Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SUPPORT, SLEEVE

Active
SPE7M4-26-T-410TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M4-26-T-410T is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 110 sleeve supports, identified by NSN 4730-01-144-7579. These critical application items for naval use consist of nickel aluminum bronze rings with Buna-N bonding, with ASTM B505 Alloy C-958 listed as an approved alternate material. The items have a specific shelf life of 180 months and must adhere to strict technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking. This procurement is set aside for Service-Disabled Veteran-Owned Small Businesses, requiring SBA certification for eligibility. The delivery is established as FOB Origin with an original required delivery date of December 14, 2026, and a need ship date of March 9, 2027. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor is required to use the Wide Area WorkFlow system for electronic invoicing and receiving reports. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and specific cybersecurity requirements under DFARS 252.204-7012. All quotes must be submitted via the DIBBS system by the closing date of September 25, 2026.

General Info

SDVOSB solicitation for 110 sleeve supports due December 14, 2026, via DIBBS.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

332996 - Fabricated Pipe and Pipe Fitting Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SDVOSBC

Documents

(1)

SPE7M4-26-T-410T Request for Quotations

PDF•18 pages•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Deadline changed

Response deadline changed from Sep 25, 2026 to Sep 30, 2026.

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Office AddressUSA
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SUPPORT,SLEEVE
SUPPORT, SLEEVE.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NICKEL ALUMINUM BRONZE RINGS WITH BUNA-N BONDING. 4 RINGS PER SLEEVE.
4.880 IN. O/A LENGTH, 4.400 IN. SLEEVE I.D., 4.930 IN. SLEEVE O.D. E/I
NAVAL APPLICATIONS. ASTM B505 ALLOY C-958 IS AN APPROVED ALTERNATE
MATERIAL FOR THE RINGS.
RS069: Shelf life requirement RS001 for a TYPE 2 (CODE X) item with a shelf life of 180 month (extendable) applies to this item.
CRITICAL APPLICATION ITEM
CUSTOM HYDRAULIC & MACHINE, INC. 53159 P/N CMC-SC-1-005 HYDRASEARCH COMPANY, LLC 32142 P/N FF9700-80-262 HYDRASEARCH COMPANY, LLC 32142 P/N ISS-80
IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018270978 0001 EA 110.000
NSN/MATERIAL:4730011447579
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
SPE7M4-26-T-410T
SECTION B
PR: 7018270978 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/09/2027 Original Required Delivery Date:12/14/2026
SPE7M4-26-T-410T NSN/Part Number: 4730-01-144-7579 Quantity: 110 EA Purchase Request: 7018270978QTY: 110 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
Supply of Bulkhead Fittings (NSN 4730-01-198-0845)This subcontract with the Department of Defense Fluid Handling Division requires the manufacture or sourcing of eight bulkhead fittings meeting NSN 4730-01-198-0845 technical specifications. The contractor is responsible for delivering these units to the government destination in New Cumberland, ensuring all items are packaged and labeled according to MIL-STD-129 and accompanied by safety data sheets per Federal Standard No. 313. Compliance is mandatory regarding 29 CFR 1910.1200 and FAR 52.223-7 concerning radioactive material. The opportunity is categorized under NAICS code 332996, with a response deadline of September 30, 2026.
FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
BULKHEAD, FITTING
Solicitation # SPE7M3-26-T-7245
The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for eight bulkhead fittings with NSN 4730-01-198-0845 under solicitation number SPE7M3-26-T-7245. The solicitation was posted on July 5, 2026, with a response deadline of July 16, 2026, and is open to federal contractors without a specified set-aside classification. The item is classified as a fitting and is intended for federal procurement purposes, with no specific place of performance or point of contact detailed in the documentation. Interested parties must submit responses via the DIBBS platform using the provided UI link before the deadline to be considered for award.
FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
PIPE, METALLIC
Solicitation # SPE7M4-26-T-410R
FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
CAP, TUBE
Solicitation # SPE7M3-26-T-9103
Solicitation SPE7M3-26-T-9103 is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 372 units of tube caps, identified by NSN 4730016257090. The items are designated as critical application items and must be produced by an accredited manufacturer or distributor listed on the Performance Review Institute Qualified Manufacturer List or Qualified Products List. Technical specifications are governed by SAE-AS4214 Revision B and AS85720, with strict prohibitions against the intentional use of mercury or Class I ozone depleting chemicals. Delivery is required within 66 days after order, with the shipping destination set as DLA Distribution Cherry Point in North Carolina. The contract specifies FOB Origin terms under the First Destination Transportation program, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows DLA requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. The solicitation is categorized under NAICS code 332996.
FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
SLED
McIntosh Power Plant - Heat Trace Bundle Material and Accessories
Solicitation # 2026-ITB-125
Lakeland Electric is soliciting bids under solicitation number 2026-ITB-125 for the procurement of replacement heat trace tubing bundle materials and associated accessories for the McIntosh Power Plant in Florida. The primary objective is to acquire materials that conform to specific requirements and quantities to support a planned installation schedule for existing systems. Interested parties must submit their responses by the deadline of October 9, 2026. The procurement process is managed by the LE Production MPP agency in Lakeland, Florida, with Chase Miller and Linda Alspaugh serving as the primary and secondary points of contact.
LE - Production - MPP

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
International
Pipe and Appurtenances SupplyThis subcontract for the Corporation of the Town of Cochrane in Ontario involves the supply of piping and fittings for watermain projects. The scope of work includes providing 110 meters of 150mm pipe, 125 meters of 250mm cast iron pipe, 40 meters of 300mm PVC pipe, and all associated valves. The supplier is responsible for delivering all pipe and appurtenances directly to the project site. A critical requirement of the contract is the provision of material certifications for every supplied component to ensure quality and compliance. The response deadline for this opportunity is October 23, 2026.
The Corporation of the Town of Cochrane - Ontario

POSTED

about 16 hours ago

DEADLINE

in 27 days
View Details
NAICS: 332996
New
International
Material Supplier (PVC & Copper)This subcontract agreement involves the supply of critical piping and fittings for infrastructure projects managed by the City of St. John's. The supplier is responsible for delivering 200mm PVC DR18 pipe, 19mm copper tubing, and all associated valves and fittings specifically to the Shea Street site. In addition to the physical delivery of materials, the supplier must provide necessary shop drawings and material certifications to ensure compliance with project standards. The procurement process for this material supply contract was posted on September 25, 2026, with a response deadline of October 9, 2026. Operating under NAICS code 332996, the contract focuses on the timely delivery of all required piping materials to the designated project site to support the prime contractor's infrastructure goals.
City of St. John's

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
Federal
Cibola National Forest Culvert Supply
Solicitation # 1240LP26Q0204
Cibola National Forest

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
Federal
11F | C-5 | TUBE, BLEED AIR
Solicitation # SPE4A727R0007
This unrestricted indefinite quantity contract, managed by DLA Aviation, is for the procurement of bleed air tubes under NSN 1560-007282260. The part is manufactured by Arrowhead Products Corp under part number 12673-102A. The contract establishes a base period of three years with no options, featuring an estimated annual quantity of 40 units and a production delivery timeline of 365 days. The solicitation is scheduled for release around October 9, 2026, and will be available exclusively through the DLA Internet Bid Board System. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination. Interested parties must submit responses by November 9, 2026, through the specified digital channels.
DLA Aviation

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332996
New
SLED
4-Inch Raw Water Pipe SupplyThis subcontract involves the provision and delivery of approximately 5,360 linear feet of 4-inch diameter raw water transmission main piping and associated fittings for prime contractors. The project is located in Plattsburgh, New York, and is part of the New York State Clean Water/Drinking Water State Revolving Fund projects. All supplied materials must strictly adhere to the standards specified in the project plans. The solicitation was posted on September 25, 2026, with a response deadline of October 29, 2026. The contract falls under NAICS code 332996 and is managed by the state of New York. The primary scope of work focuses on the procurement and site delivery of the specified piping and fittings to ensure the successful completion of the raw water transmission infrastructure.
New York

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332996
New
SLED
Pipe and Fitting SupplyThis subcontract for Pipe and Fitting Supply involves providing essential piping materials to prime contractors for Ironhouse Sanitary District projects. The scope of work includes the manufacture and delivery of 6-inch C900 DR-18 PVC, Ductile Iron Pipe, Cast-Iron Pipe, and HDPE pipe. All delivered materials must be certified and clearly marked with the brand name, pipe type, strength class, and batch lot. The opportunity was posted on September 24, 2026, with a response deadline of October 14, 2026. It falls under NAICS code 332996 and is managed by the Engineering agency in California. Interested parties can find further details through the OpenGov procurement portal.
Engineering

POSTED

1 day ago

DEADLINE

in 19 days
View Details
NAICS: 332996
New
DIBBS
Manufacture of Steel Pipe to Boss ElbowsThis subcontract involves the manufacture of 16 steel pipe-to-boss elbows for prime contractors supporting the Department of Defense Fluid Handling Division. The fabrication process must strictly adhere to NSN 4730-01-124-2493 specifications, SPI 9337892, and the DLA Master List of Technical and Quality Requirements, utilizing precision machining and forming equipment to ensure all geometry standards are met. The opportunity is categorized under NAICS code 332996 and was posted on September 24, 2026, with a response deadline of October 5, 2026. All deliverables must comply with the rigorous technical and quality mandates established by the agency to ensure the components meet the necessary operational standards for fluid handling projects.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 339999
New
DIBBS
Nonmetallic Hose Supply (NSN 4720-00-817-7781)This subcontract involves the supply of 175,000 nonmetallic hoses for the Department of Defense Fluid Handling Division, specifically for DLA Land and Maritime projects. The contractor is responsible for manufacturing or sourcing hoses with a 7 inch inner diameter and a length of 35 feet, ensuring there are no residual lengths. Performance requires a valid CAGE code and adherence to strict DLA marking and packaging specifications. A critical component of the agreement is the execution and documentation of First Article Testing, with the final test report due within 90 days. The place of performance is located in San Diego, California. The total deliverable consists of the specified quantity of hoses and the accompanying First Article Test Report.
All Other Miscellaneous Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-27-Q-0002
This firm fixed price solicitation issued by the DLA Land and Maritime Fluid Handling Division is for the procurement of nonmetallic rubber hoses, specifically designed for petroleum-based fuels and water services. The required hoses must have a 7 inch inner diameter and a length of 35 feet, adhering to the specification for smooth bore, lightweight buoyant type discharge hoses. The total quantity requested is 175,000 units, split between two line items of 87,000 and 88,000 units respectively. Delivery is set for 815 days after the order date, with shipping destinations including San Diego, California, and New Cumberland, Pennsylvania. The contract mandates strict quality and compliance standards, including a first article test requirement with a report due within 90 calendar days of the contract date. Technical specifications are governed by MIL-DTL-22240G, and packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Specifically, shelf-life markings including cured and expiration dates are required on all packaging levels for this Type I item, which has a non-extendable shelf life of 120 months. Additionally, the use of Class I ozone depleting chemicals and the intentional addition of mercury are prohibited. Inspection and acceptance are generally at the origin, though first article testing involves source inspection and destination acceptance. Payment will be processed electronically through the Wide Area WorkFlow system.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-410M
This solicitation, issued by the DLA Land and Maritime Fluid Handling Division, seeks quotes for 4,975 feet of 3/4 bulk length nonmetallic hose, identified by NSN 4720005548088. The item is classified as a commercial product and is subject to the Qualified Products List (QPL) or Qualified Manufacturers List (QML). The procurement requires adherence to MIL-DTL-8788G(2) and MIL-STD-129R(3), with a specific non-extendable shelf life of 120 months. All supplies must be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB, with a required delivery date of March 29, 2027, and a delivery window of 164 days. The contract mandates strict packaging and marking compliance per MIL-STD-2073-1E and MIL-STD-129, including specific Type I shelf-life markings on all containers and unpacked items. Inspection and acceptance will occur at the destination per FAR 52.246-2. Offerors must comply with the Buy American Act and the Berry Amendment, and are prohibited from using additive manufacturing processes. Administrative requirements include the use of Wide Area Workflow (WAWF) for invoicing and payment, and adherence to DFARS cybersecurity and safeguarding standards for covered defense information.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 114119
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7M4-26-T-410Y
Solicitation SPE7M4-26-T-410Y, issued by the DLA Land and Maritime Fluid Handling Division, seeks quotes for 44 units of mounting plates identified by NSN 2040-01-717-1838. This is a restricted source item requiring engineering source approval by the government design control activity, specifically referencing Re:Build CR, LLC part number 8931716. The procurement mandates strict environmental compliance, prohibiting the intentional addition of mercury or the use of class I ozone-depleting chemicals, except where specifically authorized by NAVSEA. The contract specifies delivery to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination per FAR 52.246-2. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Key regulatory requirements include the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Other Marine Fishing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
HOSE, PREFORMED
Solicitation # SPE7M4-26-T-410B
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
ELBOW, TUBE TO BOSS
Solicitation # SPE7M3-26-T-9104
Solicitation SPE7M3-26-T-9104 is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 372 carbon steel alloy tube-to-boss elbows. These critical application items must feature a 90 degree flow angle, a 1/4 inch O.D. male threaded 37 degree flared tube size, and a 3/8 inch O.D. male double threaded boss, including a nut and washer. The hardware must be manufactured in accordance with the SAE standard for hydraulic tube fittings and TDP Rev B Gen 2. The required delivery date is September 11, 2026, with a delivery window of 74 days after the award. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Albany in Georgia. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following DLA requirement RP001. Prohibitions are in place against the use of additive manufacturing processes, class I ozone depleting chemicals, and the intentional addition of mercury. Offerors must comply with the Buy American Act and Berry Amendment, and are required to use the Wide Area WorkFlow system for invoicing. Evaluation preferences are available for SBA-certified HUBZone small businesses. The solicitation incorporates various DFARS and FAR clauses regarding cybersecurity, whistleblower rights, and the prohibition of covered defense telecommunications equipment.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
NUT, TUBE COUPLING
Solicitation # SPE7M4-26-T-410V
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-388A
This contract is for the procurement of nine nonmetallic hose assemblies with a nominal inner diameter of 0.500 inches and a nominal overall length of 92.50 inches. The assemblies must support a maximum operating pressure of 5000 pounds per square inch and correspond to NSN 4720016539088 and Electric Boat Corporation part numbers 218086886 and H624-1101-F120. Delivery is required within 168 days, with a required delivery date of March 23, 2027, shipped FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Strict packaging and handling requirements are mandated, including the use of plugs or end caps to prevent contamination and the use of waterproof barrier bags per preservation method 31. Hoses must be individually coiled or rolled without kinking and packaged in unit containers with markings compliant with MIL-STD-129 and DLA packaging requirements. The contract specifies a zero percent quantity variance and designates both inspection and acceptance points at the destination.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, TUBE
Solicitation # SPE7M3-26-T-9113
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS