Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

57mm Target Practice Cartridge

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of the Navy, through the Conventional Ammunition Division, has issued a forecast for the procurement of 57mm Target Practice Cartridges. This requirement is categorized under NAICS code 332993 and is intended to support ammunition needs for the naval service. The place of performance for this contract is designated as Picatinny Arsenal in New Jersey. Interested parties can find further information regarding this opportunity through the Secretary of the Navy's small business portal.

General Info

Navy procurement of 57mm Target Practice Cartridges to be performed at Picatinny Arsenal.

Agency

Department Of The Navy → Conventional Ammunition Division (W7)View Agency

NAICS

332993 - Ammunition (except Small Arms) ManufacturingView NAICS

Place of Performance

PICATINNY ARSENAL, NJ, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 2

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Conventional Ammunition Division (W7)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Navy → Conventional Ammunition Division (W7)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement of 57mm Target Practice Cartridges

Similar Contracts

Same NAICS industry code

BOAST RFOP - Holder, Ammunition - NSN: 1398-01-330-9529

Solicitation # PANDTA-24-P-0000_004297

The U.S. Army Contracting Command - Detroit Arsenal is soliciting proposals under the Basic Ordering Agreement Sustainment Track program for three units of Holder, Ammunition identified by NSN 1398-01-330-9529 and Part Number 12916856. This is a Total Small Business Set-Aside action limited to vendors with a fully executed BOAST Basic Ordering Agreement in place by the proposal closing date of September 8, 2026. Proposals must be submitted electronically via email with a specified subject line and include a completed and signed pricing sheet; no technical proposal is required. The award will be made on a Lowest Price Technically Acceptable basis, with price as the sole evaluation factor, and only offers from eligible BOA holders will be considered. The item is export-controlled, requiring vendors to be certified in the Joint Certification Program to access the associated Technical Data Package. Delivery is FOB Destination with inspection and acceptance occurring at Origin, and the Government requires adherence to MIL-STD-2073-1 and MIL-STD-129 for packaging and marking, including compliance with ISPM 15 for wood packaging and IATA/IMDG regulations for hazardous materials. The contractor must provide a First Article Test Report and submit engineering documentation including Engineering Change Proposals, Requests for Variance, and Test Procedures. Quality systems must conform to ISO 9001:2015 excluding section 8.3, and acceptance will follow MIL-STD-1916 with VL IV for major characteristics and VL II for minor characteristics. The contract includes a 12-month option for an additional three units, exercisable within 365 days. Cybersecurity requirements under DFARS 252.204-7012 and NIST SP 800-171 are incorporated, along with Buy American provisions and prohibitions on certain telecommunications equipment. Payment terms are net 30 days, and the contractor must comply with all applicable representations and certifications including small business status, foreign energy sourcing restrictions, and security exclusions. All information, including amendments, must be monitored via SAM.gov, and the Government assumes no responsibility for notifying vendors of updates.

POSTED

DEADLINE

13--RING,CLAMPING

Solicitation # N0010425QNC18

This solicitation, numbered N0010425QNC18, is for the procurement of three units of the RING, CLAMPING, identified by NSN 1350-0167-11961, under Emergency Acquisition Flexibilities and designated as a Total Small Business Set-Aside. The requirement mandates strict adherence to technical specifications outlined in drawing 6964634 with cage code 53711, including physical identification in accordance with MIL-STD-130 and compliance with ISO 9001 quality system standards, though suppliers currently certified under MIL-I-45208 may continue using that standard. The contract includes comprehensive quality assurance protocols requiring the contractor to perform all inspections, maintain records for four years after final delivery, and ensure that all items meet contractual obligations regardless of specific inspection clauses. Mercury-free materials are required, with strict prohibitions against mercury contamination in manufacturing, assembly, or testing, and any proposed use of mercury must receive prior written approval from the Procurement Contracting Officer with detailed safety and containment plans. The solicitation mandates First Article Testing and Production Lot Testing by the Government, both of which involve non-destructive evaluation of one unit per requirement, submitted to the Naval Undersea Warfare Center Division Newport in Rhode Island. Approved first article units may be delivered as part of the contract quantity if undamaged during testing. Production lot testing must be completed within 60 days of delivery. The contract is rated DO under the Defense Priorities and Allocations System (DPAS), and provision 52.211-14 applies to ensure national defense priority status. All awarded contracts will be issued bilaterally upon written contractor acceptance, with contractual documents deemed issued upon electronic transmission such as email or fax. Offerors must be authorized distributors of the original manufacturer, submitting verified proof on company letterhead, and must request drawing access via SAM.gov before submitting offers. The response deadline has been extended to 4:30 PM local time on May 7, 2026, and all submissions must acknowledge receipt of amendments. Invoicing will be processed through WAWF using the Invoice and Receiving Report (Combo) method, and the contracting office is located in Mechanicsburg, PA.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

50mm weapon based Air Defense Counter-Unmanned Aircraft System (C-UAS)

Solicitation # W15QKN-26-X-1C9P

The U.S. Army Contracting Command – New Jersey, acting on behalf of the Office of the Project Manager, Maneuver Ammunition Systems, is conducting a market survey to identify industry sources capable of developing a 50mm weapon-based Air Defense Counter-Unmanned Aircraft System to defeat Class 1, 2, and 3 UAS threats. Respondents must demonstrate existing or conceptual capabilities to integrate a 50x228mm ammunition solution with a capable fire control and sensor architecture for effective tracking, engagement, and neutralization of hostile drones. The government may provide a loan of one XM913 50mm cannon assembly, required quantities of 50mm ammunition, necessary technical data and interfaces, and access to a test facility for a live-fire demonstration, though no performance specifications or technical data will be provided at this stage. Companies must submit detailed descriptions of their C-UAS system architecture, proposed sensor and fire control integration, a draft test or demonstration plan, and a comprehensive timeline for design, integration, and delivery of a system ready for live-fire evaluation. Responses must include company name, CAGE code, point of contact information, business size classification, and whether the respondent intends to participate as a prime or subcontractor. Subcontractors must meet the same manufacturing and technical resource criteria as the prime contractor. All submissions must be received by 3 PM EST on August 31, 2026, via email to the designated government points of contact. Companies are required to identify any proprietary information and must have the majority of skills and facilities necessary to manufacture the system or demonstrate the ability to obtain them within a reasonable timeframe. To facilitate future access to restricted technical data, respondents are encouraged but not required to complete and submit the AMSTA-AR Form 1350 and DD Form 2345 prior to any formal solicitation. Full compliance with U.S./Canada Joint Certification Office registration, NIST assessment documentation in SPRS, and completion of DoD export control training is mandatory for entities seeking access to controlled technical data in the future, along with export licensing for foreign subcontractors. This effort is strictly a market survey and does not oblige the government to issue a solicitation or compensate respondents for their submissions.

W6QK Acc-Ri-Picatinny

POSTED

DEADLINE

155mm Modular Artillery for Combat Effectiveness (MACE)

Solicitation # W15QKN26R1C5R

W6QK Acc-Ri-Picatinny

POSTED

DEADLINE

in about 1 month

Next Generation Ammunition & Munitions Equipment (NGAME) for MMHE RFP/Solicitation

Solicitation # FA853226RB002

The Government is soliciting qualified U.S.-based industrial sources through the New Generation Ammunition & Munitions Equipment (NGAME) RFP to establish a robust vendor base capable of designing, developing, testing, manufacturing, and sustaining Munitions Handling Equipment (MMHE) that meets stringent nuclear certification standards per AFI 63-125. The contract is structured as a multiple-award indefinite-delivery/indefinite-quantity (IDIQ) with a maximum value of $920 million over a 10-year period, comprising a three-year base and seven one-year options. Foreign participation is prohibited, and all end items must be manufactured in the United States in compliance with the Buy America Act. Only entities with a valid U.S. Commercial and Government Entity (CAGE) code are eligible for direct award, and all submissions must be made through approved U.S.-only channels. The solicitation requires detailed technical, small business participation, and price proposals submitted in four distinct volumes with strict page and format limitations, and all offerors must demonstrate compliance with CMMC Level 2 cybersecurity standards, ISO 9001:2015 quality systems, and military marking standards including MIL-STD-130 for unique item identification using Data Matrix symbology and MIL-STD-129 for packaging and shipment labeling. The Technical Proposal is assessed on a pass/fail basis using a self-scoring matrix requiring a minimum of two points, and Small Business Participation is evaluated on three mandatory elements related to outreach and subcontracting opportunities; both must be deemed acceptable for award consideration. Price is not rated but must be reasonable and compliant, with award determined under the Lowest Price Technically Acceptable (LPTA) methodology. All delivery orders will define specific quantities, delivery locations, and FOB terms, with performance occurring primarily at Warner Robins Air Force Base in Georgia. Payments must be processed through Wide Area WorkFlow (WAWF), and each awardee is required to attend a mandatory virtual post-award conference costing no more than $100. All submitted data must include Unique Entity IDs and CAGE codes in accordance with DFARS requirements, and compliance with U.S. sanctions related to Venezuela, China, and Xinjiang is mandatory.

FA8532 Aflcmc Roka

POSTED

DEADLINE

Military-Grade Hydraulic & Control Systems Supply

POSTED

DEADLINE

Precision Aerospace Bearing ManufacturingThe Precision Aerospace Bearing Manufacturing subcontract, issued by the Defense Logistics Agency under the Department of Defense, focuses on the production of high-precision ball annular bearings for aerospace use. The scope of work encompasses the entire production lifecycle, starting from raw material sourcing through to final assembly, ensuring all components meet rigorous military and AS9100 quality standards. Classified under NAICS code 332993, this agreement ensures the delivery of critical aerospace components that adhere to strict defense specifications. The contract was posted on August 17, 2026, and is managed through the DLA's procurement systems to support high-precision engineering requirements for military aviation.

Defense Logistics Agency

POSTED

DEADLINE

Precision Manufacturing of Fuel Atomizer AssemblyThis subcontract with the Defense Logistics Agency under the Department of Defense involves the precision manufacturing of seven fuel atomizer assembly units, identified by part number 2910004929419. The scope of work requires the contractor to perform CNC machining, assembly, and rigorous quality control inspections to ensure all units meet strict military specifications before final packaging and delivery. The project falls under NAICS code 332993 and is managed through the Defense Logistics Agency. Key deliverables include the completed assemblies and the associated inspection documentation necessary to verify compliance with the technical requirements of the fuel atomizer system.

Defense Logistics Agency

POSTED

DEADLINE

Precision Actuator Manufacturing & SupplyThis subcontract, issued by the Department of Defense through the ASC Supplier Oper OEM Division, involves the manufacture and supply of six precision drive shaft actuators. The units must be produced according to strict military specifications, which include requirements for compliant packaging and marking, with delivery terms set as FOB Origin. The project is categorized under NAICS code 332993 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by the deadline of August 25, 2026, following the posting date of August 17, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Roller Bearing Supply – Airframe NSN 3110-00-585-1253This subcontract with the Defense Logistics Agency involves the supply of 675 roller bearings designed for airframe applications. The components must adhere to MIL-DTL-197M specifications and are identified by National Stock Number 3110-00-585-1253. The contract is categorized under NAICS code 332993 and requires delivery FOB Destination to DLA depots within the continental United States. The agreement was posted on August 17, 2026, under the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Precision Manufacturing of Servovalve Crank (C5787-17)This subcontract with the Defense Logistics Agency under the Department of Defense involves the precision manufacturing of a high-precision mechanical crank component, identified by NSN 1650-00-377-7085 and Part Number C5787-17. The component is designed for use in servovalve systems and must strictly adhere to military and aerospace tolerances to ensure operational reliability. The contract falls under NAICS code 332993 and was posted on August 17, 2026. All production requirements are managed through the Defense Logistics Agency to support critical hardware needs within the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Precision Aerospace Component ManufacturingThis subcontract opportunity with the Department of Defense, managed by Maritime Supply Chain ESOC Buys, involves the precision manufacture of Coupling Half, Quick Disconnect components (MS33656-4) for the E/I Corsair A7-D aircraft. The contractor must adhere to strict military specifications regarding dimensions and threading, as well as specific color dyeing requirements in blue and international orange. The solicitation was posted on August 16, 2026, with a response deadline of August 27, 2026. Classified under NAICS code 332993, the place of performance is located at APO 96278-2069.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

More opportunities from Department Of The Navy → Conventional Ammunition Division (W7)

Same awarding agency

57mm HE-PD CartridgeThe Department of the Navy, through the Conventional Ammunition Division, has issued a forecast for the procurement of 57mm HE-PD Cartridges. This requirement is categorized under NAICS code 332993 and is intended to support ammunition needs for the naval force. The place of performance for this contract is designated as Picatinny Arsenal in New Jersey. Interested parties can find further information regarding small business opportunities through the Secretary of the Navy's official portal.

Ammunition (except Small Arms) Manufacturing

POSTED

about 2 months ago

DEADLINE

57mm Dummy Cartridge

Ammunition (except Small Arms) Manufacturing

POSTED

about 2 months ago

DEADLINE

Gun Weapon System - 5 Inch Projectile Bodies and Brass Cartridge Cases

Ammunition (except Small Arms) Manufacturing

POSTED

about 2 months ago

DEADLINE

57mm High Explosive Pre-Fragmented, Programmable, Proximity Fuzed (HE-3P) Cartridge

Ammunition (except Small Arms) Manufacturing

POSTED

about 2 months ago

DEADLINE