Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

51--TORQUE PACK ASSEMBL

Active
N0038326QPC43Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia plans to procure twenty-five torque pack assemblies under NSN 1R-5120-011350846-RH, with part number PD602, on a sole source basis from POWER-DYNE LLC, the original equipment manufacturer and the only known source capable of providing repair support for this item. No technical drawings or data are available to the Government, and it does not hold the rights to reproduce or source this component from any other supplier. While the procurement is initially structured as non-competitive, all responsible sources may submit capability statements or quotations for consideration, but any firm not already approved must submit a Source Approval Request, which will not delay the procurement timeline. The North American Industry Classification System code is 332216, the Product Service Code is 5120, and UID requirements and Buy American clauses will apply. The Government is not using FAR Part 12 commercial item procedures but invites interested parties to propose commercial alternatives within fifteen days of notice. The solicitation will be issued electronically through NECO on or about 24 August 2026, with responses due by 29 September 2026, and an anticipated award date of 30 October 2026. All communications must be submitted via email to Jason Sklencar, and no telephone inquiries or hard copies will be accepted.

General Info

U.S. Navy to sole-source 25 torque assemblies from POWER-DYNE LLC via NECO, with Buy American and UID requirements.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

332216 - Saw Blade and Handtool ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA

Full Description

Show more
NSN 1R-5120-011350846-RH, REF NR PD602, QTY 25 EA, DELIVERY FOB ORIGIN. NAVSUP Weapon Systems Support (NAVSUP WSS) Philadelphia intends to solicit on a sole source basis with POWER-DYNE LLC (023T5) for the purchase of a supply. Twenty-five (25) Purchase of NSN: 1RW 5120 011350846 RH, P/N: PD602, TORQUE PACK ASSEMBL. There are no drawings/data available. This source is the Original Equipment Manufacturer (OEM) and the only known source for providing repair support of the above part. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Source Approval Statement applies to this NSN. The approved sources for this material are listed above and it is expected that award will be made to this firm. Any firm which is not already approved to manufacture this material must submit a Source Approval Request, SAR. This procurement will not be delayed to wait for a SAR approval. NAICS CODE: 332216 PSC: 5120 UID: UID requirements will apply. Buy American Clauses will apply and will be posted in the solicitation. The Government intends to acquire these supplies using the provisions, clauses and procedures prescribed in FAR Part 15. Based upon market research, the Government is NOT using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item WITHIN 15 days of this notice. This notice of intent is not a request for competitive proposals. However, all proposals received within 30 days after date of publication of this synopsis will be considered by the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. This procurement is not a Total Small Business Set-Aside. Electronic procedures will be used for this solicitation. RFP/Solicitation will be posted to NECO. The approximate issue date for the Solicitation/RFP will be 24 August 2026 with an approximate response/closing date of 29 September 2026. No telephone requests will be honored and no hard copies will be mailed out. Anticipated award date is 30 October 2026. Interested organizations may submit their capabilities and qualifications to perform the effort by email Jason Sklencar, Jason.sklencar@navy.mil/

Similar Contracts

Same NAICS industry code

NAICS: 332216
New
Federal
H53K HMH462/Japan/Option Snap On Tooling
Solicitation # N6833526RFI0526
This request for information is issued by the Naval Air Warfare Center Aircraft Division under solicitation number N6833526RFI0526 to gather market insights for a potential future procurement of standardized maintenance tool kits. The requirement involves 26 distinct tool groupings, including pliers, wrenches, sockets, hammers, and screwdrivers, all configured into kits based on IDSC Holdings LLC/Snap-on industrial products. A base requirement calls for 206 kits to be delivered across two operational sites, with an optional add-on of 103 additional kits for a potential third site. The NAICS code for this effort is 332216, with a small business size standard of 750 employees, and respondents are asked to disclose their small business status and whether they qualify under categories such as 8(a), SDB, HUBZone, or veteran-owned. Respondents must indicate the percentage of work they would perform in-house and demonstrate compliance with the 50 percent performance requirement under the Defense Authorization Act of 2013, along with confirmation of adequate financial and operational capacity to fulfill the requirement. Responses must be submitted in writing within five days of the RFI release, limited to ten pages, and sent via email to the designated point of contact. All submissions are voluntary and at the respondent’s expense; the government will not reimburse any costs or compensate for time or resources invested. While no contract or purchase obligation is implied, respondents may include price data in a separately labeled document marked PRICE DATA, although this does not constitute an offer. Proprietary information must be clearly identified to receive safeguarding under federal regulations, though the government assumes no liability for unmarked sensitive data. Product specifications, distributor details, and certification proofs may be included without counting toward the page limit. The RFI explicitly states that failure to respond does not bar future participation, and any eventual solicitation will be posted on beta.SAM.gov, making it the respondent’s responsibility to monitor for follow-on opportunities. All information will be handled according to FAR 15.207 and is not binding on the government in any way.
Navair Warfare Ctr Aircraft Division

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332216
New
SLED
Electrician, Machinist, Sheet Metal Worker, and Carman Tool Sets – Rebid
Solicitation # 194886A
Metra is soliciting bids for standardized tool sets for Electricians, Machinists, Sheet Metal Workers, and Carmen through Invitation for Bid No. 194886A, with responses due by August 26, 2026, prior to 2:00 p.m. LPT, submitted exclusively via its procurement portal. The solicitation includes four distinct toolset groups—Carman, Electrician, Sheet Metal, and Machinist—with required quantities of 100, 75, 75, and 90 units respectively, for a total estimated contract value of $1,050,000 over a two-year period. All tools and accompanying 30-inch red steel mechanics carts with five drawers, 5-inch casters, ball-bearing slides, locking lids, dual gas struts, and non-slip liners must be manufactured in the United States, comply with ASME B107 standards, carry a minimum one-year manufacturer warranty, and be laser-etched with unique serialized identification numbers. Only approved brands—Snap-on, Matco, Proto, Wera, MAC Tools, Williams, BAHCO, Eklind, Johnson Level & Tool, and Klein Tools—are permitted; substitutions or equivalents are not accepted, and sourcing from Hand Tool Institute members is preferred. Each tool cart must be fully assembled and all tools kitted within the cart prior to delivery. Bids must be submitted on a group-by-group basis, and bidders must include all items within a group to be considered responsive. The award is based solely on the lowest responsive and responsible bid, with no consideration given to early payment discounts. All deliveries are F.O.B. Destination within the Chicagoland Six County Area, and transportation, packing, and crating costs are included in the bid price. Bidders must execute and submit multiple certifications including non-collusion, debarment and suspension, price integrity, corrupt practices compliance, and lobbying restrictions, particularly if the bid exceeds $100,000. Subcontractors involved in contracts over $25,000 must also provide debarment and suspension certifications. The vendor warrants that all goods meet federal, state, and local safety regulations including OSHA requirements, and Metra retains the right to reject nonconforming or defective items at the vendor’s expense. Invoices must be itemized and sent to Metra’s Accounts Payable Department via mail or email, subject to Net 3
Metra

POSTED

about 23 hours ago

DEADLINE

in 20 days
View Details
NAICS: 332216
New
DIBBS
CUTTER, MILLING, END
Solicitation # SPE8E5-26-T-3870
The contract specifies the procurement of a single-end, long-length, four-flute milling cutter with a right-hand helix and weldon shank, measuring 0.250 inches in cutter diameter and 0.375 inches in shank diameter, with a cutting length of 1.250 inches and an overall length of 3.062 inches. The tool must comply with ASME B94.19-1997 Table 38, referencing Revision NR dated 01/01/1997, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Packaging must adhere to ASTM D3951 as modified by DLA packaging requirements, with all items marked and labeled per MIL-STD-129, palletized according to RP001, and shipped in compliance with DLA procedural notes C19 and C20 for transportation. The item, identified by NSN 3455-00-250-0772 and purchase request 7017757344, is ordered in a fixed quantity of 162 units at $162.00 each, totaling $26,244.00, with no variance permitted in quantity. Delivery is FOB origin, inspection and acceptance occur at destination, and the required delivery date is February 1, 2027, with an original deadline of January 21, 2027, under a 167-day delivery window. The contract is issued under solicitation SPE8E5-26-T-3870, with the designated delivery point being the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002. The contract was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332216, and all documentation and compliance directives take precedence over general commercial standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING IRON, ELEC
Solicitation # SPE8E9-26-T-3314
The contract is for the procurement of 46 electric soldering irons with a part number of 3439-00-965-0090, specified as 200 watts with shape B tips, requiring two tips per unit. The item is not classified as hazardous and does not require a Safety Data Sheet, though the hazardous item indicator must remain unchanged. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents authorized by NAVSEA. Any portable devices containing mercury must be shock-proof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging, identification, and marking of non-accepted supplies must comply with DLA standards including removal of government identification and physical marking requirements. The solicitation number is SPE8E9-26-T-3314, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332216 for federal procurement administered by the Department of Defense’s Construction & Equipment MRO Service I. Deliveries are due within 167 days of award, and the place of performance is New Cumberland, PA, with Matthew Kruc listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING STATION
Solicitation # SPE8E6-26-T-4037
The contract is for the procurement of 30 soldering stations with NSN 3439-01-576-6864 and part number 8007-0528, issued by DLA District San Joaquin under solicitation SPE8E6-26-T-4037. Each unit must feature an analog dial control with Celsius/Fahrenheit display and temperature lockout functionality, and must comply with DLA packaging requirements and MIL-STD-2073-1E for preparation and packaging. The items must be shipped FOB origin with delivery due in 61 days, and inspection and acceptance occur at the destination. Packaging must adhere to MIL-STD-129 for marking, with no special marking required, and palletization must follow DLA guidelines. The contract prohibits intentional addition of mercury or mercury-containing compounds to the equipment except for specific exemptions such as batteries, fluorescent lights, sensors, or instruments as defined by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The delivery address is W62G2T, W1A8 DLA DIST SAN JOAQUIN, Tracy, CA 95304-5000, with the original required delivery date set for November 18, 2026, and a need ship date of April 8, 2026. The unit price is $30.00, totaling $900.00 for the order, with zero variance allowed in quantity. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue date or award date. The contract also references hazardous materials packaging rules and transportation procedures outlined in DLAD Proc Notes C19 and C20.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 332994
New
Federal
58--RECEIVER,COUNTERMEA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPC39
The solicitation requests three units of a receiver component designated NSN 7R-5865-017083360-P8 for repair or modification purposes, with delivery terms set at FOB origin. The item is part of a defense acquisition under the solicitation number N0038326QPC39, issued by the Naval Supply Systems Command Weapon Systems Support. Interested vendors must ensure that their product, offeror, or manufacturer meets all applicable qualification requirements at the time of award, as mandated by FAR clause 52.209-1, and must comply with all specified military and federal standards referenced in the solicitation. Documentation such as technical data packages, specifications, and qualified product lists must be obtained through ASSIST-Online or the DoD Single Stock Point system, with downloadable PDFs available via the Quicksearch portal and alternative ordering methods for non-digital items. The government has determined that commercial item acquisition policies under FAR Part 12 do not apply to this requirement, though suppliers may still propose commercial alternatives within 15 days of the notice if they believe their offering satisfies the government’s needs. Responses are due by September 21, 2026, at 4:00 a.m., and the solicitation was posted on August 6, 2026. All inquiries and qualification-related questions should be directed to the primary point of contact, Shamus F. Roache, at the Philadelphia office of the Department of Defense. The contract will be awarded solely to qualified entities meeting the technical and compliance criteria outlined in the solicitation, with no set-aside designated for small or special categories of businesses.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
New
Federal
15--STRUT,AIRCRAFT
Solicitation # N0038326QFB07
The U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, is soliciting a sole source procurement for one aircraft strut designated as NSN 1R-1560-017137745-LU with part number 06302-10164-043 from Sikorsky Aircraft Corp, the only qualified source due to insufficient or illegible technical data in government possession that would allow for competitive bidding. The contract will be awarded under the existing Basic Ordering Agreement N00383-26-G-P401, with delivery made FOB origin, and the requirement is not subject to any set-aside provisions. The item is subject to Free Trade Agreements and the World Trade Organization Government Procurement Agreement, necessitating Government Source Approval prior to award, which cannot be delayed due to the time required for new source qualification. All proposals must include complete documentation as specified in the NAVSUP WSS Source Approval Brochure, and submissions lacking this information will be disqualified. The solicitation, identified by number N0038326QFB07, was posted on August 6, 2026, with responses due by September 10, 2026. The sole source determination is based on the unique nature of the part and the government’s inability to obtain adequate data for alternative suppliers. Interested parties must contact Taylor O'Connor at the provided email for any inquiries, and all offers must demonstrate compliance with the source approval requirements to be considered for award.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
ELEVATOR ASSEMBLY
Solicitation # N0038326QHA65
This contract pertains to the repair and overhaul of E-2 Elevator Assemblies (Left and Right) under solicitation N0038326QHA65, issued by the Navy’s Supply Command Weapon Systems Support office in Philadelphia, Pennsylvania. The work must be performed in strict accordance with a hardcopy Statement of Work and Contract Data Requirements List dated October 4, 2024, obtained from the N231 Source Development office. The contractor is required to meet a defined Repair Turnaround Time, measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system, with final government inspection and acceptance mandatory within that timeframe. A monthly throughput capacity must be provided and upheld, and all assets must be inducted within 365 days of contract award; any received after this date require formal bilateral agreement for repair authorization. A reconciliation modification will follow final acceptance, adjusting payment based on compliance with the agreed-upon turnaround times, with potential financial considerations for delays. The contract imposes multiple mandatory clauses governing compliance, including strict adherence to Buy American and Free Trade Agreements, limitations on pass-through charges, and security prohibitions as outlined in recent deviations effective through 2026. First Article Inspection is required for the initial repaired unit, with Defense Contract Management Agency and Federal Source Technical personnel present at the contractor’s facility to verify full compliance with repair publications and testing standards. Packaging must conform to MIL-STD-2073, and all contractual documents are deemed issued upon electronic transmission or mailing. Early and incremental deliveries are preferred. The point of contact for the solicitation is Albert J. Russo, with communication directed via official Navy email, and responses must be submitted by September 8, 2026. This procurement is classified under NAICS code 336413 and is open to all compliant offerors without set-aside restrictions.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
LIFT,SCISSOR,VTC
Solicitation # N0038326QPB28
The contract pertains to the procurement of a SCISSOR LIFT, VTC under solicitation N0038326QPB28 issued by the Naval Supply Systems Command Weapon Systems Support, part of the Department of Defense, with the point of contact being Andrew N. Phillips at the Philadelphia, Pennsylvania office. The solicitation was posted on May 4, 2026, with responses due by May 7, 2026, and falls under NAICS code 336413 for motor vehicle parts manufacturing. Early and incremental deliveries are encouraged. The contract includes mandatory compliance with the Navy’s use of Workflow Pro Assist Module, wide-area workflow payment instructions requiring invoice and receiving report combos, and the use of standardized Navy quality and inspection clauses. Inspection and acceptance procedures are explicitly defined with significant emphasis on compliance. The warranty for non-complex supplies provides a twelve-month coverage period and a sixty-day window after defect discovery for corrective action. Buy American and Free Trade Agreements requirements are enforced, including associated certification obligations, alongside security exclusions and equal opportunity provisions targeting workers with disabilities. The contract also incorporates mandatory national defense priority ratings and applies all relevant contractual documents related to this procurement. The offeror must provide royalty information and adhere to the Alternate A annual representations and certifications as required by current deviations.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332710
New
Federal
TEST SET,INDICATOR
Solicitation # N0038326QPC41
The contract pertains to the provision of a TEST SET, INDICATOR under solicitation N0038326QPC41, issued by the Naval Supply Systems Command Weapon Systems Support within the Department of Defense. The solicitation was posted on August 6, 2026, with a response deadline of September 8, 2026, and is classified under NAICS code 332710. The primary point of contact is Jason J. Sklencar, reachable via email at jason.j.sklencar.civ@us.navy.mil, with a telephone number listed as 215-697-4179, and the office is located in Philadelphia, Pennsylvania. The contract imposes mandatory requirements including the use of Workflow Pro (WFP) Mod Assist Module and adherence to the Navy’s use of AbilityOne supported contractors, which includes the release of offeror information. Inspection and acceptance of supplies are governed by strict protocols, and a twelve-month warranty with a sixty-day discovery window applies for noncomplex supplies. Compliance with federal acquisition regulations is central, particularly regarding the Buy American Act, Free Trade Agreements, and Balance of Payments Program, which require certifications and adherence to domestic sourcing standards. Security prohibitions and exclusions under a 2026 deviation, along with equal opportunity provisions for workers with disabilities, are enforced. The contract mandates the use of the Invoice and Receiving Report Combo through Wide Area Workflow for payment, with payment instructions to be completed prior to submission. A notice of priority rating for national defense and emergency preparedness is also applicable, ensuring the product meets urgent defense needs. Additionally, annual representations and certifications must be maintained under a 2026 deviation, and royalty obligations are addressed per existing provisions dating to 1984. All supply deliveries must be made in accordance with the Navy’s defined inspection, acceptance, and valuation standards as outlined in the applicable contract clauses.
Machine Shops

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--AMPLIFIER,AUDIO FRE, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBA46
The U.S. government, through NAVSUP Weapon Systems Support, intends to procure six units of NSN 1680-015532261, an audio frequency amplifier, under a sole source procurement authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302. The item is designated for repair or modification and is exclusively sourced from SCI TECHNOLOGY INC, the Original Equipment Manufacturer, as the government does not own the proprietary data or rights necessary to obtain the item from any other vendor. Delivery will be FOB origin, and no drawings or technical data are available to support alternative sources. While the procurement is restricted to this single approved source, other firms may submit capability statements or proposals within 30 days of the notice for consideration, though no delay in the process will be made to accommodate new source approvals. The solicitation will be issued electronically via NECO, with no hard copies or telephone requests accepted, and responses must be submitted to the designated POC at brian.c.furness.civ@us.navy.mil. The acquisition is being conducted under FAR Part 13 streamlined procedures and does not fall under the commercial item acquisition policies of FAR Part 12. Although the effort is not a Small Business Set-Aside, responsible sources may still express interest in providing the item as a commercial offering within 15 days of the notice. The NAICS code for this procurement is 336413, with the Federal Supply Class 1680, and the request for quotation will be issued under solicitation number N0038326QBA46 with a response deadline of September 8, 2026. The contracting office is located in Philadelphia, Pennsylvania, and all communications must be directed to the designated point of contact. The government retains the right to proceed with award to the sole approved source even if additional proposals are received, as no alternative supply is deemed capable of meeting the agency’s requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
59--AMPLIFIER,RADIO FRE, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBA43
The U.S. Government, through NAVSUP Weapon Systems Support, is pursuing a sole source procurement for the repair of one unit of NSN 5996-015376920, an amplifier for radio frequency applications, with SCI TECHNOLOGY INC as the only known and authorized source. The item is identified by NSN 7R-5996-015376920-V2 and TDP VER 002 with reference number 5442600-001, and delivery will be FOB origin. The Government does not own the technical data or intellectual property rights necessary to source this item from any other manufacturer, and SCI TECHNOLOGY INC is confirmed as the Original Equipment Manufacturer with exclusive authorization under 10 U.S.C. 2304(c)(1) and FAR 6.302. All other potential suppliers must submit a Source Approval Request to qualify, but the procurement will proceed without delay pending such submissions. The acquisition is being conducted under FAR Part 13, not FAR Part 12, meaning it is not treated as a commercial item acquisition, and market research confirms no commercially available alternatives meet the Government’s requirements. The solicitation will be issued electronically via NECO with no hard copies or telephone requests accepted, and all proposals must be submitted by email to Brian C. Furness at brian.c.furness.civ@us.navy.mil. The response deadline is September 8, 2026, with the opportunity for any interested party to demonstrate capability to provide a commercial item within 15 days of the notice, though no such alternatives are currently anticipated. The NAICS code is 336413 and the FSC is 1650. This procurement is not a Small Business Set-Aside and is not intended for competitive bidding; however, any proposals received within 30 days will be evaluated solely to determine whether competition is feasible. The contract award is expected to be made exclusively to SCI TECHNOLOGY INC given its unique status as the sole capable provider with authorized technical data and manufacturing rights.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details