Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

53--SEAL RING,METAL

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This predicted recompete opportunity involves the procurement of metal seal rings for the Department of Defense, specifically managed by DLA Land and Maritime. The current contract, held by SAMIT LLC, is valued at 247,080 dollars and is structured as a firm fixed price agreement. The existing contract is expected to end on September 18, 2026, and was previously competed under the Simplified Acquisition Procedures. The opportunity is classified as likely to be recompeted with a medium confidence level of 65 percent. The procurement falls under NAICS code 339991 and is being coordinated through the office in Columbus, Ohio. Anthony Samad serves as the primary point of contact for this pre-forecast requirement.

General Info

DLA Land and Maritime predicted recompete for metal seal rings valued at 247,080 dollars.

Agency

Department Of Defense → DLA Land And Maritime

NAICS

339991 - Gasket, Packing, and Sealing Device Manufacturing

Place of Performance

OH, 208552140, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMar 18

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Anthony Samad

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: SPE7L325P4498 Incumbent: SAMIT LLC Contract Value: $247,080 Potential End Date: 2026-09-18T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 65/100)

Similar Contracts

Same NAICS industry code

Hatch Seal Supply (NSN 5330-00-553-0148)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-T-1778

This solicitation, issued by the DLA Weapons Support Maritime Supply Chain, is a small business set-aside for the procurement of 25 spring-loaded shaft seal assemblies under NSN 4320-01-140-4084. The requirement is categorized under NAICS code 339991, with a delivery timeframe of 116 days after order and a designated delivery location in Jacksonville, Florida. The government specifies that items must be delivered FOB Destination and prohibits the use of additive manufacturing for the production of these components. The contract mandates strict adherence to DLA packaging and quality standards, specifically referencing RP001 for palletization, ASTM D3951 for general packaging, and MIL-STD-129 for marking and labeling. Technical data associated with this item is subject to export control under ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of hexavalent chromium. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

SEAL, PLAIN ENCASED

Solicitation # SPE7L3-27-T-1579

Solicitation SPE7L3-27-T-1579 is a request for quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of seven plain encased seals, identified by NSN 5330-00-821-2374 and part number CB124-23. This is designated as a critical application item, and the materials must be free of asbestos as defined in FED-STD-313. The delivery requirement is 20 days after receipt of order, with a required delivery date of November 2, 2026. Shipping is FOB Origin, and the items are to be delivered to the German Armed Forces Command USA in Dulles, Virginia. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the risk of ultraviolet deterioration, the seals must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Technical and quality requirements are further governed by DLA master list items RP001 and RQ011. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and basic safeguarding of covered contractor information systems. Quotations are due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7L3-27-T-1591

Solicitation SPE7L3-27-T-1591 is a request for quotations issued by the DLA Weapons Support Land Supplier Opns Vehicle Spt for the procurement of 12 gaskets under National Stock Number 5330-01-687-9713. The contract is managed by Susan Diamond and utilizes the First Destination Transportation program to minimize costs through Government-Arranged Transportation. Delivery is required within 10 days after receipt of order, with an original required delivery date of July 23, 2026, and an FOB origin shipping term to a destination in Jordan. The contractual end items must be free of asbestos and require specific packaging to prevent deterioration from ultraviolet rays, necessitating the use of medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 33 applied for shelf life. The procurement is subject to the Buy American Act and Berry Amendment, and it prohibits the use of additive manufacturing for the items unless authorized. Payment and invoicing are processed electronically through the Wide Area WorkFlow system. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

PACKING ASSEMBLY

Solicitation # SPE7M2-27-T-0547

Solicitation SPE7M2-27-T-0547 is a small business set-aside request for quotations issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 941 units of a packing assembly, identified by NSN 5330-00-202-2602. The items are composed of nylon and synthetic rubber and must comply with technical specifications MIL-S-19622F SUP 1 and MIL-S-19622/20H. Delivery is required within 184 days after order, with a need ship date of May 13, 2027, and a final delivery date of June 25, 2027, to DLA Distribution San Diego, California. The contract is established as FOB Origin, with inspection and acceptance occurring at the destination. The procurement includes stringent quality and safety requirements, including a total prohibition of asbestos per FED-STD-313 and strict controls on mercury containment according to NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129 and MIL-STD-130N, specifically utilizing special marking code 32 for shelf life. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the Berry Amendment. Quotations must be submitted via DIBBS by November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-3044

Solicitation SPE7L1-27-T-3044, issued by the DLA Weapons Support Land Supply Chain, is for the procurement of 426 O-rings (NSN 5331-01-421-6115) with a required delivery date of July 1, 2026. The contract is managed under the First Destination Transportation program, with delivery, inspection, and acceptance all occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The delivery timeframe is specified as 22 days after receipt of order, with shipping terms set as FOB Origin. Technical requirements are governed by the DLA Master List of Technical and Quality Requirements, and the items must adhere to strict packaging and marking standards. Due to the risk of ultraviolet deterioration, the O-rings must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. General packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system. The procurement includes various FAR and DFARS clauses, including the Buy American Act, cybersecurity reporting requirements under DFARS 252.204-7012, and specific prohibitions regarding covered defense telecommunications equipment.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

FELT, MECHANICAL, PREFOR

Solicitation # SPE7L3-27-Q-0083

Solicitation SPE7L3-27-Q-0083 is a small business set-aside for the procurement of 29 preformed mechanical felt items (NSN 5330-01-652-3257) under a firm fixed price agreement. The items are designated as critical application items and must be delivered within 90 days after the order. Delivery is FOB origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is governed by NAICS code 339991 and requires compliance with ISO 9001:2015 quality standards, MIL-STD-130 for item unique identification, and DLA Directive C03 for supply chain traceability. Technical requirements include adherence to basic drawing NR 13873 and QAP 13873. Due to the risk of ultraviolet ray deterioration, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for FAA airworthiness approval and the prohibition of Class I ozone depleting chemicals. Sampling will follow MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7L3-27-T-1603

Solicitation SPE7L3-27-T-1603 is issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of 11 units of rubber strips, identified by NSN 5330-00-273-2567. This is a Foreign Military Sales requirement for Israel, with delivery terms set as FOB Origin and a required delivery date of July 21, 2026. The items must be manufactured in accordance with Basic Drawing NR 78286 65205-08033 Revision E and TDP Rev A Gen 1. A critical requirement is that no asbestos, as defined in FED-STD-313, is permitted in the items. The contract mandates strict quality and packaging standards, including source inspection at the origin and sampling conducted per MIL-STD-1916 or ASQ H1331. Due to the potential for ultraviolet degradation, the rubber strips must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. General packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Administrative requirements include electronic invoicing via Wide Area WorkFlow and adherence to DFARS cybersecurity and domestic sourcing regulations, including the Buy American Act.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

SEAL, SPLIT, INFLATAB

Solicitation # SPE7L3-27-T-1592

Solicitation SPE7L3-27-T-1592 is issued by the DLA Weapons Support Land Supplier Opns Vehicle Spt for the procurement of two inflatable split seals, identified by NSN 5330-01-245-7562 and part number AM1003M035. The items are subject to a non-extendable shelf life of 60 months and must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is October 29, 2027, with a need ship date of April 6, 2027, and a delivery window of 147 days after order. The contract mandates strict material and environmental compliance, requiring that all supplied items be free of asbestos and that mercury or mercury-containing compounds not be intentionally added. Due to potential UV deterioration, the items must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. General packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American Act and Berry Amendment. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7L3-27-T-1587

Solicitation SPE7L3-27-T-1587 is a fixed-price procurement issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the acquisition of 183 gaskets, identified by NSN 5330007994963. The contract requires delivery to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of April 30, 2027, and a delivery window of 170 days. The items are designated as critical application items and must adhere to specific technical standards, including a non-extendable shelf life of 180 months and a strict prohibition of asbestos as defined in FED-STD-313. The contractor must comply with rigorous packaging and marking standards, specifically MIL-STD-2073-1E, MIL-STD-129, and RP001 for palletization. Due to the potential for deterioration from ultraviolet rays, the items must be sealed in medium-duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Administrative requirements include electronic invoicing through the Wide Area Workflow system and adherence to CMMC Level 2 self-assessment and DFARS safeguarding of covered defense information. Inspection and acceptance will occur at the destination per FAR 52.246-1.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7M2-27-T-0554

Solicitation SPE7M2-27-T-0554 is issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 27 units of O-rings, identified by NSN 5331013888627 and Parker-Hannifin Corp part number 2-220N525-60. The items must be provided in accordance with TDP Rev A Gen 1 and are classified as Type I (Code Y) with a non-extendable shelf life of 180 months. Delivery is required within 167 days after receipt of order, with inspection and acceptance occurring at the destination. The contract specifies that mercury or mercury-containing compounds shall not be intentionally added to the hardware, with limited exceptions for functional requirements. The procurement is governed by NAICS code 339991 and requires compliance with the Buy American and Balance of Payments Program, as well as the Berry Amendment. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements under RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Evaluation factors include a price preference for HUBZone concerns, and the use of additive manufacturing is strictly prohibited unless specifically authorized. The contract also incorporates standard FAR and DFARS clauses regarding equal opportunity, cybersecurity reporting, and the safeguarding of covered defense information.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

SEAL, PLAIN ENCASED

Solicitation # SPE7L3-27-T-1597

Solicitation SPE7L3-27-T-1597 is a procurement request by the Defense Logistics Agency for 11 units of plain encased seals, identified by NSN 5330-00-559-2460. This critical application item must adhere to specific technical dimensions, including a 1.000 inch shaft diameter and a 2.000 inch bore diameter. The contract requires strict compliance with the DLA Master List of Technical and Quality Requirements and specifies that the items must be free of asbestos and intentionally added mercury. Quality assurance will be managed through destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, with a requirement for zero non-conformances in sample lots. Delivery is set for 147 days after award, with a required delivery date of January 23, 2027, shipped FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Due to the potential for ultraviolet degradation, the seals must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and marked according to MIL-STD-129 and MIL-STD-130N. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation incorporates various DFARS and FAR clauses, including those regarding cybersecurity reporting, hazardous material identification, and the HUBZone price evaluation preference.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

Pressure Switch Component SupplierThe Pressure Switch Component Supplier subcontract involves providing essential raw materials and sub-components to prime contractors manufacturing pressure switches for DLA Land and Maritime. The scope of work includes the delivery of high-grade alloys, specialized polymers, conductive materials, springs, electronic contacts, and specialized seals. All supplied materials must adhere to strict performance tolerances and specific coating requirements to ensure operational integrity. To maintain quality standards, the supplier is required to provide comprehensive material certifications and Certificates of Conformance for all deliveries. The contract falls under NAICS code 335999 and supports the Department of Defense. Interested parties should note the response deadline of November 4, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Pressure Switch Manufacturer (NSN 5930-01-324-5328)This subcontract involves the manufacture and supply of pressure switches, specifically NSN 5930-01-324-5328, for prime contractors supporting DLA Land and Maritime hardware. The selected provider must utilize precision machining and assembly equipment to fabricate these switches in strict accordance with military specifications or approved technical data. A critical requirement of the contract is the submission of application packages through the DLA Weapons Support Alternate Offer/Source Approval Request Program to obtain AMC 3C approval. This opportunity falls under NAICS code 335313 and is managed by the Department of Defense.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Switch, Pressure

Solicitation # CM26239122

DLA Land and Maritime, specifically the FMS Tactical LTC Team at DLA Weapons Support - Columbus, is conducting a sources-sought market survey for the procurement of Pressure Switches under NSN 5930-01-324-5328. The agency is seeking information from potential vendors regarding delivery timelines, quantity capabilities, and pricing structures to determine the feasibility of an Indefinite Delivery Contract with a proposed three-year base period and subsequent one-year option periods. The government is specifically looking for data on commercial availability and is requesting drawings or bills of materials to identify similarities between commercial and military equivalents. The current approved source for this item is Cameron Energy Services Corp, identified by CAGE code 05991 with multiple associated part numbers. Due to the AMC 3C designation, this part requires engineering source approval to maintain quality, as the approved sources retain essential technical data and manufacturing knowledge. Other companies wishing to be qualified as approved sources must submit an application package through the DLA Weapons Support Alternate Offer/Source Approval Request Program to demonstrate their ability to manufacture the product to the same or better quality than the original equipment manufacturer. Responses should be directed to Contract Specialist Caitlin Ferry by the deadline of November 4, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

INSULATING COMPOUND,ELECTRICAL

Solicitation # CM26161009

This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

HEADSET-MICROPHONE : NSN 5965-01-204-8505

Solicitation # SPE7MX26RX089

This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7MX26RX102

DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.

POSTED

DEADLINE

MULTI NSN DIESEL ENGINE

Solicitation # CM26259595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

SEAL, PLAIN 6649

Solicitation # SPE7MX26RX033

This solicitation seeks to establish an Indefinite Quantity Contract for stock replenishment of plain seals to support military depots. Managed by DLA Weapons Support in Columbus, Ohio, the requirement focuses on NSN 5330-00-631-6649 with an estimated annual demand of 15,721 units. The procurement is designated as a Total Small Business Set-Aside and will be conducted using other than full and open competition procedures, as the items are available from a limited number of approved sources including The Timken Corporation, Randall Mfg Co Inc, Basic Rubber and Plastics Co, and PDI Ground Support Systems, Inc. The solicitation is expected to be available around October 20, 2026, with a response deadline of November 5, 2026. While price is a significant factor, the final award decision will be based on a combination of price, past performance, and delivery. Interested responsible sources may submit quotes via the DIBBS portal, though drawings and specifications will not be provided through that system.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

93--WHS GASKET NEOPRENE ROLL

Grand Coulee Power Office

POSTED

over 1 year ago

DEADLINE

53--SEAL ASSY,INTERSLAT

Solicitation # SPE4A725T097F

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--GASKET,SPIRAL WOUND

Solicitation # SPE7LX25U4124

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--SEAL RING,METAL

Solicitation # SPE7L325T9892

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7LX25U3550

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7M425T1615

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7L125T113Y

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7LX25U4014

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--PACKING,PREFORMED

Solicitation # SPE7L325T9793

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE4A725T092Q

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--RETAINER,SEAL

Solicitation # SPE7L325T9802

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--RETAINER,SEAL

Solicitation # SPE7L325T9812

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS