Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Award Notice opportunity from Department Of Defense was posted on September 26, 2012. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

53--LATCHES

Awarded
N6339412T5177Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510
New
DIBBS
Surface Plate Casting and ProductionThis subcontract for the Defense Logistics Agency involves the manufacture of a single finished surface plate for prime contractors. The scope of work includes metal casting and the development of specific tooling required to produce the component. All items must be packaged according to ASTM D3951 and the DLA Master List of Technical and Quality Requirements. The project is categorized under NAICS code 332510 and will be performed in Johnston, Iowa. To be eligible, the contractor must maintain NIST SP 800-171 compliance and complete a CMMC Level 2 Self-Assessment. Responses to the solicitation are due by November 16, 2026.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

in 9 days
NAICS: 332510
New
DIBBS
Loop Clamp Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 32 loop clamps, part number 7019031310, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all units meet strict technical specifications and adhere to specific military standards for marking, palletization, and packaging, specifically MIL-STD-129, RP001, and MIL-STD-2073-1E. Additionally, any hazardous items must be labeled in accordance with the Hazard Communication Standard 29 CFR 1910.1200. The final deliverables must be shipped to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. This procurement falls under NAICS code 332510 and is managed under the Department of Defense. The response deadline for this requirement is November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 9 days
NAICS: 332510
New
DIBBS
Hinge Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of five hinge assembly units, identified by NSN 5340014718518, for prime contractors under the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider must manufacture the hardware according to strict technical specifications, utilizing MIL-STD-1916 for sampling and quality inspection, while adhering to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Performance of the contract will take place in San Diego, California. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure CMMC Level 2 compliance. Additionally, the submission of Source Approval Request documentation is required. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332510.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Supply of Wire Strand Band (P/N 79/15VZ)This subcontract involves the supply of a high-precision wire strand band, part number 79/15VZ manufactured by Lex Products, LLC, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to military standards, specifically MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The contract specifies the delivery of one unit on a FOB Origin basis with a required delivery timeframe of five days. Performance is associated with NAICS code 332510 and is centered in Tampa, Florida, under the oversight of the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Supply of Machine Bolts (NSN 5306991144430)This subcontract involves the supply of 38 units of machine bolts, identified by NSN 5306991144430, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier must ensure all units meet specific material specifications and adhere to strict packaging and labeling standards, including ASTM D3951, MIL-STD-129, and RP001 DLA Packaging Requirements. Additionally, the contractor is required to comply with all DPAS rating requirements to ensure prioritized delivery. The completed order is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma located at Tinker AFB. This procurement falls under NAICS code 332510 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Manufacturing of Straight Headed Pins (NSN 5315-0119-17595)This subcontract involves the manufacture of straight headed pins under NSN 5315-0119-17595 for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The selected contractor must utilize precision machining and forming equipment to fabricate the pins and ensure strict adherence to quality control and sampling standards per MIL-STD-1916 or ASQ H1331. Compliance with the Buy American Act is mandatory, and the provider must hold either SAE AS9003 or ISO 9001 certification. The scope of work requires the delivery of five finished pins FOB Origin to the DLA Distribution DDSP New Cumberland Facility. This opportunity falls under NAICS code 332510 and was posted by the DLA Weapons Support ASC Supplier OEM Division. Interested parties must submit their responses by November 13, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Loop Clamp SupplierThis subcontract involves the supply of loop clamps for prime contractors working on DLA Weapons Support ASC projects under the Department of Defense. The selected supplier is responsible for manufacturing or sourcing a specific loop clamp, NSN 5340-01-612-5776, ensuring it adheres to the DLA Master List of Technical and Quality Requirements. All items must be packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. The contract requires the delivery of the completed hardware components to the designated destination point within 20 days of the award. Performance will take place in Lenoir, North Carolina, under NAICS code 332510. Interested parties must respond by the deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Mounting Bracket Fabrication (NSN 5340-01-386784-1)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the fabrication and supply of 28 mounting brackets identified as NSN 5340-01-386784-1. The project involves utilizing casting and forging processes with specialized tooling to produce units that meet Critical Application Item quality standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside. A critical requirement for the contractor is strict compliance with NIST SP 800-171 standards to ensure the proper safeguarding of covered defense information. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 9 days
NAICS: 332510
New
DIBBS
Supply of Butt Hinges (NSN 5340-01-710-4966)This subcontract involves the supply of 8 units of butt hinges, part number 148T8221U7, to support prime contractors under DLA supply contracts. The parts must be sourced according to Boeing specifications and undergo sampling in accordance with MIL-STD-1916 or ASQ H1331. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards. The contractor is required to maintain SAE AS9100 quality standards and possess FAA Airworthiness Approval. The final delivery of the marked and packaged units is designated as FOB Origin, with the destination being DLA Distribution DDSP New Cumberland. This procurement is managed by the DLA Weapons Support Land Supply Chain under the Department of Defense.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 9 days
NAICS: 332510
New
DIBBS
Needle Roller Bearing SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the delivery of 20 specialized needle roller bearings, identified by NSN 3110-01-248-7841. The bearings must be manufactured in the United States, its outlying areas, or Canada to comply with specific restrictions on the acquisition of ball and roller bearings. All components must adhere to the technical and test requirements outlined in the associated technical drawings. The contractor is required to maintain compliance with CMMC Level 2 and CDI requirements. This procurement falls under NAICS code 332510 and supports prime contractors fulfilling DLA supply contracts. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Supply of Solid Rivets (NSN 5320-01-057-3176)This subcontract involves the supply of 4,290 solid rivets conforming to NSN 5320-01-057-3176 for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The project requires strict adherence to MIL-STD-129 for all packaging and marking, with logistics managed via First Destination Transportation. Performance will take place at Tinker AFB. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332510. Interested parties must respond by November 13, 2026, to fulfill the requirements of the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Access Door Hinge SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, requires the supply of 14 specialized access door hinges identified by NSN 5340-01-485-6825. The contractor is responsible for manufacturing or sourcing these components, with the possibility of utilizing additive manufacturing provided that ESA approval is obtained. All deliverables must be packaged according to ASTM D3951 standards for non-hazardous materials and palletized following RP001 guidelines. The place of performance for this contract is located in Cherry Point, and the procurement falls under NAICS code 332510.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 6 days

AI Contract Overview

Show more

The Naval Surface Warfare Center Corona Division, Force Training Assessment Department, is seeking to acquire Hartwell latches for the Large Area Tracking Range System. The government intends to award a sole-source, firm fixed price contract to the Hartwell Corporation under the authority of FAR 6.302-1, treating the procurement as a commercial item in accordance with FAR Part 12. Because this is a sole-source action, no formal solicitation will be issued. However, interested parties may submit inquiries, capability statements, or identify their interest to the designated point of contact. This notice serves as an announcement of intent rather than a request for competitive quotes or proposals.

General Info

Agency

Department Of Defense → Commanding Officer

Contract Value

$71,518.1

NAICS

332510 - Hardware Manufacturing

Place of Performance

CA, USA

Set-Aside

NONE

Awardee

HARTWELL CORPORATION

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

special-notice

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Commanding Officer
ContactsNo contacts available
OfficePORT HUENEME, CA, 93043-5007, USA
Organization / AgencyDepartment Of Defense → Commanding Officer
Office AddressPORT HUENEME, CA, 93043-5007, USA
ContactsNo contact information available

Full Description

Show more
The Naval Surface Warfare Center Corona Division, Force Training Assessment Department requires the acquisition of Hartwell latches for the Large Area Tracking Range System The government intends to award a sole-source, firm fixed priced contract to Hartwell Corporation. This procurement is commercial item IAW FAR Part 12. No solicitation will be issued but responsible sources may submit inquiries or request for information to contact@example.gov or by phone at +1 (555) 000-0000. THE GOVERNMENT INTENDS TO SOLICIT AND NEGOTIATE WITH ONLY ONE SOURCE UNDER THE AUTHORITY OF FAR 6.302-1 FOR THIS PROCURMENT ACTION. INTERESTED PARTIES MAY IDENTIFY THEIR INTEREST AND CAPABILITY TO RESPOND TO THE REQUIREMENT, OR SUBMIT CAPABILITY STATEMENTS. THIS NOTICE OF INTEREST IS NOT A REQUEST FOR COMPETITIVE QUOTES OR PROPOSALS.

More opportunities from Department Of Defense → Commanding Officer

Same awarding agency

NAICS: 561790
New
Federal
Weatherproofing Surveillance and Warranty MaintenanceThis Small Business Set Aside subcontract, titled Weatherproofing Surveillance and Warranty Maintenance, involves providing recurring inspections and emergency repair services for prime contractors on Naval Surface Warfare Center PHD projects. The scope of work includes conducting surveillance every 60 to 90 days, performing seal touch-ups, and replacing desiccants to ensure structural integrity. The contractor is responsible for generating detailed incident repair reports and photo documentation, with a strict reporting requirement of three to five business days. Deliverables include quarterly inspection summaries and emergency incident reports. This effort falls under NAICS code 561790 and is managed under the Department of Defense.
Other Services to Buildings and Dwellings

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 423840
New
Federal
Industrial Polyester Strapping and Fastener SupplierThis subcontract opportunity is for a supplier to provide high-strength fastening hardware to prime contractors supporting Naval Surface Warfare Center PHD projects. The scope of work involves the delivery of 3/4-inch woven polyester strapping with a minimum break strength of 1,500 lbs, along with compatible phosphated wire buckles or heavy-duty ratchets, directly to the project site. Managed by the Department of Defense under the Commanding Officer, this requirement is designated as a total Small Business Set Aside under NAICS code 423840. The performance location is associated with zip code 93043, and the response deadline for interested parties is November 20, 2026.
Industrial Supplies Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238390
New
Federal
Modular Unit Weatherproofing and Tensioning ContractorThis small business set-aside subcontract involves providing on-site surface preparation and the installation of tensioned weatherproofing wraps for prime contractors supporting Naval Surface Warfare Center PHD projects. The scope of work requires the installation of envelopes from the chassis line over walls and roofs using 3/4-inch woven polyester strapping with ratchets and non-penetrating fastening. The contractor is responsible for delivering 41 weather-tight modular units while utilizing scissor lifts and maintaining strict compliance with Naval Base Ventura County Installation Appearance Standards. The project is managed under the Department of Defense and is categorized under NAICS code 238390. Performance will take place in zip code 93043. Interested parties must adhere to the response deadline of November 20, 2026.
Other Building Finishing Contractors

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 326111
New
Federal
Marine-Grade Polyethylene Weatherproofing Film SupplierThis small business set-aside subcontract involves the supply of marine-grade virgin polyethylene resin film for prime contractors working on Naval Surface Warfare Center PHD projects. The required material is an opaque, reflective white weatherproofing membrane with a thickness of 10-mil. To ensure durability and safety in coastal environments, the film must include UV inhibitors for solar exposure and flame-retardant additives that comply with NFPA 701 Method 1 and 2 standards. The selected supplier is responsible for delivering the bulk membrane to Port Hueneme, California. This opportunity is categorized under NAICS code 326111 and is managed by the Commanding Officer within the Department of Defense. Interested parties must submit their responses by November 20, 2026.
Plastics Bag and Pouch Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238390
New
Federal
Weatherproofing Units
Solicitation # N6339427Q4006
This solicitation, N6339427Q4006, is a total small business set-aside for the procurement, delivery, and on-site assembly of a turnkey weatherproofing system for forty-one wood-framed modular workspace units at Naval Base Ventura County in Port Hueneme, California. The project covers 58,772 square feet of aggregate surface area, consisting of thirty 12x36 foot units and eleven 12x16 foot units. The required system must utilize a minimum 10-mil virgin polyethylene resin film with UV inhibitors and flame-retardant additives meeting NFPA 701 standards. Protection must extend from the bottom chassis to the roofline, excluding the bottom 3-foot poly stilts, using non-penetrating fastening methods such as 3/4-inch woven polyester strapping with a 1,500 lb break strength. The contractor is responsible for all surface preparation, precision fitting, and the provision of all necessary equipment, including scissor lifts and safety gear. Performance includes a twelve-month maintenance period with recurring inspections every 60 to 90 days and emergency repair responses. Award will be based on the lowest priced, technically acceptable offer, with technical capability evaluated against specific part numbers and past performance assessed on a pass/fail basis. The period of performance is scheduled from December 7, 2026, to December 6, 2027. All electronic invoicing must be processed through the Wide Area Workflow system, and final acceptance is contingent upon a joint site walkthrough and a comprehensive quality assurance demonstration.
Other Building Finishing Contractors

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 484220
New
Federal
Hazardous Materials Transport for Fire ExtinguishersThis subcontract involves providing specialized transportation and logistical handling for prime contractors operating at Marine Corps Air Station Iwakuni in Japan. The scope of work focuses on the secure loading, transport, and unloading of 81 pressurized wheeled Halotron I units. All operations must be conducted in strict accordance with Department of Transportation standards for compressed gases and general HAZMAT transportation regulations. The selected provider is required to utilize vehicles specifically equipped for the transport of pressurized vessels, including the use of appropriate securing straps. The logistical cycle includes delivering the units to a designated testing site and ensuring their safe return to MCAS Iwakuni. This effort falls under NAICS code 484220 and is managed under the authority of the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 23 days
View Details
NAICS: 811310
New
Federal
Hydrostatic Testing of Halotron I Fire ExtinguishersThis subcontract involves providing hydrostatic testing and visual examinations for 81 Amerex B674 Wheeled Halotron I cylinders at Marine Corps Air Station Iwakuni in Japan. The selected contractor will perform 100 percent inspections in strict accordance with NFPA 10, CGA C-1, CGA C-6, and DOT Title 49 CFR Part 180 standards. The scope of work requires the use of calibrated hydrostatic test pumps and expansion measurement tools to ensure all cylinders are properly marked and labeled. The final deliverable consists of 81 certified, tested, and labeled fire extinguishers. This project is managed under the Department of Defense for the Commanding Officer, falling under NAICS code 811310. The response deadline for this opportunity is November 29, 2026.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 23 days
View Details
NAICS: 811310
New
Federal
Hydrostatic Testing
Solicitation # M6740027Q0001
The Department of Defense, through the Commanding Officer at Marine Corps Air Station Iwakuni, is soliciting a firm fixed price contract for the hydrostatic testing of 81 Amerex B674 Wheeled Halotron I Fire Extinguishers. Performance is scheduled to take place between January 15, 2027, and March 15, 2027, either at Marine Corps Air Station Iwakuni or another mutually agreed upon location. All testing and visual examinations must strictly adhere to NFPA 10, CGA C-1, CGA C-6, and DOT Title 49 CFR Part 180 standards. The contractor is responsible for ensuring structural integrity through 100 percent inspection, maintaining specific expansion limits for low pressure cylinders, and providing detailed marking and labeling including the test date, pressure used, and the identity of the testing agency and individual. Interested offerors must submit their quotations by November 30, 2026, at 0800 JST, with all inquiries directed to the primary point of contact by November 16. Submissions must include a quotation with full pricing, a technical approach not exceeding three pages that details logistical plans and testing methodology, and a one page summary of relevant past performance from the last five years. Award will be granted to the responsible offeror deemed most advantageous to the government based on technical acceptability and price reasonableness. Administrative requirements include active SAM registration and electronic invoicing via the Wide Area WorkFlow system.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 23 days
View Details
NAICS: 541330
New
Federal
Notice of Intent to Sole Source Self Defense Test Ship Engineering and Technical Support Services
Solicitation # N6339426R3001
The Naval Surface Warfare Center, Port Hueneme Division intends to sole source a contract to AdvantEdge Technologies Inc. for engineering and technical support services for the Self Defense Test Ship (SDTS) platform, specifically the Ex Paul F Foster. This follow-on requirement focuses on the operation, maintenance, and repair of the SDTS and the Test Ship Remote Control System, which enables unmanned sea operations for high-risk live-fire test and evaluation events. These services support critical Department of Defense and Department of the Navy initiatives involving combat systems, ship self-defense systems, and various weapons and control systems. The government is pursuing a sole source procurement under FAR 6.103-1 to avoid mission delays and transition risks that would impact critical milestones. The anticipated period of performance is three years, consisting of a base year and two option years, to cover the platform's end-of-life phase. While the government intends to negotiate exclusively with AdvantEdge Technologies Inc., other responsible sources may submit capability statements for consideration within 15 days of the notice publication.
Engineering Services

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 611699
New
Federal
NOTICE OF INTENT TO SOLE SOURCE
Solicitation # M67400-27-N-0001
The Marine Corps Installations Pacific Regional Contracting Office intends to award a sole-source contract to Skydive Elsinore for commercial tactical training support services to benefit the 3d Reconnaissance Battalion, 3d Marine Division. This requirement, categorized under NAICS 611699 and PSC U013, focuses on Military Free Fall progression and sustainment training. The period of performance is scheduled from November 28 to December 18, 2026, in Lake Elsinore, California. The acquisition is being conducted as a FAR Part 12 acquisition under the Simplified Acquisition Threshold, with a total estimated value not expected to exceed that threshold. The scope of work requires the contractor to provide DoD Commercial Airlift Review Board approved aircraft configured for High-Altitude High-Opening and High-Altitude Low-Opening operations, capable of operating up to 14,000 feet AGL with a rear ramp exit. Facility requirements include at least 2,000 square feet of secure, climate-controlled classroom and storage space, shaded parachute packing areas with rubber matting, and on-site overnight lodging for up to 35 personnel. Additionally, the contractor must provide certified drop zone liaisons and FAA-certified parachute rigging and packing services. All operations must comply with Marine Corps Order 3120.11A and applicable federal hazardous material regulations.
All Other Miscellaneous Schools and Instruction

POSTED

4 days ago

DEADLINE

in 6 days
View Details
NAICS: 621910
New
Federal
Tactical Medical Evacuation and Safety SupportThe Tactical Medical Evacuation and Safety Support subcontract provides critical emergency medical transport and coordination for prime contractors supporting USMC Military Freefall training projects in Lake Elsinore. The scope of work includes the operation of an enclosed safety vehicle for transporting casualties to Level 3 Trauma Facilities and the coordination of helicopter medevac services. Additionally, the contractor is responsible for providing a safety boat and a qualified operator for drop zones located adjacent to water. This Department of Defense requirement, managed by the Commanding Officer under NAICS code 621910, demands on-call emergency medical transport and evacuation services to ensure personnel safety during high-risk training operations. Interested parties must note the response deadline of November 12, 2026.
Ambulance Services

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 721110
New
Federal
MFF Training Support Facility and LodgingThis subcontract for MFF Training Support Facility and Lodging, managed by the Department of Defense, provides essential infrastructure for prime contractors supporting USMC Military Freefall training projects in Lake Elsinore. The scope of work includes the provision of climate-controlled housing with overnight billeting for up to 35 personnel, as well as specialized parachute packing facilities. These facilities must feature a shaded packing area equipped with rubber matting and hook-and-line systems capable of accommodating twelve PS-2 parachutes. In addition to physical space, the contractor is responsible for providing 200mbps internet access and ongoing facility maintenance while ensuring full compliance with all local building and health codes. The primary deliverable is the continuous availability and upkeep of the lodging and specialized technical facilities to support training operations.
Hotels (except Casino Hotels) and Motels

POSTED

6 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332510
Awarded
Federal
Electronic Door Locks
Solicitation # FA5685-12-Q-0052

POSTED

about 14 years ago

CLOSED

about 14 years ago
View Details
NAICS: 332510
Awarded
Federal
Material Handling Equipment
Solicitation # SPM7LX-12-R-0047

POSTED

about 14 years ago

CLOSED

about 14 years ago
View Details
NAICS: 332510
Awarded
Federal
53--SHIM ASSORTMENT
Solicitation # SPE4A612Q2821

POSTED

about 14 years ago

CLOSED

about 14 years ago
View Details
NAICS: 332510
Awarded
Federal
20--MODIFICATIONKIT,MA
Solicitation # SPM7M212TB803

POSTED

about 14 years ago

CLOSED

about 14 years ago
View Details
NAICS: 332510
Awarded
Federal
25--CONTROLASSEMBLY, PUSH-PU
Solicitation # SPM7L212TJ621

POSTED

about 14 years ago

CLOSED

about 14 years ago
View Details
NAICS: 332510
Awarded
Federal
REPLACEMENT LOCKS AND HARDWARE FOR EXISTING SAFLOK SYSTEM
Solicitation # FA2521-12-Q-B184
FA2521 45 Cons Pk

POSTED

about 14 years ago

CLOSED

about 14 years ago
View Details
NAICS: 332510
Awarded
Federal
53--INSERT,SCREW THREAD
Solicitation # SPE4A012T1293

POSTED

about 14 years ago

CLOSED

about 14 years ago
View Details
NAICS: 332510
Awarded
Federal
NOAA Ship FERDINAND R. HASSLER Aft Control Station (ACS) Maneuvering and Mission Consoles
Solicitation # AB133M-12-RQ-1182
Department Of Commerce Noaa

POSTED

about 14 years ago

CLOSED

about 14 years ago
View Details
NAICS: 332510
Awarded
Federal
53--PLUG,MACHINE THREAD
Solicitation # SPE4A512TA588

POSTED

about 14 years ago

CLOSED

about 14 years ago
View Details
NAICS: 332510
Awarded
Federal
53--SPACER,PLATE
Solicitation # SPE4A012T1197

POSTED

about 14 years ago

CLOSED

about 14 years ago
View Details
NAICS: 332510
Awarded
Federal
53--SLIDE CARD DOOR LOCKS KABA ILCO
Solicitation # W911S112T0337

POSTED

about 14 years ago

CLOSED

about 14 years ago
View Details
NAICS: 332510
Awarded
Federal
53--SPACER,SLEEVE
Solicitation # SPE4A612TL306

POSTED

about 14 years ago

CLOSED

about 14 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS