CSI) Quality Assurance and SamplingThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing independent testing and quality validation for aerospace projects. The selected contractor will be responsible for executing sampling plans according to MIL-STD-1916, ASQ H1331, or MIL-STD-105/ASQ Z1.4 standards. Utilizing CMM and spectroscopy equipment, the contractor must validate Critical Safety Item requirements and ensure compliance with DFARS 252.211-7003, with a preference for ISO/IEC 17025 certification. The primary deliverables for this engagement include detailed inspection reports and sampling certificates. The work is categorized under NAICS code 541380 and will be performed in the 78419-5255 zip code area. Interested parties must submit their responses by the deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Production Lot Testing (PLT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Aviation Component Quality Assurance and Testing ServicesThe Aviation Component Quality Assurance and Testing Services subcontract involves providing precision measurement, testing, and quality certification for aircraft duct assemblies. Supporting prime contractors for the Department of Defense DLA Weapons Support aviation supply chain, the selected provider will perform dimensional inspections, pressure and leak testing, and material certification verification. All work must be conducted using RT001 compliant calibrated measuring and test equipment, and the contractor is required to maintain ISO 9001:2015 certification to deliver the necessary inspection reports and test certificates. This opportunity is categorized under NAICS code 541380 and will be performed in Broken Arrow, Oklahoma. Interested parties must respond by November 12, 2026, to support the critical quality assurance needs of the DLA Weapons Support Aviation Supply Chain ESOC Buys.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

First Article Testing (FAT) Services for Aircraft SeatThis subcontract involves providing First Article Testing services for aircraft seats to support prime contractors delivering DLA supply contracts. The scope of work requires conducting safety and performance validation on one unit of Lot/Item 1680-01-699-2124 using specialized testing rigs. The selected provider is responsible for coordinating source inspections and developing a formal FAT Report to document the results. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. All deliverables, including the validated test unit and the completed FAT Report, must be submitted within 90 days. The opportunity is categorized under NAICS code 541380, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

Third-Party Inspection and SamplingThis subcontract for Third-Party Inspection and Sampling supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent sampling and inspection of Retainer Handles, specifically verifying dimensions and material certifications. Technical requirements include the use of CMM, calipers, and micrometers calibrated to national standards, with sampling conducted according to MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. The scope of work culminates in the delivery of detailed inspection reports and certifications of compliance. This opportunity is managed by the Department of Defense under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must adhere to the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing (FAT) Services involves providing technical testing and certification for prime contractors on DLA supply contracts. The scope of work focuses on conducting structural integrity and ballistic impact tests for NSN 1680-01-161-1182, utilizing high-speed imaging tools and ballistic ranges as mandated by the Specification Control Drawing. The selected provider must hold military-equivalent or ISO/IEC 17025 laboratory accreditation to ensure compliance with quality standards. A comprehensive FAT Report is required as the final deliverable, which must be submitted within 120 days after receipt of order. This effort is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Critical Application Component CertificationThe Critical Application Component Certification subcontract involves providing independent testing and inspection services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The primary scope of work focuses on verifying the structural integrity of Boeing part number 60-3087-2 through dimensional inspection using CMM and Non-Destructive Testing. Performance of these services will take place at Tinker AFB. To qualify, the contractor must maintain NADCAP accreditation and adhere to ISO 9001:2015 and SAE AS9003 standards. Required deliverables include comprehensive inspection reports, quality test data, and a Certification of Conformance. The solicitation was posted on November 3, 2026, with a response deadline of November 12, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Aerospace Component Testing and CertificationThis subcontract for Aerospace Component Testing and Certification supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will perform Production Lot Testing and quality validation for prime contractors, ensuring items are verified against the Technical Data Package. Testing must be conducted via random sample selection in accordance with MIL-STD-1916 or ASQ H1331 standards. To be eligible, contractors must hold CMMC Level 2 and JCP Certifications. Required deliverables include material and process certifications, DD Form 1222, and PLT reports following DI-NDTI-80809B guidelines. The performance of this contract is centered in zip code 32212-0103, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

First Article Test (FAT) for Electrical Connectors

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

Annual Hose Testing

Solicitation # 358

The Jefferson Parish Government is soliciting bids for a two-year contract to provide annual hydrostatic hose testing for the Jefferson Parish East Bank Consolidated Fire Department. The contractor is responsible for providing all labor, equipment, materials, and supervision to perform visual inspections and hydrostatic pressure testing on 45,700 feet of 1-3/4 inch hose, 42,640 feet of 2-1/2 inch hose, and 63,550 feet of 4 inch hose. All services must be performed at the Fire Training Center in Bridge City, Louisiana, in strict compliance with NFPA 1962 standards and departmental requirements. The scope includes the removal, testing, and reloading of all in-service and spare hoses, with testing conducted on consecutive days, weather permitting. The selected vendor must provide detailed test reports and proper tagging for each hose section, identifying the specific apparatus and location or spare storage site. Award will be granted to the lowest responsive and responsible bidder. To be considered responsive, bidders must submit all required insurance documentation, as failure to provide final insurance certificates within ten calendar days of the bid opening will result in rejection. All insurance must conform to Jefferson Parish Resolution No. 136353 or No. 141125, and coverage must be maintained throughout the contract term to avoid suspension or termination. Scheduling for these services is coordinated through Richard Parker.

Jefferson Parish Government

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Maritime - Portsmouth

Same awarding agency

Cast Steel Grit SupplierThis small business set-aside subcontract through DLA Maritime Portsmouth involves the supply of industrial-grade cast steel grit for prime contractors on DLA procurement projects. The required material must be a ferrous metallic abrasive that meets SSPC-AB-3 commercial specifications, specifically featuring a 25/40 50/50 pre-mix grit size and a Rockwell C hardness range between C-50 and C-65. The total order consists of 25 drums, each containing 1,700 lbs, for a total delivery of 42,500 lbs of abrasive media. Performance for this contract will take place in Kittery, Maine. Interested parties must ensure they possess a CMMC UID if the processing of Federal Contract Information or Controlled Unclassified Information is required. The solicitation was posted on November 3, 2026, with a response deadline of November 10, 2026.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 10 hours ago

DEADLINE

Specialized Hex Socket Head Cap Screw SupplyThis small business set-aside subcontract, managed by DLA Maritime Portsmouth for the Department of Defense, requires the supply of 72 precision-manufactured hex socket head cap screws. The screws must be 1/4-20UNC-3A with a length of 0.880 inches, manufactured or sourced according to FF-S-86J TY VI using NICUAL material per QQ-N-286G. A critical technical requirement includes precision drilling of the head for lockwire in accordance with FF-S-86J PARA 3.5.2 and Table I. The selected contractor is responsible for providing a Certificate of Compliance as specified by CDRL DI-MISC-81356A. Performance for this contract will take place in Kittery, Maine. Interested parties must respond by November 10, 2026, to support prime contractors on these Department of Defense projects.

Pharmaceutical Preparation Manufacturing

POSTED

about 10 hours ago

DEADLINE

Cast Steel Grit

Solicitation # SPMYM327Q1104

DLA Maritime Portsmouth is soliciting quotes for the procurement of 25 drums of Cast Steel Grit, with each 55-gallon drum containing 1700 lbs. The material must adhere to commercial specification SSPC-AB-3, featuring a 25/40 grit size (50/50 pre-mix) and a Rockwell C hardness range of C-50 to C-65. This requirement is a 100% Small Business Set-Aside under NAICS code 327910. The award will be based on the Lowest Price Technically Acceptable (LPTA) criteria, and the government will utilize the Supplier Performance Risk System (SPRS) to evaluate vendor responsibility. The required delivery date is December 30, 2026, with shipments delivered FOB Destination to the Portsmouth Naval Shipyard in Kittery, Maine. Offerors must provide a Certificate of Quality Conformance and descriptive literature to demonstrate technical compliance. Submissions are due by November 10, 2026, and must include the completed 252.204-7016 provision and proof of active SAM registration. Payment terms are Net 30 days after acceptance, with options for payment via Government Purchase Card or Wide Area Workflow, though a WAWF receiving report is mandatory regardless of the payment method chosen. Eligibility for award also requires a completed CMMC Level 2 Self-Assessment uploaded to SPRS.

Abrasive Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

IMPELLER PUMP ASSEMBLY

Solicitation # SPMYM327Q5005

DLA Maritime Portsmouth, acting for the Portsmouth Naval Shipyard, is soliciting quotes for three impeller pump assemblies, specifically part number F-8BB462X1 (Impeller Assembly PC-462 of PL-11312-F-18/C), which must be constructed from NICU, QQ-N-288 Comp E material. This is a 100% Small Business Set-Aside under NAICS code 333996. The award will be based on the Lowest Price Technically Acceptable (LPTA) criteria, though urgency may shift the priority to the soonest delivery date. The government required delivery date is December 3, 2026, and the place of performance is Kittery, Maine. Qualified sources must submit their quotes via email to [email hidden] and [email hidden] by November 5, 2026, at 10:00 AM EST. Submissions must include the CAGE code, business size, country of origin, and completed provisions 52.204-24, 52.204-26, 252.204-7016, and 252.204-7019. If the offeror is not the manufacturer, the manufacturer's name, location, and business size are required. Payment terms are Net 30 days after acceptance, with a preference for Government Commercial Purchase Card or Wide Area Workflow. Packaging must comply with ASTM D-3951 and MIL-STD-129, and the use of asbestos, excelsior, or loose fill polystyrene is prohibited.

Fluid Power Pump and Motor Manufacturing

POSTED

about 10 hours ago

DEADLINE

Assorted Cap Screws

Solicitation # SPMYM327Q1106

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

Hex Socket Head Cap Screws

Solicitation # SPMYM327Q1105

Solicitation SPMYM327Q1105 is a combined synopsis and solicitation issued by DLA Maritime Portsmouth for the procurement of Hex Socket Head Cap Screws. This requirement is a 100% Small Business Set Aside under NAICS code 332722, with a size standard of 600. The scope involves the delivery of 144 total screws (split across two line items of 72 each) manufactured in accordance with FF-S-86J TY VI and material specification QQ-N-286G, including specific drill head requirements for lockwire. Deliverables include the hardware and associated data requirements, specifically Certificates of Compliance and Certification Data/Reports. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria, though the government may award based on the soonest delivery if the Required Delivery Date of December 10, 2026, cannot be met. Offerors must be active in the System for Award Management (SAM) and provide descriptive literature to demonstrate technical compliance. Delivery is requested FOB Destination to Kittery, Maine. Payment is available via Government Purchase Card or Wide Area Workflow with Net 30 terms. Quotes must be submitted via email to the designated points of contact by November 10, 2026, at 3:00 PM EST.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

Specialized Freight Shipping for Naval SuppliesThis subcontract, titled Specialized Freight Shipping for Naval Supplies, involves the transportation and delivery of 338 manufactured curtains for Department of Defense Navy shipboard projects. The contractor is responsible for packaging and securing the items using protective materials to preserve the integrity of the Nomex fabric and coordinating all freight logistics to ensure delivery to specified government locations. Managed by DLA Maritime - Portsmouth, the project is a total Small Business Set Aside under NAICS code 484121, with performance taking place in Kittery, Maine. The selected provider must possess standard commercial shipping licenses and strictly adhere to all government shipping protocols to successfully complete the delivery.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Navy Shipboard Rack Curtain ProductionThis subcontract opportunity through DLA Maritime Portsmouth involves the production of 338 black single-panel rack curtains for Department of Defense Navy shipboard projects. The contractor is responsible for fabricating double-layer curtains using Nomex flame-resistant meta-aramid material, ensuring strict adherence to MIL-C-24500 and MIL-STD-1623 specifications. Successful execution requires the use of industrial sewing and cutting equipment to deliver finished curtains in various sizes. The project is designated as a total Small Business Set Aside under NAICS code 314120, with performance taking place in Kittery, Maine. Applicants must provide a valid CAGE code and UEI to be considered. The solicitation was posted on November 2, 2026, with a response deadline of November 5, 2026.

Curtain and Linen Mills

POSTED

DEADLINE

RACK CURTAINS, BLACK SINGLE PANELS, VARIOUS SIZES DARKENING DOUBLE LAYER NOMEX, NAVY SHIPBOARD

Solicitation # SPMYM327Q6001x

DLA Maritime Portsmouth is soliciting quotes for the procurement of 338 black single panel rack curtains for Navy shipboard use under solicitation SPMYM327Q6001x. The curtains must be constructed from darkening double layer Nomex material and comply with MIL-C-24500 and MIL-STD-1623. Specific manufacturing requirements include sewn eyelets positioned one inch from the top and a restriction where only curtains 18 inches or higher may have pockets. The requirement is a 100 percent small business set-aside under NAICS code 314120, with a size standard of 750 employees. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria, with the Supplier Performance Risk System used to determine vendor responsibility. To be considered responsive, offerors must meet the required delivery date of November 20, 2026. Submission requirements include descriptive literature, proof of traceability for non-manufacturers, and completed registration in the System for Award Management. Quotes are due by November 5, 2026, at 1:00 PM ET via email. Payment will be processed via Government Purchase Card or Wide Area Workflow on Net 30 terms following destination inspection and acceptance.

Curtain and Linen Mills

POSTED

DEADLINE

Solicitation # SPMYM327Q4003

Solicitation SPMYM3-27-Q-4003 is a total small business set-aside issued by DLA Maritime Portsmouth for the procurement of 12 units of 1-inch Valve Clapper Assemblies for the Portsmouth Naval Shipyard. This is a brand-name mandatory requirement for Emerson Automation Solutions part number S90051/300453, as these are direct replacement parts and equal-to submittals will not be accepted. The assembly must include a clapper, clapper pin, two clapper pin bushings, a clapper seal, and two bushing retaining rings, adhering to stock number 4820-LL-D00-0292 and drawing NS-4070 Rev D. The procurement is conducted under FAR Part 12 and FAR 13 Simplified Acquisition Procedures, with an award based on Lowest Price Technically Acceptable criteria and a required delivery date of December 3, 2026. Quotes must be submitted via email to Gary Chandler by November 12, 2026, and must include delivered prices FOB Destination and the country of origin for each line item. Packaging must comply with ASTM D-3951, prohibiting asbestos, excelsior, and loose-fill polystyrene for shipboard use, and requires two-dimensional bar-coded shipping labels via the DLA Vendor Shipment Module per MIL-STD-129. Inspection and acceptance will occur at the destination. Payment terms are Net 30 days after acceptance, with invoices submitted through Wide Area Workflow. The contract also incorporates specific security and compliance mandates, including DFARS 252.204-7012 for safeguarding unclassified controlled technical information and the Buy American Act.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Torlon Round Bar Material SupplyThis small business set-aside subcontract involves the procurement or manufacture of Torlon round bar, a polyamide-imide high-performance thermoplastic, for prime contractors delivering to DLA Maritime in Portsmouth. The selected provider must ensure the material meets strict government specifications and deliver 20 feet of the product along with a Certificate of Compliance. Performance will take place in Kittery, Maine, under NAICS code 325211. Compliance requirements include adherence to ASTM D-3951 and MIL-STD-129 packaging standards, with a strict prohibition on asbestos and loose-fill polystyrene. Additionally, the contractor must maintain an active SAM registration and complete a CMMC Level 1 self-assessment. Responses for this opportunity are due by November 11, 2026.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

TORLON ROUND BAR

Solicitation # SPMYM327Q7003

DLA Maritime Portsmouth is soliciting quotes for the procurement of 20 feet of Torlon Round Bar under solicitation SPMYM327Q7003. This is a total small business set-aside utilizing the Lowest Price Technically Acceptable (LPTA) evaluation method. The requirement includes the delivery of the material and a Certificate of Compliance in accordance with DI-MISC-81356A. The government required delivery date is December 19, 2026, with final inspection and acceptance occurring at the destination in Kittery, Maine. Qualified offerors must be registered in the System for Award Management and submit their quotes via email by November 11, 2026, at 1:00 PM EST. Submissions must include descriptive literature, proof of traceability if not the manufacturer, and completed representations regarding covered defense telecommunications equipment. The contract is governed by FAR Part 12 for commercial items and requires compliance with CMMC Level 1 self-assessment. Payment terms are Net 30 days, with options for Government Commercial Purchase Card or Wide Area Workflow invoicing. Packaging must adhere to ASTM D-3951 and MIL-STD-129 standards, specifically prohibiting the use of asbestos, excelsior, and loose fill polystyrene.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Groundwater Monitoring in Wabasha County, MN

Solicitation # W912ES27QA013

W07V Endist St Paul

POSTED

about 10 hours ago

DEADLINE

Q301--HUSBANDRY ANIMAL -wo/wd, B+3 POP 12/17/2026 - 12/16/2030

Solicitation # 36C26227Q0093

262-NETWORK Contract Office 22 (36C262)

POSTED

about 10 hours ago

DEADLINE

B--USGS Paired Bulk Mineralogy/Clay Analyses

Solicitation # 140GG027Q0021

Usgs Contracting Activity

POSTED

about 10 hours ago

DEADLINE

First Article Testing (FAT) for Indicator Light Filters

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Production Lot Testing (PLT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Contractor Testing Services

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

First Article Testing and Certification Services

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

First Article and Production Lot Testing (FAT/PLT) Services

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Quality Assurance and Certification for Critical Safety Items

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Testing Services

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

First Article Test (FAT) and Certification Services

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

First Article Test (FAT) Specialist

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS