Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

53--RETAINER,PACKING

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This is a predicted recompete opportunity for the procurement of packing retainers under NSN 5330014446602, managed by the DLA Land and Maritime. The current contract, held by All-Safe Inc with a value of 90,000 dollars, is set to expire on September 3, 2026. The procurement is classified as a firm fixed price agreement and was previously competed under SAP, with a medium confidence level that it will be recompete. The upcoming solicitation is an RFQ for a quantity of three units to be delivered to DLA Distribution within 168 days after order. All responsible sources are invited to submit electronic quotes, as hard copies and specific technical drawings are not available. The opportunity falls under NAICS code 339991 and is coordinated through the Department of Defense office located in Columbus, Ohio.

General Info

DLA Land and Maritime RFQ for packing retainers, firm fixed price, three units.

Agency

Department Of Defense → DLA Land And Maritime

NAICS

339991 - Gasket, Packing, and Sealing Device Manufacturing

Place of Performance

OH, 430269474, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMar 3

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Cynthia Korteweg

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: SPE7M225P4375 Incumbent: ALL-SAFE INC Contract Value: $90,000 Potential End Date: 2026-09-03T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 55/100)
Proposed procurement for NSN 5330014446602 RETAINER,PACKING: Line 0001 Qty 3 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0168 DAYS ADO Approved source is 10941 250-6301006-316. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

Hatch Seal Supply (NSN 5330-00-553-0148)This subcontract involves the procurement of eight hatch seals under NSN 5330-00-553-0148 for the Department of Defense, specifically supporting DLA Weapons Support projects. The selected provider must manufacture or source these units in strict accordance with quality conformance RQ006 and zero-based sampling plans. To ensure compliance, the contractor must adhere to the Buy American Act and Berry Amendment restrictions, and the use of additive manufacturing is strictly prohibited. Administrative and security requirements include mandatory CMMC Level 2 certification and approval through the US/Canada Joint Certification Program. The contract falls under NAICS code 339991 and is managed by the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Interested parties must meet the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Supply of Gaskets (NSN 5330-01-537-2389)This subcontract, issued by the DLA Weapons Support Nuclear Reactor Program under the Department of Defense, requires the manufacture or procurement of 83 gaskets meeting NSN 5330015372389 specifications. The contract is a total small business set-aside under NAICS code 339991, with performance taking place in New Cumberland. All materials must comply with DFARS 252.225-7001 Buy American requirements and maintain a shelf life of 120 months. The contractor is responsible for delivering the 83 individually packaged gaskets to a designated destination. Packaging must adhere to MIL-STD-129 standards, utilizing medium-duty, waterproof, greaseproof, and opaque bags. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

Gasket Supply (NSN 5330016539601)This subcontract involves the supply of four gaskets matching NSN 5330016539601 and Gorman-Rupp part number 12356G for prime contractors supporting DLA supply contracts. The Department of Defense requires strict adherence to RP001 packaging, MIL-STD-129 marking, and MIL-STD-2073-1E standards. Additionally, the provider must comply with the Buy American Act and the Berry Amendment, and the use of additive manufacturing is explicitly prohibited. The contract specifies a delivery timeline of 20 days with shipping terms set as FOB Destination. Performance will take place in APO 09321 under NAICS code 339991. Interested parties must respond by November 9, 2026, to meet the requirements set by the DLA Weapons Support Land Supplier Operations Vehicle Support agency.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-T-1778

This solicitation, issued by the DLA Weapons Support Maritime Supply Chain, is a small business set-aside for the procurement of 25 spring-loaded shaft seal assemblies under NSN 4320-01-140-4084. The requirement is categorized under NAICS code 339991, with a delivery timeframe of 116 days after order and a designated delivery location in Jacksonville, Florida. The government specifies that items must be delivered FOB Destination and prohibits the use of additive manufacturing for the production of these components. The contract mandates strict adherence to DLA packaging and quality standards, specifically referencing RP001 for palletization, ASTM D3951 for general packaging, and MIL-STD-129 for marking and labeling. Technical data associated with this item is subject to export control under ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of hexavalent chromium. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-3080

Solicitation SPE7L1-27-T-3080 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 27 O-rings, identified by NSN 5331-00-851-1419. The required delivery date is August 19, 2027, with a delivery timeline of 282 days after award. Shipping is designated as FOB Origin, with the final destination being the DLA Distribution Depot at Tinker AFB, Oklahoma. Inspection and acceptance will occur at the destination, with acceptance based on zero non-conformances in the sample lot. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and prohibits the use of class I ozone-depleting chemicals. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, specifically requiring items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with CMMC Level 2 and DFARS safeguarding of covered defense information. Additionally, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Price evaluation preferences are available for HUBZone small business concerns.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-3088

Solicitation SPE7L1-27-T-3088 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one gasket, identified by NSN 5330-01-702-7866. The required delivery is 20 days after receipt of order, with an original required delivery date of May 5, 2026. The place of performance is Port Hueneme, California, and the shipping terms are FOB Origin. Quotations must be submitted via the DIBBS portal by November 9, 2026. The contract mandates strict material and quality standards, including a total prohibition on the use of asbestos and Class I ozone-depleting chemicals. Packaging must comply with MIL-STD-2073-1E and RP001, specifically requiring the item to be sealed in a medium duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1 to protect against ultraviolet rays. Marking must adhere to MIL-STD-129. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The contract incorporates various DFARS and FAR clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity standards such as DFARS 252.204-7012 and CMMC Level 2 requirements. Offerors must maintain current representations and certifications in the System for Award Management (SAM).

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

SEAL, PLAIN ENCASED

Solicitation # SPE7L3-27-T-1579

Solicitation SPE7L3-27-T-1579 is a request for quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of seven plain encased seals, identified by NSN 5330-00-821-2374 and part number CB124-23. This is designated as a critical application item, and the materials must be free of asbestos as defined in FED-STD-313. The delivery requirement is 20 days after receipt of order, with a required delivery date of November 2, 2026. Shipping is FOB Origin, and the items are to be delivered to the German Armed Forces Command USA in Dulles, Virginia. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the risk of ultraviolet deterioration, the seals must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Technical and quality requirements are further governed by DLA master list items RP001 and RQ011. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and basic safeguarding of covered contractor information systems. Quotations are due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L1-27-U-0067

Solicitation SPE7L1-27-U-0067 is a total small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of gaskets, NSN 5330-01-288-8989, part number 17DS39. This is a unilateral fixed-price Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and an estimated annual quantity of 68 units. Quotations must be submitted via the DLA Internet Bid Board System by October 29, 2026. The required delivery timeframe is 88 days after order, with inspection and acceptance occurring at the destination. Technical specifications strictly prohibit the use of asbestos as defined in FED-STD-313. The contractor must adhere to several military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-130N for identification marking of U.S. military property. Palletization must comply with DLA packaging requirements RP001. Invoicing and payment processing are to be handled electronically through Wide Area WorkFlow. Award evaluation will be based on price and technical acceptability, and the procurement may be eligible for automated award.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

PACKING, PREFORMED

Solicitation # SPE7L3-27-T-1032

Solicitation SPE7L3-27-T-1032 is issued by the Defense Logistics Agency for the procurement of four units of preformed packing, identified by NSN 5330-01-176-5897. This is a Foreign Military Sales requirement for Taiwan, with a required delivery date of September 29, 2026, and shipping terms designated as FOB Origin. To be eligible for award, offerors must possess an approved US/Canada Joint Certification Program certification. The procurement may be subject to automated award and includes a price evaluation preference for SBA-certified HUBZone small business concerns. The contract mandates strict material and quality standards, including the total prohibition of asbestos and class I ozone-depleting chemicals. Mercury is prohibited unless used in specific functional capacities approved by NAVSEA. Due to potential ultraviolet degradation, the items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. Marking and packaging must comply with MIL-STD-129, MIL-STD-130N, and MIL-STD-2073-1E. Inspection and acceptance will occur at the point of origin. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

SEAL, NONMETALLIC SPECI

Solicitation # SPE7L3-27-T-1611

Solicitation SPE7L3-27-T-1611 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of 247 nonmetallic special shaped section seals, identified by NSN 5330-01-052-0009. The required delivery date is March 22, 2027, with a delivery lead time of 132 days after order. The contract is subject to destination inspection and acceptance, and the manufacturer's inspection system must comply with ISO 9001:2015 or an equivalent standard. Packaging and marking must adhere to MIL-STD-129, MIL-STD-2073-1E, and Special Packaging Instruction SPI P11741209 Rev B. This procurement includes strict regulatory requirements, including export controls under ITAR and EAR, and requires contractors to have an approved US/Canada Joint Certification Program certification to access technical data. Cybersecurity compliance is mandatory per DFARS 252.204-7012 and NIST SP 800-171. Additionally, the contract enforces domestic sourcing restrictions through the Buy American Act and the Berry Amendment. Offers produced using additive manufacturing are ineligible for award. Evaluation will be based on price, with a specific preference for HUBZone small business concerns. Invoicing must be processed electronically via the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

SHIELDING GASKET, ELECT

Solicitation # SPE7M1-27-U-0324

Solicitation SPE7M1-27-U-0324 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of electronic shielding gaskets, identified by NSN 5999015297317. This procurement may result in a unilateral Indefinite Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The estimated annual demand is 69 units, with a guaranteed minimum contract quantity of 10 units and a minimum delivery order quantity of 34 units. Quotes must be submitted electronically via the DLA Internet Bid Board System by October 21, 2026. The contract requires delivery within 100 days, with inspection and acceptance occurring at the destination. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, and any hazardous materials must comply with the Hazard Communication Standard. Payment will be processed electronically through the Wide Area WorkFlow system. Award will be granted to a responsible offeror based on the price quoted for the estimated annual demand. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is mandatory.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L1-27-U-0070

Solicitation SPE7L1-27-U-0070 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of O-rings, specifically NSN 5331014778235. The government is seeking an estimated annual quantity of 34 units under a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000.00 dollars. Quotations must be submitted via the DLA Internet Bid Board System by October 29, 2026. The contract specifies delivery within 133 days, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The items are designated as critical application items and must adhere to strict material and packaging standards. Specifically, the use of asbestos and the intentional addition of mercury are prohibited. Due to potential deterioration from ultraviolet rays, the O-rings must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. General packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively. Contractors are required to use the Wide Area WorkFlow system for invoicing and must comply with various FAR and DFARS clauses, including those regarding cybersecurity, the Buy American Act, and the Berry Amendment.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

Pressure Switch Component SupplierThe Pressure Switch Component Supplier subcontract involves providing essential raw materials and sub-components to prime contractors manufacturing pressure switches for DLA Land and Maritime. The scope of work includes the delivery of high-grade alloys, specialized polymers, conductive materials, springs, electronic contacts, and specialized seals. All supplied materials must adhere to strict performance tolerances and specific coating requirements to ensure operational integrity. To maintain quality standards, the supplier is required to provide comprehensive material certifications and Certificates of Conformance for all deliveries. The contract falls under NAICS code 335999 and supports the Department of Defense. Interested parties should note the response deadline of November 4, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Pressure Switch Manufacturer (NSN 5930-01-324-5328)This subcontract involves the manufacture and supply of pressure switches, specifically NSN 5930-01-324-5328, for prime contractors supporting DLA Land and Maritime hardware. The selected provider must utilize precision machining and assembly equipment to fabricate these switches in strict accordance with military specifications or approved technical data. A critical requirement of the contract is the submission of application packages through the DLA Weapons Support Alternate Offer/Source Approval Request Program to obtain AMC 3C approval. This opportunity falls under NAICS code 335313 and is managed by the Department of Defense.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Switch, Pressure

Solicitation # CM26239122

DLA Land and Maritime, specifically the FMS Tactical LTC Team at DLA Weapons Support - Columbus, is conducting a sources-sought market survey for the procurement of Pressure Switches under NSN 5930-01-324-5328. The agency is seeking information from potential vendors regarding delivery timelines, quantity capabilities, and pricing structures to determine the feasibility of an Indefinite Delivery Contract with a proposed three-year base period and subsequent one-year option periods. The government is specifically looking for data on commercial availability and is requesting drawings or bills of materials to identify similarities between commercial and military equivalents. The current approved source for this item is Cameron Energy Services Corp, identified by CAGE code 05991 with multiple associated part numbers. Due to the AMC 3C designation, this part requires engineering source approval to maintain quality, as the approved sources retain essential technical data and manufacturing knowledge. Other companies wishing to be qualified as approved sources must submit an application package through the DLA Weapons Support Alternate Offer/Source Approval Request Program to demonstrate their ability to manufacture the product to the same or better quality than the original equipment manufacturer. Responses should be directed to Contract Specialist Caitlin Ferry by the deadline of November 4, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

INSULATING COMPOUND,ELECTRICAL

Solicitation # CM26161009

This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

HEADSET-MICROPHONE : NSN 5965-01-204-8505

Solicitation # SPE7MX26RX089

This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7MX26RX102

DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.

POSTED

DEADLINE

MULTI NSN DIESEL ENGINE

Solicitation # CM26259595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

SEAL, PLAIN 6649

Solicitation # SPE7MX26RX033

This solicitation seeks to establish an Indefinite Quantity Contract for stock replenishment of plain seals to support military depots. Managed by DLA Weapons Support in Columbus, Ohio, the requirement focuses on NSN 5330-00-631-6649 with an estimated annual demand of 15,721 units. The procurement is designated as a Total Small Business Set-Aside and will be conducted using other than full and open competition procedures, as the items are available from a limited number of approved sources including The Timken Corporation, Randall Mfg Co Inc, Basic Rubber and Plastics Co, and PDI Ground Support Systems, Inc. The solicitation is expected to be available around October 20, 2026, with a response deadline of November 5, 2026. While price is a significant factor, the final award decision will be based on a combination of price, past performance, and delivery. Interested responsible sources may submit quotes via the DIBBS portal, though drawings and specifications will not be provided through that system.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

53--RETAINER,PACKING

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

53--SEAL,CONDUCTIVE

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

53--SEAL RING,METAL

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

53--SEAL ASSY,MAGNETIC

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

53--SEAL,INFLATABLE

POSTED

over 1 year ago

DEADLINE

53--SEAL,NONMETALLIC SP

Solicitation # SPE7LX25U4307

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--SEAL,PLAIN ENCASED

Solicitation # SPE7L125T161V

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--SEAL,NONMETALLIC SP

Solicitation # SPE7LX25U4328

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7LX25U4308

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--SEAL,PLAIN ENCASED

Solicitation # SPE7LX25U4299

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7LX25U4296

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7L325T8712

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS