This Government Contract opportunity from Department Of Defense was posted on June 11, 2010. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

58--Garmin Foretrex 201

Awarded

0010002981Federal

Submission Closed06/11/2010, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334511

New

Federal

Automated Traffic Enforcement Trailer

Solicitation # W911S226U4411

The Department of Defense, specifically through the W6QM Micc-Ft Drum office in Fort Drum, New York, is seeking an Automated Traffic Enforcement Trailer under solicitation number W911S226U4411. This combined contract opportunity is designated as a total small business set-aside and falls under NAICS code 334511. The solicitation was posted on September 4, 2026, with a response deadline of September 11, 2026, at 12:35 PM. Interested parties can coordinate with the primary point of contact, Kevin Nelson, regarding the requirements for the equipment to be performed in the 54656 zip code area.

POSTED

DEADLINE

66--INDICATOR,ATTITUDE, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBB18

This solicitation, issued by NAVSUP Weapon Systems Support Philadelphia, is a Request for Quotations for the repair, overhaul, upgrade, and inspection of 33 Attitude Indicators (NSN 6610-01-101-1927 LC, P/N 622-3374-002). The objective is to return these units to a Ready For Issue condition, ensuring they perform reliably in operational environments. The contract includes an initial induction period of 365 calendar days, which the government may extend by an additional year. Offerors must provide option pricing for a maximum of 135 units over the total contract period. Award will be granted to the offeror with the lowest price technically acceptable quote, with past performance evaluated via the DoD Supplier Performance Risk System. The contractor is responsible for providing all labor, facilities, materials, and tooling, as government-furnished manufacturing aids are not provided. Key technical requirements include compliance with ISO 9001 or SAE AS9100 quality systems and calibration standards such as ANSI/NCSL Z540.3 or ISO-10012-1. Specific prohibitions are in place regarding the use of MIL-W-81381 wire, requiring the use of SAE-AS22759 series wire instead. The contract establishes strict protocols for Beyond Economical Repair and Missing on Induction determinations, both of which require written concurrence from DCMA. Deliveries are FOB Destination with a 90-day delivery window, and all packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support

POSTED

DEADLINE

58--THERMAL IMAGING SYS

Solicitation # N0010426RQA81

Solicitation N00104-26-R-QA81, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a firm fixed price negotiated procurement for the manufacture of Thermal Imaging Systems under NSN 5855-01-499-1240. The government is seeking a single award based on the most advantageous offer, with past performance weighted as more important than price. The evaluation process utilizes the DoD Supplier Performance Risk System for quality ratings, and the government reserves the right to award to other than the lowest priced offer. Proposals must be submitted via NECO or email, and the current requested delivery date is 180 days after award. The contract mandates strict adherence to quality and technical standards, including physical identification per MIL-STD-130 and preservation and packaging according to MIL-STD-2073. Inspection and acceptance are conducted at the origin, with the contractor remaining responsible for all inspection requirements and maintaining records for 365 days post-delivery. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, compliance with Buy American and Balance of Payments program certificates, and adherence to cybersecurity standards for covered defense information. Offerors must be authorized distributors of the original manufacturer to be considered for award.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

66--PROCESSOR,FLIGHT IN, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBB19

Solicitation N0038326QBB19, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the teardown, evaluation, repair, and modification of Flight Processors (NSN 6610-01-622-1414). The contract covers a maximum of 30 units over a potential two-year period, with a delivery requirement of 90 days and FOB Destination terms. Award will be based on Lowest Price Technically Acceptable criteria, though past performance is noted as more important than price. Because the item is flight critical, government source approval is mandatory prior to award. The contractor is responsible for providing all labor, materials, and tooling necessary to return units to Ready For Issue condition, as the government will not provide manufacturing aids. Strict quality standards are mandated, including compliance with ISO 9001 or SAE AS9100 and calibration standards such as ANSI/NCSL Z540.3. Key technical requirements include the prohibition of MIL-W-81381 wire in favor of SAE-AS22759 and adherence to MIL-STD-130 for markings and MIL-STD-2073 for packaging. The contractor must maintain comprehensive quality control documentation and historical record files for each serial number, with formal Material Review Board authority for as-is dispositions retained by the government.

Navsup Weapon Systems Support

POSTED

DEADLINE

58--THERMAL IMAGING SYS, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RQA79

Solicitation N0010426RQA79, issued by NAVSUP Weapon Systems Support Mechanicsburg, is an unrestricted negotiated request for proposal for the teardown, evaluation, repair, and modification of 41 Thermal Imaging Systems (NSN 5855-01-499-1240). The government contemplates the award of a firm-fixed-price contract with a requested delivery date of 180 days after award. All repair work must adhere to contractor standard practices and approved technical directives, with physical identification required per MIL-STD-130 and packaging conducted according to MIL-STD-2073. The contractor is responsible for all inspection and testing at the point of origin, maintaining records for 365 days post-delivery. Any critical or major design or material variances must be submitted via DCMA or SUSHPIP and approved through a formal contract modification. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. Offerors must be authorized distributors of the original manufacturer and comply with various federal and defense acquisition regulations, including cybersecurity requirements for covered defense information and Buy American certifications.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

NERC Compliant Battery Monitoring SystemThis subcontract involves the supply and configuration of battery monitoring systems for prime contractors working on Dalton Utilities energy facility projects in Georgia. The scope of work includes providing monitoring sensors, data acquisition hardware, and specialized software designed to track battery health and performance. A critical requirement of the delivery is that the functional system must maintain full compliance with NERC PRC-005-06 standards. The opportunity was posted on October 28, 2026, with a response deadline of November 11, 2026. Classified under NAICS code 334511, the contract focuses on the delivery of a fully operational Battery Monitoring System to ensure the reliability and safety of the utility's energy infrastructure.

POSTED

DEADLINE

Searchlight Unit Supplier (NSN 6230123124633)This subcontract involves the supply of three specialized searchlight units for prime contractors delivering to the Defense Logistics Agency. The hardware must strictly adhere to NSN 6230123124633 and the DLA Master List of Technical and Quality Requirements RA001. A critical manufacturing constraint is that the parts must not be produced using additive manufacturing processes. Eligible suppliers are required to maintain a valid UEI and CAGE code. The project falls under NAICS code 334511 and is associated with the Department of Defense. The response deadline for this requirement is November 9, 2026, with the place of performance located at FPO 09573.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Display Units (NSN 7025-01-686-3479)This HUBZone set-aside subcontract involves the procurement of 21 new, unused, and non-refurbished display units under NSN 7025-01-686-3479 for prime contractors supporting DLA Troop Support. The Department of Defense requires genuine OEM materials sourced through authorized distributors, with a strict prohibition against the use of additive manufacturing for production. Deliverables must be shipped FOB Origin to Tracy, California, and must adhere to specific packaging and marking standards, including ASTM D3951, RP001, and MIL-STD-129. The opportunity is categorized under NAICS code 334511, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Electrical Sub-Assembly and IntegrationThis subcontract for Electrical Sub-Assembly and Integration involves the supply and integration of electrical components for prime contractors supporting DLA aviation lighting projects. The scope of work includes soldering, wiring harness assembly, and the installation of light sources and lenses into housings in strict accordance with Reference Drawing 78286 SS3995. The final deliverables are fully wired and assembled light units that must comply with MIL-STD-129 standards for marking and labeling. Managed by the Department of Defense through the Jacksonville Building, the project falls under NAICS code 334511 and will be performed in Jacksonville, Florida. Interested parties must note the response deadline of November 9, 2026, for this specific procurement effort.

POSTED

DEADLINE

Supply of Navigational Lights (NSN 6220-01-568-5419)This subcontract involves the manufacture or sourcing of three navigational light assemblies, identified by NSN 6220-01-568-5419, to support prime contractors fulfilling DLA supply contracts. The project falls under NAICS code 334511 and is managed by the Department of Defense through DLA DIST San Joaquin, with the place of performance located in Tracy, California. The contractor is responsible for ensuring all units are packaged and labeled according to strict military and industry standards, including ASTM D3951 for non-hazardous materials, TQ Requirement IP025 and FED-STD-313 for hazardous materials, and MIL-STD-129 for shipment labeling. Additionally, the provider must maintain full compliance with the Buy American Act to successfully deliver the three required units.

POSTED

DEADLINE

Aircraft Landing Light Supplier (NSN 6220016458829)This subcontract through Depot Hill for the Department of Defense requires the manufacture or sourcing of four aircraft landing light assemblies under NSN 6220016458829. The supplier is responsible for ensuring all units meet strict aviation lighting quality control standards and adhere to packaging requirements specified by MIL-STD-129 and the DLA Master List. Performance will take place at Hill AFB. To be eligible, contractors must provide a CMMC Level 2 Self-Assessment and maintain full compliance with the Buy American Act and the Berry Amendment. The response deadline for this opportunity is November 9, 2026.

POSTED

DEADLINE

Supply of Display Units (NSN 7025016587076)This subcontract involves the manufacture or procurement of two Display Units meeting the specifications of NSN 7025016587076 for prime contractors supporting the Defense Logistics Agency. The selected provider is responsible for the production, packaging, and coordination of shipment via the First Destination Transportation program, with final delivery to DLA Dist San Joaquin in Tracy, California. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334511 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, to fulfill the requirements for this specific hardware supply contract.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 20 hours ago

DEADLINE

in 11 days

AI Contract Overview

Solicitation 0010002981 is an invitation for bids issued by the USA ACA Ft. Stewart for the procurement of 450 new Garmin Foretrex 201 units. This requirement is designated as a small business set-aside under NAICS code 334511. The government requires exact match, new equipment only, with no remanufactured products or partial shipments permitted. Delivery is FOB Destination to Fort Stewart, Georgia. The procurement process will be conducted via a competitive reverse auction through the third-party platform FedBid. All responsible offerors must submit their pricing through this online exchange, and bids must remain valid for 30 calendar days following submission. Payment will be made via Government VISA Credit Card. Offerors are required to submit specifications and descriptive literature for the items and must comply with various FAR commercial item terms and conditions.

General Info

Agency

Department Of Defense → W6QM Micc-Ft Stewart

Contract Value

$53,302.5

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

GA, USA

Set-Aside

NONE

Awardee

ATLANTIC DIVING SUPPLY, INC.

Award Issued Date

06/11/2010, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

2 updates

PhaseAwarded

PostedSep 1

Combined Synopsis

Notice updatedSep 1

Response deadline changed from Sep 7, 2009 to Sep 8, 2009. The notice description changed.

Notice updatedSep 1

The notice description changed.

AwardedJun 11

Contract was awarded

Submission Closed

06/11/2010, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QM Micc-Ft Stewart

ContactsNo contacts available

OfficeFORT STEWART, GA, 31314-3324, USA

Organization / AgencyDepartment Of Defense → W6QM Micc-Ft Stewart

Office AddressFORT STEWART, GA, 31314-3324, USA

ContactsNo contact information available

Full Description

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is 0010002981 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-34. The associated North American Industrial Classification System (NAICS) code for this procurement is 334511 with a small business size standard of 750.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2009-09-08 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Stewart , GA 31314 The USA ACA Ft. Stewart requires the following items, Exact Match Only, to the following: LI 001, GARMIN FORETREX 201 - ITEM# 010-0361-00, 450, EA; For this solicitation, USA ACA Ft. Stewart intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACA Ft. Stewart is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (+1 (555) 000-0000) or via email at contact@example.gov. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (+1 (555) 000-0000) or contact@example.gov. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New equipment ONLY, NO remanufactured products No partial shipments unless otherwise specified Agencies may require registration with the Central Contractor Registry (CCR) or to receipt of order. Information can be found at www.ccr.gov Your quote shall be for payment by Government VISA Credit Card, and the price quoted shall include all related charges. If you are unable to accept VISA for payment you shall respond back on your proposal that you do not have the ability to accept VISA. FOB Destination CONUS (CONtonental U.S.) Bid MUST be good for 30 calendar days after submission. Sellers must submit specifications and descriptive literature for all items to FedBid via email at contact@example.gov. Fax can be accepted upon request. Please call 1-877-9FEDBID. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition.The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. All furniture must be installed at the time of delivery. The government does not have adequate storage space available to allow for delivery without installation. The government will not accept any furniture delivery's without installation at the time of delivery and will return all furniture at the contractors expense. Contract awardee must submit an delivery and installation plan.