Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

48--MANIFOLD,PRESSURE

Active
N0010426QND69Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The government is seeking to procure a single unit of a pressure manifold, NSN 3H-4820-015714037-C1, for delivery to the Portsmouth Naval Shipyard in Kittery, Maine, under a sole-source contract authority authorized by FAR 6.302-1. The part is critical to naval operations, but the government does not own the technical data rights necessary to source replacements from alternative suppliers, and acquiring or reverse engineering the data is deemed uneconomical. While this action is not a competitive solicitation, responsible parties may submit proposals, quotations, or capability statements within 45 days of the notice date, or 30 days if awarded under an existing Basic Ordering Agreement, to allow the government to evaluate potential competition. Technical specifications and supporting military standards can be accessed through ASSIST-Online or the DODSSP system, though proprietary items like drawings, patterns, and deviation lists are not available through these channels. The contracting office is part of the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, with Stephen A. Knox as the designated point of contact. The government has determined that commercial item acquisition policies under FAR Part 12 do not apply to this requirement, but suppliers may still identify commercial alternatives within 15 days of this notice if they believe their offering meets the need.

General Info

Sole-source procurement of one pressure manifold for Portsmouth Naval Shipyard, no competition due to lack of technical data rights.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA
Contacts
STEPHEN A. KNOX
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NSN 3H-4820-015714037-C1, TDP VER 001, QTY 1 EA, DELIVER TO N50286, PORTSMOUTH NAVAL SHIPYARD L1SS, KITTERY, ME 03904. The Government does not own the data or the rights to the data needed to purchase / contract repair of this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists (QPLs), Qualified Product Databases (QPDs), Military Handbooks, and other standardized documents from the DoD Single Stock Point (DODSSP) at Document Automation and Production Service (DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSIST Help Desk at 215-697-2667 or 215-697-2179(DSN: 442-2667), or mail their requestDLA Document Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. All responsible sources may identify their interest and capability to respond to the requirement or submit proposals, quotations or capability statements. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days (30 days if award is issued under an existing Basic Ordering Agreement (BOA) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
DIBBS
SWITCH, PRESSUREThis contract is for the procurement of pressure switches under solicitation SPE7M8-26-T-5263, issued by the Department of Defense’s Defense Logistics Agency through its Electrical Devices Division. The item is sourced from Detroit Switch Inc with part number 444-10-XA1-444084XA-1 and is controlled by a source-limited drawing and limited rights data, meaning only vendors with direct access to the approved technical data or traceability to the approved source may submit quotes. The requirement is for 29 units with a unit price of $29.000, totaling $841.00, to be delivered FOB destination to the DLA New Cumberland Facility in Pennsylvania within 126 days of order. The NSN is 5930-01-451-2236, and delivery must strictly adhere to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including D3 unit containers and U pack code, with no special markings indicated. All items must comply with the DLA Master List of Technical and Quality Requirements, and the contract explicitly prohibits the use of Class I ozone depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific functional applications like batteries and instruments that meet NAVSEA 5100-003D secondary containment requirements. Hazard communication must follow DFARS 252.223-7001, and ocean transportation must use U.S.-flag vessels unless a waiver is obtained. The contract is subject to fixed-price terms under FAR clauses including inspection at destination, default provisions, changes, and small business representation requirements, with electronic invoicing mandated via WAWF. Offerors must hold a valid UEI and CAGE code, represent their small business status accurately, and be registered in SAM. The solicitation closed on July 29, 2026, with proposals submitted exclusively through the DIBBS portal.
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332919
New
Federal
48--VALVE,GLOBEThis contract is a firm fixed-price solicitation for the procurement of a globe valve identified by NSN 1H 4810 01-483-3715 X3, issued by the Naval Supply Systems Command Weapon Systems Support under solicitation number N0010426RBU53, with a closing date of August 7, 2026. The technical and quality requirements are governed by the Individual Repair Part Ordering Data (IRPOD), which supersedes all other referenced documents in case of conflict, and include mandatory compliance with MIL-I-45208 as supplemented by ISR-1, inspection and acceptance procedures, and first article testing requiring approval of one unit prior to production. The contractor must submit detailed pre-manufacturing, test, and supplier data packages at specified intervals—within 45 days after contract award and at contract completion—using standardized DD Form 1423 formats, with all submissions required to comply with NAVSUP-WSS-specific procedures and sequence control numbers. Packaging must adhere to MIL-PRF-23199, with strict cleanliness controls referenced from MIL-STD-767 and MIL-STD-2041, and mercury is strictly prohibited from contact with the hardware. All technical documents, including drawings and specifications, are accessible only through the secured logistics e-commerce portal and are marked NOFORN, requiring explicit government authorization for any foreign dissemination. The contractor must maintain a government-acceptable inspection system, retain all inspection records, and comply with cybersecurity maturity model certification and small business representation mandates, while also fulfilling mandatory submission of certified cost or pricing data and adhering to priority ratings for national defense and energy programs. Pricing is valid for 60 days after the closing date, with FOB destination delivery, electronic invoicing via WAWF, and contractual documents deemed issued upon electronic transmission.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
Federal
VALVE,MANIFOLD ASSYThis contract pertains to the procurement of a Valve, Manifold Assembly designated as Special Emphasis Material (Level I) for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or the vessel. The material must strictly conform to VACCO Drawing V3D10334 and applicable specifications including ASTM-B21, ASTM-B283, ASTM-B16, ASTM-B36, and ASTM-B121, with specific alloy and temper requirements for the sensing piston. Comprehensive quality assurance measures are mandated, including full traceability from raw material to finished component through unique heat-lot or traceability markings, 100% inspection of certification data, and mandatory submission of chemical and mechanical test reports. All welding, brazing, and repair operations must comply with S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, with procedures and qualification data requiring prior Navy approval; electronic signatures are accepted on certifications provided they are securely controlled and uniquely tied to authorized individuals. The contractor must maintain an ISO-9001 quality system aligned with ISO-10012 and ISO/IEC 17025 calibration standards and is subject to Government Source Inspection at the point of manufacture. All materials must be mercury-free, and any deviation or waiver from specifications requires formal approval by the Contracting Officer prior to implementation, with critical departures involving safety, performance, or structural integrity held to the highest scrutiny. Delivery and acceptance are governed by stringent procedural controls: all certification documentation must be submitted via Wide Area WorkFlow (WAWF) to Portsmouth Naval Shipyard with designated Ship to, Inspect by, and Accept by codes, and no material may be shipped without prior written acceptance. The contractor is required to flow down all quality, traceability, and certification requirements to sub-tier suppliers and must ensure subcontracted operations preserve traceability and compliance. Packaging must adhere to MIL-STD-2073, and configuration control is tightly managed under Engineering Change Proposal (ECP) protocols for any modifications affecting form, fit, function, or interface. The contract invokes Emergency Acquisition Flexibilities and is designated as a DPAS-rated order for national defense priority. Final acceptance hinges on zero-defect lot acceptance per ANSI/ASQ-Z1.4, with 100% verification of traceability, certifications, and compliance for every
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 332919
New
Federal
VALVE/ACTUATOR ASSYThis contract solicitation, numbered N0010426QLC26, is for the repair of VALVE/ACTUATOR ASSY units under a firm-fixed-price arrangement, with a mandatory Repair Turnaround Time (RTAT) of 180 days measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. The government requires strict compliance with technical documentation, including adherence to manufacturer specifications and MIL-STD-130 marking standards, and prohibits unauthorized substitutions without prior written approval. All repairs must be inspected and accepted by the Government, and contractors are responsible for maintaining complete inspection records for 365 days post-delivery. Delivery is FOB Origin, and freight is managed by Navy CAV or Proxy CAV under NAVSUPWSSFA24 or NAVSUPWSSFA25 guidelines. Late deliveries incur a per-unit, per-month price reduction, with the exact amount to be specified by the contractor, and failure to meet RTAT may lead to termination for default. The contract includes an option for increased quantities within 365 days of award, exercisable at the original unit price. Contractors must be authorized distributors of the original manufacturer, and proof of authorization must be submitted with their offer. Technical documents referenced in the contract must be obtained from official DoD portals or designated Navy offices, with strict controls on distribution, particularly for NOFORN or Official Use Only materials. The contract enforces Buy American and cybersecurity maturity model certification requirements, and small business subcontracting obligations are applicable. A fee cap is established for testing and evaluation if an asset is deemed beyond repair, and price comparisons to new unit costs must be included in the quote. The contract will be awarded bilaterally, requiring contractor acceptance before execution. All responses must include unit price, total price, and RTAT, with delays due to non-excusable causes resulting in financial penalties. The solicitation closes on August 10, 2026, and is issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, with primary contact provided via Navy email and phone.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 16 days
View Details
NAICS: 332919
New
Federal
48--VALVE,SAFETY RELIEF, IN REPAIR/MODIFICATION OFThis contract is a fixed-price repair requirement for the VALVE, SAFETY RELIEF, issued under solicitation N0010426QYAC6 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The contractor must restore the valve to “A” condition in accordance with original manufacturer specifications, drawings, and approved technical procedures, with all work governed by strict quality assurance protocols including MIL-STD-130 marking requirements and full inspection responsibility borne by the contractor. The contract mandates compliance with a 1-year warranty after delivery and allows 45 days from discovery of defects for corrective action. All repairs must be mercury-free, with strict prohibitions against contamination, requiring specific written approvals for any use of mercury as a functional component and detailed documentation of protective measures. The item must be shipped FOB destination, packaged per MIL-STD-2073, and tracked using unique identification as applicable. The estimated Repair Turnaround Time is 321.2 days, forming an enforceable delivery obligation unless excused by delay. The procurement is fully set aside for small businesses, with mandatory adherence to Buy American Act requirements, limitations on pass-through charges, and full compliance with the Small Business Subcontracting Plan. The contractor must be an authorized distributor of the original manufacturer’s part, evidenced by official documentation submitted with the offer. All documents referenced in the contract, including technical manuals and military standards, must be obtained through designated Government sources and handled according to their Distribution Statements to prevent unauthorized dissemination, particularly those marked NOFORN or “Official Use Only.” The contract requires adherence to the Workflow Pro Mod Assist Module for payment processing and enforces the use of Navy-approved invoice and receiving report procedures. Government inspection rights are reserved throughout performance, and all records must be retained for 365 days after final delivery. Security compliance is governed by recent class deviations, and certification of small business status, annual representations, and compliance with Free Trade Agreements are binding conditions of award.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 332919
New
Federal
VALVE, GLOBEThis contract pertains to the procurement of a 1/2 inch socket weld in-line stop valve with backseat, per NAVSHIPS drawing 803-2177525, for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or the vessel. The material is designated as SPECIAL EMPHASIS (Level I) and is subject to stringent traceability, quality assurance, and inspection controls. All components must meet exacting material specifications including ASTM-A105, ASTM-A182, ASTM-A193, ASTM-A194, and MIL-S-24093, with mandatory certification of chemical composition, mechanical properties, and heat treatment for each heat lot. The valve must undergo comprehensive non-destructive and pressure testing, including liquid penetrant or magnetic particle inspection on studs and nuts, dye penetrant inspection of hardfacing, and full assembly pressure testing with strict tolerances. First Article Testing is required on one unit, and contractor certification must include traceable, unqualified statements of compliance verified by electronic signatures meeting strict authentication protocols. Every part requires permanent, legible traceability marking conforming to MIL-STD-792, with unique lot identification preserved throughout all manufacturing and subcontracted operations. The contract mandates strict adherence to a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or an approved alternative under MIL-I-45208 and MIL-STD-45662, with full government inspection authority at source. All welding and brazing must be performed per S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with procedures and qualification data submitted for prior approval. Subcontractors are bound by the same requirements and must be pre-qualified by the prime contractor. All certifications, including those for hydrogen embrittlement relief, filler metal, and hardfacing, must be complete, signed, and traceable to individual components. Material must be 100% inspected for traceability, conformity, and documentation accuracy, with zero defect acceptance criteria for lot acceptance. The valve must be marked with the prescribed CID number, and no mercury or mercury-containing compounds may be present. The contract is issued under Emergency Acquisition Flexibilities, is DO certified under DPAS for national defense use, and
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 23 days
View Details
NAICS: 332919
New
Federal
48--VALVE, HULL/BACKUPThis contract pertains to the procurement of a 2-inch combination hull and backup ball valve designated as SPECIAL EMPHASIS material (Level I, Scope of Certification), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or the vessel. The valve must strictly comply with Naval Sea Systems Command drawing 6408529 and associated drawings, with precise material specifications for components such as the body, stems, nuts, and seats, including proprietary materials like MD71-GG Mearthane and SAE AMS 6931. All materials are subject to rigorous certification requirements, including quantitative chemical and mechanical analysis, nondestructive testing (liquid penetrant, ultrasonic, radiography, dye penetrant), and full traceability from raw material to finished component via unique heat, lot, or batch markings. The contract mandates compliance with ISO-9001 and related calibration standards, requires a documented quality system, and imposes strict controls on welding, brazing, and heat treating, particularly for K-MONEL and other high-strength alloys. Supplier qualification, subcontractor oversight, and government quality assurance at the source are mandatory, with all certifications and test data subject to 100% review and submission via the Electronic Contractor Data Submission system. The procurement is issued under Emergency Acquisition Flexibilities and is a total small business set-aside, requiring the offeror to hold a U.S. security clearance at Confidential level or higher due to classified documentation referenced in the solicitation. All contractual documents are deemed issued upon electronic transmission, and award requires bilateral acceptance. Delivery is FOB destination, with payment processed through Wide Area Workflow and certified by receiving reports. Warranty is one year from delivery, andBuy American and small business subcontracting requirements apply. Certain specifications, such as QQ-N-281 and ASTM-B369, are subject to deviations, and material substitutions require engineering approval. The valve must be free of mercury, use specified lubricants (MIL-PRF-27617 Type III), and be marked with a government-issued CID number. Radiography, dimensional controls, thread inspection using FED-STD-H28, and hydrostatic testing protocols—including confidential pressure reporting—are enforced. Final acceptance requires zero-defect sampling, full documentation traceability, and adherence to stringent configuration control and waiver procedures via the ECDS portal. The solicitation close date is extended to August 25, 2026, with inquiries directed to Heather Jones at the
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE, NEEDLEThe contract pertains to the procurement of a needle valve designated as special emphasis material (Level I, Quality Assured) for use in a critical shipboard system, where failure could lead to catastrophic consequences including loss of life or the vessel. All materials must comply strictly with Naval Ship System Command drawing 7067139 and associated specifications, including ASTM-B150 Alloy UNS C63200 Temper TQ50 or TQ55 for the valve body. Comprehensive certification and traceability requirements mandate that every component be uniquely marked with traceability identifiers linked directly to chemical and mechanical test reports, with inspections and controls extending through fabrication, welding, brazing, and subcontracted operations. All welds and brazing must adhere to S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with procedures and qualifications submitted for prior approval, and filler metals verified prior to use. Chemical and mechanical test reports must be complete, unqualified, and directly traceable to the material’s heat or lot number, with transcription prohibited and all certifications signed by authorized personnel. The contract enforces a zero-defect acceptance policy with 100% inspection of certification documents, traceability markings, non-destructive test results, and material compliance, supported by mandatory quality systems aligned with ISO-9001, ISO-10012, and ISO/IEC 17025. Government quality assurance is conducted at source, requiring prior notification of the Defense Contract Management Agency and on-site inspections. Delivery must occur within 365 days of contract award, with certification data submitted at least 20 days prior to each shipment for Portsmouth Naval Shipyard review and acceptance, using the WAWF system with updated DODAAC N50286. The order is designated as a “DO” rated priority under the Defense Priorities and Allocations System, subject to Buy American and Small Business set-aside provisions, and falls under Emergency Acquisition Flexibilities. All changes to configurations require formal Engineering Change Proposals, and waivers or deviations must be formally requested and approved by the Contracting Officer. Mercury-free compliance, proper packaging per MIL-STD-2073, and strict adherence to distribution statement controls are further mandatory conditions.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 332919
New
Federal
SEAT,VALVEThis contract pertains to the procurement of a valve seat designated as SPECIAL EMPHASIS material (Level I), intended for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or the ship itself. The item must strictly comply with Naval Sea Systems Command Drawing 7067896 and material specification ASTM-B505 Alloy C90300, with mandatory chemical and mechanical analysis, radiographic examination, and zero-defect acceptance criteria. Certification and traceability are tightly controlled throughout the supply chain, requiring unique heat-lot markings on each component that directly link to test reports, and all documentation must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard using designated DODAACs and notification emails. The contractor must maintain ISO-9001 and ISO-10012 quality systems with calibration per ANSI-Z540.3 and ISO/IEC 17025, and must submit comprehensive quality evidence including test certifications, radiographic films, shooting sketches, and reader sheets, all approved prior to shipment. No repair welding is permitted, and any deviations or waivers require prior written approval from the Contracting Officer and must be classified as Critical, Major, or Minor, with full justification and impact analysis. The material must be mercury-free, marked according to MIL-STD-792, and subjected to 100% inspection for traceability, certification completeness, and compliance with acceptance criteria from T9074-AS-GIB-010/271 and S9074-AR-GIB-010A/278. All subcontractors must be vetted and monitored for adherence to these stringent quality and traceability controls. Delivery is capped at 365 days after contract effective date, and the entire order is DO-rated under the Defense Priorities and Allocations System for national defense urgency. The contract further mandates submission of engineering change proposals for any configuration changes, and incorporates strict Buy American and small business subcontracting requirements. All documentation must be electronically submitted through ECDS and WAWF, with final acceptance withheld until certification data is reviewed and approved, and no material may be shipped prior to such acceptance.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 23 days
View Details
NAICS: 332919
New
Federal
NEEDLE,VALVEThis contract pertains to the procurement of a valve needle designated as SPECIAL EMPHASIS material (Level I), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must strictly comply with NAVSHIPS drawing 609-4775887 and material specification ASTM-B150, Alloy C63200, Temper TQ50, with full chemical and mechanical traceability required from raw stock to finished component. Every unit must carry a permanent, legible traceability mark linked to certified test reports, and all processing steps—especially welding, brazing, and heat treatment—must maintain this traceability and be documented with approved procedures and qualifications. Electronic certifications and signatures are mandated and must be controlled to ensure authenticity and non-repudiation, with no disclaimers permitted on compliance documents. All deliveries require prior review and acceptance of certification data through the Wide Area WorkFlow system, with specific electronic submission parameters to Portsmouth Naval Shipyard using DODAAC N50286 and notification to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. No material may be shipped until formal acceptance is received. Quality assurance is stringent, requiring ISO-9001 compliance with supplemental calibration standards ISO-10012 and ISO/IEC 17025, and direct government inspection at source. Welding procedures, including hardfacing and titanium applications, must be pre-approved with submitted qualification records, and weld filler metals require independent certificates of compliance. All subcontractors must adhere to these requirements, and any deviation or waiver, even minor, must be formally approved by the Contracting Officer. Delivery of the final product is capped at 365 days after contract effective date, and all items are subject to zero-defect acceptance criteria under ANSI/ASQ Z1.4, with 100% inspection of traceability, certifications, and non-destructive test data. The contract is issued under Emergency Acquisition Flexibilities and is DO-rated for national defense priority under DPAS.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 23 days
View Details
NAICS: 332919
New
Federal
VALVE,CHECKThe contract pertains to the procurement of a check valve under solicitation N0010426QEB74, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical (NAVSUP WSS-MECH), with a response deadline of August 25, 2026. The work is governed by a complex framework of military specifications, quality assurance standards, and procedural requirements, with the Individual Repair Part Ordering Data (IRPOD) serving as the primary source for technical and quality requirements. Compliance with the IRPOD is mandatory, and all referenced drawings, specifications, and technical data must be used in their entirety at the specified revision levels unless otherwise approved in writing by the Contracting Officer. The contract imposes strict controls on document revision use, prohibits partial use of document revisions, and requires advanced waiver requests for any non-conformances with detailed justification, including technical data supporting proposed alternatives. Inspection and acceptance are tied to the IRPOD and follow the inspection system program plans, with records to be maintained throughout contract performance and beyond. Packaging must adhere to MIL-PRF-23199 and related standards, with specific clarifications on the use of MIL-DTL-24466 green poly bags under cleanliness control requirements, and the use of fire-retardant packaging is explicitly prohibited. Mercury and mercury-containing compounds are strictly excluded from materials under this contract. All contractual documents are considered issued upon electronic transmission or fax, and submissions, including repair part ordering data, pre-manufacturing procedures, and test inspection reports, must follow strict formatting and submission timelines tied to the DI-QCIC-8871 and DI-QCIC-8872 standards. First submissions for pre-manufacturing documentation are due 45 days after contract award, while final inspection and test reports are due at contract end. Submissions must be segregated by contract number, national stock number, and item nomenclature, and must be routed to NAVSUP-WSS Code N9433 for review. The contractor must register with and access documents via the BPMI e-Commerce website, which requires password authentication, and must comply with Noforn restrictions on distribution of technical documents, requiring prior Naval Sea Systems Command approval for any transmittal to foreign nationals. The contract mandates the use of Wide Area Workflow for invoice and receiving reporting, prohibits the intentional addition of mercury, enforces strict quality assurance systems, and requires full compliance with cybersecurity maturity model certification and small business representation requirements. Pricing
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
UNION,TUBE TO BOSSThis contract specifies the procurement of a tube-to-boss union component for use in a critical shipboard system, where failure could lead to catastrophic outcomes including loss of life or vessel integrity. The item must comply with stringent quality and traceability standards as Special Emphasis Level I material, requiring full certification of chemical composition, mechanical properties, and non-destructive testing, particularly for SAE-AMS-QQ-S-763 Class 304 and QQ-N-281 materials. All materials must be traceable from heat lot to final product via permanent markings, with documentation verifying compliance through certified test reports that cannot include disclaimers or qualifiers. The contractor must maintain an ISO-9001 or MIL-I-45208 quality system, with government inspection at source, and all welding, brazing, and machining must adhere to S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278 standards with prior procedure approval. Delivery is subject to a strict 365-day timeline from contract effective date, with certification data submitted via WAWF to Portsmouth Naval Shipyard, using DODAAC N50286 for shipping and inspection, and must be reviewed and accepted prior to shipment. The contract mandates zero-defect acceptance criteria, 100% inspection of traceability and certification documents, and prohibits mercury or unauthorized material substitutions. Subcontractors must be vetted and their quality controls aligned with prime contractor obligations, while all waivers, deviations, and engineering changes require formal government approval. The order is DO-rated under DPAS for national defense priority, issued under Emergency Acquisition Flexibilities, and falls under a total small business set-aside, with all documentation and data subject to strict security and distribution controls per OPNAVINST 5510.1. Final delivery must be accompanied by fully compliant certificates of compliance, verified weld filler metal documentation, and confirmed oxygen cleaning per MIL-STD-1330.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 20 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 811210
New
Federal
58--PROJECTOR,SONAR, IN REPAIR/MODIFICATION OFThe contract involves the repair of fifteen units of NSN 5845-015035473, a sonar projector, under the authority of FAR 6.302-1, allowing for non-competitive solicitation due to the unique nature of the part and lack of available data rights. The Government does not own the technical drawings, designs, or data necessary to procure repairs from alternative sources, and reverse engineering or purchasing the rights to the data has been deemed uneconomical. Repairs must be conducted in accordance with Reference 400131-501, and no new procurement or replacement of the units is permitted. All repair work is to be performed with the understanding that the part cannot be sourced commercially or from other vendors due to proprietary and technical restrictions. Delivery is FOB origin, meaning the contractor assumes responsibility for the item once it leaves their facility. The solicitation, identified by number N0010426RND71, is posted as a presolicitation with a response deadline of September 8, 2026. Proposals submitted within 45 days of publication, or 30 days if under an existing Basic Ordering Agreement, will be considered, though no competitive procurement is guaranteed. Only offerors who meet qualification requirements at the time of award, as defined by FAR clause 52.209-1, will be eligible for contract award. Market research confirms the Government is not utilizing commercial item acquisition policies under FAR Part 12, although interested parties may nonetheless indicate if they can supply a commercial item alternative within 15 days. Technical documentation referenced in the repair process is not housed at DODSSP and must be accessed through ASSIST-Online or ordered via the DODSSP website after account registration. The point of contact for additional information is Rachel E. Kern, with the office located in Mechanicsburg, Pennsylvania, under the Naval Supply Systems Command Weapon Systems Support.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332996
New
Federal
28--LEVER PLATE SPECIALThe Government is seeking to procure three units of the NSN 1H-2825-014815072-X3, identified as a 28–LEVER PLATE SPECIAL, under a sole-source contract authorized by FAR 6.302-1 due to the unavailability of competitively sourced alternatives. The Government does not own or have access to the technical data rights necessary to procure repairs or replacements from other sources, and both acquiring those rights and reverse engineering the part have been deemed uneconomical. Deliveries are required to two designated locations: W25G1U at DLA Distribution in New Cumberland, Pennsylvania, and W62G2T at DLA Distribution in Tracy, California. Although this notice is not a request for competitive bids, interested parties may submit capability statements or proposals within 45 days of the publication date, or 30 days if awarded under an existing Basic Ordering Agreement, to be considered for award. The Government reserves the right to determine whether competition is feasible based on submissions and will only award if the offeror, product, or manufacturer meets all qualification requirements at the time of award, as per FAR clause 52.209-1. Market research confirms that the acquisition does not fall under FAR Part 12 commercial item procedures, though vendors may still indicate if they can provide an equivalent commercial item within 15 days of notice. All inquiries and qualification details must be directed to the primary point of contact, Melissa A. Farness, at NAVSUP Weapon Systems Support Mech in Mechanicsburg, Pennsylvania.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334519
New
Federal
66--CAISSON GAGEThe government intends to procure 70 units of NSN 3H-6685-017341193-D4, identified as a CAISSON GAGE, under a non-competitive solicitation authorized under FAR 6.302-1, with delivery directed to the Portsmouth Naval Shipyard in Kittery, Maine. All interested parties may submit proposals, quotations, or capability statements within 45 days of the synopsis publication or 30 days if under an existing Basic Ordering Agreement, but this notice does not constitute a request for competitive bids. The Government retains full discretion to determine whether to proceed with a sole-source award based on responses received. The procurement is managed by the Naval Supply Systems Command Weapon Systems Support, with the primary point of contact being Noelle M. Smith, available by phone or email through the official Navy domain. The solicitation was posted on July 25, 2026, and responses are due by August 10, 2026, with the contracting office located in Mechanicsburg, Pennsylvania.
Other Measuring and Controlling Device Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541330
New
Federal
Quality Testing and Inspection ServicesThe contract calls for comprehensive independent quality assurance testing services for defense-related components, requiring 100 percent electrical testing, detailed visual inspections, and batch-level production lot evaluations to ensure conformance with stringent military standards. All testing must be completed and documented prior to delivery, with final approval contingent upon Government authorization via DD Form 1423, which certifies that all product requirements have been met and the items are fit for official use. The services are classified as a subcontract under NAICS code 541330, indicating specialized engineering and technical testing support, and are being procured by the Naval Supply Systems Command Weapon Systems Support Mechanical under the Department of Defense. Proposals must be submitted by September 25, 2026, with no setaside designation specified, and the work will be performed at an undefined location under the oversight of the agency responsible for weapon systems readiness and logistics support.
Engineering Services

POSTED

1 day ago

DEADLINE

in 2 months
View Details
NAICS: 323113
New
Federal
Military Marking and Labeling ServicesThe contract requires the application of durable military-standard labels and markings in compliance with MIL-STD-129 and MIL-STD-130 specifications, ensuring that all items are properly identified with Data Matrix barcodes, DLR labels, and container identification markings. These markings must be robust enough to withstand harsh environmental conditions encountered in military operations and storage, with precise adherence to formatting, placement, and material requirements dictated by the standards. The work will involve labeling individual items, unit packs, and shipping containers to maintain traceability and logistics accuracy across the Department of Defense supply chain. This subcontract is issued under NAICS code 323113, which covers printing and related support activities, and is part of the Naval Supply Systems Command Weapon Systems Support Mechanism’s efforts to ensure standardized identification throughout military equipment distribution. The solicitation was posted on July 24, 2026, with responses due by September 25, 2026, and performance is expected to support defense logistics operations without a specified geographic restriction. The contract does not include a set-aside designation, and while no point of contact or detailed place of performance is provided, the work must be executed in a manner that meets all federal and Department of Defense labeling mandates.
Commercial Screen Printing

POSTED

1 day ago

DEADLINE

in 2 months
View Details
NAICS: 561910
New
Federal
Military Packaging and Preservation ServicesThis contract requires the packaging and preservation of rubber tiles in strict accordance with U.S. military standards, ensuring long-term protection during storage and transport. For overseas shipments, the work must comply with MIL-STD-2073-1, which governs military packaging, preservation, marking, and packing requirements, while shipments within the Continental United States must meet ASTM D3951-18 standards for commercial packaging and preservation practices. The use of QPL-listed barrier materials is mandatory to maintain environmental protection against moisture, corrosion, and contamination throughout the supply chain. The task is structured as a subcontract under NAICS code 561910 and is solicited by the Naval Supply Systems Command Weapon Systems Support for the Department of Defense. Proposals must be submitted by September 25, 2026, and performance is expected to align with federal defense logistics protocols without specified geographic constraints for the place of performance.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 2 months
View Details
NAICS: 326299
New
Federal
Manufacture of Interlocking Rubber Tiles (Multiple Thicknesses)The contract entails the production of interlocking rubber tiles in multiple thicknesses to meet exacting military specifications, ensuring full compliance with National Stock Numbers, designated part numbers, technical data packages, and applicable material standards. The work requires adherence to precise engineering and quality control protocols to guarantee performance under demanding operational conditions, with all products subject to rigorous verification against government requirements. The manufacturing process must align with the North American Industry Classification System code 326299, indicating specialized rubber product manufacturing outside of standard tire or tube production. This is a subcontract opportunity issued by the Naval Supply Systems Command Weapon Systems Support, under the U.S. Department of Defense, with a response deadline set for September 25, 2026. The place of performance is unspecified, and no set-aside classification is indicated, meaning eligibility is open to all qualified vendors regardless of size or designation. There is no designated point of contact provided, and inquiries must be directed through the official SAM.gov portal. All proposals must demonstrate capacity to consistently deliver high-volume, specification-compliant rubber flooring solutions suitable for military installations and equipment environments.
All Other Rubber Product Manufacturing

POSTED

1 day ago

DEADLINE

in 2 months
View Details
NAICS: 332710
New
Federal
CHASSIS,ELECTRICAL-This contract pertains to the manufacture and delivery of the CHASSIS,ELECTRICAL- under solicitation N0010426QND50, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The requirement is issued under Emergency Acquisition Flexibilities and will be awarded bilaterally upon written contractor acceptance. The item must conform to specific Cage Code 0KPC5 and reference number CCHA40450, and must be marked in accordance with MIL-STD-130 Rev N. All substitutions or design changes require prior written approval from the NAVICP-MECH Contracting Officer, classified under six defined change codes, with Code 1 allowing only part number changes when parts are identical. Strict mercury-free standards are enforced due to the item’s use on submarines and surface ships; no metallic mercury or contamination is permitted unless explicitly approved with detailed justification, protective measures, and labeling. The contractor must ensure all subcontractors comply with these restrictions and maintain inspection records for 365 days after final delivery. Quality assurance responsibilities rest entirely with the contractor, who must implement their own inspection systems to ensure compliance and may be subject to government verification at any time. Packaging must adhere to MIL-STD-2073 as specified in the schedule. The solicitation mandates that only authorized distributors of the original equipment manufacturer may respond, requiring proof of authorization signed on company letterhead. Compliance with Buy American provisions, Defense Priorities and Allocations System (DPAS) certification, and cybersecurity maturity model requirements is mandatory. The contract includes provisions for small business set-asides, subcontracts, and the mandatory use of Workflow Pro’s Assist Module for payment processing via receiving report and invoice combinations. All contractual documents are considered officially issued upon electronic transmission, and distribution of any Navy-provided documents is controlled under one of seven distribution statement codes, with NOFORN and Official Use Only materials requiring specific certification. Respondents must submit proposals before the deadline of August 10, 2026, to the designated point of contact.
Machine Shops

POSTED

1 day ago

DEADLINE

in 16 days
View Details
NAICS: 336612
New
Federal
CONNECTOR,THRU-HULLThis contract pertains to the procurement of a thru-hull connector assembly designated as SPECIAL EMPHASIS MATERIAL (Level I), critical to the safe operation of shipboard systems where failure could result in catastrophic loss of life, vessel, or mission. The item must comply with specification CPG 1025 and associated drawings, with strict requirements for material composition, welding, inspections, and traceability. All critical components—including the penetrator body, cover, nut, and washers—must be manufactured from QQ-N-286 or QQ-N-281 material with full quantitative chemical and mechanical certification, and each lot must be traceable via unique heat or lot numbers permanently marked on the part or an attached durable tag. Welding procedures and qualifications must be submitted for pre-approval prior to any production or repair welding, and all welds must conform to S9074-AQ-GIB-010/248 or 0900-LP-001-7000. Material certifications must be submitted electronically via WAWF to Portsmouth Naval Shipyard (N50286) for review and acceptance prior to shipment, with no material permitted to leave the contractor’s facility without formal acceptance. The contractor is required to maintain a documented quality system compliant with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662, subject to government source inspection by DCMA. First Article Testing of one unit must be conducted at Portsmouth Naval Shipyard under government supervision, and all non-destructive and destructive tests, including ultrasonic inspection, dye penetrant testing, and hardness verification, must be performed per specified standards and documented with full traceability to the tested component. Electronic signatures on certifications are permitted but must be controlled, uniquely attributed, and tamper-evident. No molybdenum disulfide lubricants are allowed; only A-A-59004 anti-galling compound may be used on threads. The contract mandates 100% inspection of certification data and traceability markings, zero-defect acceptance criteria, and full compliance with Buy American and Small Business Subcontracting requirements. Delivery of all materials is due no later than 365 days after contract award, with certification data for weld procedures and material testing due 20 days prior to each shipment. This solicitation is issued under Emergency Acquisition Flexibilities and carries a “DO”
Boat Building

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 333998
New
Federal
CANISTERThis contract pertains to the procurement of a specialized CANISTER designed for use in a critical shipboard system, where any failure could result in catastrophic consequences including loss of life, ship damage, or system failure. The item is classified as SPECIAL EMPHASIS MATERIAL (Level I) and is subject to stringent quality control, traceability, and inspection protocols under the Deep Submergence Systems Program. The contractor must comply with ISO-9001 or equivalent quality systems, maintain traceability from raw material to finished product using MIL-STD-792-compliant markings, and ensure 100% inspection of all Objective Quality Evidence and certification documents. All materials must conform to NAVSEA SS521-AM-MMA-010 Chapter 7, Navy part number 3.80.1018-3, and meet strict toxicity and flammability standards per NAVSEA SS800-AG-MAN-010/P-9290. Mercury and mercury-containing compounds are prohibited, and configuration control is strictly enforced through Engineering Change Proposals for any modifications affecting form, fit, function, or interface. The contract mandates zero-defect acceptance criteria for lot inspections, with sampling governed by ANSI/ASQ Z1.4 or full lot inspection for small batches. All compliance documentation, including Certificates of Compliance, must be submitted electronically via Wide Area Work Flow prior to delivery and must contain precise traceability to individual units, NSNs, and material certifications with no disclaimers or ambiguities. Certification data must be reviewed and accepted by Portsmouth Naval Shipyard six working days before final delivery, which is due within 210 days of contract award. Subcontractors are bound by the same quality requirements and must be notified of required Government inspections. The contractor must provide records of all inspections, calibrations, and nonconformances, and any waivers or deviations require prior written approval from the Contracting Officer with classification as Critical, Major, or Minor. Government Source Inspection by DCMA is mandatory at the contractor’s facility, and all packaging must conform to MIL-STD-2073. The contract further enforces Buy American provisions, Small Business Set-Aside status, and strict security restrictions in accordance with recent DOD deviations. All documentation submissions, including waiver requests and quality system procedures, must be processed via the Electronic Contractor Data Submission system, requiring PKI/CAC authentication. Final shipment is prohibited until formal acceptance is granted through WAWF with designated inspection and
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 30 days
View Details