51--GUN CLEANING SUPPLIES

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 20097827 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 332216 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-03-09 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Edinburg, TX 78542 The DHS Customs and Border Protection (CBP) requires the following items, Brand Name or Equal, to the following: LI 001: P/N: TOOL0902, AR15/M16 FRONT SIGHT TOOL, 20, EA; LI 002: P/N: 4984-3PK-OR, SAFETY CHAMB FLAG, ORA, 30, EA; LI 003: P/N: A818, .40 S&W SNAP CAPS (5 PAK), 40, EA; LI 004: P/N: A811, .223 CAL SNAP CAPS (2 PAK), 80, EA; LI 005: P/N: A801, 12 GAUGE SNAP CAPS (2 PAK), 80, EA; LI 006: P/N: IP-341-100, .40 S&W BORE BRUSH (100, 4, EA; LI 007: P/N: IP-325X-100, .223 CAL BORE BRUSH, 4, EA; LI 008: P/N: IP-512-50, 12 GAUGE BORE BRUSH (50), 4, EA; LI 009: P/N: P-PHB, LOOP PATCH HOLDER JAGS, 40, EA; LI 010: P/N: CATM4, AR15/M15 CAT TOOL, 20, EA; LI 011: P/N: FG-316-3, ALL PURPOSE BRUSH PACK, 125, EA; LI 012: P/N: 60077, ULTRA THIN GUN LUBRICANT, 30, EA; LI 013: P/N: F414659, AR15 A2 FRONT SIGHT TOOL, 20, EA; LI 014: P/N: IP-338-100, .38 CAL BORE BRUSH (100, 4, EA; LI 015: P/N: 084-411-138WB, 9MM STAIN STL BORE B, 8, EA; LI 016: P/N: IP-367-GV, M16 CHAMBER BRUSH, 80, EA; LI 017: P/N: 24003, BORESNAKE CLEANER, .40 CAL, 100, EA; LI 018: P/N: 24011, BORESNAKE CLEANER M16 .22 CA, 100, EA; LI 019: P/N: 24035, BORESNAKE CLEANER, 12 GA, 100, EA; LI 020: P/N: 3000354, CLEAR LENS SAFETY EYEWEAR, 240, EA; LI 021: P/N: H10A, OUTER EAR HEARING PROTECTION, 240, EA; LI 022: P/N: 033552-000037, MAX-1 INNER EAR PLUG, 40, EA; LI 023: P/N: 156559, DELTA SERIES AR-15 ARMORER, 16, EA; LI 024: P/N: IP-246 B, BONE TOOL 5.56MM, 20, EA; LI 025: P/N: FG919-1M, 3" ALL CAL CLEANING PATCH, 33, EA; LI 026: P/N: 24002, BORESNAKE CLEANER 9MM, 100, EA; LI 027: P/N: FG-RC-338, RIPCORD .38 CAL/9MM, 200, EA; LI 028: P/N: FG-RC-341, RIPCORD .40 CAL, 200, EA; LI 029: P/N: FG-RC-325, RIPCORD .22CAL/223 CAL, 200, EA; LI 030: P/N: FG-RC-512, RIPCORD 12 GA, 120, EA; LI 031: P/N: 080-000-665WB, BASIC FIELD TOOL KIT, 16, EA; LI 032: P/N: OP107, CLEANING ROD 22-45 CAL, 20, EA; LI 033: P/N: OP108, CLEANING ROD 12 GA, 10, EA; LI 034: P/N: HTOOL5, H&K USP/P2000 SIGHT TOOL, 10, EA; LI 035: P/N: 60109, SOLVENT CARBON KILLER 32 OZ, 20, EA; LI 036: P/N: 60215, GUN CLEANER/DEGREASSER, GAL, 10, EA; LI 037: P/N: 33344, GUN SCRUBBER FIREARM CLEANER, 100, EA; LI 038: P/N: 083-135-016WB, SHOTGUN WAD SOLVENT, 10, EA; LI 039: P/N: 3000356, SMOKE LENS SAFETY EYEWEAR, 240, EA; LI 040: P/N: F115A, FIRST AID TRAUMA KIT, MFR: Practical Trauma. (Designed at the request of the US Border Patrol to meet the requirements set forth in the CBP Use of Force Policy, 2010), 11, EA; LI 041: P/N: 30-0001, COMBAT APP TOURNIQUET, BLK, 33, EA; LI 042: P/N: KIM75130, SCOTT SHOP TOWELS, (55 Sheets per roll; 30 rolls per Carton) 50 CARTONS OF 30-ROLLS, 50, EA; LI 043: P/N: P35, PLIER STAPLER HEAVY DUTY, 100, EA; LI 044: P/N: 354, P35 PLIER STAPLES (1/4"), 200, EA; LI 045: P/N: 150149, 2' X 3' NYLON RED FLAG, 50, EA; LI 046: P/N: Z512, ROLL UP SHOOTING MAT COYOTE, 40, EA; LI 047: P/N: 885-861-500WB, COTTON TIPPED APPLIC, 60, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DHS Customs and Border Protection (CBP) intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DHS Customs and Border Protection (CBP) is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (+1 (555) 000-0000) or via email at contact@example.gov. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (+1 (555) 000-0000) or contact@example.gov of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Unless the Buyer indicates otherwise within a particular line item description, each Seller shall include in its online Bid individual pricing for all required line items in order to be considered for award (i.e., Do not use the “Included in another line item” function when pricing each line item). If a line item cannot be separately priced, you must notify the buyer through the FedBid ‘Submit a Question’ feature regarding which line item(s) should be included in which other line item(s) and request reposting. Failure to comply with this term may result in the Bid being determined to be non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. No partial shipments are permitted unless specifically authorized at the time of award. Delivery must be made within 30 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer. Unless otherwise noted. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far. Q&A -Please submit all questions by using the 'Submit a Question' button. This buy will then be reposted with Q&A based on the questions that come in (if applicable). Award Criteria-An award will be made to a responsive offeror (who submits all required submissions on time), whose past performance does not pose a risk to the Government, and whose offer is the Lowest Price Technically Acceptable (LPTA). An offer is technically acceptable if its technical capabilities conform to the Government's Statement of Work or listed specs whichever is applicable to the buy. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to contact@example.gov. For all buys other than Exact Match Sellers MUST document what they are bidding for evaluation for award. Sellers must include, extended specs and/or manufacturer name and part numbers (if applicable). Failure to do this may be cause for termination. This information is REQUIRED in order for a sellers bid to be deemed 'responsive' and to be considered for award. FAR 52.211-6. In accordance with the IPP clause; ELECTRONIC INVOICING AND PAYMENT REQUIREMENTS - INVOICE PROCESSING PLATFORM (IPP) (JAN 2016), payment requests for all new awards must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP). The Contractor must use IPP for contracts and orders awarded April 11, 2016 or later. To constitute a proper invoice, the payment request must comply with the requirements identified in FAR 32.905(b), "Payment documentation and process" and the applicable Prompt Payment clause included in this contract. The IPP website address is: https:// www.ipp.gov. Contractor assistance with IPP enrollment can be obtained by contacting contact@example.gov or phone +1 (555) 000-0000. If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the contracting officer. Bidders must be manufacturers or authorized dealers/distributors of the items being offered in their bid. Bidders may be asked to provide proof.