Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GASKET

Active
SPE7LX-26-U-9506Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 14 gaskets identified by NSN 5330-01-670-3180, with a delivery requirement of 71 days ADO. All supplied items must be free of asbestos, and any alternative materials or substitutions must comply with Clause L30 and Provision 4 conditions. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must meet DLA requirements, and non-accepted supplies must have all government identification removed. Covered defense information provisions may apply, and all items must be marked in accordance with MIL-STD-130N dated November 16, 2012. The solicitation is a total small business set-aside under NAICS code 339991, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with response deadline August 25, 2026, and posted on August 10, 2026. Primary point of contact is Theodore Misiolek, reachable via email and phone provided.

General Info

Small business sole source for 14 gaskets, NSN 5330016703180, delivery in 71 days, electronic quotes only via SAM.gov by August 25, 2026.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUSA
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GASKET
GASKET
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY "ITEMS SUPPLIED MUST BE FREE OF ASBESTOS. LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE WITH CLAUSE L30 AND PROVISION 4 CONDITIONS FOR NSN/Part Number: 5330-01-670-3180 Quantity: 14 EA Purchase Request: 1000239537QTY: 14 Delivery: 71 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
O-Ring Supply (NSN 5331-01-616-8986)
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Manufacture and Supply of Shielding Gaskets (NSN 5999015164389)
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Supply of Plain Seal (NSN: 5330-01-511-5641)
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Supply of Nonmetallic Strip Seals (NSN 5330-01-649-5588)The contract requires the procurement and delivery of four units of nonmetallic strip seals meeting military specifications and packaging standards, with a strict delivery timeline of five days from the date of order. Each seal must be free of asbestos and approved by government authorities if any alternative materials are proposed, ensuring compliance with safety and regulatory requirements. The item is identified by NSN 5330-01-649-5588 and falls under NAICS code 339991, indicating it is part of a specialized manufacturing category. The contract is a subcontract issued by the Department of Defense through the LAND SUPPLY CHAIN agency, with performance required at the location in Anniston, Alabama, 36201-5021. The solicitation was posted on August 10, 2026, and responses must be submitted by August 21, 2026, establishing a limited window for bids. The contract does not specify a set-aside status, and while the point of contact details are not provided, all communications and submissions must align with the official DIBBS platform link for proper handling.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
C-SEAL Manufacturing and Supply
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7LX-26-U-9382
This contract pertains to the procurement of 2,717 units of RETAINER, PACKING with NSN 5330-01-154-7159 under solicitation SPE7LX-26-U-9382, issued as a Total Small Business Set-Aside. The requirement mandates compliance with all applicable technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the controlling revision determined by the solicitation issue or award date depending on acquisition size. The item is explicitly prohibited from containing any asbestos as defined in Fed-Std-313 and has been approved for manual exclusion from the First Destination Packaging Program, meaning it is not eligible for standard commercial packaging and must meet proprietary packaging specifications. Delivery must be completed within 94 days after award, and all supplies must be free of government identification if not accepted. The procurement is managed by the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek listed as the primary point of contact. The NAICS code is 339991, indicating the item falls under Other Miscellaneous Manufacturing, and the solicitation was posted on August 10, 2026, with responses due by August 25, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-171D
Offerors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with the Berry threshold now set at $150,000, requiring full disclosure of any non-domestic materials used in quoted items. The solicitation prohibits the use of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and no items produced via additive manufacturing may be included unless explicitly approved by the contracting officer. Due to fluctuating demand, offerors are strongly encouraged to provide quantity ranges rather than fixed numbers to allow buyers flexibility in combining or adjusting requirements without additional administrative steps, though this does not apply to Auto IDC. All offerors submitting quotes must ensure they are registered or will register via DLA’s Account Management & Provisioning System to gain access to the Vendor Shipment Module, with contractors using VSM WebServices required to update their internal schema by the specified deadline; failure to do so will result in loss of shipping ability. Small business joint ventures must submit all required representations under FAR provisions 52.212-3 and 52.219-1 for applicable categories. Offerors who cannot submit a bid by the closing date must file a “No Bid” on DIBBS with an anticipated quote date or reason, to avoid assumptions of non-responsiveness. Fast Pay is not applicable, and all quotations must reference the correct NSN and purchase request. APEX Accelerators offers free assistance to businesses seeking to compete for government contracts. The item in question is a gasket, with a required quantity of 75 units to be delivered within 264 days to Cherry Point, North Carolina, under solicitation SPE7L3-26-T-171D, and all responses must be submitted via DIBBS before the deadline.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9417
This contract is for the supply of SEAL, PLAIN items under solicitation SPE7LX-26-U-9417, designated as a total small business set-aside with a NAICS code of 339991. The items are identified by NSN 5330-01-282-0909 and part numbers 063000143 and A-000-232-113-000, with a total quantity of 14 units delivered in a single line item at a unit price of $14.00. Delivery is required within 112 days from the origin point under FOB terms, with no variance permitted in quantity, and both inspection and acceptance occur at the destination. The item is classified as a critical application with a non-extendable shelf life of 180 months, requiring at least 85% of that shelf life to remain at the time of delivery. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag, and must adhere to MIL-STD-2073-1E for preparation and MIL-STD-129 for marking—with special marking code 32 indicating Type I shelf-life status. Palletization follows DLA’s packaging requirements, and intermediate containers must meet MIL-P-4861 specifications. The contract strictly prohibits the use of ozone-depleting chemicals and intentional addition of mercury or mercury compounds, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, and certain reagents approved by NAVSEA. Mercury-containing portable lamps and instruments must have shockproof construction and a secondary containment barrier as defined by NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. Configuration changes require formal engineering change proposals, and any deviations or waivers must be formally requested. The item is subject to Covered Defense Information protocols, and packaging and shipping of hazardous materials must follow IP025 standards. All documentation and markings must conform to MIL-STD-130N for identification of U.S. military property and the contract uses the DoD-authorized unit of issue as defined in official DLA resources.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9464
The contract pertains to the procurement of SEAL, PLAIN ENCASED, identified by NSN 5330-01-614-9289 and part number 556101 from SKF USA INC., with a total quantity of 59 units at a unit price of $59.00, resulting in a total price of $3,481. The item is subject to strict packaging requirements under MIL-DTL-117, TYPE II, CLASS C, STYLE 1, mandating medium duty, waterproof, greaseproof, and opaque bagging to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required and palletization following DLA packaging standards. The item is prohibited from containing asbestos as defined in FED-STD-313 and must be delivered FOB origin within 71 days with zero variance in quantity. Inspection and acceptance occur at the destination. The solicitation is a total small business set-aside under NAICS code 339991, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7M4-26-T-329R
The contract pertains to the procurement of 1,758 units of RETAINER, PACKING with NSN 5330-00-419-2969 under solicitation SPE7M4-26-T-329R, issued by the Department of Defense’s Fluid Handling Division. The item is classified as a commercial item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The retainer must be manufactured to the current revision of its governing part standard, and prior iterations of the standard are acceptable for historically produced hardware, but all new production must adhere to the latest standard. The item is subject to stringent material restrictions: no asbestos as defined in FED-STD-313 is permitted, and mercury or mercury-containing compounds must not be intentionally added or come in direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The supplies must be delivered within 63 days of award to Tracy, California, with a response deadline of August 21, 2026, and the procurement is fully competitive under a federal specification. Point of contact for inquiries is Freddie Vazquez at the provided email and phone number.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE4A5-26-T-338V
The contract specifies the procurement of a SEAL, PLAIN item identified by part number 1170-02-750-1-0 from Saint-Gobain Performance Plastics and 7780001-230 from Parker-Hannifin Corporation, classified as a commercial item and designated as a Critical Application Item. It is governed by the DLA Master List of Technical and Quality Requirements, incorporating standards such as MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise stated. Inspection and acceptance occur at origin, with strict adherence to MIL-STD-2073-1E packaging, MIL-STD-129 marking, and DLA packaging requirements. The item must be sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor deliveries, foreign military sales, and stock shipments. No asbestes is permitted, and government identification must be removed from non-accepted supplies. The item is assigned NSN 5330-00-338-2593 with a quantity of seven units, delivered FOB origin within 97 days, and subject to zero variance in quantity. Packaging and shipping follow detailed DLA protocols, including palletization and hazardous materials handling per IP025, with delivery directed to Robins Air Force Base in Georgia. All documentation, source approval, and configuration management must comply with applicable contractual requirements, and the contract’s revision control aligns with DLA’s master list effective on the RFP issue date.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, SEAL
Solicitation # SPE7L3-26-T-171E
The contract specifies the procurement of one retainer, seal with NSN 5330-01-651-0413, under solicitation SPE7L3-26-T-171E, with a response deadline of August 21, 2026, and a delivery requirement of 164 days after order. All supplies must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging, preservation, marking, and configuration management adhere to specific DLA and FAA standards including RP001, RP003, RQ002, RQ011, and RQ046, which govern federal commercial material handling and labeling. The item is to be delivered to New Cumberland, Pennsylvania, 17070-5002, under the Department of Defense’s Land Supplier Operations Vehicle Support agency, with Susan Diamond listed as the primary point of contact for inquiries.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9451
This contract pertains to the procurement of a commercial off-the-shelf item identified as AM-01-3 by Ameritape LLC, with NSN 5340015599845, under solicitation SPE7LX-26-U-9451. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, requiring strict adherence to MIL-STD-130N for identification marking and MIL-STD-129 for packaging and labeling, including the special marking code 32 for shelf-life compliance. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, containment, and palletization per DLA’s procurement requirements. The quantity is fixed at 169 units with zero variance allowed, delivered FOB origin within 116 days, with inspection and acceptance occurring at destination. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical attributes are verified at Level VII or AQL 0.1. The contract is subject to DLA’s Master List of Technical and Quality Requirements, with Covered Defense Information applicable. This is a total small business set-aside under NAICS code 332722, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek designated as the point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7LX-26-U-9483
The item is a nonmetallic seal with NSN 5330-01-568-3876, quantity of 130 units, under purchase request 1000239501, with a delivery requirement of 52 days after order award. This procurement is governed by Defense Logistics Agency packaging requirements and is subject to strict export control regulations under ITAR or EAR, meaning any technical data associated with the seal cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States or foreign subsidiaries of U.S. companies, without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies to this technical data, and only DLA contractors with an approved US/Canada Joint Certification Program status, who have completed mandatory training on handling DOD export-controlled data and submitted the DLA export-controlled data questionnaire, are permitted to access or handle the data. The solicitation number is SPE7LX-26-U-9483, posted on August 10, 2026, with a response deadline of August 25, 2026, under NAICS code 332722, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense, with Theodore Misiolek as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7LX-26-U-9366
The contract pertains to the procurement of a KNOB with NSN 5355-00-072-1991 and part number 247039, supplied by C&H HYDRAULICS INC under a Women-Owned Small Business Set-Aside solicitation numbered SPE7LX-26-U-9366. The request is for 25 units, each to be delivered FOB origin within 191 days, with no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements, including palletization as specified. The unit of issue is each, and inspection and acceptance occur at the destination. The contract specifies a unit price of $25.00, totaling $625.00, and confirms this is an estimated quantity subject to change. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336992
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7LX-26-U-9369
This contract specifies the procurement of a CAP, FILLER OPENING component for use on the LAV-25 Light Armored Vehicle’s fuel tank, identified by NSN 2590-01-166-0624 and assigned to purchase request 1000239403. The item is sourced from two approved suppliers, MAGNA STEYR FUEL SYSTEMS GMBH and GENERAL DYNAMICS LAND SYSTEMS CANADA, with a contract quantity of 48 units at a unit price of $48.00, totaling $2,304.00. The contract falls under DLA DIRECT coverage within the Continental United States and is governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Compliance with MIL-STD-129 for marking and labeling is mandatory, and all packaging must adhere to RP001 DLA Packaging Requirements for Procurement including palletization. The item is classified as a Critical Application Item, meaning failure could compromise mission readiness or safety. Delivery is required FOB origin within 99 days of contract award, with no variance permitted in quantity—zero percent plus or minus. Inspection and acceptance both occur at the destination point, and government identification must be removed from all non-accepted supplies. The contract references the DLA eProcurement portal for technical and quality specifications, and requires compliance with the DLA Unit of Issue and Purchase Unit standards. The solicitation number is SPE7LX-26-U-9369, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek listed as the primary point of contact. The NAICS code 336992 indicates classification under Other Transportation Equipment Manufacturing, and all documentation and packaging must strictly align with the latest DLA directives in effect as of the solicitation issue date.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336360
New
DIBBS
SEAT, VEHICULAR
Solicitation # SPE7LX-26-U-9494
The contract pertains to the procurement of 48 vehicular seats under NSN 2540-01-568-2329, with a delivery deadline of 107 days after order. It is issued under solicitation SPE7LX-26-U-9494, with a response deadline of August 25, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, targeting NAICS code 336360 for motor vehicle body manufacturing. The item contains technical data subject to export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including U.S. company subsidiaries and foreign nationals within the United States, without explicit authorization from the Department of State or Commerce. DFARS 252.225-7048 governs compliance, and access to this data is restricted to contractors holding a valid US/Canada Joint Certification Program certification, having completed mandatory DLA training on export-controlled data handling, and received formal approval from the DLA controlling authority. Additionally, the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization, ensuring adherence to cybersecurity standards for handling sensitive information. The contracting office is the Strategic Acquisition Program Directorate within the Department of Defense, with Theodore Misiolek listed as the primary point of contact.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
GEAR, WORM WHEEL
Solicitation # SPE7LX-26-U-9414
The contract pertains to the procurement of a worm wheel gear, identified by part number EJ31125 and NSN 3020-01-282-5182, with a quantity of 23 units to be delivered within 92 days under the solicitation SPE7LX-26-U-9414. Delivery is FOB origin, and inspection and acceptance occur at the destination. The item is classified as a critical application item and must comply with DLA packaging requirements referencing MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging details including preservation method 20, wrapping material GB, and no cushioning material. No special marking is required, and palletization must adhere to DLA standards. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional uses in batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must be shockproof and have a secondary containment boundary as mandated by NAVSEA 5100-003D. The unit of issue is each, the unit price is $23.00, and the total value is $529.00, with zero variance allowed in quantity. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, applicable based on the solicitation issue date or amendment date. The supplier is The Entwistle Company LLC, and the point of contact is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336360
New
DIBBS
FOOT REST, VEHICULAR
Solicitation # SPE7LX-26-U-9490
This contract is for the procurement of 60 vehicular foot rests with part number 105-200550-001 and NSN 2540-01-565-9989, issued under solicitation SPE7LX-26-U-9490 by the Department of Defense’s Strategic Acquisition Program Directorate. The item is designated as a critical application component and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The product is prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by specifications. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific packaging methods, materials, and palletization defined under DLA’s packaging guidelines, including the use of intermediate containers and approved cushioning. The item is to be delivered FOB origin within 118 days with zero variance in quantity, and inspection and acceptance occur at the destination point. Sampling and quality assurance follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Unspecified attributes are treated as major. The contract specifies the use of DLA’s authorized unit of issue and references official resources for unit conversion. The vendor, RAVELIN DEFENSE, INC., is required to meet all technical, packaging, and delivery stipulations without deviation. The solicitation was posted on August 10, 2026, with responses due by August 25, 2026, under a federal procurement code NAICS 336360, and point of contact for inquiries is Theodore Misiolek. The estimated quantity is not guaranteed for full purchase by the IDC, and all items must conform to federal defense material standards without exception.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
CHUTE, EJECTION
Solicitation # SPE7LX-26-U-9477
This contract pertains to the procurement of a ejection chute, identified by NSN 1005015521264 and part number TYUW10020A-ETYU, with a quantity of five units to be delivered under solicitation SPE7LX-26-U-9477. Delivery is required within 533 days, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering strictly to MIL-STD-129 and no special marking codes applied. The item is classified as a covered defense item and falls under demilitarization guidelines for Category I munitions, requiring strict handling and disposal protocols. The contractor must retain supply chain traceability documentation as mandated by DLAD Procurement Note C03 from August 2016, ensuring end-to-end accountability. The contract enforces compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements, indicating the need for documented cybersecurity practices to protect sensitive government information. The procurement is under a direct DLA contract for CONUS delivery, using the DoD unit of issue, and the seller is BAE SYSTEMS LAND & ARMAMENTS L.P. The estimated quantity is non-binding and may not be fully purchased by the IDC. The point of contact for inquiries is Theodore Misiolek, with the solicitation issued on August 10, 2026, and responses due by August 25, 2026. The NAICS code 332994 identifies the industry classification, and the procurement is managed by the Department of Defense’s Strategic Acquisition Program Directorate. All technical and quality requirements referenced are governed by the DLA Master List, with revisions controlled based on solicitation or award dates.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9415
This contract, identified by solicitation number SPE7LX-26-U-9415, is a total small business set-aside under NAICS code 332510 for the procurement of 72 units of COVER, ACCESS with NSN 5340-01-245-2424, requiring delivery within 58 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The item must be manufactured using a metal casting process, and tooling is essential for production; sourcing and engineering support are available through designated DLA aviation and land-maritime supply chain teams. The contract prohibits the use of Class I ozone-depleting chemicals in any component or process, overriding any conflicting specification but not exempting the product from its performance requirements, and mandates prior approval for all substitute chemicals. Technical data associated with the item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to such data is limited to contractors with approved JCP certification, completed DOD export control training, and prior DLA authorization. The contractor must also hold Cybersecurity Maturity Model Certification (CMMC) Level 2 certification from a certified third-party assessment organization. Additionally, all supplies must have government identification removed if not accepted, and the contract falls under DLA’s Controlled Defense Information protocols. The point of contact is Theodore Misiolek, reachable via email or phone, and all responses are due by August 25, 2026.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333618
New
DIBBS
PARTS KIT, DIESEL ENGIN
Solicitation # SPE7LX-26-U-9420
The contract covers the procurement of a Parts Kit for a diesel engine, specifically identified as the Geislinger Coupling, with the NSN 2815-01-547-7099 and part number P12620635, to be supplied by Everlence USA Inc. and Fairbanks Morse, LLC. A total quantity of six kits is required, with no variance allowed in delivery quantity, and delivery is to be made FOB origin within 88 days. The kits must be packaged and preserved in strict compliance with MIL-STD-2073-1E Appendix D for kits, and all marking, labeling, and palletization must conform to MIL-STD-129 and DLA Packaging Requirements. Inspection and acceptance occur at the destination, and government identification must be removed from any non-accepted supplies. The unit of issue is KT, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements in effect at the time of solicitation issuance. The contract is issued under solicitation SPE7LX-26-U-9420 by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact, and it is targeted for delivery to CONUS under DLA Direct coverage.
Other Engine Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details