Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on December 7, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

53--CASTER,RIGID

Awarded
SPE7L123U0579Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510
New
DIBBS
Wire Rope Assembly Supplier (NSN 4010-01-689-5572)This subcontract involves the supply of a single leg wire rope assembly for prime contractors supporting DLA supply contracts. The required hardware must be commercial off-the-shelf items meeting NSN 4010-01-689-5572 specifications and must comply with part numbers from either Schutt Industries or McMaster-Carr. All deliverables must adhere to Buy American compliance and undergo quality assurance according to ASQ H1331 or MIL-STD-1916. Logistical requirements specify that packaging must follow ASTM D3951 and MIL-STD-129, with palletization conducted per RP001. The completed assemblies are to be delivered FOB Origin to Camp Ripley, MN. This opportunity is managed under NAICS code 332510 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper OEM Division.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
NAICS: 332510
New
DIBBS
Supply of Self-Locking Gang Channel Nut Assemblies (NSN 5310-01-393-7789)This subcontract involves the supply of 47 aerospace-grade self-locking gang channel nut assemblies under NSN 5310-01-393-7789 for the Department of Defense, specifically supporting DLA and Tinker AFB projects. The components must be produced via precision machining or approved additive manufacturing, with the latter requiring a valid CAGE code and ESA approval. The contractor is required to perform First Article Testing by providing three initial units for government validation before completing the full order. The project falls under NAICS code 332510 and is managed by the DLA Weapons Support ASC Commodities Division, with performance located in Albany.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
NAICS: 332510
New
DIBBS
Supply of Turnlock Receptacles (NSN 5325-00-716-5729)This subcontract involves the supply of 269 turnlock fastener receptacles, identified by NSN 5325-00-716-5729, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The items must be manufactured or sourced in strict accordance with Reference Drawing NR 76301 23M107 (Rev V) or NR 76301 3M304 (Rev L), utilizing either precision machining or approved additive manufacturing equipment to ensure all technical drawing tolerances are met. The contract falls under NAICS code 332510 and specifies the place of performance as Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
NAICS: 332510
New
DIBBS
Retaining Ring Supplier (NSN 5325-01-506-8542)This subcontract involves the supply of six retaining rings for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Aviation Supply Chain. The supplier is responsible for manufacturing or sourcing the rings according to NSN 5325-01-506-8542 specifications and the DLA Master List of Technical and Quality Requirements. All deliverables must be shipped FOB Origin to Fort Sam Houston. Strict adherence to federal regulations is required, including compliance with the Buy American Act and the Berry Amendment. Additionally, the contractor must ensure that all packaging and marking meet the standards set by MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. The opportunity was posted on November 1, 2026, with a response deadline of November 9, 2026, under NAICS code 332510.
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 8 days
NAICS: 332510
New
DIBBS
Manufacturer of Quick Release Plungers (NSN 5340-01-169-2326)This subcontract involves the manufacture of two precision-engineered quick release plungers, identified by NSN 5340-01-169-2326, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected manufacturer must utilize precision machining equipment to fabricate components that strictly adhere to DLA Master List technical and quality requirements. Compliance with the Buy American Act and the Berry Amendment is mandatory, and the use of mercury or mercury compounds during the manufacturing process is strictly prohibited. The contract requires the provider to maintain DFARS 252.204-7012 cybersecurity standards to ensure the protection of sensitive information. Performance of the work is centered in Portsmouth, with the project falling under NAICS code 332510. Interested parties must have submitted their responses by the November 12, 2026, deadline to be considered for this Department of Defense initiative.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
NAICS: 332510
New
DIBBS
Supply of End Chain Links (NSN 4010012959406)This subcontract involves the procurement of 10 specialized chain end links, specifically part number G-340 7/8 inch from The Crosby Group LLC, to support prime contractors for the DLA Weapons Support Aviation Supply Chain. The selected provider is responsible for manufacturing or sourcing the units and ensuring all items are delivered FOB Origin. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129. Additionally, the supplier must maintain full compliance with the Buy American Act and the DLA Master List of Technical and Quality Requirements. Performance for this requirement is centered in Greensboro, North Carolina.
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 8 days
NAICS: 332510
New
DIBBS
Right Hand Bottom Latch (NSN 7310-01-583-1298)This subcontract involves the manufacture or sourcing of 46 Right Hand Bottom Latches, identified as Part Number 50227 and NSN 7310-01-583-1298, for use in the Hydrovection 52567 MDL HV-100-EM system. The components are intended for prime contractors supporting Department of Defense subsistence supply contracts through the DLA Troop Support agency. All units must be delivered FOB Destination to DLA Distribution San Joaquin in Tracy, California. The contractor is required to adhere to strict military standards for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129. Additionally, the agreement mandates full compliance with DFARS 252.225-7001 and DFARS 252.204-7012 regulations. The project falls under NAICS code 332510 and is managed by the Subsistence FSE Supply Chain.
SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 4 days
NAICS: 332510
New
DIBBS
Supplier of Key Washers (NSN 5310012569254)This subcontract involves the manufacture or sourcing of 86 specialized Key Washers under NSN 5310012569254 for the DLA Weapons Support ASC Commodities Division. The supplier is responsible for ensuring all components meet strict technical specifications and undergo quality inspections according to MIL-STD-1916 or ASQ H1331. Additionally, all packaging must be marked in compliance with MIL-STD-129 and ASTM D3951 standards. The contract requires strict adherence to the Buy American and Balance of Payments Program. Final delivery of the units is to be made to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This opportunity falls under NAICS code 332510 and is intended for prime contractors delivering on DLA supply contracts.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
NAICS: 332510
New
DIBBS
Supply of Retaining Rings (NSN 5325004816510)This subcontract involves the procurement of 36 retaining rings under NSN 5325004816510 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing the units in accordance with the DLA Master List and ensuring strict adherence to the Buy American Act. Quality assurance must be maintained through sampling per MIL-STD-1916 or ASQ H1331, with final delivery designated for the MA ARNG UTES 1 facility. Compliance requirements include following MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the contractor must meet NIST SP 800-171 cybersecurity standards. The project falls under NAICS code 332510 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
NAICS: 332510
New
DIBBS
Single Leg Chain Assembly SupplierThis subcontract involves the procurement of a Single Leg Chain Assembly, identified by NSN 4010-01-690-4589 and Part Number SC-48K, to support prime contractors under DLA Weapons Support ASC contracts. The selected supplier is responsible for manufacturing or sourcing the assembly to critical application standards and ensuring all packaging and marking adhere to MIL-STD-129, RP001, and ASTM D3951 specifications. The contract requires strict compliance with the Buy American Act and the Berry Amendment. Final delivery of the completed assemblies must be made to DLA Distribution DDSP in New Cumberland. This opportunity is managed by the Department of Defense under NAICS code 332510, with a response deadline of November 9, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
NAICS: 332510
New
DIBBS
Supply of Industrial Spring (NSN 5360-01-277-0833)This subcontract involves the manufacture or sourcing of two industrial spring units specifically designed to meet the requirements of NSN 5360-01-277-0833. The contractor is responsible for ensuring the components are produced using specified spring steel or alloys and are packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement. These components are intended for prime contractors fulfilling supply contracts for the Department of Defense, specifically the DLA Weapons Support Land Supplier Opns Vehicle Spt. The project falls under NAICS code 332510 and requires delivery to a designated destination in FPO 96677. Interested parties must adhere to the timeline established by the posting date of November 1, 2026, with a response deadline set for November 12, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

in 11 days
NAICS: 332510
New
DIBBS
Supply of Straight Headed Pins (NSN 5315150288213)This subcontract involves the manufacture or sourcing of 47 units of specialized straight headed pins meeting NSN 5315150288213 specifications for prime contractors delivering to the DLA Weapons Support Land Supply Chain. The project falls under NAICS code 332510 and requires strict adherence to quality and logistics standards, including packaging per ASTM D3951, marking and labeling per MIL-STD-129, and palletization according to RP001 DLA Packaging Requirements. The performance of this contract will take place in Barstow, California. Interested parties should note that the solicitation was posted on November 1, 2026, with a response deadline of November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 8 days

AI Contract Overview

Show more

DLA Land and Maritime is soliciting quotes for the procurement of rigid casters under NSN 5340015193087. The initial requirement is for 233 units to be delivered within 114 days after receipt of order, with items shipping to various CONUS and OCONUS DLA Depots. This procurement may result in an Automated Indefinite Delivery Contract with a one-year term or a maximum aggregate value of 250,000.00 dollars. The contract anticipates approximately four orders per year and establishes a guaranteed minimum quantity of 34 units. The approved source for this requirement is 0C1P4 610-160.4. This is a Request for Quote process where all submissions must be handled electronically, as hard copies of the solicitation and technical drawings are unavailable. Interested and responsible sources must submit their quotes by the specified deadline to be considered for the award.

General Info

Agency

Department Of Defense → DLA Land And Maritime

Contract Value

$0

NAICS

332510 - Hardware Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Awardee

CLAYTON ASSOCIATES INC

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Land And Maritime
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / AgencyDepartment Of Defense → DLA Land And Maritime
Office AddressCOLUMBUS, OH, 43218-3990, USA
Contacts
Natalya Radyk
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Proposed procurement for NSN 5340015193087 CASTER,RIGID: Line 0001 Qty 233 UI EA Deliver To: By: 0114 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 250000.00. The estimated number of orders per year is 4. The Guaranteed Minimum quantity will be 34. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 0C1P4 610-160.4. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

NAICS: 332722
New
Federal
VACCO NSNs-Sole Source
Solicitation # CM26265595
DLA Land and Maritime has issued a sources sought solicitation, number CM26265595, to identify potential manufacturers for a variety of hardware components and specialized parts currently associated with Vacco Industries under CAGE code 99517. The required items include fasteners, seals, spacers, sleeve bushings, bearings, and specialized equipment such as pressure indicators and electrical coils. Interested parties must provide information regarding their ability to manufacture these items, including the manufacturer's location and point of contact, and must complete the attached market survey. To be qualified as an Approved Source, companies must submit a comprehensive application package through the DLA Land and Maritime Alternate Offer/Source Approval Request program. This package must include all necessary technical data to prove the contractor can manufacture the products at a quality level equal to or better than the Original Equipment Manufacturer. All responses and documentation should be submitted to Contract Specialist Carlos Oquendo by the deadline of November 6, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 326122
New
Federal
COUPLING ASSEMBLY,SELF-SEALING
Solicitation # CM26208001
This pre-solicitation notice issued by the DLA Land and Maritime organization is for the procurement of self-sealing coupling assemblies, identified by National Stock Number 4730-010957013. The estimated annual demand is 3,534 units, with price break ranges spanning from 221 to 5,304 units. The solicitation is expected to be available on DIBBS on or after December 7, 2026, with a revised response deadline of December 7, 2026. Performance will take place in Columbus, Ohio, and the acquisition follows the policies for commercial items. Because the government lacks complete technical data, the contract will be awarded only to approved sources, which include Eaton, Sikorsky Aircraft Corp, Allen Aircraft Products Inc, and AAR Supply Chain. Award decisions will be based on a combination of price, delivery, and past performance. Requirements include Contractor First Article and Contractor Production Lot Testing, and all offers must be submitted in English and U.S. dollars. Technical drawings and specifications are accessible via the TDMT portal.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 335999
New
Federal
Pressure Switch Component SupplierThe Pressure Switch Component Supplier subcontract involves providing essential raw materials and sub-components to prime contractors manufacturing pressure switches for DLA Land and Maritime. The scope of work includes the delivery of high-grade alloys, specialized polymers, conductive materials, springs, electronic contacts, and specialized seals. All supplied materials must adhere to strict performance tolerances and specific coating requirements to ensure operational integrity. To maintain quality standards, the supplier is required to provide comprehensive material certifications and Certificates of Conformance for all deliveries. The contract falls under NAICS code 335999 and supports the Department of Defense. Interested parties should note the response deadline of November 4, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 335313
New
Federal
Pressure Switch Manufacturer (NSN 5930-01-324-5328)This subcontract involves the manufacture and supply of pressure switches, specifically NSN 5930-01-324-5328, for prime contractors supporting DLA Land and Maritime hardware. The selected provider must utilize precision machining and assembly equipment to fabricate these switches in strict accordance with military specifications or approved technical data. A critical requirement of the contract is the submission of application packages through the DLA Weapons Support Alternate Offer/Source Approval Request Program to obtain AMC 3C approval. This opportunity falls under NAICS code 335313 and is managed by the Department of Defense.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 335313
New
Federal
Switch, Pressure
Solicitation # CM26239122
DLA Land and Maritime, specifically the FMS Tactical LTC Team at DLA Weapons Support - Columbus, is conducting a sources-sought market survey for the procurement of Pressure Switches under NSN 5930-01-324-5328. The agency is seeking information from potential vendors regarding delivery timelines, quantity capabilities, and pricing structures to determine the feasibility of an Indefinite Delivery Contract with a proposed three-year base period and subsequent one-year option periods. The government is specifically looking for data on commercial availability and is requesting drawings or bills of materials to identify similarities between commercial and military equivalents. The current approved source for this item is Cameron Energy Services Corp, identified by CAGE code 05991 with multiple associated part numbers. Due to the AMC 3C designation, this part requires engineering source approval to maintain quality, as the approved sources retain essential technical data and manufacturing knowledge. Other companies wishing to be qualified as approved sources must submit an application package through the DLA Weapons Support Alternate Offer/Source Approval Request Program to demonstrate their ability to manufacture the product to the same or better quality than the original equipment manufacturer. Responses should be directed to Contract Specialist Caitlin Ferry by the deadline of November 4, 2026.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 335999
New
Federal
INSULATING COMPOUND,ELECTRICAL
Solicitation # CM26161009
This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

5 days ago

DEADLINE

in 29 days
View Details
NAICS: 332212
Federal
Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.
Hand and Edge Tool Manufacturing

POSTED

12 days ago

DEADLINE

in 2 days
View Details
NAICS: 339999
Federal
Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.
All Other Miscellaneous Manufacturing

POSTED

12 days ago

DEADLINE

in 2 days
View Details
NAICS: 333618
Federal
Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.
Other Engine Equipment Manufacturing

POSTED

12 days ago

DEADLINE

in 2 days
View Details
NAICS: 332710
Federal
Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.
Machine Shops

POSTED

12 days ago

DEADLINE

in 2 days
View Details
NAICS: 333618
Federal
MULTI NSN DIESEL ENGINE
Solicitation # CM26259595
DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.
Other Engine Equipment Manufacturing

POSTED

12 days ago

DEADLINE

in 2 days
View Details
NAICS: 339991
Federal
SEAL, PLAIN 6649
Solicitation # SPE7MX26RX033
This solicitation seeks to establish an Indefinite Quantity Contract for stock replenishment of plain seals to support military depots. Managed by DLA Weapons Support in Columbus, Ohio, the requirement focuses on NSN 5330-00-631-6649 with an estimated annual demand of 15,721 units. The procurement is designated as a Total Small Business Set-Aside and will be conducted using other than full and open competition procedures, as the items are available from a limited number of approved sources including The Timken Corporation, Randall Mfg Co Inc, Basic Rubber and Plastics Co, and PDI Ground Support Systems, Inc. The solicitation is expected to be available around October 20, 2026, with a response deadline of November 5, 2026. While price is a significant factor, the final award decision will be based on a combination of price, past performance, and delivery. Interested responsible sources may submit quotes via the DIBBS portal, though drawings and specifications will not be provided through that system.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

16 days ago

DEADLINE

in 3 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332510
Awarded
Federal
53--STRAP,RETAINING
Solicitation # SPE7L123U0576
DLA Land And Maritime

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 332510
Awarded
Federal
53--HARDWARE KIT,MECHAN
Solicitation # SPE7L122U2857
DLA Land And Maritime

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 332510
Awarded
Federal
53--LOOP,STRAP FASTENER
Solicitation # SPE7L123U0383
DLA Land And Maritime

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 332510
Awarded
Federal
Multiple NSNs Supporting Various Weapon Systems for Long Term Contract
Solicitation # SPE4A623R0062
DLA Aviation

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 332510
Awarded
Federal
53--ROD END,THREADED
Solicitation # SPE4A523T3251
DLA Aviation

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 332510
Awarded
Federal
53--CLIP,SPRING TENSION
Solicitation # SPE7L323U0528
DLA Land And Maritime

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 332510
Awarded
Federal
53--PLUG,PROTECTIVE,DUS
Solicitation # SPE7L123U0522
DLA Land And Maritime

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 332510
Awarded
Federal
53--BRACKET,ANGLE
Solicitation # SPE7L323T4916
DLA Land And Maritime

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 332510
Closed
Federal
Repair Kit, Rod and Seal
Solicitation # 70Z08523QAN026B00
Sflc Procurement Branch 2(00085)

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 332510
Awarded
Federal
53--BRACKET,MOUNTING
Solicitation # SPE4A123T0662
DLA Aviation

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 332510
Awarded
Federal
53--MOUNT,RESILIENT,WEA
Solicitation # SPE4A723T4446
DLA Aviation

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details
NAICS: 332510
Awarded
Federal
53--RING,RETAINING
Solicitation # SPE4A623T187F
DLA Aviation

POSTED

almost 4 years ago

CLOSED

almost 4 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS