Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

BOLT, SHOULDER

Active
SPE4A7-27-T-1464Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A7-27-T-1464 is issued by the Defense Logistics Agency (DLA) Weapons Support ASC Supplier Operator and AF Div for the procurement of 1,149 shoulder bolts, identified by NSN 5306-01-205-4337. The contract requires delivery within 185 days after the award date, with a need ship date of April 27, 2027, and a final required delivery date of October 31, 2027. Shipping is established as FOB Origin, with the delivery location specified as DLA Distribution San Joaquin in Tracy, California. The procurement is subject to strict technical and quality requirements as defined in the DLA Master List, including specific packaging standards per MIL-STD-2073-18E and marking requirements per MIL-STD-129. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Compliance with the Buy American Act, the Berry Amendment, and DFARS 252.225-7036 is mandatory. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and destination inspection as per FAR 52.246-2. Offerors must be registered in SAM.gov and are encouraged to submit quantity ranges when quoting via the DIBBS portal.

General Info

DLA solicitation for 1,149 shoulder bolts to be delivered to Tracy, California.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

1

RFQ SPE4A7-27-T-1464

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV
Office AddressUSA
Contacts
Naron Sanderlin
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,SHOULDER
BOLT, SHOULDER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5306-01-205-4337 Quantity: 1,149 EA Purchase Request: 7018665262QTY: 1149 Delivery: 185 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
Federal
VACCO NSNs-Sole Source
Solicitation # CM26265595
DLA Land And Maritime

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
Federal
NUT,PLAIN,HEXAGON
Solicitation # N0010426QFF19
This contract pertains to the procurement of hexagon nuts designated as SPECIAL EMPHASIS Level I material for use in critical shipboard systems, where failure could lead to catastrophic outcomes including loss of life or vessel. The nuts must conform to York drawing 366-59531 and be manufactured from QQ-N-286 material in annealed and age-hardened condition, with stringent requirements for traceability, chemical and mechanical testing, and nondestructive inspection. Each shipment must include an additional fastener per heat/lot with full traceability, and all materials must be marked permanently using approved methods per MIL-DTL-1222 and MIL-STD-792, ensuring identification of manufacturer, material symbol, and unique heat-lot traceability. All certification data must be submitted via WAWF to Portsmouth Naval Shipyard (N50286) prior to shipment, approved by N39040, and accompanied by electronic notification to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL, with no material allowed to ship without prior acceptance. The contract mandates adherence to ISO-9001 or MIL-I-45208 quality systems, with Government Quality Assurance at source, including inspections by DCMA and review of all test reports, which must be positive, unqualified, and directly tied to traceable marking on the material. Testing must be performed by approved labs for critical procedures like Slow Strain Rate Tensile Tests, and chemical and mechanical certifications must reflect actual properties post-fabrication, prohibiting transcription or ambiguous language. Internal threads must be cut, not cold-formed; threads must be inspected per FED-STD-H28, with System 21 as minimum unless otherwise specified. Mercury is strictly prohibited, and all packaging and handling must follow MIL-STD-2073. Delivery is capped at 365 days post-effective date, early delivery is permitted without cost, and the order is classified as DX/DO rated under DPAS for national defense priority. All subcontracting, waivers, and deviations require formal approval, and failure to comply with any requirement—including missing, incomplete, or improperly formatted certifications—will result in rejection of materials.
Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
Federal
BOLT,MACHINE
Solicitation # N0010426QFB96
This contract pertains to the procurement of a machine bolt, designated as a critical shipboard component classified under Special Emphasis material (Level I/SUBSAFE), requiring stringent quality and traceability controls to ensure safety and reliability. The bolt must conform to specific standards, including Parker drawing 600-992-688 and MIL-DTL-1222 for self-locking elements, with cadmium plating meeting QQ-P-416 requirements. Contractors are responsible for providing full traceability from raw material to finished product, including certifications for chemical and mechanical properties, non-destructive inspections, and hydrogen embrittlement relief treatments. A certificate of compliance must be submitted for each shipment, confirming adherence to all contractual and specification requirements. The contract enforces a rigorous inspection regime before Government acceptance, including sampling plans with zero defect tolerance and full documentation of all testing and quality assurance measures. Furthermore, the contract mandates compliance with ISO 9001 quality management systems or equivalent militarily recognized standards and requires Government Quality Assurance audits at the contractor’s facility. All deviations or waivers must be approved by the Contracting Officer and shared with the Government’s quality assurance representative. The bolt must be marked permanently in accordance with specified military standards to maintain complete traceability, and strict procedures are outlined for handling, storage, and inspection, including when Government Furnished Material is involved. Subcontractors are subject to quality oversight and regular audits to ensure product conformity. Delivery includes certification data submission via Wide Area Work Flow for review prior to shipment acceptance, with a maximum delivery schedule of 365 days from the contract effective date. The contract is a rated order under the Defense Priorities and Allocations System (DPAS), emphasizing national defense priority.
Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
Federal
NUT,PLAIN,ROUND
Solicitation # N0010426QFF34
This solicitation is for the procurement of Stem Retaining Nuts manufactured in accordance with NAVSEA drawing 6602371 and MIL-DTL-24252 specifications. Due to their use in crucial shipboard systems, these items are designated as Special Emphasis material, requiring strict quality control, quantitative chemical and mechanical analysis, and a formal certificate of compliance. The contract is a DO-rated order for national defense use, with a proposed final delivery window of 365 days after the effective date of the contract. The contractor must maintain a quality system compliant with ISO-9001 and provide a one-year warranty from the date of delivery. All certification data must be submitted and accepted via Wide Area Workflow (WAWF) prior to shipment. The solicitation is a combined effort for multiple related items, allowing for awards at the CLIN level to multiple vendors. Access to certain technical drawings requires a signed security agreement due to the inclusion of NOFORN and Naval Nuclear Propulsion Information.
Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in 17 days
View Details
NAICS: 332722
New
Federal
MAST BOLTS
Solicitation # N6660426Q0492
The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) is soliciting quotes for the manufacture of MP35N Mast Bolts (Part No G770662-5) and associated material certifications. This unrestricted acquisition is being pursued on a Firm Fixed Price basis, with the government intending to award a single purchase order to the responsible offeror based on the Lowest Price, Technically Acceptable (LPTA) criteria. The requirement is structured with a base year and four option years, with each period requiring a quantity of 50 bolts and 50 material certifications, delivered F.O.B. Destination to Naval Station Newport, Rhode Island. To be deemed technically acceptable, offerors must provide quotes valid for at least 30 days and prove the ability to meet all military specifications and drawing requirements, specifically DWG 7519906. Strict sourcing mandates require items to be new and obtained directly from the Original Equipment Manufacturer (OEM) or authorized channels. Due to the Distribution D and Export Control designation of the drawings, offerors must possess a valid Joint Certification Program (JCP) certification and an approved DD 2345 form. Additionally, contractors must be registered in the System for Award Management (SAM) and maintain an active NIST SP 800-171 assessment and CMMC Level 2 (self) certification uploaded to the Supplier Performance Risk System (SPRS) module of the PIEE website. Offers must be emailed to Jennifer Vatousiou by 11:00 a.m. EST on October 16, 2026. Submissions must include proof of past performance on similar work and data demonstrating that units have passed all required inspections. Payment will be processed via credit card unless a unique item identifier (UID) is required for items costing $5,000 or more, in which case Wide Area Workflow (WAWF) will be used.
Nuwc Division Newport

POSTED

about 5 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
Federal
NUT, HEX, HEAVY
Solicitation # N0010426QFG22
This contract is for the procurement of Heavy Hex Nuts designated as Special Emphasis Level I material, critical to the safe and reliable operation of shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The items must conform to Leslie Controls Drawing 36938N and ASTM-A194 Grade 2H or Grade 7, with stringent requirements for chemical and mechanical certification, traceability, and nondestructive testing using either liquid penetrant or magnetic particle inspection in accordance with T9074-AS-GIB-010/271 and MIL-DTL-1222. Each shipment must include an additional fastener per heat/lot with full traceability, and all materials must be permanently marked with traceability identifiers per MIL-STD-792, including manufacturer and material symbols. Certification reports must be complete, unqualified, and directly linked to the physical part, with transcription explicitly prohibited. The contract mandates adherence to ISO-9001 or an approved alternate quality system, with Government Quality Assurance conducting inspections at the supplier's facility. All certifications and test data must be submitted via WAWF to Portsmouth Naval Shipyard (N50286) and reviewed and accepted prior to shipment, with no material allowed to be shipped without formal acceptance. The contract incorporates stringent controls for configuration management, requiring formal Engineering Change Proposals for any modifications affecting form, fit, function, or interface, and prohibits unauthorized deviations or waivers without prior written approval from the Contracting Officer. Material must be mercury-free, internal threads must be cut and not cold-formed, and packaging requirements exclude specific container types but mandate MIL-STD-129 labeling and thread protectors. The solicitation is issued under Emergency Acquisition Flexibilities and is a DO-rated order under the Defense Priorities and Allocations System, indicating national defense priority. Subcontractors are subject to the same quality requirements as the prime, and the buyer is responsible for ensuring supplier capability through documented evaluation and audit procedures. Delivery must be completed within 365 days of contract effective date, with submission of certification data due no later than 20 days prior to scheduled delivery. Offers must not include quantity discounts across multiple CLINs to avoid unreasonably low award values, and the solicitation may result in multiple awards. The contract also enforces Buy American provisions, small business subcontracting obligations, and strict cybersecurity and data handling protocols under recent defense deviations and prohibitions.
Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in 20 days
View Details
NAICS: 332722
New
DIBBS
53--RETAINER,PACKING
Solicitation # SPE7L1-27-U-0087
Solicitation SPE7L1-27-U-0087 is a total small business set-aside issued by the Defense Logistics Agency (DLA) Weapons Support Land Supply Chain for the procurement of 579 packing retainers (NSN 5330-01-176-0932). This critical application item must be manufactured according to basic drawing 76823 2-43216, revision F. The required delivery timeframe is 48 days after the order date, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including MIL-STD-130N for identification marking and MIL-STD-129 for general marking. Specific packaging requirements dictate that items be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, with palletization following RP001. Additionally, the contractor must comply with export controls for technical data under ITAR or EAR and meet cybersecurity standards, including CMMC Level 2 and DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
Federal
SET SCREW
Solicitation # N0010427QBB20
Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Federal
SCREW,CAP,SOCKET HD
Solicitation # N0010426QFB13
This contract is for the supply of a Screw, Cap, Socket Head, identified by Vacco drawing S1E10064, part number V2C11114-16DZO, intended for use in a critical shipboard system where material failure could result in severe consequences including loss of life or damage to vital shipboard systems. The material specified for this item is SAE-AMS-5643 Condition H1025, and stringent quality assurance and traceability requirements are mandated due to the classification of the material as SPECIAL EMPHASIS (Level I). The contractor must provide full certification including quantitative chemical and mechanical analysis, liquid penetrant inspection, and thread inspections in accordance with specified military and industry standards. Traceability from raw material heat/lot numbers through processing to finished parts must be maintained, with marking requirements to enable identification of material grade and manufacturer. The contract enforces rigorous quality system standards conforming to ISO 9001, MIL-I-45208, and related calibration standards and requires government source inspection and acceptance prior to shipment. Certification data must be submitted electronically via the Wide Area Work Flow system to Portsmouth Naval Shipyard for review and acceptance before any shipments are made. The contract also includes provisions for configuration control, engineering change management, and strict handling of any deviations or waivers, which require review and approval by the contracting officer. Packaging and marking must comply with military standards. Additional clauses prohibit the use or contamination by mercury. Overall, the contract places heavy emphasis on ensuring material integrity, precise documentation, and quality control to meet military specifications for a critical safety item essential for naval applications.
Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
Federal
STUD,CONTINUOUS THR
Solicitation # N0010426QFA72
The contract pertains to the procurement of specialized studs designated as Special Emphasis Level I material, critical for use in shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must conform to QQ-N-286 Class A specifications and be manufactured in strict accordance with William Powell Company Drawing 67153, with all components undergoing rigorous chemical and mechanical testing, including liquid penetrant and ultrasonic inspections, as well as slow strain rate tensile testing performed only by approved laboratories. Traceability is mandatory throughout the entire lifecycle, requiring unique heat-lot markings on each part and comprehensive certification reports that must directly link to the physical item without transcription or disclaimers. All certifications, including those for tensile, yield, elongation, and hardness properties, must be 100% verified and submitted via Wide Area Work Flow to Portsmouth Naval Shipyard for review and acceptance prior to any shipment, with no material allowed to ship without explicit acceptance. The contractor must maintain a certified quality system compliant with ISO-9001 and ISO-10012 or as an alternative MIL-I-45208 and MIL-STD-45662, subject to government audit at any time. All subcontractors must be vetted and monitored to ensure adherence to contract requirements, with traceability maintained even during outsourced operations. Final inspection requires zero defect tolerance with 100% verification of all certifications, material markings, and nondestructive test reports. Fasteners must be permanently marked with material symbol, manufacturer ID, and traceability code prior to coating, following MIL-DTL-1222 standards. The contract enforces Buy American provisions, a DX priority rating under DPAS, and prohibits mercury or mercury compounds. Deliveries are limited to a 365-day window with incremental shipments permitted at no extra cost, and any design changes necessitate an Engineering Change Proposal approved by the Government. Past performance will be evaluated in award decisions, and all documentation must be submitted electronically through ECDS and WAWF systems with the designated point of contact being Lydia M. Shaloka.
Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
Supply of Socket Head Cap Screws (NSN 5305016688614)This subcontract involves the manufacture or procurement of 2,000 socket head cap screws to support prime contractors delivering for the DLA Weapons Support ASC Commodities Division. The items must strictly adhere to NSN 5305016688614 and RA001 technical specifications. All deliverables must comply with the Buy American Act and meet quality standards established by MIL-STD-1916 and ASQ H1331. Logistical requirements mandate that packaging, marking, and identification follow MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N respectively. The final shipment of 2,000 units is to be delivered to the BT Collins USARC facility located in Sacramento, California.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Key Washers (NSN 5310-00-151-8784)This subcontract involves the precision manufacturing and supply of 10 Key Washers under NSN 5310-00-151-8784 for the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for fabricating the units to exact military specifications and ensuring strict quality assurance through sampling and inspection per MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformance. The project is governed by several critical regulatory standards, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012. Performance for this contract will take place in Cherry Point, North Carolina, under NAICS code 332722.
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 335312
New
DIBBS
61--DISTRIBUTION BOX
Solicitation # SPE4A7-27-T-1477
Solicitation SPE4A7-27-T-1477 is a fixed-price request for the procurement of one distribution box, identified by NSN 6110-01-674-3749 and RTX Corporation part number 104024-0A. The requirement is issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for delivery to the Fleet Readiness Center East in Cherry Point, North Carolina. The delivery timeline is specified as five days after receipt of order, with an original required delivery date of October 9, 2026. Shipping is designated as FOB Origin, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, with packaging and marking governed by MIL-STD-2073-1E and MIL-STD-129. Palletization must follow RP001 standards. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and submission of all quotes via the DLA Internet Bid Board System. The procurement is subject to the Buy American Act, the Berry Amendment, and specific cybersecurity standards under DFARS 252.204-7012. This acquisition is categorized under NAICS code 335312 and may be eligible for automated award.
Motor and Generator Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493110
New
DIBBS
MIL-SPEC Packaging and Fulfillment ServicesThis subcontract for MIL-SPEC Packaging and Fulfillment Services supports the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project requires specialized military packaging, marking, and cushioning for prime contractors, with strict adherence to MIL-STD-2073-1 Appendix D and MIL-STD-129 for bar-coding and marking. The scope of work involves using military-grade labeling equipment and MIL-SPEC cushioning to produce 354 individually packaged kits, each including a detailed contents list, prepared for FOB Origin shipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 493110, with performance taking place in New Cumberland, Pennsylvania. Interested parties must respond by October 23, 2026.
General Warehousing and Storage

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423610
New
DIBBS
Supplier of Radio Frequency Cable Splicing KitsThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, requires the procurement of 354 Radio Frequency Cable Splicing Kits. The specific requirement is for part number 10-06950 from manufacturer Infinite Electronics International, Inc., corresponding to NSN 5975-01-611-7015. All units must be delivered to DLA Distribution DDSP in New Cumberland, Pennsylvania. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423610. Awardees must ensure strict compliance with the Buy American and Balance of Payments Program, as well as DFARS prohibitions regarding covered defense telecommunications equipment. The response deadline for this solicitation is October 23, 2026.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized packaging and shipping services, specifically requiring components to be packaged according to ASTM D3951 and marked and labeled in compliance with MIL-STD-129 and RP001 DLA Packaging Requirements. The contractor will utilize industrial palletization and MIL-SPEC crating to deliver packaged assemblies FOB Origin to DLA Distribution Cherry Point. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488510 for the Department of Defense. Performance will take place in Cherry Point, North Carolina. Interested parties must respond by October 23, 2026.
Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331210
New
DIBBS
Supply of Berry Amendment Compliant Aerospace MaterialsThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves the supply of raw aerospace-grade metals and alloys for prime contractors. The scope of work requires the delivery of certified raw materials to a fabrication facility located in Cherry Point. To ensure strict adherence to federal regulations, all sourced materials must be fully compliant with the Berry Amendment and the Buy American Act, supported by comprehensive material certifications and Mill Test Reports to verify both origin and grade. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210. Interested parties must adhere to the timeline established by the posting date of October 15, 2026, with a response deadline set for October 23, 2026.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
First Article and Production Lot Testing ServicesThis subcontract opportunity is for the provision of First Article Testing and Production Lot Testing services to support prime contractors on DLA Weapons Support ASC projects. The selected provider will be responsible for conducting both destructive and non-destructive validation and verification testing within accredited laboratory facilities. Key requirements include the preparation of reports according to DI-NDTI-80809B and close coordination with DCMA QAR for witnessed testing events. Final deliverables consist of FAT and PLT reports, along with DD Form 1222 and DD Form 250. The project is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance located in Cherry Point. This is a total small business set-aside under NAICS code 541380. Interested parties must respond by October 23, 2026.
Testing Laboratories and Services

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Precision Machining and Fabrication of Pylon Support AssembliesThis subcontract involves the precision machining and fabrication of 48 Pylon Support Assemblies for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The scope of work requires CNC machining, milling, and turning of aerospace-grade materials in strict accordance with the provided Technical Data Package. All raw material sourcing must comply with the Buy American Act and the Berry Amendment to ensure regulatory adherence. The project is designated as a Total Small Business Set-Aside under NAICS code 336413, with performance taking place in Cherry Point. To be eligible, the contractor must maintain ISO 9001:2015 and CMMC Level 2 certifications. The procurement process began on October 15, 2026, with a response deadline set for October 23, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
Supply of Data Entry Joysticks (NSN 5895-01-568-1533)This subcontract involves the supply of 18 data entry joysticks, specifically HurleyIR part number RP-M1-DACP, to support prime contractors delivering for the DLA Weapons Support ASC. The contractor is responsible for manufacturing or sourcing the units and ensuring strict adherence to quality assurance sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, all items must be marked according to RQ017 and packaged in compliance with ASTM D3951 and MIL-STD-129. The agreement requires full compliance with DLA RA001 and RC001 requirements. The project falls under NAICS code 334290 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is centered in New Cumberland, Pennsylvania.
Other Communications Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331110
New
DIBBS
Supply of Berry Amendment Compliant Metal StockThis subcontract involves the procurement and delivery of high-grade raw metal stock for prime contractors working on projects for the DLA Weapons Support ASC. The primary objective is to source and certify materials specifically required for NSN 5365-01-025-2858, ensuring all supplies are delivered directly to the manufacturer. A critical requirement of the contract is strict adherence to the Berry Amendment and the Buy American Act. The supplier must provide Mill Test Reports to certify compliance with these domestic sourcing regulations. The work is associated with NAICS code 331110 and is performed in Tracy, California, under the oversight of the Department of Defense.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Manufacture of Flight Deck Light Securing RingsThis subcontract involves the manufacture of 27 Flight Deck Light Securing Rings under NSN 5365-01-025-2858 for the DLA Weapons Support ASC. The selected provider must utilize precision metal forming and machining equipment to ensure all rings meet exact dimensions and tolerances. Final products must be marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E for delivery to Tracy, California. Strict regulatory and quality standards are required for this project, including certification in SAE AS9003 or ISO 9001 quality systems. Additionally, the contractor must maintain CMMC Level 2 and DFARS 252.204-7012 compliance to ensure the security of controlled unclassified information. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.
Machine Shops

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331312
New
DIBBS
Supply of Certified Aerospace-Grade Raw MaterialsThis subcontract involves the supply of certified aerospace-grade raw materials to prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the delivery of certified raw material stock and alloys that strictly adhere to the Buy American Act and the Berry Amendment. To ensure quality and compliance, the provider must maintain full material traceability and provide Mill Test Reports as specified in the Technical Data Package. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties must note the response deadline of October 23, 2026. The procurement falls under NAICS code 331312, focusing on the specialized production of aerospace-grade materials.
Primary Aluminum Production

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Precision Machining and Fabrication of Fluid Filter BodiesThis subcontract involves the precision manufacture of 21 finished, inspected, and packaged Fluid Filter Bodies for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The contractor is required to machine parts according to Drawing 81205 10-3009 Rev D, utilizing CNC machining centers and implementing zero-based sampling plans in accordance with MIL-STD-1916. Performance will take place at Tinker AFB. To be eligible, the provider must hold SAE AS9003 or ISO 9001 certification and maintain strict adherence to ITAR, EAR, and CMMC Level 2 standards. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS