Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on May 4, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

53--SEAL,PLAIN ENCASED

Awarded
SPE7L121T093LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722
New
DIBBS
Supplier of Flat Washers (NSN 5310-01-587-6238)This subcontract involves the supply of flat washers for prime contractors supporting the Department of Defense DLA Weapons Support Aviation Supply Chain. The supplier is responsible for manufacturing or sourcing washers according to NSN 5310-01-587-6238 and DLA Master List requirements, with a strict prohibition on the use of additive manufacturing. Quality assurance must be conducted via sampling per MIL-STD-1916 or ASQ H1331, and all shipments must be packaged and labeled in accordance with ASTM D3951 and MIL-STD-129. The contract requires the delivery of two flat washers FOB Origin to Edinburgh, Indiana. Interested parties must respond by November 9, 2026, for this requirement categorized under NAICS code 332722.
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Supply of Grooved Clamp Couplings (NSN 5342-01-149-1374)This subcontract involves the supply of 739 grooved clamp couplings (NSN 5342-01-149-1374) for prime contractors under the Department of Defense, specifically the DLA Weapons Support ASC. The contractor is responsible for manufacturing or sourcing the units in accordance with TDP Rev A Gen 1 and Basic Drawing NR 82918 458-50061, with performance taking place at Tinker AFB. Strict quality and regulatory standards apply to this engagement, including sampling per MIL-STD-1916 or ASQ H1331 and packaging requirements following MIL-STD-2073-1E and MIL-STD-129. Additionally, the provider must maintain CMMC Level 2 certification and ensure full compliance with all applicable Export Control regulations.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Precision Machine Bolt ManufacturerThis subcontract involves the manufacture of 456 machine bolts under NSN 5306001801934 for prime contractors supporting DLA Weapons Support ASC projects. The selected manufacturer must fabricate the bolts to exact NSN specifications and the most current part standard revisions, with a strict prohibition on the use of additive manufacturing. The contractor is required to utilize precision machining equipment and maintain a quality system that complies with either SAE AS9003 or ISO 9001 standards. Performance will take place in San Diego, California, with the final deliverable being 456 finished machine bolts that meet all established technical specifications.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Manufacture and Supply of Slotted Nut Locking DevicesThis subcontract involves the manufacture and supply of three precision-machined slotted nut locking devices for the Department of Defense, specifically supporting DLA Weapons Support Land Supply Chain projects. The contractor is responsible for fabricating the devices according to NSN 5340-01-546-6110 technical specifications using CNC lathes and materials that comply with the Buy American Act. Additionally, the contractor must perform quality control inspections and marking in accordance with MIL-STD-129. The project is designated as a Total Small Business Set-Aside under NAICS code 332722, with the place of performance located in Portsmouth, New Hampshire. Interested parties must have responded by the deadline of November 12, 2026, to provide these specialized components to the prime contractors.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 10 days
NAICS: 332722
New
DIBBS
Supply of Set Screws (NSN 5305-01-363-6074)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the procurement or manufacture of a specific set screw identified by NSN 5305-01-363-6074. The contractor is responsible for delivering one unit that meets all technical specifications, ensuring it is packaged according to RP001 DLA Packaging Requirements and marked and labeled in compliance with MIL-STD 129. Additionally, a Safety Data Sheet must be submitted for any hazardous materials associated with the item. The performance of this contract will take place in Fort Campbell, Kentucky, under NAICS code 332722. Interested parties must submit their responses by November 9, 2026, to support prime contractors fulfilling DLA supply contracts.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Supply of Self-Locking Hexagonal Nuts (NSN 5310015683086)This subcontract through the Department of Defense DLA Weapons Support ASC Commodities Division involves the supply of four self-locking hexagonal nuts, specifically NSN 5310015683086 and Huck International part number BMN4122A-9. The components must be free of hexavalent chromium and comply with the Buy American Act. Delivery is designated for Tinker AFB in Oklahoma. Strict adherence to technical standards is required, with packaging following ASTM D3951 and RP001 and marking according to MIL-STD-129. Quality assurance will be verified via MIL-STD-1916 or ASQ H1331. The solicitation was posted on November 1, 2026, with a response deadline of November 9, 2026, under NAICS code 332722.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Manufacturer of Sheet Spring Nuts (NSN 5310-01-044-2812)This subcontract involves the fabrication and supply of 1,421 sheet spring nuts under NSN 5310-01-044-2812 for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to utilize precision metal forming and stamping processes to produce the units, which will be delivered FOB Origin to San Diego. All deliverables must strictly adhere to MIL-STD-2073-1E packaging and MIL-STD-129 marking standards. The contractor must maintain rigorous compliance with the Buy American Act and the Berry Amendment. Essential certifications and security requirements include JCP certification, ITAR/EAR export approvals, and adherence to DFARS 252.204-7012 and CMMC Level 2 cybersecurity standards. This project falls under NAICS code 332722 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Supply of Machine Screws (NSN 5305-01-517-2795)This subcontract involves the supply of machine screws for prime contractors supporting DLA Weapons Support ASC projects for the Michigan Army National Guard. The required hardware must strictly adhere to NSN 5305-01-517-2795 and Part Number 82-2034-0150, while maintaining compliance with the Buy American Act and quality assurance standards MIL-STD-1916 or ASQ H1331. The scope of work requires the delivery of two units of machine screws FOB Origin to Grayling, Michigan. This procurement is managed under NAICS code 332722 for the Department of Defense, with a response deadline set for November 9, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Manufacturer of Hook Bolt (NSN 5306016083430)This subcontract involves the precision machining and fabrication of one Hook Bolt, identified by NSN 5306016083430, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires strict adherence to Navy Critical Safety Item quality standards and the use of Berry Amendment compliant materials. Performance will take place in Cherry Point, and the final product must be packaged according to MIL-STD-2073-1E and MIL-STD-129 specifications. To qualify, the manufacturer must hold SAE AS9100 certification and have completed a CMMC Level 2 self-assessment. The opportunity was posted on November 1, 2026, with a response deadline of November 9, 2026. The work falls under NAICS code 332722 and is managed under the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Machine Screw (NSN 5305017146758) SupplierThis subcontract involves the supply of machine screws for prime contractors supporting the DLA Weapons Support Land Supply Chain. The supplier is responsible for manufacturing or sourcing hardware that adheres to NSN 5305017146758 and the DLA Master List of Technical and Quality Requirements RA001. The scope of work requires the delivery of two packaged machine screws. Strict adherence to military and industry standards is mandatory, including quality control per MIL-STD-1916 or ASQ H1331, packaging per MIL-STD-2073-1E, and marking per MIL-STD-129. Additionally, the contractor must ensure full compliance with the Buy American Act and DFARS 252.204-7012. The solicitation was posted on November 1, 2026, with a response deadline of November 12, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 10 days
NAICS: 332722
New
DIBBS
Helical Torsion Spring Supplier (NSN 5360-99-858-1786)This subcontract involves the manufacture or sourcing of helical torsion springs for prime contractors supporting the DLA Weapons Support Land Supply Chain. The supplier must ensure all products meet NSN 5360-99-858-1786 specifications and DLA Master List RA001 requirements, with a final delivery of one completed and packaged spring. Performance will take place at Robins AFB. Strict compliance standards are required, including supply chain traceability per DLAD C03 and cybersecurity adherence to NIST SP 800-171. Additionally, all items must be packaged according to ASTM D3951 and MIL-STD-129 standards. The response deadline for this opportunity is November 12, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 10 days
NAICS: 332722
New
DIBBS
Manufacturing of Critical Safety Item (CSI) Machine BoltsThis subcontract involves the manufacturing of 1,082 high-precision machine bolts, identified as Critical Safety Items under NSN 5306011080032, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production must strictly adhere to SAE AS9724D and SAE AS7471K standards, with final packaging completed according to MIL-STD-2073-1E. To ensure quality and regulatory compliance, the manufacturer must hold SAE AS9100 certification and utilize precision machining equipment while complying with the Berry Amendment and the Buy American Act. The project is managed by the Department of Defense with performance taking place in Jacksonville, Florida. Interested parties must respond by November 9, 2026, regarding this requirement categorized under NAICS code 332722.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of 62 plain encased seals under NSN 5330010101085. This requirement, identified by solicitation number SPE7L121T093L, specifies a delivery timeline of 168 days after the order is placed, with items to be delivered to DLA Distribution W1A8. Approved sources for this procurement include 91587 15-3058-1 and 99193 1-300-616-01. This procurement is conducted as a Request for Quote under NAICS code 332722. All interested and responsible sources must submit their quotes electronically via the provided link, as hard copies of the solicitation, specifications, plans, or drawings are not available. The point of contact for this action is Marlene Packer, based in Columbus, Ohio.

General Info

DOD seeks quotes for 62 plain encased seals delivered within 168 days.

Agency

Department Of Defense → DLA Land And Maritime

Contract Value

$26,970

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Awardee

TRANSUPPORT INC

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Land And Maritime
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / AgencyDepartment Of Defense → DLA Land And Maritime
Office AddressCOLUMBUS, OH, 43218-3990, USA
Contacts
Marlene Packer
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Proposed procurement for NSN 5330010101085 SEAL,PLAIN ENCASED: Line 0001 Qty 62 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0168 DAYS ADO Approved sources are 91587 15-3058-1; 99193 1-300-616-01. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

NAICS: 332722
New
Federal
VACCO NSNs-Sole Source
Solicitation # CM26265595
DLA Land and Maritime has issued a sources sought solicitation, number CM26265595, to identify potential manufacturers for a variety of hardware components and specialized parts currently associated with Vacco Industries under CAGE code 99517. The required items include fasteners, seals, spacers, sleeve bushings, bearings, and specialized equipment such as pressure indicators and electrical coils. Interested parties must provide information regarding their ability to manufacture these items, including the manufacturer's location and point of contact, and must complete the attached market survey. To be qualified as an Approved Source, companies must submit a comprehensive application package through the DLA Land and Maritime Alternate Offer/Source Approval Request program. This package must include all necessary technical data to prove the contractor can manufacture the products at a quality level equal to or better than the Original Equipment Manufacturer. All responses and documentation should be submitted to Contract Specialist Carlos Oquendo by the deadline of November 6, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 326122
New
Federal
COUPLING ASSEMBLY,SELF-SEALING
Solicitation # CM26208001
This pre-solicitation notice issued by the DLA Land and Maritime organization is for the procurement of self-sealing coupling assemblies, identified by National Stock Number 4730-010957013. The estimated annual demand is 3,534 units, with price break ranges spanning from 221 to 5,304 units. The solicitation is expected to be available on DIBBS on or after December 7, 2026, with a revised response deadline of December 7, 2026. Performance will take place in Columbus, Ohio, and the acquisition follows the policies for commercial items. Because the government lacks complete technical data, the contract will be awarded only to approved sources, which include Eaton, Sikorsky Aircraft Corp, Allen Aircraft Products Inc, and AAR Supply Chain. Award decisions will be based on a combination of price, delivery, and past performance. Requirements include Contractor First Article and Contractor Production Lot Testing, and all offers must be submitted in English and U.S. dollars. Technical drawings and specifications are accessible via the TDMT portal.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 335999
New
Federal
Pressure Switch Component SupplierThe Pressure Switch Component Supplier subcontract involves providing essential raw materials and sub-components to prime contractors manufacturing pressure switches for DLA Land and Maritime. The scope of work includes the delivery of high-grade alloys, specialized polymers, conductive materials, springs, electronic contacts, and specialized seals. All supplied materials must adhere to strict performance tolerances and specific coating requirements to ensure operational integrity. To maintain quality standards, the supplier is required to provide comprehensive material certifications and Certificates of Conformance for all deliveries. The contract falls under NAICS code 335999 and supports the Department of Defense. Interested parties should note the response deadline of November 4, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 335313
New
Federal
Pressure Switch Manufacturer (NSN 5930-01-324-5328)This subcontract involves the manufacture and supply of pressure switches, specifically NSN 5930-01-324-5328, for prime contractors supporting DLA Land and Maritime hardware. The selected provider must utilize precision machining and assembly equipment to fabricate these switches in strict accordance with military specifications or approved technical data. A critical requirement of the contract is the submission of application packages through the DLA Weapons Support Alternate Offer/Source Approval Request Program to obtain AMC 3C approval. This opportunity falls under NAICS code 335313 and is managed by the Department of Defense.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 335313
New
Federal
Switch, Pressure
Solicitation # CM26239122
DLA Land and Maritime, specifically the FMS Tactical LTC Team at DLA Weapons Support - Columbus, is conducting a sources-sought market survey for the procurement of Pressure Switches under NSN 5930-01-324-5328. The agency is seeking information from potential vendors regarding delivery timelines, quantity capabilities, and pricing structures to determine the feasibility of an Indefinite Delivery Contract with a proposed three-year base period and subsequent one-year option periods. The government is specifically looking for data on commercial availability and is requesting drawings or bills of materials to identify similarities between commercial and military equivalents. The current approved source for this item is Cameron Energy Services Corp, identified by CAGE code 05991 with multiple associated part numbers. Due to the AMC 3C designation, this part requires engineering source approval to maintain quality, as the approved sources retain essential technical data and manufacturing knowledge. Other companies wishing to be qualified as approved sources must submit an application package through the DLA Weapons Support Alternate Offer/Source Approval Request Program to demonstrate their ability to manufacture the product to the same or better quality than the original equipment manufacturer. Responses should be directed to Contract Specialist Caitlin Ferry by the deadline of November 4, 2026.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 335999
New
Federal
INSULATING COMPOUND,ELECTRICAL
Solicitation # CM26161009
This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

6 days ago

DEADLINE

in 29 days
View Details
NAICS: 332212
Federal
Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.
Hand and Edge Tool Manufacturing

POSTED

13 days ago

DEADLINE

in 2 days
View Details
NAICS: 339999
Federal
Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.
All Other Miscellaneous Manufacturing

POSTED

13 days ago

DEADLINE

in 2 days
View Details
NAICS: 333618
Federal
Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.
Other Engine Equipment Manufacturing

POSTED

13 days ago

DEADLINE

in 2 days
View Details
NAICS: 332710
Federal
Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.
Machine Shops

POSTED

13 days ago

DEADLINE

in 2 days
View Details
NAICS: 333618
Federal
MULTI NSN DIESEL ENGINE
Solicitation # CM26259595
DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.
Other Engine Equipment Manufacturing

POSTED

13 days ago

DEADLINE

in 2 days
View Details
NAICS: 339991
Federal
SEAL, PLAIN 6649
Solicitation # SPE7MX26RX033
This solicitation seeks to establish an Indefinite Quantity Contract for stock replenishment of plain seals to support military depots. Managed by DLA Weapons Support in Columbus, Ohio, the requirement focuses on NSN 5330-00-631-6649 with an estimated annual demand of 15,721 units. The procurement is designated as a Total Small Business Set-Aside and will be conducted using other than full and open competition procedures, as the items are available from a limited number of approved sources including The Timken Corporation, Randall Mfg Co Inc, Basic Rubber and Plastics Co, and PDI Ground Support Systems, Inc. The solicitation is expected to be available around October 20, 2026, with a response deadline of November 5, 2026. While price is a significant factor, the final award decision will be based on a combination of price, past performance, and delivery. Interested responsible sources may submit quotes via the DIBBS portal, though drawings and specifications will not be provided through that system.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

17 days ago

DEADLINE

in 3 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332722
Awarded
Federal
53--SCREW,CAP,SOCKET HE
Solicitation # SPE4A621T27Z8
DLA Aviation

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 332722
Awarded
Federal
53--NUT,SELF-LOCKING,DO
Solicitation # SPE5E221T1967
DLA Aviation

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 332722
Awarded
Federal
53--SCREW,CAP,SOCKET HE
Solicitation # SPE4A621T66S5
DLA Aviation

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 332722
Awarded
Federal
53--SCREW,CAP,HEXAGON H
Solicitation # SPE4A621U0204
DLA Aviation

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 332722
Awarded
Federal
53--SCREW,SHOULDERED,SL
Solicitation # SPE7M821T4244
DLA Land And Maritime

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 332722
Awarded
Federal
53--SCREW,CAP,SOCKET HE
Solicitation # SPE4A621T66F6
DLA Aviation

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 332722
Awarded
Federal
53--COVER,PROTECTIVE,DU
Solicitation # SPE5E121T0897
DLA Aviation

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 332722
Federal
53--BOLT,MACHINE
Solicitation # N0010421PBZ11
Navsup Weapon Systems Support Mech

POSTED

over 5 years ago

DEADLINE

N/A
View Details
NAICS: 332722
Awarded
Federal
53--NUT,SELF-LOCKING,EX
Solicitation # SPE4A521T276T
DLA Aviation

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 332722
Awarded
Federal
SCREW CAP
Solicitation # SPMYM221Q1127
DLA Maritime - Puget Sound

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 332722
Awarded
Federal
53--DEFLECTOR,DIRT AND LIQUID
Solicitation # SPE5E121U0063
DLA Aviation

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 332722
Awarded
Federal
53--NUT ASSEMBLY,SELF-L
Solicitation # SPE5E121U0042
DLA Aviation

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS