Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

4x4 Vehicle Conversion Engineering and Integration

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the engineering and integration of four-wheel drive systems into General Motors vans using original equipment manufacturer components. The project requires maintaining the vehicle's original ride height, center of gravity, and all OEM safety features to ensure seamless performance and safety compliance. The work is categorized under the NAICS code 336310, which pertains to motor vehicle manufacturing. Awarded as a subcontract and managed by the Department of Justice through Federal Prison Industries, the contract focuses on modifying GM vans to enhance their drivetrain capabilities without compromising structural or safety standards. While specific location details and solicitation numbers are not provided, the contract was posted on November 13, 2025, and is aimed at specialized vehicle conversion engineering and integration services.

General Info

Engineering and integrating four-wheel drive systems into GM vans preserving OEM safety and performance.

Agency

Department Of Justice → Inc Federal Prison Industries

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

Place of Performance

DC

Set-Aside

NONE

Documents

This scope was carved out of FLEET01-25.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

4X4 UPFIT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 13

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Justice → Inc Federal Prison Industries

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Justice → Inc Federal Prison Industries

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Engineering and integration of 4x4 drive systems into GM vans using OEM components, maintaining original ride height, center of gravity, and all OEM safety systems.

Similar Contracts

Same NAICS industry code

Supply of Collar Assembly, Valve (NSN 4820-01-362-5883)This subcontract, issued by the DLA Weapons Support Nuclear Reactor Program under the Department of Defense, requires the manufacture or sourcing of eight Valve Collar Assemblies, identified by NSN 4820-01-362-5883. The contractor must ensure all units meet strict technical specifications, specifically excluding the use of additive manufacturing processes. Compliance with MIL-STD 129 for marking and RP001 for DLA packaging is mandatory for all deliverables. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336310, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

Engine Crankshaft Supply (NSN 2815-01-717-8078)This subcontract involves the procurement of one Engine Crankshaft to support prime contractors under DLA Weapons Support contracts. The selected provider is responsible for manufacturing or sourcing a crankshaft that strictly conforms to NSN 2815017178078 and the DLA Master List of Technical and Quality Requirements RA001. Additionally, the contractor must ensure all marking is performed in accordance with MIL-STD-129 and deliver the packaged item FOB Origin. Managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, the contract falls under NAICS code 336310. The place of performance is located in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

STEM, NEEDLE VALVE

Solicitation # SPE7MC-27-T-1312

Solicitation SPE7MC-27-T-1312 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of one needle valve stem, identified as NSN 4820016239450 and manufacturer part number D49-8-13-M from Dante Valve Company. Designated as a critical application item, the supply must be delivered to the USS Tripoli LHA 7 within 20 days after receipt of the order, with an original required delivery date of October 22, 2026. The contract specifies FOB Destination for both inspection and acceptance. The procurement includes strict technical and quality requirements per the DLA Master List (RA001) and mandates compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury. The contractor must adhere to various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

REGULATOR, ENGINE GE

Solicitation # SPE7L1-27-T-2899

Solicitation SPE7L1-27-T-2899 is a Women-Owned Small Business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of 155 units of GE Engine Regulators (NSN 2920-01-728-9980). This is a restricted source item requiring engineering source approval by the government design control activity. The required delivery date is November 9, 2026, with a delivery timeline of 40 days after order. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA Master List technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. Key regulatory clauses are incorporated, including DFARS requirements for safeguarding covered defense information, cyber incident reporting, and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

TANK, FUEL, ENGINE

Solicitation # SPE7L1-27-U-0154

Solicitation SPE7L1-27-U-0154 is a request for quotations for the procurement of engine fuel tanks, identified by NSN 2910016453684. This is a total small business set-aside for a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000 dollars. The estimated annual quantity is 20 units, with a guaranteed contract minimum of 3 units. Delivery is required within 123 days after delivery order, and the contract may result in a one-year period of performance. The procurement is subject to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, with specific emphasis on configuration change management and qualified products lists. Inspection and acceptance will occur at the origin, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging must adhere to ASTM D3951 and MIL-STD-129. The award will be made to the responsible offeror whose quote is most advantageous to the government based on price and other factors. Compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements is mandatory.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-2708

Solicitation SPE7L1-27-T-2708 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of six O-rings under NSN 5331-01-515-0324. The requirement specifies that all items must be free of asbestos and cannot contain Class I ozone-depleting chemicals. Hardware must be manufactured according to the current revision of the applicable part standard. Delivery is required by March 8, 2027, with the place of performance and acceptance located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict packaging and quality standards, requiring items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Inspection and acceptance will occur at the destination, with sampling conducted according to MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Berry Amendment and Buy American Act. Evaluation preferences are provided for HUBZone Small Business Concerns, and offers utilizing additive manufacturing are ineligible for award.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

PUMP, FUEL, ELECTRICAL

Solicitation # SPE7M4-27-T-1936

Solicitation SPE7M4-27-T-1936, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of one electrical fuel pump, identified as a critical application item from Cummins Inc. with NSN 2910-01-605-5576. The requirement is managed under NAICS code 336310 and specifies a delivery timeframe of 20 days after order, with an original required delivery date of October 28, 2026. Shipping is designated as FOB Origin, with delivery locations in Italy and a parcel post address in the United States. The contract mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 for palletization. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and specific cybersecurity reporting standards under DFARS 252.204-7012. Quotes are to be submitted through the DIBBS portal.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-2854

Solicitation SPE7L1-27-T-2854 is a request for quotations from the DLA Weapons Support Land Supply Chain for the procurement of two O-rings, identified by NSN 5331-01-687-3913. The items are designated as critical application items and are to be delivered to the USS Cooperstown LCS 23 with an original required delivery date of October 26, 2026. Delivery is specified as FOB Destination, with inspection and acceptance also occurring at the destination. The procurement is governed by NAICS code 336310 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. Due to the potential for ultraviolet ray deterioration, the O-rings must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. General packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively. The items have a non-extendable shelf life of 180 months. The contract includes various federal and defense clauses, including requirements for safeguarding covered defense information, hazardous material identification, and the Buy American Act. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system. Quotations are due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

BURNER, FUEL PUMP

Solicitation # SPE8E6-27-T-0444

Solicitation SPE8E6-27-T-0444, issued by DLA Troop Support Construction and Equipment, is a small business set-aside for the procurement of 11 fuel pump burners under NSN 4230-01-524-6628. The items are to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of May 12, 2027, and a need ship date of April 26, 2027. The delivery window is specified as 167 days after award. Inspection and acceptance will occur at the point of origin, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331 with a zero-nonconformance requirement for acceptance. The contract imposes strict technical and regulatory requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates significant security and export controls, specifically RD002 for covered defense information and RQ032 for the export control of technical data under ITAR and EAR regulations. Contractors must comply with the Buy American Act and the Berry Amendment for domestic sourcing. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to NIST SP 800-171 and CMMC Level 2 cybersecurity standards. Price evaluation preferences are available for HUBZone small business concerns, and the buy may be subject to automated award.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

COLLAR ASSEMBLY, VALVE

Solicitation # SPE7M2-27-T-0447

Solicitation SPE7M2-27-T-0447 is a request for quotations issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of eight valve collar assemblies, identified by NSN 4820013625883. This critical application item, specifically Curtiss-Wright Electro-Mechanical part number 12575F18, is subject to a delivery window of 167 days, with a need ship date of April 26, 2027, and an original required delivery date of March 7, 2028. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement includes strict technical and quality requirements, prohibiting the intentional addition of mercury or mercury-containing compounds and banning the use of additive manufacturing unless specifically authorized. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. This is not a small business set-aside, and offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7M0-27-T-0813

Solicitation SPE7M0-27-T-0813 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of two O-rings (NSN 5331-01-669-5446). The requirement is under NAICS code 336310, with a delivery timeline of five days after receipt of order and a required delivery date of October 26, 2026. Delivery is FOB Origin to the Naval Facility in Everett, Washington, with both inspection and acceptance occurring at the destination per FAR 52.246-1. The contract mandates strict adherence to technical and quality requirements, including supply chain traceability documentation and the prohibition of asbestos and class I ozone-depleting chemicals. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 for UV protection, while marking must follow MIL-STD-129 with a specific shelf-life code. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold. All quotations must be submitted through the DIBBS portal by November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

ADJUSTING, SCREW VAL

Solicitation # SPE7MC-27-T-1311

Solicitation SPE7MC-27-T-1311 is a small business set-aside fixed-price contract issued by the Defense Logistics Agency for the procurement of one copper alloy end item angle valve, specifically an adjusting screw valve. The requirement identifies the item under NSN 4820-01-486-4802, referencing Dante Valve Company part numbers B4024 and D4000FF. The item is designated as a critical application item and must be delivered FOB Destination to the USS Makin Island (LHD 8) at FPO AP 96672. The original required delivery date is June 25, 2026, with a delivery lead time of 20 days after award. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and prohibits the intentional addition of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment, and compliance with the Buy American Act and DFARS cybersecurity and telecommunications regulations.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Justice → Inc Federal Prison Industries

Same awarding agency

Supplier of Telematics Fuel Monitoring Device Kits (Master-System-A)This subcontract, issued by Federal Prison Industries under the Department of Justice, requires the supply of 300 Telematics Fuel Monitoring Device Kits, specifically Part Number KITO759 Master-System-A. Each kit must be complete with fill rings, RFID modules, base modules, 15-foot extension cables, OBD11 cables, wake-up wires, installation hardware, and instructions. All provided equipment must comply with the Buy American, Free Trade Agreements, and Israeli Trade Act regulations. The completed kits are to be delivered to Bastrop, Texas, to support prime contractors on UNICOR Bastrop AIMS Units projects. This opportunity is designated as a total Small Business Set Aside under NAICS code 334418. The response deadline for this requirement is November 4, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 13 hours ago

DEADLINE

CW27-012BA UNICOR BASTROP AIMS UNITS TELEMATICS

Solicitation # 1600004156

Federal Prison Industries, Bastrop, is soliciting proposals under solicitation number CW27-012BA for the procurement of 300 units of Telematics Fuel Monitoring Device Kits, specifically the Master-System-A, part number KITO759. Each kit must include a fill ring, RFID module, base module, 15-foot extension cable, cable type OBD11, and a wake-up wire, along with all necessary hardware and installation instructions. This is a total small business set-aside under NAICS code 336320, and the award will be made to a single responsible business based on best value, evaluating price, technical acceptability, delivery time, and past performance. The contract is governed by FAR 13 Simplified Acquisition Procedures and includes specific clauses such as the Buy American-Free Trade Agreements-Israeli Trade Act and Equal Opportunity for Workers with Disabilities. Deliveries must be completed by December 2, 2026, and shipped to the UNICOR Federal Prison Industries facility in Bastrop, Texas. All inquiries and electronic quotations must be submitted in writing to Contracting Officer Chelsea Walker by the specified deadline of November 4, 2026. No telephone inquiries are permitted.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Architect & Engineering Services, Indefinite-Delivery, Indefinite-Quantity (IDIQ) Multiple Award (A&E) Contracts needed for new construction, renovation, alteration and repairs required by Federal Prison Industries (FPI)

Solicitation # SVO237-26

Federal Prison Industries (FPI), a component of the Department of Justice, is soliciting a competitively negotiated, 8(a) set-aside, Multiple Award Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for professional architectural and engineering (A&E) services. The contract supports new construction, renovations, alterations, and repairs at FPI facilities located within the contiguous United States. The scope of work includes design review, production of construction documents, detailed cost estimation, value engineering, project scheduling, and comprehensive project lifecycle support from initial studies through closeout. All work must adhere to IBC, ABA, NFPA, and NEC standards, as well as applicable environmental regulations. The contract structure consists of a one-year base period with four optional one-year extensions, featuring a guaranteed minimum of 10,000 dollars per awardee for each period. In accordance with the Brooks Architect-Engineer Act, awards are based on a Qualifications-Based Selection (QBS) process evaluating professional qualifications, specialized experience, capacity, past performance, and technical approach. Final selection is based on proposed hourly rates, overhead, and profit found to be fair and reasonable, subject to a statutory fee limitation of six percent of the estimated construction cost. Contractors must comply with stringent security and privacy requirements, including Public Trust positions for employees, mandatory non-disclosure agreements, and strict adherence to DOJ Order 0904 for safeguarding personally identifiable information. All tasks must be performed on authorized government networks using government-furnished equipment. Administrative requirements include detailed invoicing procedures and mandatory training on cybersecurity and records management.

Architectural Services

POSTED

about 13 hours ago

DEADLINE

Architect & Engineering Services, Indefinite-Delivery, Indefinite-Quantity (IDIQ) Multiple Award (A&E) Contracts needed for new construction, renovation, alteration and repairs required by Federal Prison Industries (FPI)

Solicitation # DJU1630000393

Federal Prison Industries (UNICOR) is soliciting proposals for an Indefinite-Delivery, Indefinite-Quantity (IDIQ) Multiple Award contract for Architect and Engineering (A&E) services. The scope of work includes new construction, renovation, alteration, and repairs, with specific task order components covering pre-design site visits, design development, construction documents, bid notification services, and construction administration. This is an 8(a) set-aside procurement with a performance period consisting of a one-year base period and four optional one-year extension periods, totaling up to 60 months. The contract is structured as a Firm Fixed Price agreement using loaded hourly rates, with a guaranteed minimum of 10,000 dollars per awardee for each contract period and a statutory fee limitation of six percent of the estimated construction cost. Selection is conducted via Qualifications-Based Selection (QBS) in accordance with the Brooks Architect-Engineer Act. Offerors must submit SF 330 Parts I and II and demonstrate competence in professional qualifications, specialized experience in correctional environments, capacity, past performance, technical approach, and geographic knowledge. Once qualifications are met, the final award is based on the proposal of fair and reasonable hourly rates, overhead, and profit. Due to the nature of the work, contractor personnel will occupy Public Trust Positions and must adhere to strict Department of Justice security protocols, including non-disclosure agreements, mandatory cybersecurity training, and rigorous PII safeguarding requirements. Proposals are due by October 31, 2026.

Architectural Services

POSTED

about 13 hours ago

DEADLINE

Agricultural Chemical and Nutrient SupplyThis subcontract, titled Agricultural Chemical and Nutrient Supply, is issued by Federal Prison Industries under the Department of Justice to support prime contractors on FCC Lompoc Farm projects. The selected provider is responsible for supplying a comprehensive range of agricultural materials, including fertilizers, plant nutrients, pesticides, herbicides, fungicides, and side-dress materials. To ensure safety and compliance, the contractor must provide all necessary manufacturer labels and Safety Data Sheets for every material delivered. The contractor is required to adhere strictly to all local, state, and federal regulations governing the sale and transport of agricultural chemicals. Performance of the contract will take place in Lompoc, California, with the scope of work encompassing both the physical delivery of chemical products and the provision of required SDS documentation. The response deadline for this opportunity is November 17, 2026.

Hardware Retailers

POSTED

DEADLINE

Chemical and Fertilizer Application ServicesThis subcontract for Chemical and Fertilizer Application Services involves the application of agricultural chemicals and nutrients for prime contractors at FCC Lompoc Farm. The scope of work includes the use of side-dress and line spray methods to apply fertilizers, pesticides, herbicides, and fungicides. The contractor is responsible for transporting all chemicals to the site, delivering completed crop treatments, and submitting required pesticide usage reports to the County Agricultural Commissioner. To qualify, the provider must possess specialized spraying equipment and maintain all necessary federal, state, and local application licenses. This opportunity is associated with Federal Prison Industries under the Department of Justice, with a response deadline of November 17, 2026. Performance will take place in Lompoc, California.

Pesticide and Other Agricultural Chemical Manufacturing

POSTED

DEADLINE

Pest Control Adviser (PCA) and Crop Scouting ServicesThis subcontract for Pest Control Adviser (PCA) and Crop Scouting Services supports FCC Lompoc Farm projects under the Department of Justice and Federal Prison Industries. The selected provider will conduct weekly physical inspections of crop fields to identify pests, diseases, weeds, and nutrient deficiencies. Based on these findings, the contractor is responsible for developing Integrated Pest Management recommendations and determining fertilizer requirements, delivering detailed reports that specify products, application rates, and timing. To qualify for this engagement, the provider must employ a certified and trained Pest Control Adviser holding all applicable licenses. The scope of work focuses on the delivery of comprehensive field scouting and treatment plan reports to ensure optimal crop health. The performance of these services will take place in Lompoc, California, with a response deadline set for November 17, 2026.

Environmental Consulting Services

POSTED

DEADLINE

Chemicals and Spray Application

Solicitation # SV0101-27

Solicitation SV0101-27 is a combined, indefinite delivery, indefinite quantity contract issued by Federal Prison Industries (UNICOR) for the Department of Justice. The contract provides for the procurement and application of agricultural chemicals, including fertilizers, pesticides, herbicides, and fungicides, as well as weekly crop scouting and inspection services performed by a certified Pest Control Adviser (PCA) at the UNICOR Lompoc Farm in California. The scope of work emphasizes an Integrated Pest Management approach and requires the contractor to respond to urgent treatment needs within 48 hours of notification. The contract is structured as a firm-fixed-price agreement with economic price adjustments, featuring a one-year base period and four one-year option periods, with a guaranteed minimum value of 10,000 dollars. Award decisions will be based on the most advantageous offer, prioritizing delivery capability and schedule compliance, geographic proximity to Lompoc, and technical capability over price. Contractors must maintain all required federal, state, and local licenses and provide monthly documentation of inspections and recommendations. Key administrative requirements include the submission of invoices via email using AIA Form G-702 and maintaining active registration in the System for Award Management (SAM). Proposals are due by November 17, 2026, and must be submitted to the contracting officer, Chad Privett. Order limitations are set at a minimum of one item per delivery order, with a maximum of 75,000 dollars for single items and 150,000 dollars for combined items.

Pesticide and Other Agricultural Chemical Manufacturing

POSTED

DEADLINE

ComponentsThe Components contract is a forecast opportunity issued by Federal Prison Industries under the Department of Justice. This procurement is designated as a Small Business Total Set-aside and falls under NAICS code 337211. Interested parties can coordinate with Stacey Phipps or Small Business Specialist Robert L. Connolly for further information. Additional details regarding this opportunity are available through the Department of Justice forecast contracting portal.

Wood Office Furniture Manufacturing

POSTED

DEADLINE

Wood PanelsThis forecast issued by Federal Prison Industries under the Department of Justice concerns the procurement of wood panels. The project is categorized under NAICS code 321211 and is designated as a full and open unrestricted competition. The performance of the contract is slated for Forrest City, Arkansas, with Birchland Plywood identified as the incumbent contractor. The opportunity was posted on October 25, 2026, and lists Stacey Phipps as the primary point of contact. Robert L. Connolly serves as the Small Business Specialist for this requirement. Interested parties can find further details through the Department of Justice contracting opportunities forecast portal.

Hardwood Veneer and Plywood Manufacturing

POSTED

DEADLINE

HARDWAREThis forecast opportunity for hardware is issued by Federal Prison Industries under the Department of Justice. The contract is designated as a Small Business Total Set-aside and falls under NAICS code 332510. The place of performance for this requirement is located in Bensenville, Illinois. Robert L. Connolly serves as both the primary point of contact and the Small Business Specialist for this action. Liberty Fasteners is listed as the incumbent contractor. Interested parties can find further details through the Department of Justice forecast contracting opportunities portal.

Hardware Manufacturing

POSTED

DEADLINE

HARDWAREThis forecast opportunity for hardware is issued by Federal Prison Industries under the Department of Justice. The contract is designated as a Small Business Total Set-aside under NAICS code 332510, with the place of performance located in Amityville, New York. Robert L. Connolly serves as both the primary point of contact and the Small Business Specialist for this requirement. The incumbent contractor for these services is Esco Fasteners. Interested parties can find further details through the Department of Justice contracting opportunities forecast.

Hardware Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

29--SUPERCHARGER,ENGINE

Solicitation # SPE7L426U0094

DLA Land And Maritime

POSTED

DEADLINE

48--ANEROID CAPSULE,VAL

Solicitation # SPE7M426T2629

DLA Land And Maritime

POSTED

CLOSED

48--VALVE ASSEMBLY,MANI

Solicitation # SPE7MC25T274P

DLA Land And Maritime

POSTED

DEADLINE

29--SWITCH,LIQUID LEVEL

Solicitation # SPE7LX26U1195

DLA Land And Maritime

POSTED

CLOSED

53--HARDWARE KIT,SWAGIN

Solicitation # SPE7LX26U1225

DLA Land And Maritime

POSTED

CLOSED

29--FILTER ELEMENT,FLUI

Solicitation # SPE7L526T0980

DLA Land And Maritime

POSTED

CLOSED

Solicitation # SPE7L126T4332

DLA Land And Maritime

POSTED

CLOSED

29--PUMP,FUEL,CAM ACTUA

Solicitation # SPE7L126U0026

DLA Land And Maritime

POSTED

DEADLINE

48--ANEROID CAPSULE,VAL

Solicitation # SPE7M426T2540

DLA Land And Maritime

POSTED

CLOSED

29--FILTER,FLUID

Solicitation # SPE7M426T1451

DLA Land And Maritime

POSTED

DEADLINE

48--DISK ASSEMBLY,VALVE

Solicitation # SPE7MC26Q0044

DLA Land And Maritime

POSTED

CLOSED

29--PARTS KIT,FUEL INJE

Solicitation # SPE7L126T4018

DLA Land And Maritime

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS