Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Award Notice opportunity from Department Of Defense was posted on January 21, 2010. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

53--Miscellaneous Hardware

Awarded
W52H0909R0195Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510
New
DIBBS
Surface Plate Casting and ProductionThis subcontract for the Defense Logistics Agency involves the manufacture of a single finished surface plate for prime contractors. The scope of work includes metal casting and the development of specific tooling required to produce the component. All items must be packaged according to ASTM D3951 and the DLA Master List of Technical and Quality Requirements. The project is categorized under NAICS code 332510 and will be performed in Johnston, Iowa. To be eligible, the contractor must maintain NIST SP 800-171 compliance and complete a CMMC Level 2 Self-Assessment. Responses to the solicitation are due by November 16, 2026.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

in 9 days
NAICS: 332510
New
DIBBS
Loop Clamp Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 32 loop clamps, part number 7019031310, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all units meet strict technical specifications and adhere to specific military standards for marking, palletization, and packaging, specifically MIL-STD-129, RP001, and MIL-STD-2073-1E. Additionally, any hazardous items must be labeled in accordance with the Hazard Communication Standard 29 CFR 1910.1200. The final deliverables must be shipped to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. This procurement falls under NAICS code 332510 and is managed under the Department of Defense. The response deadline for this requirement is November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 9 days
NAICS: 332510
New
DIBBS
Hinge Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of five hinge assembly units, identified by NSN 5340014718518, for prime contractors under the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider must manufacture the hardware according to strict technical specifications, utilizing MIL-STD-1916 for sampling and quality inspection, while adhering to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Performance of the contract will take place in San Diego, California. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure CMMC Level 2 compliance. Additionally, the submission of Source Approval Request documentation is required. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332510.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Supply of Wire Strand Band (P/N 79/15VZ)This subcontract involves the supply of a high-precision wire strand band, part number 79/15VZ manufactured by Lex Products, LLC, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to military standards, specifically MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The contract specifies the delivery of one unit on a FOB Origin basis with a required delivery timeframe of five days. Performance is associated with NAICS code 332510 and is centered in Tampa, Florida, under the oversight of the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Supply of Machine Bolts (NSN 5306991144430)This subcontract involves the supply of 38 units of machine bolts, identified by NSN 5306991144430, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier must ensure all units meet specific material specifications and adhere to strict packaging and labeling standards, including ASTM D3951, MIL-STD-129, and RP001 DLA Packaging Requirements. Additionally, the contractor is required to comply with all DPAS rating requirements to ensure prioritized delivery. The completed order is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma located at Tinker AFB. This procurement falls under NAICS code 332510 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Manufacturing of Straight Headed Pins (NSN 5315-0119-17595)This subcontract involves the manufacture of straight headed pins under NSN 5315-0119-17595 for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The selected contractor must utilize precision machining and forming equipment to fabricate the pins and ensure strict adherence to quality control and sampling standards per MIL-STD-1916 or ASQ H1331. Compliance with the Buy American Act is mandatory, and the provider must hold either SAE AS9003 or ISO 9001 certification. The scope of work requires the delivery of five finished pins FOB Origin to the DLA Distribution DDSP New Cumberland Facility. This opportunity falls under NAICS code 332510 and was posted by the DLA Weapons Support ASC Supplier OEM Division. Interested parties must submit their responses by November 13, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Loop Clamp SupplierThis subcontract involves the supply of loop clamps for prime contractors working on DLA Weapons Support ASC projects under the Department of Defense. The selected supplier is responsible for manufacturing or sourcing a specific loop clamp, NSN 5340-01-612-5776, ensuring it adheres to the DLA Master List of Technical and Quality Requirements. All items must be packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. The contract requires the delivery of the completed hardware components to the designated destination point within 20 days of the award. Performance will take place in Lenoir, North Carolina, under NAICS code 332510. Interested parties must respond by the deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Mounting Bracket Fabrication (NSN 5340-01-386784-1)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the fabrication and supply of 28 mounting brackets identified as NSN 5340-01-386784-1. The project involves utilizing casting and forging processes with specialized tooling to produce units that meet Critical Application Item quality standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside. A critical requirement for the contractor is strict compliance with NIST SP 800-171 standards to ensure the proper safeguarding of covered defense information. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 9 days
NAICS: 332510
New
DIBBS
Supply of Butt Hinges (NSN 5340-01-710-4966)This subcontract involves the supply of 8 units of butt hinges, part number 148T8221U7, to support prime contractors under DLA supply contracts. The parts must be sourced according to Boeing specifications and undergo sampling in accordance with MIL-STD-1916 or ASQ H1331. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards. The contractor is required to maintain SAE AS9100 quality standards and possess FAA Airworthiness Approval. The final delivery of the marked and packaged units is designated as FOB Origin, with the destination being DLA Distribution DDSP New Cumberland. This procurement is managed by the DLA Weapons Support Land Supply Chain under the Department of Defense.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 9 days
NAICS: 332510
New
DIBBS
Needle Roller Bearing SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the delivery of 20 specialized needle roller bearings, identified by NSN 3110-01-248-7841. The bearings must be manufactured in the United States, its outlying areas, or Canada to comply with specific restrictions on the acquisition of ball and roller bearings. All components must adhere to the technical and test requirements outlined in the associated technical drawings. The contractor is required to maintain compliance with CMMC Level 2 and CDI requirements. This procurement falls under NAICS code 332510 and supports prime contractors fulfilling DLA supply contracts. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Supply of Solid Rivets (NSN 5320-01-057-3176)This subcontract involves the supply of 4,290 solid rivets conforming to NSN 5320-01-057-3176 for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The project requires strict adherence to MIL-STD-129 for all packaging and marking, with logistics managed via First Destination Transportation. Performance will take place at Tinker AFB. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332510. Interested parties must respond by November 13, 2026, to fulfill the requirements of the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Access Door Hinge SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, requires the supply of 14 specialized access door hinges identified by NSN 5340-01-485-6825. The contractor is responsible for manufacturing or sourcing these components, with the possibility of utilizing additive manufacturing provided that ESA approval is obtained. All deliverables must be packaged according to ASTM D3951 standards for non-hazardous materials and palletized following RP001 guidelines. The place of performance for this contract is located in Cherry Point, and the procurement falls under NAICS code 332510.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

in 6 days

AI Contract Overview

Show more

This contract, issued by the Department of Defense under the Hq US Army Tacom, is a 100 percent small business set aside for the procurement of specialized aluminum mounting hardware for the Mortar Fire Control System for Mortars. The required items include three types of mounting plates and one mounting bracket, all machined from 6061 aluminum alloy with specific dimensions, drilled holes, and chromate chemical film finishes in CARC green. The government intends to award firm-fixed-price, three-year indefinite delivery indefinite quantity contracts. While exact quantities are not yet determined, guaranteed minimums will be provided in the solicitation. Delivery is established as FOB Destination. All solicitation activities and amendments are handled electronically, requiring interested vendors to monitor the designated internet portal to ensure proposal responsiveness.

General Info

Agency

Department Of Defense → W4GG Hq US Army Tacom

Contract Value

$0

NAICS

332510 - Hardware Manufacturing

Place of Performance

MI

Set-Aside

NONE

Awardee

ADVANCED LASER MACHINING, INC.,600 CASHMAN DR,CHIPPEWA FALLS,WI,54729-4118

Award Issued Date

Documents

8
OCTET-STREAM
ZIP
OCTET-STREAM
ZIP
OCTET-STREAM
ZIP
OCTET-STREAM
ZIP

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

7 updates
PhaseAwarded
Posted

Presolicitation

Notice updated

Response deadline changed from May 22, 2009 to May 26, 2009. The notice description changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Deadline changed

Response deadline changed from May 26, 2009 to May 29, 2009.

Notice updated

Notice details unchanged. Attachments may have changed.

Type Changed

Presolicitation → Solicitation

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W4GG Hq US Army Tacom
ContactsNo contacts available
OfficeDETROIT ARSENAL, MI, 48397-5000, USA
Organization / AgencyDepartment Of Defense → W4GG Hq US Army Tacom
Office AddressDETROIT ARSENAL, MI, 48397-5000, USA
ContactsNo contact information available

Full Description

Show more
The items to procure: (a) Plate, Mounting, NSN 5340-01-503-2007, PN 12987833, machined from aluminum alloy, plate, .25 STK, 6061-T651 and is 4.515 inches X 4.895 inches in size with drilled holes. Finish is chromate chemical film and carc green color applied; (b) Plate, Mounting, NSN 5340-01-539-6128, PN 12987823, machined from aluminum alloy, plate, .25 thick, 6061-T6. The part is 6.42 inches X 6.27 inches and has approx 16 drilled holes. Finish is chromate and carc paint; (c) Plate, Mounting, NSN 5340-01-503-2005, PN 12992749, machined from aluminum alloy, plate .25 STK, 6061-T651 and is 4.515 inches X 4.895 inches in size with drilled holes. Finish is chromate chemical film an dcarc green color applied; (d) Bracket, Mount, NSN 5340-01-539-0399, PN 12987824, machined from aluminum alloy, extruded, 6061 and includes (4) holes drilled 0.360 in, (4) countersunk dia.0.547 in, and (4) helical coil inserts-MS122121. The part is 6.27 in X 2.27 in X 2.22 in with chromate chemical film finish, plus carc paint, color green. Items are for use on the Mortar Fire Control System for Mortars. FOB is Destination. Exact quantities are not known at this time. Award of FFP, 3 year IDIQ contracts are contemplated. Guaranteed minimum quantities will be specified in the solicitation. Estimated issue date is 20 Apr 09. This solicitation will be issued electronically in accordance with FAR 4.502 and 5.102, therefore, hardcopies will not be provided. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the internet: https://aais.ria.army.mil/aais/SOLINFO/index.htm. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidders mailing list. It is therefore incumbent upon any interested parties to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for bid opening/receipt of proposals may render your bid or proposal nonresponsive and result in the rejection of same. This solicitation is 100% small business set aside.

More opportunities from Department Of Defense → W4GG Hq US Army Tacom

Same awarding agency

NAICS: 541715
Federal
Ground Vehicle System Center (GVSC) Commercial Solutions Opening (CSO)
Solicitation # W912CH-24-S-0002
The United States Army Combat Capabilities Development Command Ground Vehicle Systems Center (GVSC) is utilizing a Commercial Solutions Opening (CSO) under solicitation W912CH-24-S-0002 to accelerate the delivery and sustainment of innovative commercial technologies for ground vehicle systems. This multi-phased competitive process, authorized under 10 U.S.C. 3458, extends through 2029 and aims to support Army modernization priorities across various technology focus areas, including power and mobility, autonomous systems, survivability, cyber engineering, and human-machine integration. The CSO is designed to identify solutions that prevent obsolescence and ensure future dominance in the ground domain, with specific interests ranging from high-performance compute solutions and AI-driven cybersecurity to advanced power systems up to 1.5MW and unified combat teaming architectures. The acquisition process follows a structured sequence consisting of solution briefs, presentations, and requests for commercial solution proposals. Awards may take the form of FAR Part 12 commercial procedures, transaction agreements under 10 U.S.C. 4022, or cooperative agreements under 31 U.S.C. 6305, typically resulting in fixed-price contracts. Proposals are evaluated based on technical approach, the realism of the performance schedule, and price fairness. To be eligible for award, companies must be registered in the System for Award Management (SAM) with a Unique Entity ID and utilize the Wide Area Work Flow for invoicing. While the solicitation is ongoing and frequently updated via amendments to add new Areas of Interest, all submissions must remain unclassified.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 336992
Federal
Pilot Production Contract
Solicitation # W912CH-26-R-A029
The U.S. Army is soliciting a sole-source pilot production contract under FAR 6.302-1(ii) and (iii)(A) to General Dynamics Land Systems Inc. with Cage Code 7W356, as the only responsible source capable of meeting the agency’s requirements for future Abrams vehicle production in the M1E3 configuration. This three-year hybrid cost-type contract is designed to enable the transition into full-scale production and will be awarded without competitive bidding due to the unique technical and operational specifications only GDLS can fulfill. While other sources may submit capability statements, proposals, or quotations, they are not expected to satisfy the critical requirements, making this a non-competitive acquisition. The contract will be managed by the U.S. Army Contracting Command at the Detroit Arsenal in Michigan, with performance also centered at this location. The solicitation number is W912CH-26-R-A029, posted on July 9, 2026, and classified under NAICS code 336992 for other defense-related manufacturing. Primary contact for inquiries is Contract Specialist Nicole Young, with Contracting Officer John Finn III also available for coordination. The contract aims to secure the industrial base capacity and technological continuity required to sustain the Army’s heavy armored modernization program through direct support to the M1E3 Abrams production line.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
Technical Project Management and Systems Engineering SupportThe contract entails providing technical project management and systems engineering support for integrated technology development initiatives, with a focus on organizing project structures, assembling qualified technical staff, defining management methodologies, and establishing detailed milestone plans to ensure timely and effective execution. The efforts are aligned with the U.S. Army TACOM's objectives, requiring close coordination across technical domains to deliver advanced capabilities under a structured development lifecycle. Performance is centered in Warren, with work directed toward advancing defense-related technological systems through disciplined planning and execution. This subcontract falls under NAICS code 541611, indicating it is categorized as management consulting services, emphasizing the need for high-level planning and oversight rather than direct manufacturing or construction. The solicitation was posted in May 2026 under the Department of Defense, signaling an upcoming procurement opportunity for contractors with proven experience in defense technology integration. While specific funding or award details are not disclosed, the requirement underscores the importance of robust project governance, resource allocation, and the ability to meet defined technical milestones in a federal acquisition environment.
Administrative Management and General Management Consulting Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 332999
Federal
Advanced Manufacturing for Ground SystemsThe contract titled Advanced Manufacturing for Ground Systems is a subcontract focused on applying cutting-edge manufacturing technologies such as additive manufacturing, digital twins, and smart factory systems to the production and sustainment of components for military ground vehicles. It is managed by the U.S. Army Tank Automotive Command under the Department of Defense with the NAICS code 332999 indicating it falls under other miscellaneous manufacturing. Performance of the work is designated to occur in Warren, where the technical execution of advanced manufacturing processes will support critical defense capabilities. The contract was posted on May 5, 2026, and is intended to leverage innovation in production methods to enhance efficiency, reliability, and readiness of ground vehicle systems for military use.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 334511
Federal
Vehicle Electronics and Architecture DesignThe contract entails the design and development of advanced electronics, communication networks, and vehicle-wide computing architectures for integrated ground systems, with a strong emphasis on cyber-hardened designs to ensure resilience against modern threats. This work focuses on creating next-generation electronic systems that support mission-critical operations across military ground platforms, integrating robust computing frameworks capable of handling complex data processing and secure communications in austere environments. The scope requires cutting-edge engineering expertise in embedded systems, network security, and systems architecture to deliver solutions that are both scalable and survivable under combat conditions. The contract is classified as a subcontract under the NAICS code 334511, which pertains to electronic component and product manufacturing, and is administered by the U.S. Army Tank Automotive Command under the Department of Defense. Performance is slated to occur in Warren, Michigan, a key hub for military vehicle engineering and development. Although specific funding or award details are not outlined, the posting date of May 5, 2026, indicates a forward-looking procurement aimed at sustaining technological superiority in future armored and tactical vehicle platforms. The project demands adherence to stringent defense standards, and successful offerors must possess proven experience in secure system integration, electronic warfare readiness, and compliance with DoD cybersecurity protocols.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Autonomous Ground Vehicle Systems IntegrationThe contract pertains to the development and integration of autonomous navigation, perception, and decision-making systems for unmanned and semi-autonomous military ground vehicles, targeting advanced capabilities to operate in complex battlefield environments. The work involves creating software and hardware architectures capable of real-time environmental sensing, path planning, obstacle avoidance, and tactical decision-making without sustained human intervention, with a focus on reliability, scalability, and interoperability with existing military platforms. The systems must meet rigorous performance standards under adverse conditions, including contested electromagnetic environments and rough terrains, and are intended for deployment across a range of ground vehicle types used by the U.S. Army. This is a subcontract under the Department of Defense, specifically managed by the U.S. Army TACOM headquarters, with the primary place of performance located in Warren. The work falls under NAICS code 541330, indicating it is centered on engineering services, particularly those involving systems integration and advanced robotics development. The contract was posted on May 5, 2026, and while no set-aside designation or point of contact is provided, the nature of the work suggests high confidentiality and compliance with defense contracting requirements, including secure data handling, export control regulations, and potential requirements for personnel clearance. The effort aims to enhance the operational autonomy of future ground forces through cutting-edge AI and sensing technologies integrated into militarized platforms.
Engineering Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 335912
Federal
Advanced Power System Development for Ground VehiclesThe contract involves the design and development of high-capacity power systems capable of delivering up to 1.5 megawatts for next-generation military ground vehicles, with a focus on hybrid, electric, or alternative energy propulsion technologies. These systems must meet rigorous performance, durability, and operational demands specific to modern battlefield environments, ensuring enhanced mobility, reduced logistical footprints, and improved energy efficiency for armored and tactical platforms. The work is classified as a subcontract under the North American Industry Classification System code 335912, indicating specialized electrical equipment manufacturing for defense applications. The project is administered by the U.S. Army Tank-Automotive Command under the Department of Defense, with performance centered in Warren, Michigan, a key hub for military vehicle innovation and engineering. While no solicitation number or set-aside details are provided, the posting date of May 5, 2026, suggests this is a forward-looking opportunity targeting advanced defense contractors with proven expertise in high-power energy systems. The focus on next-generation propulsion implies the need for cutting-edge integration of battery technologies, power electronics, thermal management, and energy recovery systems tailored to the unique constraints of armored vehicles.
Primary Battery Manufacturing

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 712110
Federal
Vehicle Recompete: LABOR ORDERING PERIOD 1 — INDEFINITE DELIVERY / INDEFINITE QUANTITY W56HZV22RL017This Indefinite Delivery Indefinite Quantity contract, managed by the Department of the Army under solicitation W56HZV22RL017, focuses on museum exhibit fabrication and installation services. The current ordering period is set to expire on July 29, 2027. There are currently ten active task orders with a combined total value of 5,034,841.89 dollars, and the contract is considered likely to be recompeted. Six companies hold awards under this vehicle, with Building Four Fabrication LLC emerging as the primary contractor, holding over 4.7 million dollars across three orders, including significant projects for materials and the Fort Bliss Museum. Other participants include Capitol Exhibit Services, Blair Inc, Color-Ad, Explus, and Formations Inc. The procurement falls under NAICS code 712110 and is coordinated through the Department of Defense.
Museums

POSTED

9 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332510
Awarded
Federal
BUMPER
Solicitation # SPM5A910R0010

POSTED

almost 17 years ago

CLOSED

over 16 years ago
View Details
NAICS: 332510
Awarded
Federal
C130 Ice Detectors
Solicitation # HSCG38-10-Q-300013
Aviation Logistics Center (ALC)(00038)

POSTED

almost 17 years ago

CLOSED

almost 17 years ago
View Details
NAICS: 332510
Awarded
Federal
53--Miscellaneous Hardware
Solicitation # W58RGZ09R0532
W6QK Acc-Rsa

POSTED

almost 17 years ago

CLOSED

almost 17 years ago
View Details
NAICS: 332510
Awarded
Federal
5365-01-383-2007 Spacer slleve
Solicitation # SPM4A610R0037

POSTED

almost 17 years ago

CLOSED

almost 17 years ago
View Details
NAICS: 332510
Awarded
Federal
ANODE, CORROSION PREVENTIVE, B2N - LITTORAL COMBAT SHIP, FLIGHT 0
Solicitation # SPM4A610R0327

POSTED

almost 17 years ago

CLOSED

over 16 years ago
View Details
NAICS: 332510
Awarded
Federal
53--Locks
Solicitation # VA-246-10-RQ-0123

POSTED

almost 17 years ago

CLOSED

almost 17 years ago
View Details
NAICS: 332510
Awarded
Federal
Cover, Access
Solicitation # spm5l210r0006

POSTED

almost 17 years ago

CLOSED

over 16 years ago
View Details
NAICS: 332510
Awarded
Federal
40--Fittings for Rope, Cable, and Chain
Solicitation # SPRRA109R0025
Al DLA Aviation At Huntsville

POSTED

almost 17 years ago

CLOSED

almost 17 years ago
View Details
NAICS: 332510
Awarded
Federal
Padlocks, Keys, Cylinders and Deadbolts
Solicitation # AG-03R6-S-09-0131
Lolo National Forest

POSTED

almost 17 years ago

CLOSED

almost 17 years ago
View Details
NAICS: 332510
Awarded
Federal
Magnetic Strip
Solicitation # QSDLAA-Y6-09-0834-SQb
Gsa/fas Region 7 Acqusition Center

POSTED

almost 17 years ago

CLOSED

almost 17 years ago
View Details
NAICS: 332510
Awarded
Federal
53--Miscellaneous Hardware
Solicitation # W58RGZ10T0048
W6QK Acc-Rsa

POSTED

almost 17 years ago

CLOSED

almost 17 years ago
View Details
NAICS: 332510
Awarded
Federal
53--Hardware for ships ladders,airtight doors and hatches.
Solicitation # N0024410T0063
Navsup Flt Logistics Ctr San Diego

POSTED

almost 17 years ago

CLOSED

almost 17 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS